Skip to main content
The search returned 29 results
Now showing 1 - 10 of 29
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Insights Into Venus' Crustal Plateaus From Dyke Trajectories Below Craters

    On Venus, radar observations of the surface have highlighted two categories of craters: bright-floored, interpreted as pristine, and dark-floored, interpreted as being partially filled by lava. While volcanic resurfacing occurs within and outside craters in the plains, it seems mainly concentrated within the interior of dark-floored craters in the crustal plateaus, suggesting that the magma is negatively buoyant there. Indeed, crater unloading may facilitate vertical ascent of a negatively buoyant magma by decompressing the underlying crust. However, the crater topography also generates a shear stress which would tend to horizontalize the vertical propagation of a dyke. We use numerical simulations of magma ascent in an axisymmetric crater stress field to demonstrate that, depending on the crust thickness and the magma-crust density contrast, a negatively buoyant magma can indeed erupt only in the crater interior while remaining stored in the crust elsewhere. In particular, we identify four different behaviors depending on if and where a magma-filled crack ascending below a crater reaches the surface. We draw a regime diagram as a function of two characteristic dimensionless numbers. For eruption to occur only in the crater interior requires a crust thinner than 45 km and a limited range of magma-crust density contrasts, between 40 and 280 kg m−3 for crust thicknesses between 20 and 45 km, the permissible range decreasing for increasing crustal thicknesses. These results suggest that the crustal plateaus may not be particularly thick and could be slightly differentiated, but probably not very felsic.
      45  109
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Dynamics of magmatic intrusion: what can we learn from the comparison of analog and numerical models?

    This study investigates the dynamics of magmatic intrusions based on the joint analysis of analog and numerical models.By injecting different fluids from the bottom of a solidified gelatin block, we simulate the propagation of magmatic intrusions through the crust and record their shapes, trajectories, and velocity as they rise towards the surface. Additionally, we make use of a 2D fluid-filled crack propagation model constrained by our experimental observations. The numerical simulations demonstrate that our viscous fluid-filled crack experiments, conducted with silicon-oil injections, propagate in the same regime as typical basaltic intrusions. The comparison between analog and numerical results allow us to define the domain of validity of the numerical model and its limit of applicability. This study provides new insights into the processes that control the propagation of magmatic intrusions and our ability to reproduce them using analog and numerical models.
      71  116
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Spatio-temporal evolution of rift volcanism controlled top-down by a deepening graben

    Volcanism in continental rifts is generally observed to shift over time from the inside of the basin to its flanks and vice versa, but the controls on these switches are still unclear. Here we use numerical simulations of dike propagation to test the hypothesis that the spatio-temporal evolution of rift volcanism is controlled by the crustal stresses produced during the development of the rift basin. We find that the progressive deepening of a rift rotates the direction of the principal stresses under the basin, deflecting ascending dikes. This causes an early shift of volcanism from the inside of the graben to its flanks. The intensification of this stress pattern, due to further deepening of the basin, promotes the formation of lower crustal sill-like intrusions that can stack under the rift, shallowing the depth at which dikes nucleate, eventually causing a late stage of in-rift axial volcanism. Given the agreement between our model results and observations, we conclude that the temporal shifts in the location of rift volcanism are controlled to first order by the elastic stresses developing in the crust as the rift matures. We thereby suggest that geodynamic models should account for elasticity and the redistribution of surface loads in order to effectively reproduce rift-related magmatism.
      63  168
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Modeling the Shape and Velocity of Magmatic Intrusions, a New Numerical Approach

    Dykes are magma-filled fractures propagating through the brittle crust. Understanding the physics of dyking process is essential to mitigate the volcanic hazard associated with the opening of new eruptive fissures at the surface. Often, physics-based models view either fracturing of the host rock or viscous flow of the magma as the dominating energy sink during dyke propagation. Here, we provide a numerical model that captures the coupling of fracturing at the crack tip and the transport of a viscous fluid. Built with the boundary element technique, our model allows for computation of the shape and velocity of a growing fluid-filled crack accounting for the viscosity of the fluid: the fluid flow induces a viscous pressure drop acting at the crack walls, and modifies the shape of the crack. The energy conservation equation provides the constraints to solve for the crack growth velocity, assuming that brittle fracturing and viscous flow are the main processes that dissipate energy. Using a parameter range that represents typical magmatic intrusions, we obtain crack shapes displaying some typical characteristics, including a tear-drop head and an open tail that depend on rock rigidity, magma viscosity, and buoyancy. We show that viscous forces significantly contribute to the energy dissipated during the propagation of magmatic dykes. Applied to the 1998 intrusion at Piton de la Fournaise (La Réunion Island), we provide ranges of dyke lengths and openings by adjusting the numerical velocity to the one deduced from the migration of volcano-tectonic events.
      115  75
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      43  21
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Buoyancy Versus Local Stress Field Control on the Velocity of Magma Propagation: Insight From Analog and Numerical Modelling

