Tarabusi, Gabriele
Preferred name
Tarabusi, Gabriele
Email
gabriele.tarabusi@ingv.it
Staff
staff
ORCID
Scopus Author ID
35410757900
Researcher ID
A-2396-2016
56 results
Filters
Settings
The search returned 56 results
Now showing 1 - 10 of 56
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Site effect studies following the 2016 Mw 6.0 Amatrice Earthquake (Italy): the Emersito Task Force activities
On August 24, 2016, at 01:36 UTC a MW 6.0 earthquake struck an extensive area of the Central Apennines (Italy) be-tween the towns of Norcia and Amatrice. Due to the mainshock magnitude and the widespread damaging level of build-ings in the epicentral area, the Emersito task force has been mobilized by the Istituto Nazionale di Geofisica e Vulcanologia (INGV). The aim of Emersito is to carry out and coordinate the monitoring of local site effects, caused by geological and geomorphological settings. During the first days of the seismic emergency, Emersito installed a tempo-rary seismic network for site effect studies at 4 municipalities close to the epicentral area (Amandola, Civitella del Tronto, Montereale and Capitignano), using 22 stations equipped with both velocimetric and accelerometric sensors. The selection of the sites where stations have been installed was mainly driven by the proximity to the epicentral area (without interfere with the rescue operations) and by peculiar geologic and geomorphologic settings (topographic irregu-larities, fault zones, alluvial plains). Preliminary analyses performed on ambient noise and aftershocks signals show that directional amplification effects may have occurred at stations installed on the top of topographic irregularities. We also observed the lengthening and amplification of the seismograms and a variability of the peaked frequency across the sedi-mentary basin between Montereale and Capitignano, probably related to a different thickness of the deposits. Further analyses are necessary to assess the correlation with surface geology.2018 226 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Surface ruptures following the 30 October 2016 Mw 6.5 Norcia earthquake, central Italy
We present a 1:25,000 scale map of the coseismic surface ruptures following the 30 October 2016 M-w 6.5 Norcia normal-faulting earthquake, central Italy. Detailed rupture mapping is based on almost 11,000 oblique photographs taken from helicopter flights, that has been verified and integrated with field data (>7000 measurements). Thanks to the common efforts of the Open EMERGEO Working Group (130 people, 25 research institutions and universities from Europe), we were able to document a complex surface faulting pattern with a dominant strike of N135 degrees-160 degrees (SW-dipping) and a subordinate strike of N320 degrees-345 degrees (NE-dipping) along about 28km of the active Mt. Vettore-Mt. Bove fault system. Geometric and kinematic characteristics of the rupture were observed and recorded along closely spaced, parallel or subparallel, overlapping or step-like synthetic and antithetic fault splays of the activated fault systems, comprising a total surface rupture length of approximately 46km when all ruptures were considered.6034 218 - Some of the metrics are blocked by yourconsent settings
Item type:Product, Access status: Open Access , 244 1487 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The use of HVSR measurements for investigating buried tectonic structures: the Mirandola anticline, Northern Italy, as a case study
(2017-04); ; ;Tarabusi, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia ;Caputo, R.The Mirandola Anticline represents a buried fault-propagation fold which has been growing during Quaternary due to the seismogenic activity of a blind segment belonging to the broader Ferrara Arc. The last reactivation occurred during the May 2012 Emilia sequence. In correspondence with this structure the thickness of the marine and continental deposits of the Po Plain foredeep is particularly reduced. In order to better define the shallow geometry of this tectonic structure, and hence its recent activity, we investigated in a depth range which is intermediate between the surficial morphological observations and seismic profiles information. In particular, we carried out numerous passive seismic measurements (single station microtremor) for obtaining the horizontal to vertical spectral ratio (HVSR). The results of a combined analysis of the peak frequency and its amplitude nicely fit the available geological information suggesting that this low-cost geophysical technique could be successfully applied in other sectors of wide morphologically flat alluvial plains to investigate blind and completely buried potential seismogenic structures336 32 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Down-hole geophysical characterization of middle-upper Quaternary sequences in the Apennine Foredeep, Mirabello, Italy
