Skip to main content
The search returned 18 results
Now showing 1 - 10 of 18
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Investigating the Origin of Seismic Swarms

    According to the U.S. Geological Survey’s Earthquake Hazards Program, a seismic swarm is “a localized surge of earth- quakes, with no one shock being conspicuously larger than all other shocks of the swarm. They might occur in a variety of geologic environments and are not known to be indicative of any change in the long- term seismic risk of the region in which they occur” (http://vulcan.wr.usgs.gov/Glossary/ Seismicitydescription_earthquakes.html). The definition reveals how little is actually known about seismic swarms. For example, could certain seismic settings be more prone to swarms? Could a fault zone prone to large energetic earthquakes release part of its stress through seismic swarms? Do swarms keep hazards in balance, or could their onset increase hazards? To gain insight into the nature of seismic swarms in nonvolcanic areas and to better understand their influence on seismic hazards, the Istituto Nazionale di Geofisica e Vulcanologia (INGV) and the German Research Centre for Geoscience (GFZ) began a combined research project within the framework of the Network of European Research Infrastructures for Earthquake Risk Assessment and Mitigation (NERA; see http:// www.nera-eu.org/). The project focused on monitoring swarm activity occurring in the Pollino range in Southern Apennines, Italy.
      722  44
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      43  21
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The 2011–2014 Pollino Seismic Swarm: Complex Fault Systems Imaged by 1D Refined Location and Shear Wave Splitting Analysis at the Apennines–Calabrian Arc Boundary

    In the years between 2011 and 2014, at the edge between the Apennines collapsing chain and the subducting Calabrian arc, intense seismic swarms occurred in the Pollino mountain belt. In this key region, <2.5mm/yr of NE-trending extension is accommodated on an intricate network of normal faults, having almost the same direction as the mountain belt. The long-lasting seismic release consisted of different swarm episodes, where the strongest event coinciding with a ML 5.0 shock occurred in October 2012. This latter comes after a ML four nucleated in May 2012 and followed by aseismic slip episodes. In this study, we present accurate relocations for ∼6,000 earthquakes and shear-wave splitting analysis for ∼22,600 event-station pairs. The seismicity distribution delineates two main clusters around the major shocks: in the north-western area, where the ML 5.0 occurred, the hypocenters are localized in a ball-shaped volume of seismicity without defining any planar distribution, whilst in the eastern area, where the ML 4.3 nucleates, the hypocenters define several faults of a complex system of thrusts and back-thrusts. This different behavior is also imaged by the anisotropic parameters results: a strong variability of fast directions is observed in the western sector, while stable orientations are visible in the eastern cluster. This tectonic system possibly formed as a positive flower structure but as of today, it accommodates stress on normal faults. The deep structure imaged by refined locations is overall consistent with the complex fault system recently mapped at the surface and with patterns of crustal anisotropy depicting fractures alignment at depth. The possible reactivation of inherited structures supports the important role of the Pollino fault as a composite wrench fault system along which, in the lower Pleistocene, the southward retreat of the ionian slab was accommodated; in this contest, the inversion of the faults kinematics indicates a probable southward shift of the slab edge. This interpretation may help to comprehend the physical mechanisms behind the seismic swarms of the region and defining the seismic hazard of the Pollino range: nowadays a region of high seismic hazard although no strong earthquakes are present in the historical record.
      1191  75
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Stress inversions to forecast magma pathways and eruptive vent location

    When a batch of magma reaches Earth's surface, it forms a vent from which volcanic products are erupted. At many volcanoes, successive batches may open vents far away from previous ones, resulting in scattered, sometimes seemingly random spatial distributions. This exposes vast areas to volcanic hazards and makes forecasting difficult. Here, we show that magma pathways and thus future vent locations may be forecast by combining the physics of magma transport with a Monte Carlo inversion scheme for the volcano stress history. We validate our approach on a densely populated active volcanic field, Campi Flegrei (Italy), where we forecast future vents on an onshore semiannular belt located between 2.3 and 4.2 km from the caldera center. Our approach offers a mechanical explanation for the vent migration over time at Campi Flegrei and at many calderas worldwide and may be applicable to volcanoes of any type.
      361  2
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The NEWTON-g Gravity Imager: Toward New Paradigms for Terrain Gravimetry

    Knowledge of the spatio-temporal changes in the characteristics and distribution of subsurface fluids is key to properly addressing important societal issues, including: sustainable management of energy resources (e.g., hydrocarbons and geothermal energy), management of water resources, and assessment of hazard (e.g., volcanic eruptions). Gravimetry is highly attractive because it can detect changes in subsurface mass, thus providing a window into processes that involve deep fluids. However, high cost and operating features associated with current instrumentation seriously limits the practical field use of this geophysical method. The NEWTON-g project proposes a radical change of paradigm for gravimetry through the development of a fieldcompatible measuring system (the gravity imager), able to real-time monitor the evolution of the subsurface mass changes. This system includes an array of lowcosts microelectromechanical systems-based relative gravimeters, anchored on an absolute quantum gravimeter. It will provide imaging of gravity changes, associated with variations in subsurface fluid properties, with unparalleled spatio-temporal resolution. During the final ∼2 years of NEWTON-g, the gravity imager will be field tested in the summit of Mt. Etna volcano (Italy), where frequent gravity fluctuations, easy access to the active structures and the presence of a multiparameter monitoring system (including traditional gravimeters) ensure an excellent natural laboratory for testing the new tools. Insights from the gravity imager will be used to i) improve our knowledge of the causeeffect relationships between volcanic processes and gravity changes observable at the surface and ii) develop strategies to best incorporate the gravity data into hazards assessments and mitigation plans. A successful implementation of NEWTON-g will open new doors for geophysical exploration.
      846  84
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    On the mechanisms governing dike arrest: Insight from the 2000 Miyakejima dike injection

