Skip to main content
The search returned 47 results
Now showing 1 - 10 of 47
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    2D gravity modelling in Central Italy: Clues for the seismogenesis in the Apennines

    (Elsevier BV:PO Box 211, 1000 AE Amsterdam Netherlands:011 31 20 4853757, 011 31 20 4853642, 011 31 20 4853641, EMAIL: nlinfo-f@elsevier.nl, INTERNET: http://www.elsevier.nl, Fax: 011 31 20 4853598, 2026-02-03) ; ; ; ;
    In the Central Apennines (Italy), the most updated reliable 3D geological models of the crust in the area affected by the 2016-17 Amatrice-Visso-Norcia seismic sequence highlighted that the coseismic rupture at the surface can involve old inherited normal faults, while the seismogenic sources lay at depth, possibly reactivating and inverting previous thrust faults, as in the case of the Mw 6.5 Norcia earthquake (30 October 2016). Here, we present a 2D gravity model across the Central Apennines to complete and confirm the crustal geometries resulting from the 3D model itself. The cross-section was built by integrating different data types, including surface geology, hydrocarbon wells, seismic profiles, and results from receiver function analysis. It was then checked against gravity anomalies and the velocity distribution from Local Earthquake Tomography (LET), adding further details, and, finally, against seismicity recorded during the 2016-2017 sequence. The results substantiate the reliability of the geometries proposed in the RETRACE-3D model, as they fit well, except for some local misfits, with other independent data, such as the Bouguer anomalies and the velocity distribution from LET. Furthermore, integrating different data types allowed us to provide a detailed description of the structural setting of the Apennine chain and the surroundings of the RETRACE-3D study area and to identify some new features at seismogenic depths beyond those typically targeted in hydrocarbon exploration. In particular, we were able to investigate the nature of the basement top and its relationship with seismotectonics. Plain language summary: Specific knowledge of the Earth's crust structures and our ability to image them in three dimensions are crucial for improving the understanding of the tectonic processes, particularly those responsible for generating earthquakes. The RETRACE-3D project produced a 3D model of the crust down to depths of 5-10 km in the area of the Central Apennines hit by the 2016-2017 seismic sequence. In this study, we analysed the gravity anomalies along a 2D cross-section to validate these results and to extend our knowledge to the surrounding areas and greater depths. Gravity anomalies make it possible to detect density variations within the crust, which can be related to the presence of specific geological units. Our analysis validated the RETRACE-3D project findings and provided insights into the nature of the upper crust at the base of the sedimentary succession. In particular, we identified an ancient (Permian-Triassic) sedimentary body, whose presence and current position appear to be closely related to the seismotectonics of the area.
      7  94
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Impact of the Earthquake Rupture on Ground-Motion Variability of the 24 August 2016 M w 6.2 Amatrice, Italy, Earthquake

    ([Stanford Calif.]: Seismological Society of America, [1911-, 2024-07-26) ; ; ; ;
    The devastating 24 August 2016 M w 6.2 earthquake that struck Amatrice, Italy, marked the beginning of a prolonged seismic sequence dominated by three subsequent M w ≥ 6.0 events in the central Apennines region. The earthquake destroyed Amatrice's historic center, claiming the lives of 299 individuals and causing widespread damage in the neighboring villages. The severity of the ground shaking, with a recorded maximum acceleration of 850 cm= s 2 on the east-west component at the Amatrice station, was far greater than the predicted acceleration based on the Italian ground-motion model (GMM). As pointed out by several investigations, the observed ground-motion amplitude and its spatial variability during the earthquake can be linked to specific rupture characteristics, including slip distribution and rupture directivity effects revealed by the observed data (Tinti et al., 2016; Pischiutta et al., 2021). In this study, we conducted physics-based 3D numerical simulations of ground motion for the Amatrice earthquake for frequencies up to 3 Hz. We employed a series of kinematic rupture models and a well-constrained local 3D velocity model incorporating surface topography. The kinematic rupture realizations were generated using multiscale hybrid and fully stochastic models, following the technique proposed by Graves and Pitarka (2016). We focused on assessing the sensitivity of near-fault ground-motion amplitudes to earthquake rupture characteristics, in particular, the spatial slip pattern. To evaluate the quality of our simulations, we employed goodness-of-fit measurements performed in comparisons of simulated and recorded ground motions. The simulated ground motions compare well with the recorded data and predictions from GMMs for Italy, ITA18 (Lanzano et al., 2019). However, we found that the simulated interevent ground-motion variability (randomness in the source process) of peak ground velocity, σ (PGV) is higher than the constant σ (PGV) predicted by conventional GMMs. Our simulations using several rupture scenarios demonstrate that the near-fault groundmotion amplification pattern is directly related to the slip distribution pattern. KEY POINTS • The near-fault ground-motion amplification pattern is related to the size and distribution of the slip. • The rupture directivity is controlled by location of the rupture initiation relative to the large slip patches. • Peak ground velocity interevent variability is distance dependent and higher at shorter distances than that of constant ground-motion models.
      12
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Tectonic-Sedimentary evolution of the Tuscan shelf (Italy): Seismic-stratigraphic/structural analysis of Neogenic succession in the Tyrrhenian Sea between Elba Island and Monte Argentario promontory

