Skip to main content
The search returned 43 results
Now showing 1 - 10 of 43
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Guidelines for the Scientific Evaluation of an NSHM: The Legacy of the MPS19 Italian Model

    ([Stanford Calif.]: Seismological Society of America, [1911-, 2025-08-12) ; ; ; ;
    In many countries, the acceptance of a new National Seismic Hazard Model (NSHM) to be used in risk reduction strategies usually comes after a deep scrutiny and analysis of the differences with the previous NSHM, in terms of their scientific reliability and of the practical applicability for building code purposes. These two requirements are fully legitimate, but they are conceptually very different and often mixed up in the scientific and public discussion. Although we acknowledge that any use of an NSHM in terms of risk reduction strategies ought to consider many additional nonscientific challenges, we claim that NSHM is a scientific model; hence, its credibility is intimately and exclusively related to its scientific reliability. Stimulated by how the last NSHM in Italy has been evaluated, in this article, we discuss in detail how to test the reliability of an NSHM with the available data, and the meaning of comparing the outcomes of the new and old NSHMs. Finally, we propose recommendations that may guide any scientists to navigate across the tumultuous process of assessing the scientific reliability of an NSHM and comparing, meaningfully, the outcomes of different NSHMs.
      6  6
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Characteristics and modelling of slip-rate variability and temporal earthquake clustering across a distributed network of active normal faults constrained by in situ 36Cl cosmogenic dating of fault scarp exhumation, central Italy

    (Elsevier Science Limited:Oxford Fulfillment Center, PO Box 800, Kidlington Oxford OX5 1DX United Kingdom:011 44 1865 843000, 011 44 1865 843699, EMAIL: asianfo@elsevier.com, tcb@elsevier.co.UK, INTERNET: http://www.elsevier.com, http://www.elsevier.com/locate/shpsa/, Fax: 011 44 1865 843010, 2025-06) ; ; ; ;
    We present a compilation of new and unpublished in situ 36 Cl cosmogenic isotope data recording the exhumation of 27 active normal fault planes by earthquake slip for the central Apennines, Italy. We do this to constrain the characteristics of slip-rate variability and temporal earthquake clustering and anticlustering across the entire extending orogen, and to assess why it occurs. From the 36 Cl observations we report(1) the long-term slip-rates averaged since 20 ka, (2) the percentage of sites with clusters and anticlusters in each 1 kyrs time-slice back to 20 ka, (3) regional maps showing cluster locations for every 1 kyr time-slice, (4) cluster and anticluster durations, and (5) the amounts of slip and slip-rates averaged over the duration of clusters and anticlusters. To study why this slip-rate variability has developed we conduct modelling of stress interactions between faults and underlying shear-zones, and between neighbouring fault/shear-zone structures. We show that the measured slip-rate variability and temporal clustering can be replicated by a model where the transfer of differential stress between faults and their underlying shearzones, and between neighbouring fault/shear-zone structures, produces changes in strain-rates on underlying viscous shear-zones which drive periods of rapid or reduced slip-rate on their overlying faults. We suggest that stress and hence strain-rate increase on an underlying shear-zone produced by coseismic slip on its overlying fault is the mechanism that initiates an earthquake cluster. Clusters progress because the increased strain-rate on the shear-zone reloads the overlying fault producing a positive feedback loop. The clusters also produce stress reduction on fault/shear-zones located across strike, initiating anticlusters in those locations. The durations of anticlusters will be set by the summed coseismic and interseismic stress changes through time, because although these shear-zones develop relatively low viscous strain-rates, eventually they will load their overlying fault to failure initiating a new cluster. These interactions cause the locations of clusters and anticlusters to migrate across and along-strike within the fault system. Such constraints on the processes producing clustering and anticlustering should allow observations of these phenomena to be included in probabilistic seismic hazard assessments (PSHA), and interpretations of the rheology of deforming continental crust.
      9
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Scoring and ranking probabilistic seismic hazard models: an application based on macroseismic intensity data

    A probabilistic seismic hazard model consists of a set of weighted models/branches that describes the center, the body and the range of seismic hazard. Owing to the intrinsic nature of this kind of analysis, the weight of each model/branch represents its scientific credibility. However, practical uses of this model may sometimes require the selection of one or a few hazard curves that are sampled from the whole model, which often consists of thousands of branches. Here we put forward an innovative procedure that facilitates the scoring, ranking and selection of the hazard curves to account for the requirements of a specific application. The approach consists of a careful quality check of the data used for scoring and the adoption of a proper scoring rule. To show the applicability of this approach, we present an example that consists of scoring and ranking a set of multiple models/branches constituting a recent seismic hazard model of Italy. To score these branches, hazard estimates produced by each of them are compared with time series of macroseismic observations available in the Italian macroseismic database for a carefully selected set of localities deemed sufficiently representative, homogeneously distributed in space and complete with respect to time and intensity levels. The proper scoring parameter used for such a comparison is the logarithmic score, which can always be applied independently of the distribution of the data.
      113  95
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Scenario-based seismic hazard for horizontal and vertical ground motions in central Italy