    Magma stored beneath volcanoes is sometimes transported out of the magma chambers by means of laterally propagating dikes, which can lead to fissure eruptions if they intersect the Earth’s surface. The driving force for lateral dike propagation can be a lateral tectonic stress gradient, the stress gradient due to the topographic loads, the overpressure of the magma chamber, or a combination of those forces. The 2000 dike intrusion at Miyakejima volcano, Izu arc, Japan, propagated laterally for about 30 km and stopped in correspondence of a strike-slip system, sub-perpendicular to the dike plane. Then the dike continued to inflate, without further propagation. Abundant seismicity was produced, including five M > 6 earthquakes, one of which occurred on the pre-existing fault system close to the tip of the dike, at approximately the time of arrest. It has been proposed that the main cause for the dike arrest was the fault-induced stress. Here we use a boundary element numerical approach to study the interplay between a propagating dike and a pre-stressed strike-slip fault and check the relative role played by dike–fault interaction and topographic loading in arresting the Miyakejima dike. We calibrate the model parameters according to previous estimates of dike opening and fault displacement based on crustal deformation observations. Bycomputing the energy released during the propagation, our model indicates whether the dike will stop at a given location. We find that the stress gradient induced by the topography is needed for an opening distribution along the dike consistent with the observed seismicity, but it cannot explain its arrest at the prescribed location. On the other hand, the interaction of dike with the fault explains the arrest but not the opening distribution. The joint effect of the topographic load and the stress interaction with strike-slip fault is consistent with the observations, provided the pre-existing fault system is pre-loadedwith a significant stress, released gradually during the dike–fault interplay. Our results reveal how the mechanical interaction between dikes and faults may affect the propagation of magmatic intrusions in general. This has implications for our understanding of the geometrical arrangement of rift segments and transform faults in Mid Ocean Ridges, and for the interplay between dikes and dike-induced graben systems.
      279  1
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    2010-2014 Seismic activity images the activated fault system in the Pollino area, at the Appennines-Calabrian arc boundary region

    The main goal of this study is to increase the understanding of the physical mechanisms behind the ongoing seismic activity in the Pollino area and its influence on the seismic hazard of the Apennines-Calabrian arc boundary region. The study area, near the Pollino massif, is located at the northernmost edge of the Calabrian Arc, which is the last oceanic subduction segment along the Africa-Eurasian plate. The subduction results from the sinking of the Ionian oceanic plate beneath the Calabrian Arc-Southern Tyrrhenian Sea and is part of the fragmented tectonic boundary between two macro-plates: Africa and Eurasia. The subduction geometry is well-documented by several seismological studies (i.e. Chiarabba et al., 2005), and the lithospheric structure of the area is quietly well known (i.e. Totaro et al., 2014 and Piana Agostinetti and Amato, 2009) Despite the slow N-S convergence between these major plates, the Southern Tyrrhenian Sea is a large basin characterized by E-W extensional tectonic. Since Late Miocene, the Calabrian Arc slab experienced rapid rollback, moving E to SE at a rate of 5-6 cm/yr, which is by far higher than the ~1-2 cm/yr rate of convergence between Africa and Europa (Faccenna et al., 2004). However, during late Pleistocene, rollback and subduction have slowed and is likely proceeding at less than 1 cm/yr (D’Agostino and Selvaggi., 2004). Geodetic measurements show that the Pollino Range is subject to NE-SW anti-apenninic extension. In the region the strain rate field shows a continuous belt of extensional deformation that follows the ridge of the Southern Apennines and extends in the Pollino region. The extension rate appears to decrease from the Southern Apennines to the Calabria- Lucania border region (D’Agostino et al., 2013). This finding indeed reveals that the Pollino region is deforming and accumulating tectonic strain which results in a complex system of normal active faults striking sub-parallel to the Apennines. Two principal normal faults are present in the Italian Database of the Individual Seismogenic Sources DISS version 3.1.1 (DISS Working Group, 2010) in the Pollino area: the Pollino (P) fault and the “Rimendiello-Mormanno” (RM) fault system. The RM fault is an active seismogenic structure it strikes about NNW-SSE and dips toward NE; it has hosted in its northernmost part a M 5.0 earthquake on 9th September 1998. The P fault has similar strike but dips toward SW: it shows no recent seismicity and is hence one of the most prominent seismic gaps in the Italian historical seismic catalogue (Rovida et al., 2011). Paleoseismic studies have shown that the P fault was active in the last ten thousand years and is capable to produce events with magnitude above 6.0. The DISS database reports as debated source also the Piana Perretti fault (Brozzetti et al., 2009). A detailed structural map of the area interested by the seismic sequence shows three fault systems (Brozzetti et al., 2013) consisting of several aligned fault segments that have been active during the Late Pleistocene and are reasonably presently active. The first fault system strikes NW-SE and dips toward SW (including the Piana Perretti fault at the NE edge of the Mercure Basin), the second one has similar strike and NE dip, while the third one strikes about E-W. Earthquakes reported in the historical catalogues for this area are not very strong. Few earthquakes with magnitude probably less than 6 affected the area, including the Mw=5.6 “Mercure” event in 1998 (Brozzetti et al., 2009). The Parametric Catalogue of Italian earthquakes (CPTI11, Rovida et al., 2011), shows very well the lack of strong earthquakes in the region: there is a clear evidence of large earthquakes in the Campania-Basilicata area (M~7.0) and several strong earthquakes in the Sila region and in the whole Calabrian territory. According to the seismic classification of the national territory, the area affected by the 2010-2014 seismic activity have a relatively higher probability to be shaken by a strong acceleration (Gruppo di Lavoro MPS, 2004). Most of the seismic events occurred in areas where the peak ground acceleration having 10% chance of being exceeded in next 50 years is between the values of 0.225 g and 0.275 g.
      478  349
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    A probabilistic approach for the classification of earthquakes as ‘triggered’ or ‘not triggered’

