Skip to main content
The search returned 93 results
Now showing 1 - 10 of 93
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Broadband Near-Fault Ground-Motion Simulations Using a Modified f-k Method in Central Italy

    ([Stanford Calif.]: Seismological Society of America, [1911-, 2026) ; ; ;
    Cuius, Arianna
    ;
    In this study, we simulate ground motions for three major earthquakes that occurred in Central Italy: the 2009 M w 6.3 L'Aquila earthquake and the two largest events of the 2016 Amatrice-Visso-Norcia sequence, the M w 6.2 Amatrice and M w 6.5 Norcia earthquakes. These events caused widespread damage, intense ground shaking, and casualties, making them key cases for evaluating and improving ground-motion modeling techniques, especially given the high-quality recordings available from near-source stations. We use the frequency-wavenumber (f-k) method to generate broadband synthetic ground motions ≤ 7 Hz. This approach balances computational efficiency with physical accuracy, making it well suited for regional-scale applications. Green's functions are computed from the Central Italian Apennines 1D layered velocity model (Herrmann et al., 2011), and kinematic rupture models are generated using the methodology of Graves and Pitarka (2016; hereafter, GP16), implemented into the f-k framework. Site response is incorporated using frequency-dependent nonlinear amplification factors (Borcherdt, 1994). We evaluate the simulations through a detailed comparison with observed ground motions using RotD50 spectral acceleration and a goodness-of-fit analysis. In addition to simulations at recorded stations, we compute ground motions over a dense grid of virtual sites to assess spatial variability and source-related effects such as rupture directivity and regional amplification. Results are benchmarked against predictions from the empirical ground-motion model ITA18 (Lanzano et al., 2019). Our findings demonstrate that the f-k method can reproduce key features of observed ground motion with good agreement, capturing both near-fault effects and broader regional trends. This study demonstrates that the f-k approach offers a computationally efficient and physically robust alternative for deterministic groundmotion simulation, bridging empirical models and 3D simulations for practical use in hazard scenarios and urgent computing workflows. KEY POINTS • The frequency-wavenumber (f-k) method with 1D models efficiently simulates broadband ground motion ≤7 Hz. • Hybrid rupture models capture rupture directivity effects observed in the L'Aquila and Amatrice events. • Simulations show satisfactory agreement with recorded data and enable rapid regional seismic hazard assessment.
      8
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Modeling the 2023 Türkiye Earthquakes and Strain Accumulation Along the East Anatolian Fault Zone: Insights from InSAR, GNSS, and Small-Magnitude Seismicity, with Implications for the Seismic Potential at Rupture Terminations

    (Basel : Molecular Diversity Preservation International, 2025-07-02) ; ; ; ;
    The 6 February 2023 MW 7.8 and MW 7.6 earthquakes in southeastern Türkiye ruptured more than 400 km of the East Anatolian Fault Zone (EAFZ), producing one of the most destructive seismic sequences in recent history. Here, we integrate InSAR data, a new GNSS velocity field, and small-magnitude earthquakes to investigate the coseismic deformation, rupture geometry, and interseismic strain accumulation along the EAFZ. Using elastic dislocation modeling with a variable-strike, multi-segment fault geometry, we constrain the slip distribution of the mainshocks, showing improved fits to the surface displacement compared to the planar fault model. The MW 7.8 event ruptured a number of fault segments over ~300 km, while the MW 7.6 event activated a more localized fault system with a peak slip exceeding 15 m. We also model two moderate events (MW 5.6 in 2020 and MW 5.3 in 2022) along the southwestern part of the Pütürge segment—an area not ruptured during the 2020 or 2023 sequences. GNSS-derived strain-rate and locking depth estimates reveal strong interseismic coupling and significant strain accumulation in this region, suggesting the potential for a future large earthquake (MW 6.6–7.1). Similarly, the Hatay region, at the southwestern termination of the 2023 rupture, shows a persistent strain accumulation and complex fault interactions involving the Dead Sea Fault and the Cyprus Arc. Our results demonstrate the importance of combining remote sensing and geodetic data to constrain fault kinematics, evaluate rupture segmentation, and assess the seismic hazard in tectonically active regions. Targeted monitoring at rupture terminations—such as the Pütürge and Hatay sectors—may be crucial for anticipating future large-magnitude earthquakes.
      8  26
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Studying Past Earthquakes with Modern Techniques: Ground-Motion Simulations for the 11 January 1693 Noto Earthquake in Italy