    We propose an innovative methodology for seismic emergency planning and earthquake risk mitigation in central Italy by integrating three prototypal earthquake scenarios. The different scenarios derive maximum earthquake magnitudes from different input data. The first scenario utilizes local rheological, geological, and geophysical conditions; the second scenario considers the study area fault characteristics, while the third scenario relies on the cluster analysis of historical and instru- mental earthquake records. The magnitudes and related uncertainties are combined using a conflation method to derive the expected ground motions for a grid of sites in central Italy. The resulting scenarios include peak ground acceleration and spectral ordinates, presented as maps and spectra for two selected localities. The vertical component of ground motion is also presented, because it is essential for accurately assessing the response of short-period structures. Our methodology complements the more classic seismic hazard analyses, offering additional insights for earthquake contingency planning and loss analysis. The proposed methodology is flexible; multiple models and ongoing advancements in scenario practice (near-field effects, vertical ground motion, and the choice of ground motion models) can be easily incorporated, increasing the effectiveness of seismic scenario modeling in seismic emergency planning and risk mitigation.
      61  110
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A site-specific earthquake ground response analysis using a fault-based approach and nonlinear modeling: the Case Pente site (Sulmona, Italy)

    In this paper we present the ground response analyses (GRA) of a site where an industrial facility is planned. Because of its location on an active normal fault system known as a relevant seismic gap, the Mt. Morrone Fault system (MMF), and at the edge of a basin filled with slow velocity continental deposits, a inter-disciplinary and non-standard approach has been applied to assess the seismic input of the dynamic numerical analyses. It includes geological, seismological, geotechnical and engineering contributions. Two fault scenarios, MMF1 and MMF2, were considered and scenario-based (SSHA) and probabilistic (time-dependent, TD, and time-independent, TI) seismic hazard (PSHA) analyses were implemented. Comparison among the spectra corresponding to the 90th percentile of the SSHA statistical distribution and the PSHA average ones, shows that the MMF2 has values similar to the TD model. The SSHA 90th percentile distribution was selected as target spectra to retrieve the seismic input for GRA. Nonlinear numerical simulations of seismic wave propagation were implemented to derive surface ground motion parameters. GRA acceleration response spectra and their PGA are notably higher, and thus on the safety site, than those obtained following the Italian code approach for seismic resistant buildings. These results confirm that a scenario-based methodology can better capture the shaking effect in near-field conditions, avoiding possibly unconservative underestimations of the seismic actions and in view of a more robust performance-based approach used by engineers for either new design and/or assessment/retrofit purposes of the built environment.
      616  139
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Deciphering past earthquakes from the probabilistic modeling of paleoseismic records – the Paleoseismic EArthquake CHronologies code (PEACH, version 1)

    A key challenge in paleoseismology is constraining the timing and occurrence of past earthquakes to create an earthquake history along faults that can be used for testing or building fault-based seismic hazard assessments. We present a new methodological approach and accompanying code (Paleoseismic EArthquake CHronologies, PEACH) to meet this challenge. By using the integration of multi-site paleoseismic records through probabilistic modeling of the event times and an unconditioned correlation, PEACH improves the objectivity of constraining paleoearthquake chronologies along faults, including highly populated records and poorly dated events. Our approach reduces uncertainties in event times and allows increased resolution of the trench records. By extension, the approach can potentially reduce the uncertainties in the estimation of parameters for seismic hazard assessment such as earthquake recurrence times and coefficient of variation. We test and discuss this methodology in two well-studied cases: the Paganica Fault in Italy and the Wasatch Fault in the United States.
      42  98
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    An updated area-source seismogenic model (MA4) for seismic hazard of Italy

    A new probabilistic seismic hazard model, called Modello di Pericolosità Sismica 2019 (MPS19), has been recently proposed for the Italian territory, as a result of the efforts of a large national scientific community. This model is based on 11 groups of earthquake rupture forecast inputs and, particularly, on 5 area-source seismogenic models, including the so-called MA4 model. Data-driven procedures were followed in MA4 to evaluate seismogenic parameters of each area source, such as upper and lower seismogenic depths, hypocentral-depth distributions, and nodal planes. In a few cases, expert judgement or ad hoc assumptions were necessary due to the scarcity of data. MA4 consists of 20 seismicity models that consider epistemic uncertainty in the estimations of the completeness periods of the earthquake catalogue, of maximum magnitude values and of seismicity rates. In particular, five approaches were adopted to calculate the rates, in the form of the truncated Gutenberg–Richter frequency–magnitude distribution. The first approach estimated seismicity rates using earthquakes located in each area source, while the other approaches firstly calculated the seismicity rates for groups of areas considered tectonically homogeneous and successively partitioned in different ways the values to the area forming each group. The results obtained in terms of seismic hazard estimates highlight that the uncertainty explored by the 20 seismicity models of MA4 is at least of the same order of magnitude as the uncertainty due to alternative ground motion models.
      435  69
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Which Fault Threatens Me Most? Bridging the Gap Between Geologic Data-Providers and Seismic Risk Practitioners

