Amoroso, Sara
Preferred name
Amoroso, Sara
Staff
staff
ORCID
Researcher ID
L-7179-2014
68 results
Filters
Settings
The search returned 68 results
Now showing 1 - 10 of 68
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Preface
(2024-10-30); ; ; ; With this volume, Annals of Geophysics proudly presents a special issue dedicated to celebrating the anniversary of Istituto Nazionale di Geofisica e Vulcanologia (INGV) for its "25 years of geosciences for society". This collection of scientific articles is authored by dedicated researchers whose active participation and collaboration have brought prestige to both INGV and our journal. Although the list of authors is not exhaustive among the numerous past and present INGV collaborators, it offers an exciting and insightful journey through the fields of seismology, volcanology, and environmental science. This volume is divided into three parts: the first is dedicated to topics more closely related to seismology, the second to volcanology, and the last part is focused on environmental issues, including both review articles and articles addressing specific problems. There are contributions dedicated to the study of tsunamis and multi-hazard analyses, as well as articles on the history of globally significant infrastructure and sections focused on the most widely used seismological models.6 73 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Environmental effects and seismogenic source characterization of the December 2020 earthquake sequence near Petrinja, Croatia
(2022-03-26); ; ; ; On 29 December 2020, a shallow earthquake of magnitude Mw 6.4 struck northern Croatia, near the town of Petrinja, more than 24 hours after a strong foreshock (Ml 5). We formed a reconnaissance team of European geologists and engineers, from Croatia, Slovenia, France, Italy and Greece, rapidly deployed in the field to map the evidence of coseismic environmental effects. In the epicentral area, we recognized surface deformation, such as tectonic breaks along the earthquake source at the surface, liquefaction features (scattered in the fluvial plains of Kupa, Glina and Sava rivers), and slope failures, both caused by strong motion. Thanks to this concerted, collective and meticulous work, we were able to document and map a clear and unambiguous coseismic surface rupture associated with the main shock. The surface rupture appears discontinuous, consisting of multi-kilometer en échelon right stepping sections, along a NW-SE striking fault that we call the Petrinja-Pokupsko Fault (PPKF). The observed deformation features, in terms of kinematics and trace alignments, are consistent with slip on a right lateral fault, in agreement with the focal solution of the main shock. We found mole tracks, displacement on faults affecting natural features (e. g. drainage channels), scarplets, and more frequently breaks of anthropogenic markers (roads, fences). The surface rupture is observed over a length of ∼13 km from end-to-end, with a maximum displacement of 38 cm, and an average displacement of ∼10 cm. Moreover, the liquefaction extends over an area of nearly 600 km² around the epicenter. Typology of liquefaction features include sand blows, lateral spreading phenomenon along the road and river embankments, as well as sand ejecta of different grain size and matrix. Development of large and long fissures along the fluvial landforms, current or ancient, with massive ejections of sediments is pervasive. These features are sometimes accompanied by small horizontal displacements. Finally, the environmental effects of the earthquake appear to be reasonably consistent with the usual scaling relationships, in particular the surface faulting. This rupture of the ground occurred on or near traces of a fault that shows clear evidence of Quaternary activity. Further and detailed studies will be carried out to characterize this source and related faults in terms of future large earthquakes potential, for their integration into seismic hazard models.565 419 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The first Italian blast-induced liquefaction test (Mirabello, Emilia-Romagna, Italy): description of the experiment and preliminary results
Soil liquefaction can result in significant settlement and reduction of load-bearing capacity. Moreover, the generation of pore pressure during an earthquake and its post-seismic dissipation can generate permanent deformations and settlements. The quantitative evaluation of post-liquefaction settlements is of extreme importance for engineering purposes, i.e. for earthquake-resistant design of new buildings and safety evaluation of existing ones. Quantifying the extent of these phenomena is, however, rather difficult. Uncertainties arise from the stochastic nature of the earthquake loading, from the simplifications of soil models, and from the difficulty in establishing correlations between the pre-earthquake soil state and the post-seismic deformations. Field scale liquefaction tests, under controlled conditions, are therefore important for a correct quantification of these phenomena. Recent experiences (e.g. New Zealand, United States) show that liquefaction can be induced and monitored with field scale blast tests to study the related effects on soil geotechnical properties. Within this framework this paper introduces the preliminary results obtained from a research project on blast-induced liquefaction at field scale. Tests