    The 1693 Noto earthquake, which struck on 11 January, is one of the Italy’s largest and most devastating earthquakes. According to the Italian Parametric Earthquake Catalogue, it reached a maximum intensity of 11 on the Mercalli–Cancani–Sieberg scale and had an estimated magnitude of M 7.3. Nevertheless, its precise location and source definition remain subjects to debate due to the complexity of the seismic sequence and lack of geological evidence. A series of potential seismic sources differing in location, dimension, and kinematics have been proposed in the literature based on seismotec- tonic data and interpretations. The goal of this work is to perform a retrospective experiment to verify which of the proposed seismic sources have a better fit with the observed intensity data. To do so, novel simulation techniques are used to study this historical earthquake. We generated ground-motion scenarios for each proposed source model through a stochastic finite-fault simulation approach. Then, the simulated ground-motion parameters were converted to intensities using two different ground- motion intensity conversion equations for Italy. Finally, we compared these converted intensities with the observed intensity data in terms of normalized root mean square errors and converted intensities from ground-motion models. Our results generally show good consistency between converted intensities from the simulated and pre- dicted ground motions, whereas the observed intensities fit better to converted ones from the peak ground velocity rather than peak ground acceleration. Our analysis reveals that the source model reproducing the best of the macroseismic data of the Noto earthquake is the Canicattì–Villasmundo fault system with a magnitude of 7.1.
      11  32
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Impact of the Earthquake Rupture on Ground-Motion Variability of the 24 August 2016 M w 6.2 Amatrice, Italy, Earthquake

    ([Stanford Calif.]: Seismological Society of America, [1911-, 2024-07-26) ; ; ; ;
    The devastating 24 August 2016 M w 6.2 earthquake that struck Amatrice, Italy, marked the beginning of a prolonged seismic sequence dominated by three subsequent M w ≥ 6.0 events in the central Apennines region. The earthquake destroyed Amatrice's historic center, claiming the lives of 299 individuals and causing widespread damage in the neighboring villages. The severity of the ground shaking, with a recorded maximum acceleration of 850 cm= s 2 on the east-west component at the Amatrice station, was far greater than the predicted acceleration based on the Italian ground-motion model (GMM). As pointed out by several investigations, the observed ground-motion amplitude and its spatial variability during the earthquake can be linked to specific rupture characteristics, including slip distribution and rupture directivity effects revealed by the observed data (Tinti et al., 2016; Pischiutta et al., 2021). In this study, we conducted physics-based 3D numerical simulations of ground motion for the Amatrice earthquake for frequencies up to 3 Hz. We employed a series of kinematic rupture models and a well-constrained local 3D velocity model incorporating surface topography. The kinematic rupture realizations were generated using multiscale hybrid and fully stochastic models, following the technique proposed by Graves and Pitarka (2016). We focused on assessing the sensitivity of near-fault ground-motion amplitudes to earthquake rupture characteristics, in particular, the spatial slip pattern. To evaluate the quality of our simulations, we employed goodness-of-fit measurements performed in comparisons of simulated and recorded ground motions. The simulated ground motions compare well with the recorded data and predictions from GMMs for Italy, ITA18 (Lanzano et al., 2019). However, we found that the simulated interevent ground-motion variability (randomness in the source process) of peak ground velocity, σ (PGV) is higher than the constant σ (PGV) predicted by conventional GMMs. Our simulations using several rupture scenarios demonstrate that the near-fault groundmotion amplification pattern is directly related to the slip distribution pattern. KEY POINTS • The near-fault ground-motion amplification pattern is related to the size and distribution of the slip. • The rupture directivity is controlled by location of the rupture initiation relative to the large slip patches. • Peak ground velocity interevent variability is distance dependent and higher at shorter distances than that of constant ground-motion models.
      12
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    COMPARING 1D/3D GROUND MOTION SIMULATIONS FOR EARTHQUAKES IN CENTRAL ITALY

