Skip to main content
The search returned 93 results
Now showing 1 - 10 of 93
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Physics‐Based Broadband Ground‐Motion Simulations for ProbableMw≥7.0 Earthquakes in the Marmara Sea Region (Turkey)

    The city of Istanbul is characterized by one of the highest levels of seismic risk in the Mediterranean region. An important source of such increased risk is the high probability of large earthquake occurrence during the coming years, which stands at about 65% likelihood owing to the existing seismic gap and the post-1999 earthquake stress transfer at the western portion of the North Anatolian fault zone. In this study, we simulated hybrid broadband time histories from selected earthquakes having magnitude Mw >7:0 in the Sea of Marmara within 10–20 km of Istanbul, the most probable scenarios for simulated generation of the devastating 1509 event in this region. Physics-based rupture scenarios, which may be an indication of potential future events, are adopted to estimate the ground-motion characteristics and its variability in the region. Two simulation techniques are used to compute a realistic time series, considering generic rock site conditions. The first is a full 3D wave propagation method used for generating low-frequency seismograms, and the second is a stochastic finite-fault model approach based on dynamic corner-frequency high-frequency seismograms. Dynamic rupture is generated and computed using a boundary integral equation method, and the propagation in the medium is realized through a finite-difference approach. The results from the two simulation techniques are then merged by performing a weighted summation at intermediate frequencies to calculate a broadband synthetic time series. The simulated hybrid broadband ground motions are validated by comparing peak ground acceleration, peak ground velocity (PGV), and spectral accelerations (5% damping) at different periods with the ground-motion prediction equations in the region. Our simulations reveal strong rupture directivity and supershear rupture effects over a large spatial extent, which generate extremely high near-fault motions exceeding the 250 cm=s PGV along the entire length of the ruptured fault.
      946  9
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Prediction of High-Frequency Ground Motion Parameters Based on Weak Motion Data

    (InTechOpen, 2012) ; ; ; ;
    D'Amico, S.; MALTA
    Large earthquakes that have occurred in recent years in densely populated areas of the world (e.g. Izmit, Turkey, 17 August 1999; Duzce, Turkey, 12 November 1999; Chi-Chi, Taiwan 20 September 1999, Bhuj, India, 26 January 2001; Sumatra 26 December 2004; Wenchuan, China, May 12, 2008; L’Aquila, Italy, April 6, 2009; Haiti, January 2010 Turkey 2011) have dramatically highlighted the inadequacy of a massive portion of the buildings erected in and around the epicentral areas. For example, the Izmit event was particularly destructive because a large number of buildings were unable to withstand even moderate levels of ground shaking, demonstrating poor construction criteria and, more generally, the inadequacy of the application of building codes for the region. During the L’Aquila earthquake (April, 06, 2009; Mw=6.3) about 300 persons were killed and over 65,000 were left homeless (Akinci and Malagnini, 2009). It was the deadliest Italian earthquake since the 1980, Irpinia earthquake, and initial estimates place the total economic loss at over several billion Euros. Many studies have already been carried out describing the rupture process and the characteristics of local site effects for this earthquake (e.g. D’Amico et al., 2010a; Akinci et al., 2010). It has been observed that many houses were unable to withstand the ground shaking. Building earthquake-resistant structures and retrofitting old buildings on a national scale may be extremely costly and may represent an economic challenge even for developed western countries, but it is still a very important issue (Rapolla et al., 2008). Planning and design should be based on available national hazard maps, which, in turn, must be produced after a careful calibration of ground motion predictive relationships (Kramer, 1996) for the region. Consequently, the assessment of seismic hazard is probably the most important contribution of seismology to society. The prediction of the earthquake ground motion has always been of primary interest for seismologists and structural engineers. For engineering purposes it is necessary to describe the ground motion according to certain number of ground motion parameters such as: amplitude, frequency content and duration of the motion. However it is necessary to use more than one of these parameters to adequately characterize a particular ground motion. Updating existing hazard maps represents one of the highest priorities for seismologists, who contribute by recomputing the ground motion and reducing the related uncertainties. The quantitative estimate of the ground motion is usually obtained through the use of the so-called predictive relationships (Kramer, 1996), which allow the computation of specific ground-motion parameter as a function of magnitude, distance from the source, and frequency and they should be calibrated in the region of interest. However this is only possible if seismic records of large earthquakes are available for the specific region in order to derive a valid attenuation relationship regressing a large number of strong-motion data (e.g. Campbell and Bozorgnia, 1994; Boore et al., 1993; Ambraseys et al., 1996, Ambraseys and Simpson, 1996; Sabetta and Pugliese, 1987, 1996; Akkar and Bommer 2010). For the Italian region the most used attenuation relationships are those obtained by Sabetta and Pugliese (1987, 1996) regressing a few data recorded for earthquakes in different tectonic and geological environments. It has been shown in several cases that it is often not adequate to reproduce the ground motion in each region of the country using a single model. Furthermore the different crustal properties from region to region play a key role in this kind of studies. However, the attenuation properties of the crust can be evaluated using the background seismicity as suggested by Chouet et al. (1978) and later demonstrated by Raoff et al. (1999) and Malagnini et al (2000a, 2007). In other words, it becomes possible to develop regionallycalibrated attenuation relationships even where strong-motion data are not available. One of the purposes of this work is to describe quantitatively the regional attenuation and source characteristics for constraining the amplitude of strong motion expected from future earthquakes in the area. In this work we describe how to use the background seismicity to perform the analysis (details in Malagnini et. 2000a, 2007). In particular, this chapter describes the procedures and techniques to study the ground motion and will focus on describing both strong motion attenuation relationships and the techniques used to derive the ground motion parameters even when strong ground motion data are not available. We will present the results obtained for different regions of the Italian peninsula, showing that the attenuation property of the crust and of the source can significantly influence the ground motion. In addition, we will show that stochastic finite-fault modeling based on a dynamic frequency approach, coupled with field investigations, confirms to be a reliable and practical method to simulate ground motion records of moderate and large earthquakes especially in regions prone to widespread structural damage.
      174  309
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Strong-Ground-Motion Simulation of the 6 April 2009 L’Aquila, Italy, Earthquake