    between Elba Island and Monte Argentario promontory, was performed to reappraise the Tuscan shelf tectonic evolution. Despite the almost flat geometry of the seafloor, seismic profiles show a corrugated morphology of the pre-neogenic deformed acoustic basement, organized in structural highs and narrow, mostly N-S and NNW-SSE basins. We identified an intimate relationship between the thrust-related structural highs and the position of the basins, principally located at the forelimb and backlimb of major antiforms, a legacy of a primarily Miocene compressional stage. During the middle Miocene, the Tyrrhenian Sea opening set up, and the extensional front migrated from west to east, progressively activating and deactivating the observed high-angle faults, blandly controlling the sedimentation within the basins. After the late Messinian, a regional collapse stage led to the deepening and widening of the basins. A progressive deactivation of all the normal faults is recorded from the lower Pliocene. After the Late Pliocene/early Pleistocene, the area turned into a passive and widespread sinking stage without any frank tectonic activity. Results show that regional thrusts shaped the main architecture of the Tuscan Shelf shallow crust, while the neogenic depocenters started to develop as thrust-top basins along the flanks of the inherited antiforms. Intriguingly and partially in contrast with previous works, no evidence of lowangle normal fault was observed. We propose an innovative model that poses new questions on the crustal-scale mechanisms responsible for Tyrrhenian extensional process-related features, also establishing a new and unique starting point for fully unraveling the tectonic evolution of this portion of central Italy's offshore domain.
      85  101
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Buried Alive: Imaging the 9 November 2022, Mw 5.5 Earthquake Source on the Offshore Adriatic Blind Thrust Front of the Northern Apennines (Italy)

    The prompt identification of faults responsible for moderate-to-large earthquakes is fundamental for understanding the likelihood of further, potentially damaging events. This is increasingly challenging when the activated fault is an offshore buried thrust, where neither coseismic surface ruptures nor GPS/InSAR deformation data are available after an earthquake. We show that on 9 November 2022, an Mw 5.5 earthquake offshore Pesaro ruptured a portion of the buried Northern Apennines thrust front (the Cornelia thrust system [CTS]). By post-processing and interpreting the seismic reflection profiles crossing this thrust system, we determined that the activated fault (CTS) is an arcuate 30-km-long, NW-SE striking, SW dipping thrust and that older structures at its footwall possibly influenced its position and geometry. The activation of adjacent segments of the thrust system is a plausible scenario that deserves to be further investigated to understand the full earthquake potential of this offshore seismogenic source.
      635  273
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Scattering Attenuation Images of the Control of Thrusts and Fluid Overpressure on the 2016–2017 Central Italy Seismic Sequence

