Cesca, Simone
Preferred name
Cesca, Simone
Main Affiliation
35 results
Filters
Settings
The search returned 35 results
Now showing 1 - 10 of 35
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The unprecedented Md = 4.4, 2024, Campi Flegrei earthquake highlights the fluids contribution to the ongoing unrest
(London: Nature Publishing Group UK, 2025-05-16); ; ;Rapagnani, Giacomo; The Campi Flegrei caldera has been experiencing volcanic unrest since 2005, rising concern in the population and in local and national authorities. On May 20, 2024, the largest local earthquake ever instrumentally recorded up to that time produced substantial damage, forcing the evacuation of tens of buildings west of the epicenter. At Campi Flegrei, M > 4 earthquakes are rare and their analysis is crucial to understand the unrest dynamics and the relation between rupture and ground shaking pattern, which is essential to mitigate the damage of future earthquakes. We analyse seismic waveforms at local to regional distances to reconstruct the source geometry and kinematics. We estimate millimetric to submillimetric coseismic surface subsidence– below the sensitivity of any standard geodetic technique– which, compared to the general uplift, highlights the crucial role of deep pressurized uids in earthquakes’ generation. Our results also indicate that rupture directivity and local ampli cation determined the damage distribution.6 25 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Source analysis of low frequency seismicity at Mt. Vesuvius by a hybrid moment tensor inversion
Seismicity at Mt. Vesuvius has been relatively weak in the last decades. While the occurrence of shallow volcanotectonic (VT) events at Mt. Vesuvius is well known, the occurrence of deeper low frequency events (LF) was only recently recognized. Previous source studies only targeted VT events, which were found to have quite heterogeneous focal mechanisms. In this paper, we perform for the first time the source inversion of LF seismicity at Mt. Vesuvius, analysing 27 LF events recorded from 2012 to 2021 with the aim to investigate their source processes. Given the challenges of analysing weak LF earthquakes, we implement a specific moment tensor (MT) inversion approach that combines the fit of displacement seismograms in the time domain and amplitude spectra in the frequency domain. The inversion is simultaneously performed for the source depth and moment tensor components in the 2–7 and 2–5 Hz frequency band, assuming either a full or deviatoric MT representation. Source parameter uncertainties are estimated by using a Bayesian bootstrapping scheme. Our results confirm a larger depth of LF events compared to VTs and show a strong heterogeneity of the LF seismic sources, which present various rupture types, different orientations and heterogeneous, whilst poorly resolved, non-double-couple components. The MT variability is qualitatively confirmed by significant differences among the recorded waveforms. The heterogeneity of both VT and LF source processes is attributed to complex source processes in a highly fractured seismogenic volume submitted to a heterogeneous stress field33 108 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 43 21 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Earthquake Fingerprint of an Incipient Subduction of a Bathymetric High
The resistance of bathymetric highs to subduction results in large-scale morphological distortions of the outer-rise, trench, and fore-arc regions. Once subducted, bathymetric highs induce frictional segmentation along the plate interface that may result in increase or decrease of the plate coupling. However, the mechanics of the collision is inferred mostly from geophysical and geological surveys since earthquakes rarely illuminate finer details of the subduction of seafloor relief. A year-long and energetic seismic sequence at the Loyalty Ridge (LR)-Vanuatu Trench allowed us to characterize how strain is released along the collision zone. Earthquakes revealed complex fracturing in the outer-rise and fore-arc regions and segmentation of the interface with both limited magnitude events and aftershock productivity. The complex earthquake activity associated to the collision and subduction of the LR appears to support a frictionally segmented interface where Mw ≥ 8 megathrust earthquakes are unlikely to nucleate.26 273 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Parametri sorgente e genesi del terremoto Mw4 a Montesano (Val d'Agri)
