Pesci, Arianna
Preferred name
Pesci, Arianna
Email
arianna.pesci@ingv.it
Staff
staff
ORCID
107 results
Filters
Settings
The search returned 107 results
Now showing 1 - 10 of 107
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Analyzing Virtual Reference Station for GPS surveying: experiments and applications in a test site of the northern Apennine (Italy).
(2008-08); ; ; ; The availability of a GPS network of 10-20 km mean size, provides good topographical support for the measurement of ground displacements, even at a local scale such as a landslide. In particular, a series of multitemporal kinematic or rapid-static GPS acquisitions of a landslide allows a good characterization of its displacements if the measurements are referred to a GPS reference network. Nevertheless, a wider network formed by stations located at long distances, for example at several tens of kilometers, characterized by large spacing, can lead to results affected by high noise, degrading the accuracy of final point positions. In order to obtain an adequate GPS reference network, some virtual reference stations (VRSs) can be introduced, even if a network refinement based on VRS cannot reach the same accuracy of a real local network. Some experiments, including measurements on a real landslide, have been performed in order to evaluate the performance of this technique. The results point out that the standard deviation of the obtained solutions is about two or three times larger than those which can be reached using a real local network.322 716 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , GPS-based monitoring of land subsidence in the Po Plain (Northern Italy)
(2009-10-04); ; ; ; We use regional and local networks of continuously-operating GPS stations (CGPS) distributed in the northern–central part of the Italian peninsula to investigate the subsidence phenomenon of the Po plain sedimentary basin and vertical movements of the surrounding areas. The observations of 146 scientific and commercial stations are analyzed and compared, adopting analytical techniques widely used to study GPS coordinate time series. The use of simple antenna supports in commercial installations, instead of a more rigorous geodetic monument, does not seem to induce significant differences in the noise characteristics and in the amplitudes of annual and semi-annual periodic signals. The vertical velocity field deduced from 129 sites with observation time spans greater than one year, located in the Central–Northern Italian Peninsula, indicates the presence of two mainly subsidence areas: the Po Plain and the Arno Plain, while the sites located in the Alps and Apennine domains show relatively low uplift. The areas of the Po Plain monitored by GPS seem to indicate that the subsidence rate is constant or, in some cases, decreasing with respect to the values obtained from the last measurements, performed up to 2006 by means of both SAR and levelling techniques. Only the central part of the eastern Po Plain close to the Apennine border (Modena city area) is characterized by a peak in subsidence consisting in a velocity of about 15 mm/yr.317 313 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Studio multiparametrico dell’arcipelago di Panarea (Isole Eolie): primi risultati dei rilievi geodetici, geofisici e geologici
(2005-11-15); ; ; ; La recente crisi esalativa di Panarea ha indotto ad effettuare uno studio sistematico dell’area con tecniche GPS, batimetrie ad alta risoluzione, rilievi gravimetrici e di suscettività magnetica, rilievi geologici sottomarini e terrestri. I rilievi batimetrici hanno permesso di individuare la posizione e la estensione dei centri esalativi principali e il campo di fratturazione; quelli gravimetrici e di suscettività magnetica mostrano anomalie nel fianco occidentale di Panarea (formazione Punta Cardosi). I dati GPS, acquisiti sia sulla rete locale che nelle stazioni continue di Lisca Bianca e Panarea, mostrano una deformazione dell’area che è in accordo con il trend del campo di fratturazione attivo stimato dai rilievi geologici sottomarini e terrestri.158 126 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The 2012 Emilia earthquake in northern Italy: coseismic geological effects within a compressive tectonic framework.