The 2012 earthquakes sequence stroke a wide area of the alluvial plain in the Emilia-Romagna Region and triggered a new research interest on the role of the subsurface stratigraphic architecture and petrophysical property distribution in the modulation of the local seismic effects. Few direct shear wave velocity V_S data were however available below the depth of 50m. The only available V_S measurements were obtained from an anticline area, characterized by a reduced stratigraphic thickness and peculiar sedimentary facies, hardly representative of the majority of the alluvial plain subsurface. The study provides the first V_S profile available from middle-upper Quaternary successions deposited into a fast subsiding syncline area of the Apennine Foredeep Basin. The P-wave velocity V_P and the S-wave velocity V_S logs fill in the previous data gap on the geophysical parameters needed for the estimation of the local seismic response. Both V_P and V_S logs were continuously acquired to the depth of 265 m. The log records a velocity increase with depth, punctuated by sharp increases at some stratigraphic discordance surfaces. The value of 800 m/s that characterizes the “seismic bedrock”, as defined by the Italian building code [NTC 2008] was never reached at any depth. The investigated succession records a depositional evolution from deltaic-marine to alluvial plain conditions, punctuated by six glacio-eustatic depositional cycles, developed in Middle-Upper Quaternary times. The stratigraphic units described in the syncline log were correlated at a regional scale, with the thinner anticline succession of Mirandola. Correlatable units deposited into syncline and anticline areas reveal similar shear wave velocity values, supporting the regional extrapolation of the measured values.492 397 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Earthquake Rupture Forecasts for the MPS19 Seismic Hazard Model of Italy
In recent years, new approaches for developing earthquake rupture forecasts (ERFs) have been proposed to be used as an input for probabilistic seismic hazard assessment (PSHA). Zone- based approaches with seismicity rates derived from earthquake catalogs are commonly used in many countries as the standard for national seismic hazard models. In Italy, a single zone- based ERF is currently the basis for the official seismic hazard model. In this contribution, we present eleven new ERFs, including five zone-based, two smoothed seismicity-based, two fault- based, and two geodetic-based, used for a new PSH model in Italy. The ERFs were tested against observed seismicity and were subject to an elicitation procedure by a panel of PSHA experts to verify the scientific robustness and consistency of the forecasts with respect to the observations. Tests and elicitation were finalized to weight the ERFs. The results show a good response to the new inputs to observed seismicity in the last few centuries. The entire approach was a first attempt to build a community-based set of ERFs for an Italian PSHA model. The project involved a large number of seismic hazard practitioners, with their knowledge and experience, and the development of different models to capture and explore a large range of epistemic uncertainties in building ERFs, and represents an important step forward for the new national seismic hazard model.3092 170 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Buried Alive: Imaging the 9 November 2022, Mw 5.5 Earthquake Source on the Offshore Adriatic Blind Thrust Front of the Northern Apennines (Italy)
The prompt identification of faults responsible for moderate-to-large earthquakes is fundamental for understanding the likelihood of further, potentially damaging events. This is increasingly challenging when the activated fault is an offshore buried thrust, where neither coseismic surface ruptures nor GPS/InSAR deformation data are available after an earthquake. We show that on 9 November 2022, an Mw 5.5 earthquake offshore Pesaro ruptured a portion of the buried Northern Apennines thrust front (the Cornelia thrust system [CTS]). By post-processing and interpreting the seismic reflection profiles crossing this thrust system, we determined that the activated fault (CTS) is an arcuate 30-km-long, NW-SE striking, SW dipping thrust and that older structures at its footwall possibly influenced its position and geometry. The activation of adjacent segments of the thrust system is a plausible scenario that deserves to be further investigated to understand the full earthquake potential of this offshore seismogenic source.635 273 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Earthquake Induced Landslides (EILs) occurrence and earthquake parameters: new empirical relationships developed using the updated CFTI historical dataset