    The occurrence time of earthquakes can be anticipated or delayed by external phenomena that induce strain energy changes on the faults. ‘Anticipated’ earthquakes are generally called ‘triggered’; however, it can be controversial to label a specific earthquake as such, mostly because of the stochastic nature of earthquake occurrence and of the large uncertainties usually associated to stress modelling. Here we introduce a combined statistical and physical approach to quantify the probability that a given earthquake was triggered by a given stress-inducing phenomenon. As an example, we consider an earthquake that was likely triggered by a natural event: the M = 6.2 13 Jan 1976 Kópasker earthquake on the Grímsey lineament (Tjörnes Fracture Zone, Iceland), which occurred about 3 weeks after a large dike injection in the nearby Krafla fissure swarm. By using Coulomb stress calculations and the rate-and-state earthquake nucleation theory, we calculate the likelihood of the earthquake in a scenario that contains only the tectonic background and excludes the dike and in a scenario that includes the dike but excludes the background. Applying the Bayes’ theorem, we obtain that the probability that the earthquake was indeed triggered by the dike, rather than purely due to the accumulation of tectonic strain, is about 60 to 90 %. This methodology allows us to assign quantitative probabilities to different scenarios and can help in classifying earthquakes as triggered or not triggered by natural or human-induced changes of stress in the crust.
      204  1
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Bayesian Hierarchical Time Predictable Model for eruption occurrence: an application to Kilauea Volcano

    (2010-06) ; ; ; ;
    Passarelli, L.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Bologna, Bologna, Italia
    The physical processes responsible for volcanic eruptions are characterized by a large number of degrees of freedom, often non-linearly coupled. This extreme complexity leads to an intrinsic deterministic unpredictability of such events that can be satisfactorily described by a stochastic process. Here, we address the long-term eruption forecasting of open conduit volcanoes through a Bayesian Hierarchical Modelling information in the catalogue of past eruptions, such as the time of occurrence, the duration, and the erupted volumes. The aim of the model is twofold: (1) to get new insight about the physics of the process, using the model to test some basic physical hypotheses of the eruptive process and (2) to build a stochastic model for long-term eruption forecasting; this is the basic component of Probabilistic Volcanic Hazard Assessment that is used for rational land use planning and to design Emergency plan. We apply the model to Kilauea eruption occurrences and check its feasibility to be included in Probabilistic Volcanic Hazard Assessment.
      168  28
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Editorial: Seismicity in Volcanic Areas

    Seismic activity (e.g., earthquakes, tremors) beneath volcanic areas is primarily caused by the dynamic interaction of molten rock and hydrothermal fluids with the solid host rock, by fracturing and fragmentation of the magma itself, and by tectonic processes interacting with the volcano. In addition, near-surface phenomena such as explosions and rockfalls at a volcanic edifice also produce seismic events. At volcano observatories globally, the real-time monitoring of the spatial and temporal patterns of seismic events is an essential geophysical tool to quantify the state of unrest, and forecast eruptions successfully. Seismic waveforms, earthquake catalogues and earthquake ray-path properties commonly supplement this tool to model the complex processes responsible for the earthquakes quantitatively, and to image subsurface magmatic and tectonic structures. Independent constraints provided by other disciplines such as geodesy and structural geology also significantly help scientists to understand the volcanic processes. Recent advances in earthquake recording technology, computing power and algorithms in artificial intelligence, allow processing and interpretation of large and complex multi-parametric datasets and scenarios.
      175  55