    Magmatic dykes interact with heterogeneous crustal stress. As a result, their propagation towards the surface can be tortuous and their propagation velocity may vary. While the deflection of dykes in response to the local stress field has been addressed by several studies, less has been done about the effect on their propagation velocity. Understanding under which conditions an intrusion may accelerate or decelerate due to crustal stress heterogeneities has obvious important implications in terms of forecasting the timing of the onset of the eruption. Here we analyse the velocity of fluid-filled crack propagation in a gelatin block characterized by a heterogenous stress field considering the case study of a load applied at the surface. We find that a crack deflected towards the load and its underlying compressive stress field is decelerated. By comparing experimental results with numerical solutions, we evidence the potential complementary role played by stress field variations and changes in trajectory orientation, controling the buoyancy, on the velocity of magma propagation. We also show that the energy release estimated along the crack path by simplified numerical models appears to be a good proxy for the velocity. We conclude that numerical models allowing for magma path estimations could also be used to infer magma velocity variations. In addition, 1D numerical models solving for the fluid flow along a prescribed path, provide velocity variation as a function of the surrounding stress field and the magma driving pressure.
      113  65
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Characterizing the physical properties of gelatin, a classic analog for the brittle elastic crust, insight from numerical modeling

    Precise characterization of the mechanical properties of gelatin, a classic analog of the elastic crust, is necessary for scaling the mechanical models of the Earth's crust behavior in laboratory experiments. Here we reassess how to accurately calculate the Young modulus (E) of gelatin contained in experimental tanks. By means of dedicated analog experiments and finite element simulations, we estimate the bias introduced by using equations appro­ priate for a half-space to interpret the subsidence due to a cylindrical surface load applied on the gelatin. In the case of a standard experimental setup with gelatin adhering to the tank wall, we find E is overestimated by at least 5% for a box with lateral size smaller than 20 times the cylinder diameter. In addition, we deduce a correction factor to be applied when using an analytical formula. We confirm that measuring the shear velocity leads to accurate estimates for the rigidity of gelatin. We also propose a new method for in situ Young's modulus estimation, relying on the length of air-filled propagating crack. Indeed, for a given injected volume, this length depends only on the density contrast between air and gelatin and on the Young's modulus of the gelatin. The fracture toughness of the gelatin is estimated independently. Direct comparison between fracture toughness and Young's modulus shows that for a given Young's modulus, salted gelatin has a higher fracture toughness than unsalted gelatin.
      192  107
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Editorial: Seismicity in Volcanic Areas

    Seismic activity (e.g., earthquakes, tremors) beneath volcanic areas is primarily caused by the dynamic interaction of molten rock and hydrothermal fluids with the solid host rock, by fracturing and fragmentation of the magma itself, and by tectonic processes interacting with the volcano. In addition, near-surface phenomena such as explosions and rockfalls at a volcanic edifice also produce seismic events. At volcano observatories globally, the real-time monitoring of the spatial and temporal patterns of seismic events is an essential geophysical tool to quantify the state of unrest, and forecast eruptions successfully. Seismic waveforms, earthquake catalogues and earthquake ray-path properties commonly supplement this tool to model the complex processes responsible for the earthquakes quantitatively, and to image subsurface magmatic and tectonic structures. Independent constraints provided by other disciplines such as geodesy and structural geology also significantly help scientists to understand the volcanic processes. Recent advances in earthquake recording technology, computing power and algorithms in artificial intelligence, allow processing and interpretation of large and complex multi-parametric datasets and scenarios.
      175  54
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Poroelastic model in a vertically sealed gas storage: a case study from cyclic injection/production in a carbonate aquifer

    Natural gas can be temporarily stored in a variety of underground facilities, such as depleted gas and oil fields, natural aquifers and caverns in salt rocks. Being extensively monitored during operations, these systems provide a favourable opportunity to investigate how pressure varies in time and space and possibly induces/triggers earthquakes on nearby faults. Elaborate and detailed numerical modelling techniques are often applied to study gas reservoirs. Here we show the possibilities and discuss the limitations of a flexible and easily formulated tool that can be straightforwardly applied to simulate temporal pore-pressure variations and study the relation with recorded microseismic events. We use the software POEL (POroELastic diffusion and deformation) which computes the poroelastic response to fluid injection/extraction in a horizontally layered poroelastic structure. We further develop its application to address the pres- ence of vertical impermeable faults bounding the reservoir and of multiple injection/extraction sources. Exploiting available information on the reservoir geometry and physical parameters, and records of injection/extraction rates for a gas reservoir in southern Europe, we perform an extensive parametric study considering different model configurations. Comparing modelled spatiotemporal pore-pressure variations with in situ measurements, we show that the inclusion of vertical impermeable faults provides an improvement in reproducing the observations and results in pore-pressure accumulation near the faults and in a variation of the temporal pore- pressure diffusion pattern. To study the relation between gas storage activity and recorded local microseismicity, we applied different seismicity models based on the estimated pore- pressure distribution. This analysis helps to understand the spatial distribution of seismicity and its temporal modulation. The results show that the observed microseismicity could be partly linked to the storage activity, but the contribution of tectonic background seismicity cannot be excluded.
      170  184
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The rebirth and evolution of Bezymianny volcano, Kamchatka after the 1956 sector collapse

    Continued post-collapse volcanic activity can cause the rise of a new edifice. However, details of such edifice rebirth have not been documented yet. Here, we present 7-decade-long photogrammetric data for Bezymianny volcano, Kamchatka, showing its evolution after the 1956 sector collapse. Edifice rebirth started with two lava domes originating at distinct vents ~400 m apart. After 2 decades, activity became more effusive with vents migrating within ~200 m distance. After 5 decades, the activity focused on a single vent to develop a stra- tocone with a summit crater. We determine a long-term average growth rate of 26,400 m 3 / day, allowing us to estimate the regain of the pre-collapse size within the next 15 years. Numerical modeling explains the gradual vents focusing to be associated with loading changes, affecting magma pathways at depth. This work thus sheds light on the complex regrowth process following a sector collapse, with implications for regrowing volcanoes elsewhere.
      300  99