(2012-12-03) ;EMERGEO, Working Group; ; ; On May 20 2012 a Ml 5.9 seismic event hit the Emilia Po Plain area (northern Italy) triggering an intense earthquake activity along a broad area of the Plain. Nine days later, on May 29 a Ml 5.8 event occurred roughly 10 km to the SW of the first main shock; these events caused 26 victims and several injured and damages. The aftershock area extended for more than 50 km, in WNW-ESE direction, including five major aftershocks with 5.1≤Ml≤5.3 and more than two thousands of minor events. In general, the seismic sequence was confined in the upper 10 km of depth (ISIDe, http://iside.rm.ingv.it/). The focal mechanisms calculated for the main events and also for several M>4.5 aftershocks are almost all consistent with a compression (P-axes) N-S oriented due to thrust fault mechanisms. The two nodal planes, both E-W oriented, show a 40° southward and 60-70° northward dipping plane (QRCMT, Quick Regional Moment Tensors, http://autorcmt.bo.ingv.it/quicks.html), connected with the compressional regime of the area. From a tectonic point of view, the active Apennine thrust fronts, buried under the Po Plain Plio-Quaternary sediments, locally consist of three N-verging arcs. The most external structures, the active Ferrara and Mirandola thrusts and folds are responsible for the Emilia Romagna 2012 earthquake sequence. Just after the 20th May seismic event, the EMERGEO Working Group was active in surveying the epicentral area searching for coseismic geological effects. The survey lasted one month, involving about thirty researchers and technicians of the INGV in field and aerial investigations. Simultaneously, a laboratory-working group gathered, organized and interpreted the observations, processing them in the EMERGEO Information System (siE), on a GIS environment. The most common coseismic effects are: 1) liquefactions related to overpressure of aquifers hosted in buried and confined sand layers, occurring both as single cones or through several aligned vents forming coalescent sand blows; 2) extensional fractures with small vertical throws, apparently organized in an en-echelon pattern, observed mainly in the eastern sector and in the central area; 3) liquefactions directly associable to fractures where huge amounts of liquefied sand and fine sand was ejected from fractures tens of meters long. The dip of the fault plane, the depth of the main shock and the magnitude indeed did not induce any primary rupture at the surface.328 505 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Integration of ground-based laser scanner and aerial digital photogrammetry for topographic modelling
(2007-02-23); ; ; ; This work deals with the integration of different surveying methodologies for the definition of very accurate Digital Terrain Models (DTM) and/or Digital Surface Models (DSM): in particular, the aerial digital photogrammetry and the terrestrial laser scanning were used to survey the Vesuvio volcano, allowing the total coverage of the internal cone and surroundings (the whole surveyed area was about 3 km×3 km). The possibility to reach a very high precision, especially from the laser scanner data set, allowed a detailed description of the morphology of the volcano. The comparisons of models obtained in repeated surveys allow a detailed map of residuals providing a data set that can be used for detailed studies of the morphological evolution. Moreover, the reflectivity information, highly correlated to materials properties, allows for the measurement and quantification of some morphological variations in areas where structural discontinuities and displacements are present.299 967 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Editorial: Management and monitoring of natural disasters using remote sensing and ground-based data
Editorial on the Research Topic Management and monitoring of natural disasters using remote sensing and ground-based data38 28 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , SURMODERR: A MATLAB toolbox for estimation of velocity uncertainties of a non-permanent GPS station
(2010-03-02); ; ; ;Teza, G.; Dipartimento di Geoscienze, Università degli studi di Padova, Padova, ItalyPesci, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Bologna, Bologna, ItaliaSURMODERR is a MATLAB toolbox intended for the estimation of reliable velocity uncertainties of a non-permanent GPS station (NPS), i.e. a GPS receiver used in campaign-style measurements. The implemented method is based on the subsampling of daily coordinate time series of one or more continuous GPS stations located inside or close to the area where the NPSs are installed. The continuous time series are subsampled according to real or planned occupation tables and random errors occurring in antenna replacement on different surveys are taken into account. In order to overcome the uncertainty underestimation that typically characterizes short duration GPS time series, statistical analysis of the simulated data is performed to estimate the velocity uncertainties of this real NPS. The basic hypotheses needed to apply the method are: i) the signal must be a long-term linear trend plus seasonal and colored noise for each coordinate; ii) the standard data processing should have already been performed to provide daily data series; iii) if the method is applied to survey planning, the future behavior should not be significantly different from the past behavior. In order to show the strength of the approach, two case studies with real data are presented and discussed (Central Apennine and Panarea Island, Italy). Keywords: Non-permanent GPS; Episodic GPS; Campaign-style GPS; Velocity Field; Strain Rate; Survey Optimization.530 51 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , grid_strain and grid_strain3: software packages for strain field computation in 2D and 3D environment
