Skip to main content
The search returned 29 results
Now showing 1 - 10 of 29
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Modeling the 2023 Türkiye Earthquakes and Strain Accumulation Along the East Anatolian Fault Zone: Insights from InSAR, GNSS, and Small-Magnitude Seismicity, with Implications for the Seismic Potential at Rupture Terminations

    (Basel : Molecular Diversity Preservation International, 2025-07-02) ; ; ; ;
    The 6 February 2023 MW 7.8 and MW 7.6 earthquakes in southeastern Türkiye ruptured more than 400 km of the East Anatolian Fault Zone (EAFZ), producing one of the most destructive seismic sequences in recent history. Here, we integrate InSAR data, a new GNSS velocity field, and small-magnitude earthquakes to investigate the coseismic deformation, rupture geometry, and interseismic strain accumulation along the EAFZ. Using elastic dislocation modeling with a variable-strike, multi-segment fault geometry, we constrain the slip distribution of the mainshocks, showing improved fits to the surface displacement compared to the planar fault model. The MW 7.8 event ruptured a number of fault segments over ~300 km, while the MW 7.6 event activated a more localized fault system with a peak slip exceeding 15 m. We also model two moderate events (MW 5.6 in 2020 and MW 5.3 in 2022) along the southwestern part of the Pütürge segment—an area not ruptured during the 2020 or 2023 sequences. GNSS-derived strain-rate and locking depth estimates reveal strong interseismic coupling and significant strain accumulation in this region, suggesting the potential for a future large earthquake (MW 6.6–7.1). Similarly, the Hatay region, at the southwestern termination of the 2023 rupture, shows a persistent strain accumulation and complex fault interactions involving the Dead Sea Fault and the Cyprus Arc. Our results demonstrate the importance of combining remote sensing and geodetic data to constrain fault kinematics, evaluate rupture segmentation, and assess the seismic hazard in tectonically active regions. Targeted monitoring at rupture terminations—such as the Pütürge and Hatay sectors—may be crucial for anticipating future large-magnitude earthquakes.
      8  26
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Unveiling Tectonic Complexities in the 2024 Hualien (eastern Taiwan) Earthquake Sequence Using GNSS and InSAR Data

    Taiwan, located at the convergent boundary between the Philippine Sea and Eurasian plates, is one of the most seismically active regions globally, with convergence rates reaching 80-90 mm/yr. The Longitudinal Valley suture zone in eastern Taiwan, accommodating ~30 mm/yr of NNW-SSE shortening, hosts two major reverse fault systems: the E-dipping Longitudinal Valley Fault (LVF) and the W-dipping Central Range Fault (CRF). These faults exhibit complex interactions, particularly in the northern sector of the Longitudinal Valley, where cross-cutting relationships and evolving tectonic dynamics generate significant seismotectonic complexity. The 2 April 2024 MW 7.4 Hualien earthquake, the strongest instrumentally recorded event near Hualien since the 1951 sequence, exemplifies this complexity. Previous seismic events in this region have been associated with ruptures on both E- and W-dipping faults, reflecting the dynamic interplay between these systems. To investigate the faulting processes and source parameters of this sequence, we analyzed an extensive geodetic dataset, integrating Global Navigation Satellite Systems (GNSS) and Interferometric Synthetic Aperture Radar (InSAR) observations. Elastic dislocation modeling was applied to constrain the rupture geometry and evaluate the interaction between fault segments. GNSS and InSAR data from the 2024 event reveal a rupture pattern involving multiple fault segments, consistent with observations of focal mechanisms, aftershock distributions, and long-term moment release patterns. Although simple single-fault models (e.g., an E-dipping Longitudinal Valley Fault or a W-dipping Central Range Fault) can explain the geodetic data, a composite fault model, incorporating multiple segments, better accounts for the observed displacements, seismicity, and the complex structure of the northern Longitudinal Valley. Our findings provide new insights into the seismogenic processes and fault dynamics underlying this significant seismic event. They highlight the evolving tectonic setting of eastern Taiwan and contribute to the understanding of the processes driving seismotectonic complexity in one of the most tectonically active regions of the world.
      7  30
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Geodetic model of the 2024 January 22 Mw 7.0 Wushi (northwestern China) earthquake and Mw 5.7 aftershock from inversion of InSAR data