    (2012) ; ; ; ;
    Ugurhan, B.; METU, ANKARA, TURKEY
    On 6 April 2009, an earthquake of Mw 6:13 (Herrmann et al., 2011) occurred in central Italy, close to the town of L’Aquila. Although the earthquake is considered to be a moderate-size event, it caused extensive damage to the surrounding area. The earthquake is identified with significant directivity effects: highamplitude, short-duration motions are observed at the stations that are oriented along the rupture direction, whereas low-amplitude, long-duration motions are observed at the stations oriented in the direction opposite to the rupture. The complex nature of the earthquake combined with its damage potential brings the need for studies that assess the seismological characteristics of the 2009 L’Aquila mainshock. In this study, we present the strong-ground-motion simulation of this particular earthquake using a stochastic finite-fault model with a dynamic corner frequency approach. For modeling the resulting ground motions, we choose two finite-fault source models that take into account the source complexity of the L’Aquila mainshock. In order to test the sensitivity of ground-motion parameters to the seismic wave attenuation parameters, we use two different attenuation models obtained in the study region using weak-motion and strong-motion databases. Comparisons are made between the attenuation of synthetics and ground-motion prediction equations (GMPEs). Synthetic ground motions are further compared with the observed ones in terms of Fourier amplitude and response spectra at 21 strong-ground-motion stations that recorded the mainshock within an epicentral distance of 100 km. The spatial distribution of shaking intensity obtained from the “Did You Feel It?” project and site survey results are compared with the spatial distributions of simulated peak ground-motion intensity parameters. Our results show that despite the limitations of the method in simulating the directivity effects, the stochastic finite-fault model seems an effective and fast tool to simulate the high-frequency portion of ground motion.
      293  22
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Characteristics of the Ground Motion in Northeastern Italy