were performed at a trial site located in Mirabello (Ferrara, Italy), a village strongly affected by liquefaction phenomena during the 2012 Emilia Romagna earthquake. Invasive tests, such as piezocone, seismic dilatometer and down-hole tests, and non-invasive tests were carried out before and after the execution of two blast test sequences to study the variation in physical properties of the soils. Pore pressure transducers, settlement profilometers and accelerometers were installed with the objective of measuring, during and after the detonations, the generation and subsequent dissipation of the pore pressure, the vertical deformations, and the blast-induced ground motions respectively. Variations in load distribution on deep foundations due to soil liquefaction were also evaluated on a test micropile instrumented with a strain gauge array. Topographical surveys were carried out to measure ground surface settlements. Laboratory tests and trenches also provided increased understanding of the site characteristics.1606 185 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Gruppo operativo EMERSITO- evento sismico ISCHIA 2017: Rapporto n.1 23/08/2017
Il gruppo INGV Emersito è una task force operativa a livello nazionale finalizzata svolgere e coordinare le campagne di monitoraggio per gli effetti di sito a seguito di eventi sismici di forte magnitudo, o che comunque hanno dato luogo a un danneggiamento imputabile anche all’amplificazione del moto sismico in superficie. In occasione della sequenza sismica in corso, iniziata con il terremoto delle ore 20:57 italiane nei pressi dell’Isola di Ischia il 21/08/2017, abbiamo effettuato alcune analisi preliminari sulle registrazioni sismiche delle stazioni della Rete Sismica Nazionale INGV installate sull’isola.260 189 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Combined P- and S-Wave Measurements by Seismic Dilatometer Test (SPDMT): A Case History in Bondeno (Emilia Romagna, Italy)
A new seismic dilatometer (SPDMT) has been developed to combine the measurements of the flat dilatometer (DMT) geotechnical parameters with both P- and S- waves velocities. This new SPDMT is composed of the traditional mechanical DMT and four sensors for measuring the body waves velocities placed above the DMT blade. This SPDMT device is presented here, and the test procedure and the interpretation of P- and S-wave measurements are discussed. Results of the application of this new instrument are reported in a test site located in Bondeno (Emilia Romagna, Italy). Here, challenging water table conditions offer the opportunity to evaluate the advantage of a combined measure of the two propagation velocities, together with DMT geotechnical parameters, with the same apparatus for the porosity evaluation and a more calibrated liquefaction assessment.49 190 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Comparative Study of CPTU and SDMT in Liquefaction-Prone Silty Sands with Ground Improvement
Following the 2012 Emilia-Romagna seismic sequence, widespread liquefaction of silty sands was observed, providing the opportunity to enhance our knowledge of the influence of fines content on seismic hazard and mitigation works. This paper presents the results of a thorough geotechnical investigation performed in connection with full-scale controlled blast tests in Bondeno, Italy, a small village that suffered liquefaction in 2012. Piezocone (CPTU) and seismic dilatometer (SDMT) tests were performed in natural and improved soils after rammed aggregate pier (RAP) treatment to a depth of 9.5 m to provide accurate soil characterization, evaluate liquefaction, and verify the effectiveness of the ground improvement. The combined use of piezocone (CPTU) and flat dilatometer (DMT) data provided reliable estimates of the overconsolidation ratio and at-rest earth pressure coefficient and highlighted the soil improvement in silty sands between 4 and 9 m in depth. Shear-wave velocity measurements showed a low sensitivity to RAP installation. The treatment effectiveness was also confirmed by the use of the simplified procedures for liquefaction assessment, underlining the important influence of the adopted fines profile and by the blast-induced liquefaction. CPTU and DMT parameters remained approximately unchanged between the piers after the detonation.140 169 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Results from shallow geophysical investigations in the northwestern sector of the island of Malta
We performed geophysical investigations in the northwestern sector of the island of Malta to reconstruct velocity-depth models and provide shear-wave velocity profiles. We have chosen two sites, one located in Rabat (Malta) and another in the Golden Bay area. We used both active (seismic and electrical 2D-tomography, Multichanel Analysis of Surface Waves – MASW) and passive (2D arrays and single-station measurements using ambient noise) geophysical methods. Consistently with previous studies performed in this part of Malta, we have found that both sites are characterised by site resonance in the frequency range 1-2 Hz as an effect of the local lithostratigraphic succession that shows an impedance contrast at about 60-90 m depth. This resonance effect can have important implications on both seismic hazard as well as seismic risk evaluation of the region since the amplified frequency range coincides with the resonance frequencies typical of 5–10 storey buildings which are very diffuse in the Maltese Islands, especially after intense recent urbanization.1246 10 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Liquefaction source layer for sand blows induced by the 2016 megathrust earthquake (Mw 7.8) in Ecuador (Boca de Briceño)
