Mancini, Marco
Preferred name
Mancini, Marco
Main Affiliation
24 results
Filters
Settings
The search returned 24 results
Now showing 1 - 10 of 24
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Geophysical and geochemical multi-method investigations for reconstructing subsurfaces, alluvial sedimentology, and structural geology (Tiber valley, Rome)
Geophysical and geochemical methods were applied to detect the subsurface setting of an Upper Pleistocene-Holocene fluvial incised-valley where a travertine body intercalates between alluvial deposits of the Tiber river (central Italy), at Prima Porta (close to Rome). This study allowed us to provide more information regarding the local stratigraphic architecture and structural features, as a reference analogue to similar settings: i.e., hard (stiff) lithic travertines buried below fine and loose alluvial plain covers. Two Electrical Resistivity Tomography (ERT) profiles, interpreted and calibrated using previously collected litho-stratigraphic data from a borehole, identified a massive body, with a relatively high resistivity that correlates with the 21 travertine deposit of Prima Porta. In addition to ERT, ambient noise measurements, processed with the HVSR technique and 2D array, and seismic refraction tomography were carried out; HVSR data were highly consistent with ERT results and allowed to discriminate between the travertine body and the silty-sand channels and overbank deposits, which were attributed to the Tiber river’s evolution during Upper Pleistocene-Holocene. Finally, the presence of cracks/fractures could be inferred, as suggested by slight polarisation effects recorded in the HVSR results and soil-gas anomalies.46 640 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Seismic microzonation in a complex volcano-tectonic setting: the case of northern and western Ischia Island (southern Italy)
On August 21, 2017, the volcanic island of Ischia was struck by a Mw 3.9 (http://cnt.rm.ingv.it/event/16796811) earthquake which caused two victims and heavy damages on wide portions of the Casamicciola Terme, Lacco Ameno and Forio municipalities. Following the Decree 1/2018 of the Government Commission for the reconstruction of damaged areas of Ischia Island, a Grade 3 Seismic Microzonation study was committed by each municipality to private consultants, who were scientifically supported by a multidisciplinary team of geologists, geophysicists and geotechnical engineers from CNR, INGV and University of Naples “Federico II”. The existing data from previous geological and geotechnical investigations were integrated with the results of new geo-lithological surveys and geophysical measurements (HVSR, MASW, Down hole tests) carried out by the consultants. The whole amount of data was quality checked, homogenized and collected in a SQLite/SpatiaLite geodatabase using a QGIS open source software by the support team. A geo-lithological map of northern and western sides of the island was then produced, and the results of routine geophysical tests were coupled with those of seismic 2D ambient vibration arrays, to obtain shear wave velocity profiles (several hundreds of meters deep) down to the seismic bedrock, made of lithic tuffs and lavas, and to define its buried morphology. This in turn enabled to draw a map of seismically homogeneous microzones of the entire study area. Cyclic torsional shear tests were carried out on 10 undisturbed soil samples, mainly taken from epiclastic cover deposits, to characterize their non-linear behavior to be adopted for seismic response analyses. These latter were carried out along 1D profiles characterizing each microzone and along selected 2D cross sections running from the Mount Epomeo to the coast. The dynamic analyses allowed to detect and map areas characterized by variable amplification factors, of spectral accelerations throughout different ranges of periods (0.1- 0.5s, 04.-0.8s, 0.7-1.1 s). The zones most prone to site amplification are those corresponding to localized graben-like depressions at the toe of Mount Epomeo, such as Maio neighborhood of Casamicciola, where thickened epiclastic covers are entrenched into blocks of uplifted bedrock and where a combination of 1D stratigraphic amplification and 2D reflection and diffraction effects is expected.54 131 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Site Effects of Onna during the 2009 L’Aquila (Central Italy) Seismic Sequence: Constraints on Bedrock Depth and 1D Local Velocity Structure from Aftershock Seismograms
After the 2009 L’AquilaMw 6.1 earthquake, particular attention was paid to the large difference of Mercalli–Cancani–Sieberg (MCS)macroseismic intensity between the nearby villages of Onna (9.5 MCS) and Monticchio (6 MCS). Several authors estimated that in Onna, settled in the Aterno river valley, ground motions were amplified at 2–3 Hz by up to a factor of 5 with respect toMonticchio, settled onmore competent rocks. Although there was a general agreement that the spectral peak was caused by the resonance of the uppermost 40mlayer, a satisfactory fit of the amplitudes was not provided. Here, we apply spectral ratio techniques to 1437 aftershock seismograms (magnitude between 1.8 and 3.9) to compare ground motions within Onna and between Onna and Monticchio. Spectral amplitudes at stations located outside and inside the “red zone” of Onna show that the seismic response was uniform, confirming that vulnerability was crucial for the heavier damage of the ancient part of the village.We have also estimated the empirical transfer function of Onna through the spectral ratios between Onna and Monticchio. Although in a 1D simplification, a model with a further velocity contrast of ∼2 at 200 m of depth produces a more accurate fit of observations. Using the new velocity profile, we modeled the mainshock ground motion at Onna in an equivalent-linear approach. Accelerations are amplified by a factor of 2 and spectral ordinates increase from0:7g at 0.2 s to 1g at 0.5 s, a shaking level that can be destructive for nonductile ancient buildings. This study shows that accurate estimates of empirical transfer functions, even in a simplified 1D approach, provide useful constraints to the deeper velocity structure where measurements are shallow or lacking.259 11 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Central Apennines and its earthquakes: from sedimentology and active tectonics to seismic microzonation studies