The ground shaking generated by the arrival of seismic waves released during earthquakes, besides generating damages to the urban environment and artificial infrastructures, can trigger widespread environmental coseismic effects, overall defined as secondary Earthquake Environmental Effects (EEE) in the Environmental Seismic Intensity scale (ESI; Michetti et al., 2007). These natural effects include river ponding or diversion, liquefaction, ground compaction and failures and, among all, landslides. If, due to geological and geomorphological reasons, the area hit by the earthquake is susceptible to their occurrence, they take place almost constantly, regardless of the kinematic characteristics of the seismogenic sources, and affect areas of variable size according to the earthquake magnitude. Besides potentially increasing overall earthquake damage immediately after the mainshock, they pose long lasting secondary hazards to earthquake affected areas (e.g. Fan et al., 2019), driving also the long-term morphological evolution of the territory (e.g. Wang et al., 2020). Earthquake Induced Landslides (EILs) are among the most diffused environmental hazard connected to the earthquake activity, and especially affect recent, high relief mountain landscapes associated to the ongoing tectonic plate dynamics. There exist in fact reciprocal feedbacks between active tectonics, which in the long-term creates the predisposing morphological and geological factors, and landslide activity, which works for lowering the topographic gradients. Italy sits on the plate boundary separating the slowly converging Eurasia and Nubia plates, which in the long run created its mostly mountain territory, and is characterized by a relatively high seismic hazard. The combination of the relatively frequent seismic release and the locally high landslide susceptibility (Fig. 1), makes the Italian territory especially prone to EILs occurrence. This is testified by the numerous coseismic landslide inventories compiled after recent earthquakes (e.g. Guzzetti et al., 2009). As a first step of our workflow, we revised the database of seismic induced environmental effects connected to the CFTI5Med historical seismic catalogue (available at https://storing.ingv.it/cfti/cfti5/; Guidoboni et al., 2018; 2019). To achieve this goal, we collected new data points from new historical sources, revised the EILs already included in CFTI, and finally, in a dedicated GIS environment, we tried to locate them on topographic maps using the coeval descriptions. In some cases, it was possible to associate the historical EILs to landslides included and described in the Italian Landslide Inventory (IFFI database; Trigila et al., 2007). Following this, landslides were subdivided into three classes according to their positioning precision, i.e.: Class A if they were geographically well located using a toponymal (AI if associated to one of landslides included in IFFI); Class B, if they were generally located in an area (BI if associated to one of landslides included in IFFI); Class C, if not localized. The revised CFTI database includes more than 1000 historical EILs, associated to 159 individual earthquakes or seismic sequences occurred between 117 B.C.E. and 1997 (Fig. 2). With respect to the datasets used so far for deriving empirical relationships (e.g. Livio and Ferrario, 2019; Tanyaş et al., 2017), these figures dramatically increase the number of available data points for the Italian territory. As a second step, the implemented database was used to develop new empirical attenuation relationships between the EILs density and the distance from the epicenter as a function of the earthquake magnitude. Then, we subdivided seismic events into three magnitude classes to account for the different extent of the maximum area affected by EILs and released energy. The three classes are as follows: Class 1, M < 5.5; Class 2, 5.5 ≤ M < 6.5, and Class 3, M ≥ 6.5. Based on the locations of EILs and of epicenters, we set circular search areas with a 5 km large moving window and calculated for each area the cumulative density. We found that the cumulative density decreases with the distance following a power law relationship, with coefficients of determination variable between 0.95 and 0.99 according to the magnitude class, and that the maximum distance including 95th percentile of landslides increases with increasing