Numerous sand boils were generated in the alluvial plain at the mouth of the Rio Brice˜no valley (Ecuador) during the Mw 7.8 earthquake of April 2016. The area is characterized by a series of raised marine terraces formed as a consequence of the rapid tectonic coastal uplift during the Quaternary. Boreholes and geotechnical investigations were carried during post-earthquake surveys and for the purpose of mitigating the liquefaction effects. Five lithological units were identified at a site of embankment, which represented continental-marine and transitional sedimentation since the Last Glacial Maximum. A comprehensive study of texture and petrographic composition of sand boils has been performed and compared with sandy silts and silty sands of the buried sedimentary sequence in order to identify the source levels for liquefaction. The petrographic components, in particular the low content of bioclasts and carbonate fragments of the sand boils, allow to pinpoint a source layer made up of fine-grained silty sands located between 2 and 4.5 m depth (Unit 2) whereas the deeper marine sands, richer in bioclasts, were not involved. The results support the idea that earthquake-induced liquefaction phenomena are not restricted to clean sands and well-sorted deposits, but may affect sand layers with significant amount of nonplastic silt.202 62 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Quaternary geology and paleoseismology in the Fucino and L’Aquila basins
This 2 days-long field trip aims at exploring field evidence of active tectonics, paleoseismology and Quaternary geology in the Fucino and L’Aquila intermountain basins and adjacent areas, within the inner sector of Central Apennines, characterized by extensional tectonics since at least 3 Ma. Each basin is the result of repeated strong earthquakes over a geological time interval, where the 1915 and 2009 earthquakes are only the latest seismic events recorded respectively in the Fucino and L’Aquila areas. Paleoseismic investigations have found clear evidence of several past earthquakes in the Late Quaternary to Holocene period. Active tectonics has strongly imprinted also the long-term landscape evolution, as clearly shown by numerous geomorphic and stratigraphic features. Due to the very rich local historical and seismological database, and to the extensive Quaternary tectonics and earthquake geology research conducted in the last decades by several Italian and international teams, the area visited by this field trip is today one of the best studied paleoseismological field laboratories in the world. The Fucino and L’Aquila basins preserve excellent exposures of earthquake environmental effects (mainly surface faulting), their cumulative effect on the landscape, and their interaction with the urban history and environment. This is therefore a key region for understanding the role played by earthquake environmental effects in the Quaternary evolution of actively deforming regions, also as a major contribution to seismic risk mitigation strategies.435 118 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The liquefaction evidences following the 2020 Petrinja earthquake (Pannonian basin, Croatia): A full database and insights for phenomena comprehension
(Earthquake Engineering Research Institute:499 14th Street, Suite 320:Oakland, CA 94612:(510)451-0905, EMAIL: eeri@eeri.org, INTERNET: http://www.eeri.org, Fax: (510)451-5411, 2025-03-25); ; ;Valvano, Christian ;Wacha, LaraThe 2020 MW 6.4 Petrinja (Croatia) earthquake induced extensive and diversified liquefaction and lateral spreading phenomena within ’ 20 km radius from the epicenter. A detailed investigation from field and Unmanned Aerial Vehicle (UAV) surveys was carried out by a European researcher team (EUTeam) in the months following the mainshock. This work focuses on 61 surveyed sites: field observations were coupled with laboratory tests for soil classification and sediment composition. The adopted procedure provides an in-depth geological and geotechnical characterization of the liquefied sites in the Petrinja region. The liquefaction evidences are mainly associated to alluvial plain environments, in particular to meander paleochannels, and the ejected material is predominantly siliciclastic, made up of very rounded quartz-rich lithics. Few sites are dominated by angular carbonate rock fragments, related to liquefaction in cataclastic deposits along tectonic fractures. The ejected sediment includes a wide range of grain-size from silt to gravel. The peculiar presence of gravel in the liquefied deposits (up to 28% in some samples) confirms the need of expanding the grain-size boundaries for liquefiable coarse-grained gravelly soils. The information gathered from the postearthquake surveys and from the sedimentological and geotechnical analysis for each studied site were compiled in organized data sheets, providing a striking instrument for in-depth earthquake studies, both for geological and geotechnical engineering purposes. The format defined for the data sheet can be functional and applicable also in liquefaction studies from different geological and depositional settings.7