    The seismic activity known as the Amatrice-Visso-Norcia seismic sequence began on August 24th, 2016, with the M6.2 earthquake in Amatrice, Italy. This sequence included eight additional earthquakes with magnitudes above 5.0, which caused significant damage to nearby villages. The largest and most significant event occurred on October 30th, 2016, with a magnitude of 6.5 in Norcia, central Apennines. In this study, we perform physics-based simulations and investigate the ground motion variability for Norcia and Amatrice earthquakes using the Pitarka et al. (2021a) and Akinci et al. (2023) simulation approaches, respectively. We generated broad-band ground-motion acceleration time histories (0-10Hz) for these two earthquakes using frequency-wavenumber Green’s functions (FK approach) and kinematic rupture models generated with the Graves and Pitarka (2016) technique. The FK Green’s functions (GF) were computed using the propagator matrix method of Zhu and Rivera (2002) and a 1D velocity model of Central Italy (CIA) (Hermann et al., 2011). The FK-based broad-band simulation method allows for fast and realistic generation of synthetic time histories, provided that appropriate GF repository and source rupture models are available. Finally, we analyzed the performance of our 1D simulation approach by comparing our synthetic ground motions with those computed with a regional 3D velocity model and the recorded ones. We found that the FK-based simulation approach and the 1D CIA velocity model produce ground motion that compares well with recorded data throughout the region in the modeled frequency range 0-10 Hz. Because this simulation technique is very fast and reliable, it can be used to produce ground motion maps soon after a major earthquake, and in computing scenario-based ground motion for seismic hazard assessment in Central Italy.
      62  183
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Combining Seismotectonic and Catalog-Based 3D Models for Advanced Smoothed Seismicity Computations

    The new generation seismic hazard maps use 3D seismotectonic fault models, which are more consistent with the actual nature of faults, whereas the classical models based on earthquake catalogs only utilize a 2D representation of the seismicity. Although the former provides more reliable information on seismogenic structures, the latter can deliver trustworthy seismicity rates easily. Therefore, it is necessary to combine both the approaches to create a high‐quality seismic hazard assessment model. This study proposes an innovative approach using smoothed seismicity methods that can be advantageous in all contexts with available 3D fault models and high‐quality seismic catalogs. We applied our method on the Adriatic Basal Thrust (ABT) in eastern central Italy—a lithospheric‐scale active contractional structure with a well‐constrained 3D geometric–kinematic reconstruction and a related high‐quality catalog. Our new 3D algorithm was applied to smooth the ABT seismicity on the grid, resulting in a 3D earthquake rate model that also provides rupture parameters such as strike, dip, rake, and seismogenic thickness. Our approach is particularly useful for complex seismotectonic settings, such as in cases of lithospheric shear zones, subduction planes, and overlapping multidepth seismogenic volumes.
      99  274
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Characteristics of strong ground motions and structural damage patterns from the February 6th, 2023 Kahramanmaraş earthquakes, Türkiye

    (2024) ; ;
    Bal, Ihsan E
    ;
    Ertuncay, Deniz
    ;
    Smyrou, Eleni
    On February 6th, 2023, two severe earthquakes struck southeastern Türkiye near the Syrian border. The first earthquake, Mw7.8, occurred at 04:17 local time in the East Anatolian Fault Zone near the city of Gaziantep. The second earthquake, Mw7.5, occurred approximately 9 h later at 13:24 local time near Elbistan County, in Kahramanmaraş province. These seismic events ruptured multiple segments of the East Anatolian Fault Zone (EAFZ), with rupture lengths exceeding 300 km, and deformation exceeding 5 m on both sides of the faults. In this study, we aim to analyze characteristics of the strong ground motion induced by the mainshocks, focusing on ground motion intensity measures such as the peak ground acceleration (PGA), the peak ground velocity (PGV), and the pseudo-acceleration response spectra (PSA). The first earthquake produced extremely high PGA values in both horizontal (> 2 g) and vertical (> 1 g) components. At near field distances, large PGVs are measured (> 180 cm/s) with more than 30 impulsive motions which may indicate source-related effects. Large spectral demands are also recorded for both earthquakes, partially underestimated by Ground Motion Models (GMMs), especially in the near-field. Specifically, we compare the PSA for horizontal directions with the design spectra provided by both the new and previous Turkish building codes. We also present building and ground damage observations that provide insights into the observed ground motions in the heavily damaged areas.
      6  78
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Scattering Attenuation Images of the Control of Thrusts and Fluid Overpressure on the 2016–2017 Central Italy Seismic Sequence