magnitude range. In particular, the 95th percentile distance, i.e. the distance within which 95% of EILs are expected to occur, is 42 km for earthquakes of Class 1, 66 km for those of Class 2, and 77 km for those of Class 3. In addition, using the shakemaps of 38 out of 159 historical earthquakes of our dataset, we developed an empirical relationship between EILs density and PGA values. The shakemaps of historical earthquakes were recently published by the Istituto Nazionale di Geofisica e Vulcanologia and are available at http://shakemap.ingv.it/shake4/. EILs density was computed by classifying PGA values into classes of 0.1 g range. We used the EILs location to sample the PGA value and derive a power law relationship showing an increasing landslide density with increasing acceleration. As a final step, these empirical relationships were used to relate each landslide belonging to the Italian national inventory (IFFI) to individual segments of known seismogenic sources located in the Italian territory or in nearby countries within a maximum distance corresponding to the 95th percentile distance calculated from the expected magnitude of the seismogenic source (Fig. 2). We used the composite seismogenic sources of the DISS database version 3.3.0 (DISS Working Group, 2021) hypothesizing that they may trigger the EILs activation during future earthquakes and, using a floating hypocenter approach, i.e. shifting the hypocenters along the seismogenic sources with 4 km fixed steps, built preliminary EILs scenarios for each potential hypocenter location.15 122 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Esperienza di misura mediante lo strumento tromino per lo studio delle vibrazioni e delle sollecitazioni naturali e antropiche
(2011-09-19); ; ; ; Il rumore sismico ambientale è l’insieme delle piccole vibrazioni sismiche presenti ovunque sulla superficie terrestre e generate da sorgenti naturali o antropiche. Tra gli esempi più significativi, si può pensare agli effetti delle perturbazioni atmosferiche sulle onde oceaniche ed alla loro propagazione sul continente come onde di superficie, al traffico veicolare e alle attività industriali, che producono onde superficiali di Rayleigh, e, in generale, all’attività dinamica terrestre. Le onde sismiche che ne derivano sono tipicamente a bassa energia, con ampiezze dell’ordine di 10-4/10-2 mm [Okada, 2003]. Inoltre, in base al contenuto in frequenza inferiore o superiore a 0.5 Hz, si parla rispettivamente di microsismica (primariamente di origine naturale) o microtremore (di origine generalmente antropica). Il rumore sismico ambientale è una sorgente di eccitazione per la risonanza del sottosuolo e degli edifici, da cui la possibilità di estrarre da esso, mediante opportune tecniche di analisi, informazioni interessanti sui sistemi risonanti studiati. Il rumore sismico può usarsi per lo studio della stratigrafia del terreno, sulla base dell’analisi degli spettri di potenza dei segnali e dei rapporti spettrali [Kanai e Tanaka, 1954; Lermo, 1993; Yamanaka et al., 1993]. In particolare, il metodo dei rapporti spettrali H/V è particolarmente interessante perché consente di ottenere informazioni affidabili utilizzando strumentazione di basso costo e facile impiego. Esso è basato sul calcolo del rapporto degli spettri di Fourier del rumore nel piano orizzontale H (generalmente lo spettro H viene calcolato come media degli spettri di Fourier delle componenti orizzontali NS ed EW) e della componente verticale V [Nakamura, 1989]. Il significato teorico del rapporto spettrale H/V è abbastanza immediato nel caso in cui si consideri un mezzo semplice formato da due soli strati: il bedrock, cioè lo strato duro e profondo, ed uno strato superficiale più soffice. Si immagini che l’onda di superficie che viaggia nello strato superficiale sia riflessa all’interfaccia tra gli strati e interferisca costruttivamente con le onde incidenti, sommandosi e raggiungendo ampiezze massime per l’effetto di risonanza. Ciò accade quando la lunghezza dell’onda incidente !m è tale che = 4H /(2m !1) m " , con m =1, 2,L, dove il fattore 4 /(2m!1) ) deriva dal fatto che, all’interfaccia tra un mezzo soffice ed uno duro, avviene inversione di fase. Le corrispondenti frequenze di risonanza sono pertanto date da (2 1) 4 = m ! H V f s m , (1) dove s V è la velocità di propagazione delle onde di superficie nel mezzo considerato. Poiché il modo fondamentale m = 1 è nettamente dominante rispetto a quelli superiori, si ha semplicemente H V f s r 4 = , (2) frequenza di risonanza che può individuarsi quale picco del rapporto H/V. Le frequenze proprie del sottosuolo possono essere quindi eccitate dal rumore di fondo e diventare visibili