    Deep fluid circulation likely triggered the large extensional events of the 2016–2017 Central Italy seismic sequence. Nevertheless, the connection between fault mechanisms, main crustal-scale thrusts, and the circulation and interaction of fluids with tectonic structures controlling the sequence is still debated. Here, we show that the 3D temporal and spatial mapping of peak delays, proxy of scattering attenuation, detects thrusts and sedimentary structures and their control on fluid overpressure and release. After the mainshocks, scattering attenuation drastically increases across the hanging wall of the Monti Sibillini and Acquasanta thrusts, revealing fracturing and fluid migration. Before the sequence, low-scattering volumes within Triassic formations highlight regions of fluid overpressure, which enhances rock compaction. Our results highlight the control of thrusts and paleogeography on the sequence and hint at the monitoring potential of the technique for the seismic hazard assessment of the Central Apennines and other tectonic regions.
      136  109
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A multidisciplinary approach gives new insights into the shallow structural setting of the Val d'Agri oilfield (Basilicata, southern Apennines, Italy);

    The Val d’Agri (VA) oilfield in the Lucanian Apennines (southern Italy), represents the largest onshore in Europe. Since the 1990's, hydrocarbons are produced from a fractured carbonate reservoir with an average extraction rate of 7*104 barrels/day of oil and 3*106 Smc/day of gas. Part of the wastewater has been re-injected since 2006 into a marginal portion of the reservoir by a high-rate well (Costa Molina 2, CM2). Charged by the Italian oil and gas safety authority, the National Institute of Geophysics and Volcanology (INGV) monitors the VA industrial hydrocarbon operations through the research activity of a dedicated working group (CMS, Centro di Monitoraggio del Sottosuolo) and according to the governmental monitoring guidelines. The CMS operates the real-time acquisition and offline analyses of seismic data recorded at 56 seismic stations associated with public and private local seismic networks. The principal aim of the CMS is to investigate the risk associated with industrial activities that can induce or trigger seismic events by producing stress changes within the upper crustal volume. Previous works have highlighted a spatio-temporal relationship between micro-seismicity (ML ≤ 2.2) and wastewater injection, delineating a NE-dipping back-thrust near the CM2. Part of the microseismicity recorded in the southwestern portion of the VA has also been associated with the water level changes of the Pertusillo lake. One of the main challenges is to define an accurate structural setting of the VA to understand the potential of earthquakes in the area and investigate the presence of active faults. The VA consists of a Quaternary extensional tectonic basin and it is one of the areas of highest seismic hazard in Italy (Basilicata, 1857, M7 earthquake). The basin is bounded by two parallel and oppositely dipping normal fault systems: the Monti della Maddalena Fault System (MMFS) on its western side and the Eastern Agri Fault System (EAFS) on the eastern one. The characterization of the ongoing tectonic activity of the MMFS and EAFS, and their hierarchical relationship is still generating debate among the scientific community. We adopt a multidisciplinary approach based on detailed geological-structural, geophysical and seismic analyses, and electrical resistivity tomography, aimed at reconstructing the subsurface geology of the area and recognizing and characterizing the active and capable faults, and the associated potential for local seismic hazard. We present and discuss the results of this work, focusing on the relative location of seismic events that occurred between March and June 2022. The outcomes allow inferring interesting geologic constraints, highlighting the relationships between the distribution of local seismicity and the structural setting of the area in the uppermost crust (depth < 6 km).
      81  195
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Esercitazione nazionale “Exe Sisma dello Stretto 2022” 04-06 novembre 2022. Rapporto di sintesi del Gruppo Operativo SISMIKO.