In data 27 Ottobre 2017 si è verificato un evento sismico di Mw 4 con epicentro a Montesano sulla Marcellana (Basilicata), ad una distanza di meno di 10 km dal bordo esterno della concessione idrocarburi Val d'Agri (VA). Trattandosi di un terremoto localizzato al di fuori del Dominio Esteso di monitoraggio (Indirizzi e Linee Guida del MiSE), la rilevanza di tale evento e possibili nessi con le attività di produzione di Oil&Gas non erano stati approfonditi. Considerando che nel passato la Val d'Agri e il Vallo del Diano sono stati colpiti da eventi con magnitudo superiore a M>6.5, è utile studiare terremoti moderati nell'area in oggetto, ai fini di contribuire a migliorare la caratterizzazione della pericolosità sismica, potenzialmente distruttiva. Approfittando della presenza di un elevato numero di stazioni sismiche operative nell'area della VA e dintorni, analizziamo i parametri sorgente del l'evento principale Mw 4, applicando tecniche sismologiche avanzate per stimare le incertezze associate all'inversione del momento tensore (MT) e per identificare plausibili effetti di direttività. Il MT è dominato da un meccanismo di faglia normale, orientato in direzione NW-SE, con una profondità ipocentrale del centroide di 14 km. L'unico aftershock registrato (ML 2.1) è stato usato come funzione di Green empirica, ai fini di calcolare la funzione temporale apparente della sorgente (ASTF - apparent source time function) dell'evento principale. Durate apparenti in un range tra 0.11 -- 0.21 s (derivate da onde-S) definiscono un pattern azimutale, che indica una rottura asimmetrica bilaterale, con 70% della propagazione in direzione N310$\,^{\circ}$W, suggerendo un piano di rottura immergendo verso sudovest. I nostri risultati evidenziano che il terremoto di Mw 4 a Montesano sulla Marcellano ha attivato un segmento di faglia più profondo, vicino al basamento, eventualmente associato con l'Eastern Agri Fault System. Il basso potenziale di trigger (meno del 10%) provocato dallo stress associato all'esaurimento del giacimento, rende improbabile la possibilità di un evento indotto o innescato per via dell'estrazione trentennale di idrocarburi dal reservoir VA e suggerisce piuttosto un'origine naturale provocato da stress tettonico locale.109 69 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , On the origin of micro-earthquakes in geothermal areas (OMEGA): first results from a seismic experiment at Mt. Amiata (Italy)
In a joint project called OMEGA, between GFZ-Potsdam and the Istituto Nazionale di Geofisica e Vulcanologia (INGV), an experimental seismic monitoring system was installed in 2015 near the power plants of the geothermal area of Mt. Amiata (central Italy). The main objectives of this three-year experiment are: i) to monitor the seismic activity connected to any type of seismicity inside the geothermal field, ii) to verify if the low local seismicity rate near Mt. Amiata reported by the INGV bulletin is natural, or due to the sparse distribution of the INGV network, and iii) to discriminate natural from possibly induced seismicity. The eight-station network was extended by a sevenelement seismic array for the first four weeks. The aim of this paper is to present the first automatic hypocentre locations of the joint network/array analysis.356 335 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Deciphering the source parameters and genesis of the 2017, Mw 4 Montesano earthquake close to the Val d’Agri Oilfield (Italy)
On October 27th, 2017, a Mw 4 earthquake occurred close to the municipality of Montesano sulla Marcellana, less than 10 km external to the concession of the largest European on-shore hydrocarbon reservoir - the Val d'Agri oilfield (Southern Italy). Being a weak event located outside the extended monitoring domain of the industrial concession, the relevance of this earthquake and possible links with the hydrocarbon exploitation were not deepened. The study of weak to moderate earthquakes can improve the characterization of the potentially destructive seismic hazard of this particular area, already struck by M>6.5 episodes in the past. Taking advantage of a wide coverage of seismic stations deployed in the VA region, we analyze the source parameters of this Mw 4 earthquake applying advanced seismological techniques to estimate the uncertainties derived from the