    On 2024 January 22, an MW 7.0 earthquake struck the southern sector of the Tian Shan Mountains in Wushi County, northwestern China, causing damage and casualties. In this study, using Interferometric Synthetic Aperture Radar measurements (Sentinel-1 satellites), we constrained the geometry of the fault segment responsible for the seismic event, the coseismic slip distribution, and the source of the subsequent MW 5.7 aftershock deformation. Finally, we evaluated the potential state of stress of the unruptured portions of the causative fault as well as of adjacent fault segments, using the Coulomb stress failure function variations. Our findings indicate rupture along a transpressive left-lateral NNW dipping high-angle fault, associated with the Southern Tian Shan Fault alignment, likely the Maidan fault, with slip up to 3.5 m only occurring between 10 and 20 km depth. The position of the hypocentre with respect to our estimated slip distribution supports the evidence of a marked bilateral ENE–WSW rupture directivity during the mainshock. The modelling of the post-seismic deformation that includes the MW 5.7 aftershock occurred on 2024 January 29, and that is located about 15 km to the south of the mainshock, indicates a main patch with up to 90 cm of slip that may have occurred on a shallow back-thrust segment, in agreement with the observed surface breaks. We propose a potential structural and/or lithological influence on the coseismic rupture extent, consistent with observations from other intracontinental earthquakes. Finally, based on the Coulomb stress distribution computation, we find that the MW 5.7 aftershock was likely triggered by the preceding mainshock and that the Wushi earthquake also increased the stress level at both terminations of the modelled fault plane, particularly along the southwestwards continuation of the Maidan fault. In addition, we also find that a wide up-dip fault patch remained unruptured, and considering that these areas have been dynamically loaded it could represent potential further aseismic deformation and/or future significant ruptures, posing a continuing seismic hazard to Wushi County and surroundings areas.
      15  41
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Insights into the September 8, 2023, MW 6.8 earthquake in Morocco: a deep transpressive fault along the High Atlas Mountain belt

    On September 8, 2023, a magnitude 6.8 earthquake impacted the High Atlas Mountains in western Morocco, approximately 70 km southwest of Marrakesh, resulting in significant devastation and casualties. This study delves into a comprehensive geodetic dataset, utilizing interferometric synthetic aperture radar (InSAR) measurements to analyze the fault segment accountable for the seismic occurrence. Our findings propose two potential fault scenarios: a transpressive NNW-dipping high-angle fault (70°), associated with the Tizi n'Test alignment, or a transpressive SSW-dipping low-angle fault (22°) linked to the North Atlas Fault, where slip (up to 2.2 m) is observed predominantly in deeper sections of the fault. Although seismic catalogs were inconclusive regarding the dip direction of the fault, evidence from mainshock locations, gravity and heat-flow data, along with modeling, and the active shortening direction, collectively indicate the activation of a low-angle, southwesterly dipping oblique thrust of the North Atlas fault during the 2023 Moroccan earthquake. Integrating interferometric analyses with geological, tectonic, and seismological data could be crucial for resolving ambiguities in satellite-based models. This study therefore underscores the complexity of fault identification and the need for a multidisciplinary approach in understanding seismic events.
      5  22
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The European Fault-Source Model 2020 (EFSM20): geologic input data for the European Seismic Hazard Model 2020

    (2024-11-19) ; ; ; ;
    Pires Vilanova, Susana
    <jats:p>Abstract. Earthquake hazard analyses rely on seismogenic source models. These are designed in various fashions, such as point sources or area sources, but the most effective is the three-dimensional representation of geological faults. We here refer to such models as fault sources. This study presents the European Fault-Source Model 2020 (EFSM20), which was one of the primary input datasets of the recently released European Seismic Hazard Model 2020. The EFSM20 compilation was entirely based on reusable data from existing active fault regional compilations that were first blended and harmonized and then augmented by a set of derived parameters. These additional parameters were devised to enable users to formulate earthquake rate forecasts based on a seismic-moment balancing approach. EFSM20 considers two main categories of seismogenic faults: crustal faults and subduction systems, which include the subduction interface and intraslab faults. The compiled dataset covers an area from the Mid-Atlantic Ridge to the Caucasus and from northern Africa to Iceland. It includes 1248 crustal faults spanning a total length of ∼95 100 km and four subduction systems, namely the Gibraltar, Calabrian, Hellenic, and Cyprus arcs, for a total length of ∼2120 km. The model focuses on an area encompassing a buffer of 300 km around all European countries (except for Overseas Countries and Territories) and a maximum of 300 km depth for the subducting slabs. All the parameters required to develop a seismic source model for earthquake hazard analysis were determined for crustal faults and subduction systems. A statistical distribution of relevant seismotectonic parameters, such as faulting mechanisms, slip rates, moment rates, and prospective maximum magnitudes, is presented and discussed to address unsettled points in view of future updates and improvements. The dataset, identified by the DOI https://doi.org/10.13127/efsm20 (Basili et al., 2022), is distributed as machine-readable files using open standards (Open Geospatial Consortium). </jats:p>
      14  70
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A Composite Fault Model for the 2024 MW 7.4 HualienEarthquake Sequence in Eastern Taiwan Inferred FromGNSS and InSAR Data

    On 2 April 2024, an MW 7.4 earthquake struck the northern Longitudinal Valley in eastern Taiwan, about 18 km SSW of Hualien, causing damage and casualties. In this study, we investigated a comprehensive geodetic data set, employing Global Navigation Satellite Systems (GNSS) and Interferometric Synthetic Aperture Radar (InSAR) measurements to assess the rupture geometry associated with earthquake sequence. Although geodetic data can be satisfactorily reproduced by simple single‐fault models (i.e., a high‐ angle E‐dipping plane related to the Longitudinal Valley Fault (LVF), or a gentle W‐dipping surface associated with the Central Range Fault, CRF), a composite model involving the rupture of different fault segments (a major CRF‐related W‐dipping fault, a deep segment of the E‐dipping LVF, and the Milun Fault) is able to explain the observations, the distribution of seismicity, and the complex structural arrangement of the northernmost sector of the Longitudinal Valley.
      20  127
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The 8 September 2023, MW 6.8, Morocco Earthquake: A Deep Transpressive Faulting Along the Active High Atlas Mountain Belt