    A large data set of ground-velocity time histories from earthquakes that occurred in Friuli-Venezia Giulia (northeastern Italy) was used to define regional predictive relationships for ground motion, in the 0.25- to 14.0-Hz frequency band. The bulk of the data set was provided by the seismic network run by Centro Ricerche Sismologiche (CRS), a department of the Istituto Nazionale di Oceanografia e Geofisica (OGS). A collection of 17,238 selected recordings from 1753 earthquakes was compiled for the years 1995–1998, with magnitudes ranging from Mw !1 to 5.6. Ninety-six three-component strong-motion waveforms belonging to the largest events of the 1976–1977 Friuli seismic sequence were also taken from the ENEAENEL accelerogram database and included in our data set. For the strongest event, which occurred on 6 May 1976 at 20:00 local time, an average local magnitude ML 6.6 was computed by Bonamassa and Rovelli (1986). The inclusion of a large number of acceleration time histories from this earthquake and six others, from magnitudes from Mw 5.2 to magnitude Ms 6.1 (three of them of Ms !6.0), extends the validity of the predictive relationships proposed in this study up to the highest magnitude ever recorded in the region. A total of 10,256 vertical-component and 6982 horizontal-component seismograms were simultaneously regressed for excitation and site characteristics, as well as for the crustal propagation, in the hypocentral distance range 20–200 km. Results are given in terms of excitation, attenuation, and specific site for the vertical ground motion, together with a horizontal-to-vertical ratio for each existing horizontalcomponent seismometer. The regional propagation was modeled in the 0.5- to 14.0- Hz frequency band by using a frequency-dependent piece wise continuous linear (in a log–log space) geometrical spreading function and a frequency-dependent attenuation parameter: Q( f ) ! 260( f /1.0)0.55 The excitation spectra of larger events were modeled by using the regional propagation, a single-corner frequency Brune spectral model characterized by an effective stress parameter, Dr ! 60 MPa, and by a regional estimate of the near-surface, distance-independent, networkaveraged attenuation parameter j0 ! 0.045 sec that was estimated from the rolloff of the empirical source spectra obtained from the regressions. Other studies (De Natale et al., 1987; Cocco and Rovelli, 1989; Singh et al., 2001) suggested large stress drops (Dr ! 30–100 MPa,) to explain the highfrequency amplitude levels of the seismic radiation of the largest quakes of the 1976 sequence. Predictions for peak ground acceleration (PGA) and pseudo–spectral velocity (PSV) (5% damping) were computed through the use of the random vibration theory (RVT), with the parameters obtained from the regressions of this study.
      290  42
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Assessing the nature of stochastic uncertainties for ground motion predictions: the Apennines, Italy.

    In this study we aim to assessing the nature of stochastic uncertainties in ground-motion predictions, by including the variability of region-specific crustal attenuation in time and space in the Central/Northern Apennines (Italy), using the events occurred during 2016-2017 earthquake sequence. Spectral characteristics of excitation, attenuation and duration of ground motion are derived through a regression analysis of the peak ground velocities in the frequency range of 0.25–22 Hz. Regressions are carried out over thousands time windows before and after the Amatrice (M6.0), Visso (M5.9) and Norcia (M6.3) earthquakes, in order to evaluate the fluctuations in seismic wave attenuation induced by the largest mainshocks of the seismic sequence. Propagation terms are modeled using random vibration theory, through a grid search over the attenuation parameters. Here we show that crustal attenuation is strongly affected by transients triggered by the main events, and quantify the impact of the seismic wave attenuation variability on the ground-motion hazard in the Central/Northern Apennines. We also determine the effect of spatial variability of crustal attenuation and its contribution to stochastic uncertainties in ground motion predictions.
      55  93
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A site-specific earthquake ground response analysis using a fault-based approach and nonlinear modeling: the Case Pente site (Sulmona, Italy)

    In this paper we present the ground response analyses (GRA) of a site where an industrial facility is planned. Because of its location on an active normal fault system known as a relevant seismic gap, the Mt. Morrone Fault system (MMF), and at the edge of a basin filled with slow velocity continental deposits, a inter-disciplinary and non-standard approach has been applied to assess the seismic input of the dynamic numerical analyses. It includes geological, seismological, geotechnical and engineering contributions. Two fault scenarios, MMF1 and MMF2, were considered and scenario-based (SSHA) and probabilistic (time-dependent, TD, and time-independent, TI) seismic hazard (PSHA) analyses were implemented. Comparison among the spectra corresponding to the 90th percentile of the SSHA statistical distribution and the PSHA average ones, shows that the MMF2 has values similar to the TD model. The SSHA 90th percentile distribution was selected as target spectra to retrieve the seismic input for GRA. Nonlinear numerical simulations of seismic wave propagation were implemented to derive surface ground motion parameters. GRA acceleration response spectra and their PGA are notably higher, and thus on the safety site, than those obtained following the Italian code approach for seismic resistant buildings. These results confirm that a scenario-based methodology can better capture the shaking effect in near-field conditions, avoiding possibly unconservative underestimations of the seismic actions and in view of a more robust performance-based approach used by engineers for either new design and/or assessment/retrofit purposes of the built environment.
      616  138
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Ground-Motion Scaling in the Kachchh Basin, India, Deduced from