moment tensor inversion and identify plausible directivity effects. The moment tensor is dominated by a NW-SE oriented normal faulting with a centroid depth of 14 km. A singleML 2.1 aftershock was recorded and used as empirical Green function to calculate the apparent source time function for the mainshock. Apparent durations (in the range 0.11 - 0.21 s, obtained from S-waves) define an azimuthal pattern which reveals an asymmetric bilateral rupture with the70% of the rupture propagation in the N310$\,^{\circ}$W direction, suggesting a rupture plane dipping to the SW. Our results conclude that the Montesano earthquake activated a deeper fault segment associated to the Eastern Agri Fault System close to the basement. The relative low trigger potential below 10% based on depletion-induced stress changes discards an induced or triggered event due to the long-term hydrocarbon extraction in the Val d'Agri oilfield, and it rather suggests a natural cause due to the local tectonic stress.114 85 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , On the Source Parameters and Genesis of the 2017, Mw 4 Montesano Earthquake in the Outer Border of the Val d’Agri Oilfield (Italy)
(2021-03-11); ; ; ; On October 27, 2017, an Mw 4 earthquake occurred close to the municipality of Montesano sulla Marcellana, less than 10 km external to the concession of the largest European onshore hydrocarbon reservoir—the Val d’Agri oilfield (Southern Italy). Being a weak event located outside the extended monitoring domain of the industrial concession, the relevance of this earthquake and the possible links with the hydrocarbon exploitation were not extensively discussed. Actually, the analysis of shallow seismic events close to subsurface exploitation domains plays a significant role in the definition of key parameters in order to discriminate between natural, triggered, and induced seismicity, especially in tectonically active regions. The study of weak-to-moderate earthquakes can improve the characterization of the potentially destructive seismic hazard of this particular area, already struck by M > 6.5 episodes in the past. In this work, we analyze the source parameters of this Mw 4 earthquake by applying advanced seismological techniques to estimate the uncertainties derived from the moment tensor inversion and identify plausible directivity effects. The moment tensor is dominated by a NW–SE oriented normal faulting with a centroid depth of 14 km. A single ML 2.1 aftershock was recorded and used as the empirical Green’s function to calculate the apparent source time function for the mainshock. Apparent durations (in the range 0.11–0.21 s, obtained from S-waves) define an azimuthal pattern, which reveals an asymmetric bilateral rupture with 70% of the rupture propagation in the N310°Wdirection, suggesting a rupture plane dipping to the SW. Our results tally with the activation of a deeper fault segment associated with the Eastern Agri Fault System close to the basement as the origin of the Montesano earthquake. Finally, the Coulomb stress rate induced by depletion of the oilfield is calculated to quantify the trigger potential estimated for the Montesano earthquake yielding relatively low probabilities below 10%. Our analyses point toward the conclusion that the Mw 4 event was more likely due to the local natural tectonic stress, rather than induced or triggered by the long-term hydrocarbon extraction in the Val d’Agri oilfield.190 96 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Repeating earthquakes and ground deformation reveal the structure and triggering mechanisms of the Pernicana fault, Mt. Etna
Structure and dynamics of fault systems can be investigated using repeating earthquakes as repeatable seismic sources, alongside ground deformation measurements. Here we utilise a dataset of repeating earthquakes which occurred between 2000 and 2019 along the transtensive Pernicana fault system on the northeast flank of Mount Etna, Italy, to investigate the fault structure, as well as the triggering mechanisms of the seismicity. By grouping the repeating earthquakes into families and integrating the seismic data with GPS measurements of ground deformation, we identify four distinct portions of the fault. Each portion shows a different behaviour in terms of seismicity, repeating earthquakes and ground deformation, which we attribute to structural differences including a segmentation of the fault plane at depth. The recurrence intervals of repeating earthquake families display a low degree of regularity which suggests an episodic triggering mechanism, such as magma intrusion, rather than displacement under a constant stress.878 29 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Microsismicità osservata nell’area geotermica del Monte Amiata (Toscana)