    Da venerdì 4 novembre a domenica 6 novembre 2022, si è tenuta una esercitazione nazionale denominata “Exe Sisma dello Stretto 2022” in un'area del territorio della Regione Calabria e della Regione Sicilia caratterizzata da una elevatissima pericolosità sismica. L’esercitazione è stata indetta e coordinata dal Dipartimento della Protezione Civile e aveva l’obiettivo di verificare la risposta operativa a un evento sismico significativo del Servizio Nazionale della Protezione Civile, di cui anche l’Istituto Nazionale di Geofisica e Vulcanologia fa parte. Durante le tre giornate, l’INGV ha avuto modo di testare tutte le procedure che l’Istituto ha codificato a partire da quelle del “Protocollo di Ente per le emergenze sismiche e da maremoto”. Dopo che INGV ha dato l’avvio all’intera esercitazione simulando il terremoto di magnitudo MW 6.2 (ML 6.0) alle ore 09:00 UTC in provincia di Reggio Calabria (5 km a SW dal comune di Laganadi), e ha, quindi, inviato il messaggio per il potenziale maremoto con un livello di allerta arancione; inoltre, il Presidente INGV ha prontamente convocato l’Unità di Crisi e attivato tutti Gruppi Operativi. Questi ultimi, nell’ambito dello scenario esercitativo, hanno verificato che i flussi di comunicazione interna e tutte le attività necessarie in emergenza sismica, presenti nei relativi protocolli operativi, risultassero rispettati. L’obiettivo primario dell’esercitazione è stato quindi quello di validare le attività previste e di aggiornare il personale afferente ai Gruppi Operativi stessi. Tra di essi, SISMIKO, che rappresenta il GO dedicato al coordinamento delle reti sismiche mobili INGV in emergenza, nelle settimane precedenti l’esercitazione ha predisposto tutte le attività che intendeva testare, descrivendole brevemente nel Documento d’impianto INGV e con maggior dettaglio in quello del Gruppo Operativo. A pochi giorni dalla chiusura dell’esercitazione, un terremoto di magnitudo ML 5.7 (MW 5.5) registrato alle ore 06:07 UTC del 09 novembre 2022 ha spostato l’attenzione dalla simulazione alla realtà.
      452  262
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Rapporto di sintesi del Gruppo Operativo SISMIKO a seguito del terremoto al largo della costa marchigiana settentrionale (Italia). MW 5.5 del 09-11-2022 ore 06:07 UTC

    Il 09 novembre 2022 alle ore 06:07 UTC (07:07 ora italiana) un terremoto di magnitudo ML 5.7 (MW 5.5) è stato localizzato dal sistema di sorveglianza sismica dell’Istituto Nazionale di Geofisica e Vulcanologia (INGV). L'epicentro è stato localizzato nel Mar Adriatico ad una distanza di circa 30 km dalla costa marchigiana in provincia di Pesaro e Urbino, a circa 31 km dalla città di Fano e 35 km dal capoluogo di provincia Pesaro. Il mainshock è stato seguito da una replica di ML 5.2 a un minuto di distanza. I due terremoti sono stati ben avvertiti in tutta la regione Marche, e anche in tutto il centro Italia fino a Roma e nelle regioni del nord Italia. Il Presidente dell’INGV, come previsto nel Protocollo di Ente per le emergenze sismiche e da maremoto, ha prontamente convocato l’Unità di Crisi e attivato tutti i Gruppi Operativi. Tra questi SISMIKO, che coordina le reti sismiche mobili INGV in emergenza, si è attivato immediatamente preparando la strumentazione necessaria per l’installazione di una rete sismica temporanea e per l’integrazione dei dati in acquisizione nel sistema di monitoraggio e sorveglianza sismica dell’INGV. Parallelamente alle attività di coordinamento e gestione dell’emergenza sono state attivate tutte le procedure inerenti la divulgazione (report, siti web, ecc) e l’analisi dei dati preliminari. La rete temporanea in emergenza è stata installata nelle prime 24 ore dalla scossa principale ad integrazione della rete sismica permanente dell’INGV in area epicentrale. La rete temporanea di SISMIKO, costituita da 8 stazioni sismiche trasmesse in tempo reale, ha permesso di migliorare il monitoraggio dell’evoluzione della sequenza, abbassando la soglia di detezione degli eventi sismici in area epicentrale e consentendo quindi una migliore localizzazione da parte del servizio di sorveglianza sismica nazionale. La gestione dell’emergenza sismica è avvenuta a pochi giorni di distanza dall’ esercitazione nazionale denominata “EXE Sisma dello Stretto 2022” svoltasi dal 4 al 6 Novembre 2022 nel territorio della Regione Calabria e della Regione Sicilia. L’esercitazione è stata coordinata dal Dipartimento della Protezione Civile. Le attività svolte durante EXE 2022 sono state per l’istituto, e in particolare per SISMIKO, propedeutiche per il buon esito di tutte le azioni messe in campo dall’INGV sin dai primi minuti dall’accadimento del mainshock del 9 Novembre.
      240  167
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Revitalizing vintage seismic reflection profiles by converting into SEG-Y format: case studies from publicly available data on the Italian territory