    The aim of the Fault2SHA European Seismological Commission Working Group Central Apennines laboratory is to enhance the use of geological data in fault-based seismic hazard and risk assessment and to promote synergies between data providers (earthquake geologists), end-users and decision-makers. Here we use the Fault2SHA Central Apennines Database where geologic data are provided in the form of characterized fault traces, grouped into faults and main faults, with individual slip rate estimates. The proposed methodology first derives slip rate profiles for each main fault. Main faults are then divided into distinct sections of length comparable to the seismogenic depth to allow consideration of variable slip rates and the exploration of multi-fault ruptures in the computations. The methodology further allows exploration of epistemic uncertainties documented in the database (e.g., main fault definition, slip rates) as well as additional parameters required to characterize the seismogenic potential of fault sources (e.g., 3D fault geometries). To illustrate the power of the methodology, in this paper we consider only one branch of the uncertainties affecting each step of the computation procedure. The resulting hazard and typological risk maps allow both data providers and end-users 1) to visualize the faults that threaten specific localities the most, 2) to appreciate the density of observations used for the computation of slip rate profiles, and 3) interrogate the degree of confidence on the fault parameters documented in the database (activity and location certainty). Finally, closing the loop, the methodology highlights priorities for future geological investigations in terms of where improvements in the density of data within the database would lead to the greatest decreases in epistemic uncertainties in the hazard and risk calculations. Key to this new generation of fault-based seismic hazard and risk methodology are the user-friendly open source codes provided with this publication, documenting, step-by-step, the link between the geological database and the relative contribution of each section to seismic hazard and risk at specific localities
      131  51
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Earthquake Rupture Forecasts for the MPS19 Seismic Hazard Model of Italy

    In recent years, new approaches for developing earthquake rupture forecasts (ERFs) have been proposed to be used as an input for probabilistic seismic hazard assessment (PSHA). Zone- based approaches with seismicity rates derived from earthquake catalogs are commonly used in many countries as the standard for national seismic hazard models. In Italy, a single zone- based ERF is currently the basis for the official seismic hazard model. In this contribution, we present eleven new ERFs, including five zone-based, two smoothed seismicity-based, two fault- based, and two geodetic-based, used for a new PSH model in Italy. The ERFs were tested against observed seismicity and were subject to an elicitation procedure by a panel of PSHA experts to verify the scientific robustness and consistency of the forecasts with respect to the observations. Tests and elicitation were finalized to weight the ERFs. The results show a good response to the new inputs to observed seismicity in the last few centuries. The entire approach was a first attempt to build a community-based set of ERFs for an Italian PSHA model. The project involved a large number of seismic hazard practitioners, with their knowledge and experience, and the development of different models to capture and explore a large range of epistemic uncertainties in building ERFs, and represents an important step forward for the new national seismic hazard model.
      3092  170
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Sequence-based hazard analysis for Italy considering a grid seismic source model

    Earthquakes are usually clustered in both time and space and, within each cluster, the event ofhighest magnitude is conventionally identified as the mainshock, while the foreshocks and theaftershocks are the events that occur before and after it, respectively. Mainshocks are theearthquakes considered in the classical formulation of the probabilistic seismic hazard analysis(PSHA), where the contribution of foreshocks and aftershocks is usually neglected. In fact, ithas been shown that it is possible to rigorously, within the hypotheses of the model, account forthe effect of mainshock-aftershocks sequences by means of the sequence-based PSHA (i.e.,SPSHA). SPSHA extends the usability of the homogeneous Poisson process, adopted formainshocks within PSHA, to also describe the occurrence of clusters maintaining the same inputdata of PSHA; i.e., the seismic rates derived by a declustered catalog. The aftershocks’occurrences are accounted for by means of conditional non-homogeneous Poisson processesbased on the modified Omori law. The seismic source model for Italy has been recentlyinvestigated, and the objective of the study herein presented is to include and evaluate the effectof aftershocks, by means of SPSHA, based on a new grid model. In the paper, the results of PSHAand SPSHA are compared, considering the spectral and return periods that are of typical interestfor earthquake engineering. Finally, a comparison with the SPSHA map based on a well-established source model for Italy is also provided.
      228  225