(2019-11-12); ; ; ; Il Monte Amiata, ubicato nella porzione sud-occidentale della regione Toscana, è un edificio vulcanico che si è strutturato durante la parte finale del Pleistocene medio (350 - 200 ka; Laurenzi et al., 2015; Principe et al., 2018) al di sopra delle unità tettoniche strutturatesi durante le fasi mio-plioceniche dell’orogenesi appenninica. La distribuzione dei centri eruttivi sembra essere controllata da una zona di debolezza strutturale plio-pleistocenica, orientata circa NE-SW, che interessa sia i depositi vulcanici che le unità strutturali sottostanti (Brogi & Fabbrini, 2009, Brogi et al., 2015; Piccardi et al., 2017, Principe et al., 2018). Il gradiente geotermico è caratterizzato da valori molto alti (fino a 15°/100m), rendendo l’area particolarmente idonea per la produzione di energia geotermica. La produzione geotermica iniziò a partire dal 1960. Attualmente, gli impianti produttivi di ENEL- Greenpower di Bagnore e Piancastagnaio (Fig. 1), sfruttano un serbatoio geotermico collocato tra i 2000 e i 3500 metri di profondità rispetto al piano campagna. Il Catalogo Parametrico dei Terremoti Italiani (CPTI; Rovida et al., 2016 riporta, tra il 1287 e il 1940, 13 terremoti con una magnitudo equivalente compresa tra 4.5 £ Me £ 5.3 che hanno causato danneggiamenti fino al grado VIII MCS (Fig. 1), evidenziando un’attività sismica naturale e capace di causare seri danneggiamenti, ben prima dell’inizio dello sfruttamento geotermico dell’area. La sismicità recente, registrata dalla rete sismica nazionale dell’INGV (Castello et al., 2006; http://cnt.rm.ingv.it), riporta meno di 150 terremoti nell’area amiatina negli ultimi 25 anni, di cui 35 eventi con ML ≥ 1.5. Tra questi, il terremoto del 1.4.2000 (Md=4.0; http://cnt.rm.ingv.it/event/1132509) causò danni ad oltre 50 edifici, e la prossimità dell’epicentro con l’impianto di produzione di Piancastagnaio sollevò l’ipotesi di una sua natura antropogenica (Mucciarelli et al. 2001). Braun et al. (2018) hanno ricalcolato ipocentro e meccanismo focale di questo evento, collocandolo ad una profondità prossima al serbatoio di produzione, giungendo però alla conclusione che non sia possibile, per questa via, discriminare la sua natura antropogenica o meno. In generale, rispetto alle profondità tipiche della sismicità crostale osservata in Toscana (tra circa 5 e 13 km) gli ipocentri degli eventi sismici registrati nell’area amiatina hanno delle profondità simili a quelle di produzione (< 5 km). La bassa densità della rete di monitoraggio INGV in quest’area del territorio nazionale (Fig. 1) è causa, comunque, di una bassa capacità di rilevazione (detection) sismica e di una altrettanto bassa capacità di risoluzione ipocentrale. Per migliorare le capacità di detection e di monitoraggio sismico nell’area del Monte Amiata, nel periodo 2015 - 2018 abbiamo installato una rete locale composta da 8 stazioni in vicinanza delle centrali di produzione geotermica di Bagnore e Piancastagnaio. L’obiettivo dell’esperimento era quello di abbassare la magnitudo di completezza e di comprendere meglio l’origine della sismicità in vicinanza degli impianti di estrazione, cercando di discriminare tra sismicità naturale e eventi sismici antropogenici. A questo scopo, abbiamo applicato una metodologia di analisi automatica, scansionando l’enorme dataset con un nuovo e robusto approccio di detection e localizzazione, chiamato waveform beam-forming grid search approach (LASSIE; Heimann et al., 2017). In uno step successivo, gli eventi sismici associati vengono rilocalizzati con un waveform-based locator (LOKI: Grigoli et al. 2014). Il catalogo sismico così ottenuto, aggiornato e molto più completo rispetto a quanto mai ottenuto prima in termini di Magnitudo di completezza (Mc), rappresenta la base per definire criteri di discriminazione, ad esempio attraverso la correlazione spazio-temporale della sismicità osservata con i parametri di produzione geotermica. I risultati ottenuti e le potenzialità di tale approccio saranno oggetto della presentazione qui proposta.167 233