    (2004) ; ; ;
    Malagnini, L.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    ;
    Bodin, P.; Center for Earthquake Research and Information University of Memphis
    We studied the excitation, propagation, and site effects in the Kachchh basin of India by using ground-motion recordings from a temporary seismograph network deployed to study aftershocks of the Mw 7.6 Bhuj earthquake of 26 January 2001. The Kachchh basin has been proposed as a useful analog region for studying hazard in other earthquake-prone but slowly deforming regions, such as the central United States. The earthquakes we studied ranged in size from about M 2 to M 5.2, and travel paths ranged from a few kilometers to about a hundred kilometers. There was a broad range of focal depths among the aftershocks, so the data were divided into two overlapping subsets to test the sensitivity of the derived propagation and source parameters to focal depth. Parameters we constrained include the source excitation terms (related to stress drop), a frequency-dependent attenuation operator, a geometric spreading function, and an operator to account for site effects. Our results indicate that seismic-wave attenuation in Kachchh crust is very low, similar to other continental intraplate areas such as central and eastern North America. We also estimated seismic moments and stress drops for the earthquakes by fitting singlecorner- frequency source-model spectra to the observed spectra, corrected for propagation by using our derived parameters. Stress drops were found to scale with seismic moment and to be rather high overall. By using a stochastic point-source model to estimate mainshock ground motions, we found that the distance decay of expected peak ground motions, assuming a stress drop of 15–20 MPa, compare well with the scant observations for the Bhuj earthquake. Ground-motion predictions for Kachchh, based on Bhuj aftershock data, support the idea that the region may have similar hazard to proposed analog areas in North America.
      179  29
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The 2009 Abruzzo Earthquake, Italy

    (2009) ; ;
    Akinci, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    ;
    Malagnini, L.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    ;
    The Abruzzo earthquake on April 6 this year was surprising for several reasons. Although the historical record shows that the city of L’Aquila has suffered intensity IX or higher several times, this earthquake caused stronger shaking than any other in the area for the past 300 years. In addition, the mechanism displays clear extensional stresses in a region characterized by shortening during the Miocene and the mainshock was heralded by a foreshock swarm.
      241  275
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Ensemble Smoothed Seismicity Models for the New Italian Probabilistic Seismic Hazard Map

    We develop a long-term (a few decades or longer) earthquake rate forecast for Italy based on smoothed seismicity for incor- poration in the 2017–2018 Italian Probabilistic Seismic Haz- ard Maps (IPSHM). Because the earthquake rate models from previous IPSHM were computed using source zones that were drawn around seismicity and tectonic provinces, the present model will be the first introduction of the smoothed seismic- ity method into the IPSHM. Smoothed seismicity models are constructed from both historical CPTI15 (Catalogo Parame- trico dei Terremoti Italiani, 1000–2014) and instrumental (1981–2016) earthquake catalogs and use both fixed and adaptive smoothing methods. We compute spatial likelihood values comparing the spatial distribution of observed earth- quakes with a suite of trial earthquake rate models to optimize smoothing parameters and catalogs. Then we produce an en- semble model using two different smoothing models (adap- tive and fixed) and two earthquake catalogs (historical and instrumental), which are weighted equally through a logic- tree approach to improve the forecast capability. We also compare our optimized smoothed seismicity models with the best two models of the Italian Collaboratory for the Study of Earthquake Predictability (CSEP) experiment and retro- spectively test them with the CSEP methodology. We ob- served that the ensemble model performs slightly better than the optimized fixed and the adaptive smoothing seismic- ity models obtained in this study and the best time-indepen- dent model of the CSEP Italian experiment. The preferred ensemble model forecasts an annual rate of 1.47 M ≥ 5:0 earthquakes, with higher rates mainly concentrating along the Apennines chain, eastern Alps, Calabria, and northeast Sicily. Finally, six ensemble models are created from the differ- ent smoothing methods using different weights through a logic-tree approach to estimate the uncertainty associated with the model.
      884  6