    In recent decades, geological modeling has significantly evolved, relying on the growing potential of hardware and software to manage and integrate vast datasets of 2D-3D geophysical underground data. Therefore, digitization and integration with other forms of data can often improve understanding of geological systems, even when using so-called vintage or historical data. Seismic reflection data have been extensively acquired mainly for hydrocarbon exploration since the 60s generating large volumes of data. Typically, these data have been for private commercial use and are relatively unavailable for research. However, with time, large volumes of vintage seismic reflection data in many countries worldwide are now becoming publicly available through time-based de-classification schemes. Such data have a great potential for modern-day geo-research, unleashing opportunities to improve geological understanding through re-interpretation with modern methods. However, a downside of these vintage data is that they are often only available in analog (paper, raster) format. The vectorization of these data then constitutes an essential step for unlocking their research potential. In 2018 INGV established the SISMOLAB-3D infrastructure, which is mainly devoted to analyzing digital subsurface data, such as seismic reflection profiles and well-logs, to build 2D-3D geological models, principally for seismotectonics, seismic hazard assessment, and geo-resources applications. In this contribution, we discuss the robustness of the WIGGLE2SEGY code, firstly published by Sopher in 2018, focusing on examples from different tectonic and geodynamic contexts within Italian territory. We applied the SEG-Y conversion method to onshore and offshore raster seismic profiles related to ceased exploration permits, comparing the results with other published archives of SEG-Y data obtained from the conversion of vintage data. Such an approach results in digital SEG-Y files with unprecedented quality and detail. The systematic application of this method will allow the construction of a comprehensive dataset of digital SEG-Y seismic profiles across Italy, thereby expanding and sharing the INGV SISMOLAB-3D portfolio with the scientific community to foster innovative and advanced scientific analysis.
      703  491
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Deterministic 3D Ground-Motion Simulations (0–5 Hz) and Surface Topography Effects of the 30 October 2016 Mw 6.5 Norcia, Italy, Earthquake

    TheMw6.5 Norcia, Italy, earthquake occurred on 30 October 2016 and caused extensive damage to buildings in the epicentral area. The earthquake was recorded by a network of strong-motion stations, including 14 stations located within a 5 km distance from the two causative faults. We used a numerical approach for generating seismic waves from two-hybrid deterministic and stochastic kinematic fault rupture models propagating through a 3D Earth model derived from seismic tomography and local geology. The broadband simulations were performed in the 0–5 Hz frequency range using a physics-based deterministic approach modeling the earthquake rupture and elastic wave propagation. We used SW4, a finite-difference code that uses a conforming curvilinear mesh, designed to model surface topography with high numerical accuracy. The simulations reproduce the amplitude and duration of observed near-fault ground motions. Our results also suggest that due to the local fault-slip pattern and upward rupture directivity, the spatial pattern of the horizontal near-fault ground motion generated during the earthquake was complex and characterized by several local minima and maxima. Some of these local ground-motion maxima in the near-fault region were not observed because of the sparse station coverage. The simulated peak ground velocity (PGV) is higher than both the recorded PGV and predicted PGV based on empirical models for several areas located above the fault planes. Ground motions calculated with and without surface topography indicate that, on average, the local topography amplifies the ground-motion velocity by30%. There is a correlation between the PGV and local topography, with the PGV being higher at hilltops. In contrast, spatial variations of simulated PGA do not correlate with the surface topography. Simulated ground motions are important for seismic hazard and engineering assessments for areas that lack seismic station coverage and historicalrecordings from large damaging earthquakes.
      459  163