Skip to main content
The search returned 22 results
Now showing 1 - 10 of 22
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Testing the "PRESTo" Early Warning Algorithm in North-Eastern Italy, Austria and Slovenia: update analysis

    Since 2002 OGS (Istituto Nazionale di Oceanografia e di Geofisica Sperimentale) in Udine (Italy), the Agencija Republike Slovenije za Okolje (ARSO) in Ljubljana (Slovenia) and the Zentralanstalt für Meteorologie und Geodynamik (ZAMG) in Vienna (Austria), are collecting, analyzing, archiving and exchanging seismic data in real time. The data exchange has proved to be effective and very useful in case of seismic events at the borders between Italy, Austria and Slovenia, where the poor coverage of individual national seismic networks precluded a precise earthquake location, while the usage of common data from the integrated networks improves significantly the overall capability of real time event detection and rapid characterization in this area. In order to extend the seismic monitoring in North-eastern Italy, Slovenia and Southern Austria, towards earthquake early warning applications, at the end of 2013 OGS, ARSO and ZAMG teamed with the RISSCLab group (http://www.rissclab.unina.it) of the Department of Physics at the University of Naples Federico II in Italy. The collaboration focuses on massive testing on OGS, ARSO and ZAMG data of the EW platform PRESTo (Probabilistic and Evolutionary early warning SysTem) developed by RISSC-Lab (http://www.prestoews.org).
      342  354
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Community Stress-Drop Validation Study—Part II: Uncertainties of the Source Parameters and Stress Drop Analysis

    As part of the community stress‐drop validation study, we evaluate the uncertainties of seismic moment M0 and corner frequency fc for earthquakes of the 2019 Ridgecrest sequence. Source spectra were obtained in the companion article by applying the spectral decomposition approach with alternative processing and model assumptions. The objective of the present study is twofold: first, to quantify the impact of different assumptions on the source parameters; and second, to use the distribution of values obtained with different assumptions to estimate an epistemic contribution to the uncertainties. Regarding the first objective, we find that the choice of the attenuation model has a strong impact on fc results: by introducing a depth‐dependent attenuation model, fc estimates of events shallower than 6 km increase of about 10%. Also, the duration of the window used to compute the Fourier spectra show an impact on fc ⁠: the average ratio between the estimates for 20 s duration to those for 5 s decreases from 1.1 for Mw<3 to 0.66 for Mw>4.5. For the second objective, we use a mixed‐effect regression to partition the intraevent variability into duration, propagation, and site contributions. The standard deviation ϕ of the intraevent residuals for log(fc) is 0.0635, corresponding to a corner frequency ratio 102ϕ=1.33. When the intraevent variability is compared to uncertainties on log(fc), we observe that 2ϕ is generally larger than the 95% confidence interval of log(fc), suggesting that the uncertainty of the source parameters provided by the fitting procedure might underestimate the model‐related (epistemic) uncertainty. Finally, although we observe an increase of log(Δσ) with log(M0) regardless of the model assumptions, the increase of Δσ with depth depends on the assumptions, and no significant trends are detected when depth‐dependent attenuation and velocity values are considered.
      78  238
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The RAMONES Service for Rapid Assessment of Seismic Moment and Radiated Energy in Central Italy: Concepts, Capabilities, and Future Perspectives

    We present Rapid Assessment of MOmeNt and Energy Service (RAMONES), a service for disseminating through a web interface, the estimates of seismic moment (⁠M0⁠) and radiated energy (⁠ER⁠) for earthquakes occurring in central Italy with local magnitudes above 1.7. The service is based on a fully‐automatic procedure developed for downloading and processing open seismological data from the European Integrated Data Archive, Italian Civil Protection repository, and Incorporated Research Institutions for Seismology (IRIS). In its actual configuration, RAMONES uses the seismic catalog generated through the event webservice of the Italian Institute of Geophysics and Volcanology (compliant with International Federation of Digital Seismograph Networks standards) to guide the data download. The concept of RAMONES is to estimate M0 and ER from features extracted directly from recordings, namely the S‐wave peak displacement (⁠PDS⁠) and the integral of the squared velocity (⁠IV2S⁠) evaluated over the S‐wave window at local distances. A data set composed of 6515 earthquakes recorded in central Italy between 2008 and 2018 was used to calibrate the attenuation models relating M0 to PDS and ER to IV2S⁠, including station corrections. The calibration values for M0 and ER were extracted from the source spectra obtained by applying a decomposition approach to the Fourier amplitude spectra known as the generalized inversion technique. To test the capabilities of RAMONES, we validate the attenuation models by performing residual analysis over about 60 earthquakes occurring in 2019 that were used for the spectral decomposition analysis but not considered in the calibration phase. Since January 2020, a testing operational phase has been running, and RAMONES has analyzed about 800 earthquakes by September 2020. The distribution of the source parameters and their relevant scaling relationships are automatically computed and disseminated in the form of maps, parametric tables, figures, and reports available through the RAMONES web interface.
      96  295
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Community Stress-Drop Validation Study—Part I: Source, Propagation, and Site Decomposition of Fourier Spectra

