Skip to main content
The search returned 6 results
Now showing 1 - 6 of 6
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Studying Past Earthquakes with Modern Techniques: Ground-Motion Simulations for the 11 January 1693 Noto Earthquake in Italy

    The 1693 Noto earthquake, which struck on 11 January, is one of the Italy’s largest and most devastating earthquakes. According to the Italian Parametric Earthquake Catalogue, it reached a maximum intensity of 11 on the Mercalli–Cancani–Sieberg scale and had an estimated magnitude of M 7.3. Nevertheless, its precise location and source definition remain subjects to debate due to the complexity of the seismic sequence and lack of geological evidence. A series of potential seismic sources differing in location, dimension, and kinematics have been proposed in the literature based on seismotec- tonic data and interpretations. The goal of this work is to perform a retrospective experiment to verify which of the proposed seismic sources have a better fit with the observed intensity data. To do so, novel simulation techniques are used to study this historical earthquake. We generated ground-motion scenarios for each proposed source model through a stochastic finite-fault simulation approach. Then, the simulated ground-motion parameters were converted to intensities using two different ground- motion intensity conversion equations for Italy. Finally, we compared these converted intensities with the observed intensity data in terms of normalized root mean square errors and converted intensities from ground-motion models. Our results generally show good consistency between converted intensities from the simulated and pre- dicted ground motions, whereas the observed intensities fit better to converted ones from the peak ground velocity rather than peak ground acceleration. Our analysis reveals that the source model reproducing the best of the macroseismic data of the Noto earthquake is the Canicattì–Villasmundo fault system with a magnitude of 7.1.
      11  32
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    INGe: Intensity-ground motion dataset for Italy

    In this paper we present an updated and homogeneous earthquake dataset for Italy compiled by joining the intensities available in the Italian Macroseismic Database DBMI15 and the peak ground motion (PGM) parameters present in the Engineering Strong-Motion (ESM) accelerometric data bank. The database has been compiled through an extensive procedure of evaluation and revision based on two main steps: 1) the selection of the earthquakes in DBMI15 with homogeneous macroseismic intensities in terms of data sources and 2) the extraction of all the localities reporting intensity data which are located within 3 km from the accelerograph stations that recorded the data. The final dataset includes 519 intensity-PGM data pairs from 65 earthquakes and 227 stations in the time span 1972–2016. The reported intensities are expressed either in the Mercalli-Cancani-Sieberg (MCS) or the European macroseismic (EMS-98) scales. The events are characterized by magnitudes in the range 4.1–6.8 and depths in the range 0–55 km. Here, we illustrate the data collection and the properties of the database in terms of recording, event and station distributions as well as macroseismic intensity points. Furthermore, we discuss the most relevant features of engineering interest showing several statistics with reference to the most significant metadata (such as moment magnitude, several distance metrics, style of faulting etc). The dataset is expected to be useful for benchmarking existing and for developing new ground motion intensity conversion equations offering a common basis, and sparing the time and effort required for assembling to the interested researchers. The dataset is available at https://zenodo.org/record/4623732#.YNX-AZMzbdc.
      259  148
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The ShakeMap Atlas of Historical Earthquakes in Italy: Configuration and Validation

    Italy has a long tradition of studies on the seismic history of the country and the neighboring areas. Several archives and databases dealing with historical earthquake data—primarily intensity data points—have been published and are constantly updated. Macroseismic fields of significant events are of foremost importance in assessing earthquake effects and for the evaluation of seismic hazards. Here, we adopt the U.S. Geological Survey (USGS)‐ShakeMap software to calculate the maps of strong ground shaking (shakemaps) of 79 historical earthquakes with magnitude ≥6 that have occurred in Italy between 1117 and 1968 C.E. We use the macroseismic data published in the Italian Macroseismic Database (DBMI15). The shakemaps have been determined using two different configurations. The first adopts the virtual intensity prediction equations approach (VIPE; i.e., a combination of ground‐motion models [GMMs] and ground‐motion intensity conversion equations [GMICEs]; Bindi, Pacor, et al., 2011; Oliveti et al., 2022b). The second exploits the intensity prediction equations (IPE; Pasolini, Albarello, et al., 2008; Lolli et al., 2019). The VIPE configuration has been found to provide more accurate results after appraisal through a cross‐validation analysis and has been applied for the generation of the ShakeMap Atlas. The resulting maps are published in the Istituto Nazionale di Geofisica e Vulcanologia (INGV) ShakeMap (see Data and Resources; Oliveti et al., 2023), and in the Italian Archive of Historical Earthquake Data (ASMI; see Data and Resources; Rovida et al., 2017) platforms.
      342  239
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    New reversible relationships between ground motion parameters and macroseismic intensity for Italy and their application in ShakeMap