    Deep fluid circulation likely triggered the large extensional events of the 2016–2017 Central Italy seismic sequence. Nevertheless, the connection between fault mechanisms, main crustal-scale thrusts, and the circulation and interaction of fluids with tectonic structures controlling the sequence is still debated. Here, we show that the 3D temporal and spatial mapping of peak delays, proxy of scattering attenuation, detects thrusts and sedimentary structures and their control on fluid overpressure and release. After the mainshocks, scattering attenuation drastically increases across the hanging wall of the Monti Sibillini and Acquasanta thrusts, revealing fracturing and fluid migration. Before the sequence, low-scattering volumes within Triassic formations highlight regions of fluid overpressure, which enhances rock compaction. Our results highlight the control of thrusts and paleogeography on the sequence and hint at the monitoring potential of the technique for the seismic hazard assessment of the Central Apennines and other tectonic regions.
      136  109
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A site-specific earthquake ground response analysis using a fault-based approach and nonlinear modeling: the Case Pente site (Sulmona, Italy)

    In this paper we present the ground response analyses (GRA) of a site where an industrial facility is planned. Because of its location on an active normal fault system known as a relevant seismic gap, the Mt. Morrone Fault system (MMF), and at the edge of a basin filled with slow velocity continental deposits, a inter-disciplinary and non-standard approach has been applied to assess the seismic input of the dynamic numerical analyses. It includes geological, seismological, geotechnical and engineering contributions. Two fault scenarios, MMF1 and MMF2, were considered and scenario-based (SSHA) and probabilistic (time-dependent, TD, and time-independent, TI) seismic hazard (PSHA) analyses were implemented. Comparison among the spectra corresponding to the 90th percentile of the SSHA statistical distribution and the PSHA average ones, shows that the MMF2 has values similar to the TD model. The SSHA 90th percentile distribution was selected as target spectra to retrieve the seismic input for GRA. Nonlinear numerical simulations of seismic wave propagation were implemented to derive surface ground motion parameters. GRA acceleration response spectra and their PGA are notably higher, and thus on the safety site, than those obtained following the Italian code approach for seismic resistant buildings. These results confirm that a scenario-based methodology can better capture the shaking effect in near-field conditions, avoiding possibly unconservative underestimations of the seismic actions and in view of a more robust performance-based approach used by engineers for either new design and/or assessment/retrofit purposes of the built environment.
      616  139
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Peculiar characteristics of ground motions in Southern Italy: Insights from global and regional ground motion models

    We investigate peculiar characteristics of ground motions in Southern Italy (e.g. apparent fast anelastic attenuation and trends of event terms at different periods) using a comprehensive dataset of earthquake recordings between 1969 and 2020. By doing so, we gained insights into the relative performance of eight selected region-specific, global, and global with regional adjustment ground motion models (GMMs). Our analysis is performed using a preliminary dataset (i.e. including all ground motions recorded in the area for the selected analysis period) and an independent dataset (i.e. comprising data not used to develop the models). We analyze total residuals, event terms, within-even residuals, and residuals standardized by model standard deviations (i.e. epsilon). The latter is performed to obtain a robust comparison of GMMs with different standard deviation types and levels. These approaches are employed to ground motion characterization studies for the first time in this region. Our results show that in Southern Italy, there is an apparent anelastic attenuation of the ground motion faster than in other seismic districts. Overall, regional models capture this feature better than global models. Regional adjustments to global models better capture the observed anelastic attenuation at large distances. Using the standardized residuals analysis, we observe that all selected GMMs systematically underestimate the observed ground motion for relatively high ground motion levels and its variability at any intensity levels in the study region. These outcomes may help improving future ground motion models and related engineering applications involving such models in performance-based frameworks.
      99  300