(2007-09-23); ; ; ;Teza, G.; Geoscienze, Università PadovaPesci, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione di BolognaTwo MatlabTM software packages for strain field computation, starting from displacements of experimental points (EPs), are here presented. In particular, grid_strain estimates the strain on the nodes of a regular planar grid, whereas grid_strain3 operates on the points of a digital terrain model (DTM). In both cases, the computations are performed in a modified least square approach, emphasizing the effects of nearest points. This approach allows users to operate at different scales of analysis by introducing a scale factor to reduce or also exclude too far points from grid nodes. The input data are displacements (or velocities) that can be provided by several techniques (e.g. GPS, total topographical station, terrestrial laser scanner). The analysis can be applied to both regional- and local-scale phenomena, to study tectonic crustal deformations or rapid landslide collapses, and to characterize the kinematics of the studied system. Errors on strains and geometric significance of the results are also provided.365 87 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The first Italian blast-induced liquefaction test (Mirabello, Emilia-Romagna, Italy): description of the experiment and preliminary results
Soil liquefaction can result in significant settlement and reduction of load-bearing capacity. Moreover, the generation of pore pressure during an earthquake and its post-seismic dissipation can generate permanent deformations and settlements. The quantitative evaluation of post-liquefaction settlements is of extreme importance for engineering purposes, i.e. for earthquake-resistant design of new buildings and safety evaluation of existing ones. Quantifying the extent of these phenomena is, however, rather difficult. Uncertainties arise from the stochastic nature of the earthquake loading, from the simplifications of soil models, and from the difficulty in establishing correlations between the pre-earthquake soil state and the post-seismic deformations. Field scale liquefaction tests, under controlled conditions, are therefore important for a correct quantification of these phenomena. Recent experiences (e.g. New Zealand, United States) show that liquefaction can be induced and monitored with field scale blast tests to study the related effects on soil geotechnical properties. Within this framework this paper introduces the preliminary results obtained from a research project on blast-induced liquefaction at field scale. Tests were performed at a trial site located in Mirabello (Ferrara, Italy), a village strongly affected by liquefaction phenomena during the 2012 Emilia Romagna earthquake. Invasive tests, such as piezocone, seismic dilatometer and down-hole tests, and non-invasive tests were carried out before and after the execution of two blast test sequences to study the variation in physical properties of the soils. Pore pressure transducers, settlement profilometers and accelerometers were installed with the objective of measuring, during and after the detonations, the generation and subsequent dissipation of the pore pressure, the vertical deformations, and the blast-induced ground motions respectively. Variations in load distribution on deep foundations due to soil liquefaction were also evaluated on a test micropile instrumented with a strain gauge array. Topographical surveys were carried out to measure ground surface settlements. Laboratory tests and trenches also provided increased understanding of the site characteristics.1606 185 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Terrestrial laser scanner and retro-reflective targets: An experiment for anomalous effects investigation
Artificial targets are generally used in terrestrial laser scanner (TLS) practice for data georeferencing. This is because they are well recognized and modelled from the point cloud and their positions can be contemporarily measured by topographical techniques. The accuracy of target identification directly influences the georeferencing quality. In particular, retro-reflective materials can cause anomalies in range measurement due to the too high amplitude of the returned pulse. If the received pulse intensity exceeds the limits of the sensor dynamic range, the receiver saturates, producing a truncated pulse preventing the correct time-of-flight computation. A series of experiments was performed in order to test the performances of a specific instrument (Optech ILRIS 3D) for the acquisition of artificial targets made of retro-reflective material, resulting in very high reflectance. Dealing with ranges lower than about 300m, two cases were clearly observed: the wrong distance measurement of points over high reflecting surfaces and the presence of haloes around these surfaces. Neglecting these phenomena has serious implications and can lead to wrong georeferencing. Experiments were executed and data was analysed, providing a qualitative and semi-quantitative phenomenon description. Finally, the design of a target that can be easily recognized and correctly modelled was proposed.63 2