    We derived new, reversible relationships between macroseismic intensity (I), expressed in either the European Macroseismic (EMS-98) or the Mercalli–Cancani–Sieberg (MCS) scales and peak ground acceleration (PGA), peak ground velocity (PGV) and the spectral acceleration (SA) at 0.3, 1.0 and 3.0 s [SA(0.3), SA(1.0) and SA(3.0)] for Italy. We adopted the orthogonal distance regression technique to fit a quadratic function. This research aims to improve ground motion and intensity estimates for earthquake hazard applications, and for the calculation of shakemaps in Italy. To this end, the recently published INGe data set was used (https: //doi.org/10.13127/inge.2). The new relations are: I = 3.01 ± 0.12 + 0.86 ± 0.04 log2 PGA,σ= 0.30,σPGA = 0.25,σI = 0.16 I = 4.31 ± 0.15 + 1.99 ± 0.18 log PGV + 0.58 ± 0.18 log2 PGV,σ= 0.34,σPGV = 0.31,σI = 0.15 I = 2.77 ± 0.15 + 0.68 ± 0.03 log2 SA(0.3),σ= 0.31,σSA(0.3) = 0.28,σI = 0.14 I = 3.00 ± 0.28 + 0.91 ± 0.55 log SA(1.0) + 0.51 ± 0.20 log2 SA(1.0),σ= 0.40,σSA(1.0) = 0.38,σI = 0.14 I = 4.04 ± 0.20 + 1.63 ± 0.19 log SA(3.0) + 0.66 ± 0.20 log2 SA(3.0),σ= 0.38,σSA(3.0) = 0.35,σI = 0.14 where PGA and SAs are expressed in cm s−2 and PGV is expressed in cm s−1. Tests performed to assess the robustness and the accuracy of the results demonstrate that adoption of quadratic relationships for this regression problem is a suitable choice within the range of values of the available data set. Comparison with similar published regressions for Italy evidences that the proposed relations provide statistically significant improved fits to the data. The new relations are also tested by inserting them in the ShakeMap system of the Italian configuration evidencing a significant improvement when compared to those implemented.
      145  94
  • Some of the metrics are blocked by your 
    Item type:Product, Access status: Open Access ,
      33  104
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Masked graph neural network for rapid ground motion prediction in Italy

    ([Montréal]: McGill University Library, [2022]-, 2025-09-15)
    Trappolini, Danele
    ;
    ; ; ;
    This study presents an updated version of TISER-GCN, a graph neural network (GCN) designed to predict maximum intensity measurements (IMs) from 10-second seismic waveforms starting at the earthquake origin time, without prior knowledge of location, distance, and magnitude. The improved model was applied to nearly 600 seismic stations from the INSTANCE benchmark dataset, significantly expanding the original TISER-GCN setup, which was limited to 39 stations in a smaller area of central Italy. Input data consist of three-component waveforms selected to ensure high quality and minimize saturation. Results show that masking stations where the P-wave arrives within the first 10 seconds , combined with the integration of additional information, reduces the mean squared error (MSE) by up to 6% for peak ground acceleration (PGA) and 5.5% for peak ground velocity (PGV), compared to the unmasked baseline. Moreover, the proposed approach yields near-zero median residuals across all IMs, mitigating the systematic underestimation observed when using a ground motion model specifically developed for Italy. These findings indicate that the model provides accurate predictions of ground motions, comparable to those obtained with the original TISER-GCN, which, however, requires a fixed seismic network geometry.
      8  36