The Central Apennines represents a wonderful record of a still active complex stratigraphic and structural history, as testified by recent earthquakes (L'Aquila 2009, Mw 6.1; Amatrice-Norcia 2016, Mw 6.5). Normal faults activity contributed to the formation of tectonic basins that hosted continental deposits, which recorded the long term traces at surface of large earthquakes. Moreover local seismic amplification has been observed, as result of peculiar geological and structural conditions. The field trip will illustrate examples of earthquake-induced effects due to the recent seismic sequence, in relation to the local stratigraphic and structural setting. The main steps of the geological evolution of Central Apennines, from Jurassic up to the Present, will be investigated which will help define contrasting responses to earthquakes between the cover terrains and the seismic bedrock. Evidences for regional uplift and active faulting, which interplayed with Quaternary climatic changes to feed the mountain chain into its present shape will be illustrated. The effects of recent earthquakes on towns and villages will be described considering the contributon of sediments characterization and the results of the recent advanced seismic microzonation studies.125 211 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Temporary dense seismic network during the 2016 Central Italy seismic emergency for microzonation studies
In August 2016, a magnitude 6.0 earthquake struck Central Italy, starting a devastating seismic sequence, aggravated by other two events of magnitude 5.9 and 6.5, respectively. After the first mainshock, four Italian institutions installed a dense temporary network of 50 seismic stations in an area of 260 km2. The network was registered in the International Federation of Digital Seismograph Networks with the code 3A and quoted with a Digital Object Identifier ( https://doi.org/10.13127/SD/ku7Xm12Yy9 ). Raw data were converted into the standard binary miniSEED format, and organized in a structured archive. Then, data quality and completeness were checked, and all the relevant information was used for creating the metadata volumes. Finally, the 99 Gb of continuous seismic data and metadata were uploaded into the INGV node of the European Integrated Data Archive repository. Their use was regulated by a Memorandum of Understanding between the institutions. After an embargo period, the data are now available for many different seismological studies.2864 192 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Mediterranean monitoring and forecasting operational system for Copernicus Marine Service
The MEDiterranean Monitoring and Forecasting Center (Med-MFC) is part of the Copernicus Marine Environment Monitoring Service (CMEMS, http://marine.copernicus.eu/), provided on an operational mode by Mercator Ocean in agreement with the European Commission. Specifically, Med MFC system provides regular and systematic information about the physical state of the ocean and marine ecosystems for the Mediterranean Sea. The Med-MFC service started in May 2015 from the pre-operational system developed during the MyOcean projects, consolidating the understanding of regional Mediterranean Sea dynamics, from currents to biogeochemistry to waves, interfacing with local data collection networks and guaranteeing an efficient link with other Centers in Copernicus network. The Med-MFC products include analyses, 10 days forecasts and reanalysis, describing currents, temperature, salinity, sea level and pelagic biogeochemistry. Waves products will be available in MED-MFC version in 2017. The consortium, composed of INGV (Italy), HCMR (Greece) and OGS (Italy) and coordinated by the Euro-Mediterranean Centre on Climate Change (CMCC, Italy), performs advanced R&D activities and manages the service delivery. The Med-MFC infrastructure consists of 3 Production Units (PU), for Physics, Biogechemistry and Waves, a unique Dissemination Unit (DU) and Archiving Unit (AU) and Backup Units (BU) for all principal components, guaranteeing a resilient configuration of the service and providing and efficient and robust solution for the maintenance of the service and delivery. The Med-MFC includes also an evolution plan, both in terms of research and operational activities, oriented to increase the spatial resolution of products, to start wave products dissemination, to increase temporal extent of the reanalysis products and improving ocean physical modeling for delivering new products. The scientific activities carried out in 2015 concerned some improvements in the physical, biogeochemical and wave components of the system. Regarding the currents, new grid-point EOFs have been implemented in the Med-MFC assimilation system; the climatological CMAP precipitation was replaced by the ECMWF daily precipitation; reanalysis time-series have been increased by one year. Regarding the biogeochemistry, the main scientific achievement is related to the implementation of the carbon system in the Med-MFC biogeochemistry model system already available. The new model is able to reproduce the principal spatial patterns of the carbonate system variables in the Mediterranean Sea. Further, a key result consists of the calibration of the new variables (DIC and alkalinity), which serves to the estimation of the accuracy of the new products to be released in the next version of the system (i.e. pH and pCO2 at surface). Regarding the waves, the system has been validated against in-situ and satellite observations. For example, a very good agreement between model output and in-situ observations has been obtained at offshore and/or well-exposed wave buoys in the Mediterranean Sea.150 123 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Groundwater of Rome