    As part of the community stress-drop validation study initiative, we apply a spectral decomposition approach to isolate the source spectra of 556 events occurred during the 2019 Ridgecrest sequence (Southern California). We perform multiple decompositions by introducing alternative choices for some processing and model assumptions, namely: three different S-wave window durations (i.e., 5 s, 20 s, and variable between 5 and 20 s); two attenuation models that account differently for depth dependencies; and two different site amplification constraints applied to restore uniqueness of the solution. Seismic moment and corner frequency are estimated for the Brune and Boatwright source models, and an extensive archive including source spectra, site amplifications, attenuation models, and tables with source parameters is disseminated as the main product of the present study. We also compare different approaches to measure the precision of the parameters expressed in terms of 95% confidence intervals (CIs). The CIs estimated from the asymptotic standard errors and from Monte Carlo resampling of the residual distribution show an almost one-to-one correspondence; the approach based on model selection by setting a threshold for misfit chosen with an F-ratio test is conservative compared to the approach based on the asymptotic standard errors. The uncertainty analysis is completed in the companion article in which the outcomes from this work are used to compare epistemic uncertainty with precision of the source parameters.
      94  344
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Insights into Mechanical Properties of the 1980 Irpinia Fault System from the Analysis of a Seismic Sequence

    Seismic sequences are a powerful tool to locally infer geometrical and mechanical properties of faults and fault systems. In this study, we provided detailed location and characterization of events of the 3–7 July 2020 Irpinia sequence (southern Italy) that occurred at the northern tip of the main segment that ruptured during the 1980 Irpinia earthquake. Using an autocorrelation technique, we detected more than 340 events within the sequence, with local magnitude ranging between −0.5 and 3.0. We thus provided double difference locations, source parameter estimation, and focal mechanisms determination for the largest quality events. We found that the sequence ruptured an asperity with a size of about 800 m, along a fault structure having a strike compatible with the one of the main segments of the 1980 Irpinia earthquake, and a dip of 50–55° at depth of 10.5–12 km and 60–65° at shallower depths (7.5–9 km). Low stress drop release (average of 0.64 MPa) indicates a fluid-driven initiation mechanism of the sequence. We also evaluated the performance of the earthquake early warning systems running in real-time during the sequence, retrieving a minimum size for the blind zone in the area of about 15 km.
      43  95
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismic input motion determined from a surface-downhole pair of sensors: a constrained deconvolution approach.

    (2010-06) ; ; ; ;
    Bindi, D.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Milano-Pavia, Milano, Italia
    We apply a deconvolution approach to the problem of determining the input motion at the base of an instrumented borehole using only a pair of recordings, one at the borehole surface and the other at its bottom. To stabilize the bottom-tosurface spectral ratio, we apply an iterative regularization algorithm that allows us to constrain the solution to be positively defined and to have a finite time duration. Through the analysis of synthetic data, we show that the method is capable of retrieving reliable input motion, suppressing the effect of the negative interference generated by the downgoing waves. Results obtained by applying the methodology to weak earthquakes recorded at the Ataköy (Istanbul) vertical array are also presented and show that removing the effect of the downgoing waves is remarkable, even considering the recording at a depth of 140 m.
      112  589
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Performance of Earthquake Early Warning Systems during the 2016–2017 Mw 5–6.5 Central Italy Sequence

    Earthquake early warning systems (EEWSs) are nowadays contributing to seismic risk mitigation actions, both in terms of losses and societal resilience, by issuing an alert promptly after the earthquake origin and before the ground-shaking impacts the target to be protected. In this work, we analyze the performance of network-based and stand-alone (on-site) early warning systems during the 2016–2017 central Italy sequence, characterized by events with magnitude as large as 6.5. For the largest magnitude event, both systems predict well the ground shaking nearby the event source, with a rate of success in the 85%–90% range, within the potential earthquake damage zone. However, the lead time, that is, the time available for security actions, is significantly larger for the network-based system. For the regional system, it increases to more than 10 s at 40 km from the event epicenter. The stand-alone system performs better in the near-source region, still showing a positive albeit small lead time (<2 s). Far away from the source (>60 km), the performances slightly degrade, mostly owing to the large uncertainty in the attenuation relationships. This study opens up the possibility for making an operational EEWS in Italy, based on the available acceleration networks, provided that the delay due to data telemetry has to be reduced.
      771  13
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Surface wave surveys for seismic site characterizationof accelerometric stations in ITACA