    On 8 September 2023 an MW 6.8 earthquake struck the High Atlas Mountains of western Morocco, about 70 km southwest from Marrakesh, causing significant devastation and casualties. In this study, we investigate a comprehensive geodetic data set, employing interferometric synthetic aperture radar measurements to assess the fault segment responsible for the seismic event. Our findings suggest two potential fault scenarios: either a transpressive NNW-dipping high-angle (70°) fault related to the Tizi n'Test alignment or a transpressive SSW-dipping low-angle (22°) fault associated with the North Atlas Fault, with slip (up to 2.2 m) only occurring on deeper parts of the fault. While seismic catalogs couldn't definitively determine the dip direction of the fault, evidence from mainshock locations, gravity and heat flow data and modeling, and active shortening direction suggest the activation of a low-angle south-westerly dipping oblique thrust of the North Atlas fault during the 2023 Moroccan earthquake.
      91  151
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Imaging buried anticlines in the Po Plain, northern Italy, based on HVSR frequency and amplitude analyses

    Knowing the location, the extent and the characteristics of any earthquake-induced environmental phenomenon is becoming an increasingly pressing need for civil protection agencies and local administrations. In particular, earthquake-triggered landslides are known for being among the most important sources of secondary hazard, as they may cause significant losses and may delay rescue operations across large areas. The combination of the relatively frequent seismic release with a very high landslide susceptibility makes the Italian territory especially prone to the occurrence of earthquake-induced landslides. The CFTIlandslides dataset features over 1,000 landslides triggered by historical Italian earthquakes (up to 1997). The landslides effects are subdivided into classes based on location accuracy and type of movement. Knowing the distribution of the past earthquake-induced landslides provides the input information for assessing the related hazard. This dataset is addressed to a large audience of potential users, including researchers and scholars, administrators and technicians belonging to local institutions, and civil protection authorities.
      58  53
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Is the Mesochori Fault a Key Structure for Understanding the Earthquake Activity during the 2021 Damasi Earthquakes in Northern Thessaly, Greece?

    On 3 March 2021, an important seismic sequence started in northern Thessaly, Greece. The Damasi Seismic Sequence (DSS) deformed the western sector of the Tyrnavos Graben, which includes a major blind normal fault and the Titarisios River Graben (TRG). In this contribution, we provide fieldwork observations across the TRG and satellite radar interferometry of the faults controlling the graben. In addition, we provide a map of the active faults exposed in the TRG and palaeoseismological analyses of the Mesochori Fault, which together contribute to unravelling the seismic history of the area. DInSAR provides clear evidence of the Mesochori Fault surface rupture during the main shocks, while our palaeoseismological analyses document a long seismic history of the fault, with a mean recurrence interval of 1.0–1.5 ka and a mean slip per event of ~15 cm for the last four events reactivating the scarp. Quantitative geomorphological analyses based on real-time kinematic (RTK) measurements with global navigation satellite system (GNSS) receivers and data from UAV flight campaigns also provide evidence of postseismic activity across the Mesochori Fault. Based on these results showing that (at least) the Mesochori Fault has been reactivated several times in the latest Quaternary the seismotectonics of the TRG are discussed.
      39  121
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Contemporaneous Thick- and Thin-Skinned Seismotectonics in the External Zagros: The Case of the 2021 Fin Doublet, Iran

    In this work, we propose a geodetic model for the seismic sequence, with doublet earthquakes, that occurred in Bandar Abbas, Iran, in November 2021. A dataset of Sentinel-1 images, processed using the InSAR (Interferometric Synthetic Aperture Radar) technique, was employed to identify the surface deformation caused by the major events of the sequence and to constrain their geometry and kinematics using seismological constraints. A Coulomb stress transfer analysis was also applied to investigate the sequence’s structural evolution in space and time. A linear inversion of the InSAR data provided a non-uniform distribution of slip over the fault planes. We also performed an accurate relocation of foreshocks and aftershocks recorded by locally established seismographs, thereby allowing us to determine the compressional tectonic stress regime affecting the crustal volume. Despite the very short time span of the sequence, our results clearly suggest that distinct blind structures that were previously unknown or only suspected were the causative faults. The first Mw 6.0 earthquake occurred on an NNE-dipping, intermediate-angle, reverse-oblique plane, while the Mw 6.4 earthquake occurred on almost horizontal or very low-angle (SSE-dipping) reverse segments with top-to-the-south kinematics. The former, which cut through and displaced the Pan-African pre-Palaeozoic basement, indicates a thick-skinned tectonic style, while the latter rupture(s), which occurred within the Palaeozoic–Cenozoic sedimentary succession and likely exploited the stratigraphic mechanical discontinuities, clearly depicts a thin-skinned style.
      143  122