(2016); ; ; ; This paper describes the contents of the new Hydrogeological Map of the City of Rome (1:50,000 scale). The map extends to the entire municipality (1285 km2) and is based on both the most recent scientific studies on the groundwater field and new survey activities carried out in order to fill the data gaps in several areas of the examined territory. The map is the result of a combination of different urban groundwater expertise and Geographic Information System (GIS)-based mapping performed using the most recent available data and has been produced with the intention of furnishing the City of Rome with the most recent and updated information regarding groundwater655 166 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The Mediterranean Decision Support System for Marine Safety dedicated to oil slicks predictions
In the Mediterranean sea the risk from oil spill pollution is high due to the heavy traffic of merchantvessels for transporting oil and gas, especially after the recent enlargement of the Suez canal and to theincreasing coastal and offshore installations related to the oil industry in general. The basic response tomajor oil spills includes different measures and equipment. However, in order to strengthen the mar-itime safety related to oil spill pollution in the Mediterranean and to assist the response agencies, amulti-model oil spill prediction service has been set up, known as MEDESS-4MS (Mediterranean DecisionSupport System for Marine Safety). The concept behind the MEDESS-4MS service is the integration of theexisting national ocean forecasting systems in the region with the Copernicus Marine EnvironmentalMonitoring Service (CMEMS) and their interconnection, through a dedicated network data repository,facilitating access to all these data and to the data from the oil spill monitoring platforms, including thesatellite data ones, with the well established oil spill models in the region. The MEDESS-4MS offer arange of service scenarios, multi-model data access and interactive capabilities to suite the needs ofREMPEC (Regional Marine Pollution Emergency Response Centre for the Mediterranean Sea) and EMSA-CSN (European Maritime Safety Agency-CleanseaNet).100 2 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , A 560-440 ka tephra record from the Mercure Basin, southern Italy: volcanological and tephrostratigraphic implications
Integrated electron microprobe analyses (EMPAs) on glass and Sr–Nd isotope analyses have been performed on 17 tephras from the Middle Pleistocene Mercure lacustrine succession, southern Apennines. Two 40Ar/39Ar ages and the recognition of four relevant tephras from Colli Albani, Sabatini and possibly Roccamonfina volcanoes allowed us to ascribe the investigated succession to the late Marine Isotope Stage (MIS) 15–12 interval (560–440 ka). The Sr–Nd isotopes and major element glass compositions allowed us to attribute 10 out of the other 13 tephras to a poorly known activity of the Roccamofina volcano, whereas two layers were tentatively attributed to previously unknown Middle Pleistocene activity of Ponza Island or Campanian volcanoes, and one to Salina Island. The tephrostratigraphic correlation of the Mercure tephras with the Acerno lacustrine pollen record (Campania) also allowed us to evaluate the climatostratigraphic position of the tephras within the framework of the MIS 15–12 climatic variability. These results were obtained by combining the Sr–Nd isotope ratio with EMPA and 40Ar/39Ar geochronological data. This confirms the notable consistency of this approach for studying the Mediterranean Middle Pleistocene tephrostratigraphy, which, despite its great potential for both volcanology and Quaternary studies, has been hitherto barely explored.85 1 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Macroseismic effects highlight site response in Rome and its geological signature
(2012); ; ; ; A detailed analysis of the earthquake effects on the urban area of Rome has been conducted for the L’Aquila sequence, which occurred in April 2009, by using an on-line macroseismic questionnaire. Intensity residuals calculated using the mainshock and four aftershocks are analyzed in the light of a very accurate and original geological reconstruction of the subsoil of Rome based on a large amount of wells. The aim of this work is to highlight ground motion amplification areas and to find a correlation with the geological settings at a sub-regional scale, putting in evidence the extreme complexity of the phenomenon and the difficulty of making a simplified model. Correlations between amplification areas and both near-surface and deep geology were found. Moreover, the detailed scale of investigation has permitted us to find a correlation between seismic amplification in recent alluvial settings and subsiding zones, and between heard seismic sound and Tiber alluvial sediments.365 503