    This paper reports on site characterization for a set of accelerometric stations of the RAN (Italian accelerometric network) with specific attention to the shear wave velocity profile. The latter is indeed of primary importance for the usability of the accelerometric database. Surface wave analysis has been chosen as the primary investigation method since it offers the possibility of reaching the required accuracy with reasonable costs. A range of different techniques, both of the active-source and passive-source types, has been adopted to cope with the objectives of the characterization in relation to specific geological settings. Quality assessment of experimental data has been implemented to check the consistency of the measurements also with respect to the fundamental hypotheses of the method. Strategies to improve the reliability and robustness of the surface wave data inversion were exploited in order to mitigate problems arising from solution non-uniqueness and influence of higher modes in the propagation. Comparisons with independent borehole tests, available at some specific sites, confirm the reliability of the results. Although the research program covered only a subset of the network, the obtained results show the importance of specific experimental investigations aimed at estimating the shear wave velocity profile. Indeed the results lead to a re-classification of several sites with respect to the preliminary classification based on surface geology. Within this context, four selected case histories are reported in the present paper.
      186  47
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Site effect assessment in Bishkek (Kyrgyzstan) using earthquake and noise recording data

    Kyrgyzstan, which is located in the collision zone between the Eurasian and Indo-Australian lithosphere plates, is prone to large earthquakes as shown by its historical seismicity. Hence, an increase in the knowledge and awareness by local authorities and decision makers of the possible consequence of a large earthquake, based on improved seismic hazard assessments and realistic earthquake risk scenarios, is mandatory to mitigate the effects of an earthquake. To this regard, the Central Asia Cross-Border Natural Disaster Prevention (CASCADE) project aims to install a cross- border seismological and strong motion network in Central Asia and to support microzonation activities for the capitals of Kyrgyzstan, Uzbekistan, Kazakhstan, Tajikistan, and Turkmenistan. During the first phase of the project, a temporary seismological network of 19 stations was installed in the city of Bishkek, the capital of Kyrgyzstan. Moreover, single-station noise recordings were collected at nearly 200 sites. In this study, the site amplifications occurring in Bishkek are assessed by analyzing 56 earthquakes extracted from the data streams continuously acquired by the network, as well as from the single-station noise measurements. A broadband amplification (starting at ∼0:1 and 0.2 Hz), is shown by the standard spectral ratio (SSR) results of the stations located within the basin. The reliability of the observed low-frequency amplification was validated through a time–frequency analysis of denoised seismograms. Discrepancies between horizontal-to-vertical spectral ratio and SSR results are due to the large amplification of the vertical component of ground motion, probably due to the effect of converted waves. The single-station noise results, once their reliability was assessed by their comparison with the earthquake data, have been used to produce the first fundamental resonance frequency map for Bishkek, whose spatial variation shows a good agreement with the presence of an impedance contrast within the Tertiary sedimentary cover.
      190  749
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    ask 6 - Gubbio - Deliverable D21: Geological model of the Gubbio basin (Italy) for the characterization of local seismic response

    Within the framework of the project S3 “Ground shaking scenarios for some strategic areas in Italy-Task6” the town of Gubbio has been selected as a test site to compute ground motion taking into account finite fault and site effects. Gubbio is located in central Italy, on the northern slopes of one of the many valleys characterising the central Appennines. The historical settlement is located on a rocky slope, while new developments extend on the Quaternary fluvio-lacustrine deposits filling the basin. The Gubbio basin was chosen as a test site for a number of reasons: its geomorphological setting is very common in central and southern Italy, the area is characterised by frequent near events of moderate magnitude (Mmax 6) and large amplifications were observed there for the Colfiorito seismic sequence of the 1997/98. In order to understand the mechanisms controlling the 3D seismic response of the basin, a subsurface model has been constructed. The reconstruction of the model has been done using data coming from different surveys (figure A). Several active and passive seismic measurements have been carried out in the plain, also favoured by the intense seismic activity typical of the area. These investigations mainly consisted of monitoring activities of 4 temporary transects of seismometric stations, operating between June 2005 and May 2006 and described in detail in PS3- Deliverables D22-D23. Two transects have been positioned perpendicularly to the valley axes (GFZ and Ge2 Transects), one parallel (INGV transect) and one near Gubbio (Ge1 transect). More than 300 local and regional earthquakes have been recorded, with maximum magnitude equal to 4. A 2D array was run as well from June to September 2006, to better understand the generation of surface waves. All data are collected in a GIS (Progetto S3 Deliverable D23) Parallel to these activities, ambient noise data have been collected in the field for 90 sites, using the single station technique for the estimation of the fundamental resonance frequencies. Furthermore, 4 noise measurements with a seismic array have been collected to build an S-wave velocity profile of soft sediments, considered representative for the whole plain. The geometry of the basin below 500 m of depth has been investigated through the acquisition of an active seismic line 4.5 km long, in correspondence of one of the transects. This has been used to perform a tomography of arrival times which allowed to recognise the position and shape of the reflecting horizons. As a final step the first 30 metres of deposits have been characterised over a 30 km2 area, using both stratigraphic investigations provided by the Gubbio Municipality and data collected from in-situ surveys and lab tests. In this deliverable we describe the input data for the 3D model of the Gubbio basin and we outline the steps performed to define the geometry, the layers and their seismic properties on the base of the experimental data collected during the project and of the available geological information.
      302  652