nello spettro del rumore sismico misurato in superficie. Il rumore sismico ambientale può anche essere utilizzato per identificare le frequenze proprie di vibrazione di un edificio. Un tale tipo di applicazione è profondamente diverso da quella che impiega i rapporti H/V, e i metodi di processamento dell’informazione sono piuttosto diversi, ma la strumentazione da utilizzare è esattamente la stessa perché in entrambi i casi l’obiettivo è estrarre informazione significativa da debole rumore sismico. In particolare, è attualmente disponibile uno strumento particolarmente compatto, economico e di semplice utilizzo come il tomografo digitale Tromino [Castellaro et al. 2005], grazie al quale questi metodi di sismica passiva hanno iniziato ad avere larga diffusione nella valutazione degli effetti di sito [Mulargia et al. 2007]. Nel caso in cui la frequenza di risonanza del sottosuolo coincida con quella di un edificio presente, in caso di terremoto può aversi un fenomeno di accoppiamento fra le due modalità di vibrazione. Questo effetto di amplificazione sismica produrrà un grande aumento della sollecitazione sugli edifici. Per questo motivo, l’amplificazione sismica è oggi considerata la prima causa dei danni indotti dal 6 terremoto e per questo motivo una attenta analisi delle frequenze caratteristiche dei siti viene effettuata nella fase di progettazione degli edifici. Va inoltre considerato che la stima delle frequenze di risonanza degli edifici può essere monitorata nel tempo, nella ben fondata ipotesi che un cambiamento sensibile dei modi principali della struttura sia legata al danneggiamento o all’alterazione della struttura stessa. In generale, un danneggiamento si traduce infatti in una diminuzione sia della frequenza di risonanza per ciascun modo, sia nella diminuzione del rapporto di smorzamento, tanto che l’analisi modale sperimentale (experimental modal analysis, o EMA) è correntemente utilizzata nella valutazione con tecniche non distruttive dello stato di salute di una struttura. In questo lavoro viene descritta una esperienza effettuata dall’INGV (Sezione di Bologna) di osservazione e di analisi dei dati rilevati mediante Tromino in un edificio situato in una zona altamente trafficata da mezzi e veicoli pesanti. Gli obiettivi di questa prima esperienza sono: (i) misurare le vibrazioni a cui gli edifici sono soggetti per effetto del traffico stradale, in modo da verificare se le normative vigenti in merito sono rispettate oppure no; (ii) fornire una prima stima delle frequenze di risonanza dell’edificio, da verificare in futuro in ulteriori sessioni di misura, operando in modo da rendere possibile un’analisi modale sperimentale completa a partire dai dati acquisiti ora.994 2675 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Gruppo Operativo EMERSITO - Evento sismico Costa Marchigiana 2022 - Rapporto N. 1 del 09/11/2022
(2022-11-09); ; ; ; Il giorno 9 Novembre 2022, alle 06:07:24 UTC (07:07:24 ora locale) un terremoto di magnitudo momento (MW) pari a 5.5 ha interessato la Costa Marchigiana Pesarese (Pesaro Urbino). A causa della magnitudo del mainshock e del livello di danneggiamento riscontrato, l’INGV ha attivato il gruppo operativo EMERSITO (http://emersitoweb.rm.ingv.it/index.php/it/), il cui obiettivo è di svolgere e coordinare le campagne di monitoraggio per studi di effetti di sito e di microzonazione sismica. Durante le prime fasi di un’emergenza sismica, l’attività principale del gruppo operativo EMERSITO consiste, attraverso la costituzione di gruppi di lavoro, nel reperimento delle informazioni geologiche e geofisiche, nell’analisi dei dati sismici esistenti, nella pianificazione di misure sismologiche e geofisiche ed in attività propedeutiche alla microzonazione sismica. Nel caso specifico della sequenza sismica della Costa Marchigiana Pesarese: - sono state reperite informazioni di letteratura sugli effetti di sito già osservati nella zona colpita, sulla cartografia geologica e sulla microzonazione sismica disponibile; - sono state reperite le informazioni di caratterizzazione dei siti delle stazioni sismiche permanenti presenti nell’area (http://itaca.mi.ingv.it/ItacaNet_31 e http://crisp.ingv.it) e sono stati rianalizzati alcuni dati disponibili (http://eida.ingv.it/). - è stata pianificata l’installazione di una rete sismica temporanea nella zona colpita dal terremoto, nei comuni di Ancona e Senigallia. La scelta delle aree è stata guidata principalmente dalla prossimità con l’area epicentrale, dalla disponibilità di studi di microzonazione sismica e di carte geologiche a differenti scale di rappresentazione, dalla distribuzione dei parametri di scuotimento del suolo e della sismicità in tempo reale.300 219
