Skip to main content
The search returned 149 results
Now showing 1 - 10 of 149
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Energetic wave-packet after first P-wave arrival during 2016 Central Italy seismic sequence: results from F-k array analysis in Amatrice area

    Following the M 6.0 of August 24 2016 Amatrice earthquake, a temporary seismic network was installed in the village of Amatrice, under the umbrella of the Italian Center for Seismic Microzonation (http://www.centromicrozonazionesismica.it), who conducted a preparatory survey to seismic microzonation with other Italian Institutions. This work focuses on data analysis of 7 stations installed in the Amatrice terrace which is representative of the geological condition of the town, with the aim of studying the possible presence of secondary effects during the seismic sequence caused by site conditions. Stiff bedrock outcroppings were also sampled with 2 reference stations. Preliminary analyses carried out on several earthquakes with Ml > 4 highlight the presence of a low frequency phase with a high energy content at 6 -7 seconds after the first P-wave arrival in almost all the recordings. This wave package was observed for the Mw 6.5 of October 30 earthquake and it has the highest amplitude of the entire recordings, having PGA values of 0.5 g and frequency between 2 and 3 Hz. Frequency-wavenumber analysis performed for the 7 stations array gives an important contribution for the interpretation of this phenomenon, showing that the low frequency wave-package for the examined events does not always show back-azimuth and slowness values compatible with the very first portion of the seismic record. It could be associated to the presence of reflected or refracted waves generated by secondary effects as geological or morphological heterogeneities at local or larger scale.
      64  46
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      111  148
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A geophysical multidisciplinary approach to investigate the shallow subsoil structures in volcanic environment: The case of Ischia Island

    The ability to image the underground structures of volcanoes is limited by the precision, resolution and pene tration depth of each single geophysical method. In order to improve the knowledge of specific volcanic edifices and to better understand the general behavior of structures, the use of a combination of methods is strongly recommended to exploit and maximize their complementary capabilities of resolution and penetration depths. In this work a large dataset of seismic and electromagnetic measurements has been used to provide a more detailed and improved geophysical image of the shallower portion of the northern sector of Ischia Island(Campania region, Italy), severely hit by the August 21, 2017 earthquake (Mw 3.9). We analysed data by using different methodologies: Horizontal-to-Vertical Spectral Ratio (HVSR), seismic array technique (f k),polarization analysis and Time Domain ElectroMagnetic (TDEM) survey. These methods are sensitive in a different way to tectonic features, lithologies, layer geometry and fluid distribution. Thus, their combination is useful for studying sites with complex crustal structures such as Ischia island, which is characterized by a well-developed geothermal system linked to the presence of a shallow magmatic body. Results of our study provides detailed information of the physical properties of the subsoil through: 1) the spatial distribution of the amplification parameters of ground motion, showing frequency peaks below 1 Hz and/or between 1 Hz and 5 Hz; 2) the definition of the velocity models up to 600 m depth, with shear wave velocities ranging from 150 m/s for the shallower layers to 2500 m/s for the half space; 3) the recognition of the correlation between the principal fault structures and polarization directions of the noise wavefield, mostly oriented along EW and NE-SW directions; 4) the resistivity models of the first 80 m depth with high resistivity values of the shallow layers in the range 50–100 Ω.m and low resistivity values of the bottom layers in the range 1–10 Ω.m.
      1330  84
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Site Characterization Of Station Iv.Lav9 (Lanuvio) Of Italian National Seismic Network

    Final report illustrating array measurements performed at IV.LAV9 station of the Italian national seismic network. This report is part of the Project: DPC-INGV 2016 agreement All. B2 Task B: Seismic characterization of accelerometric sites.
      95  175
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Geophysical investigations for seismic zonation in municipal areas with complex geology: The case study of Celano, Italy

    A quantitative prediction of seismic site effects requires the definition of a subsoil parametric model for ground motion numerical modelling. This paper describes an application of integrated geophysical methods to define an earthquake engineering parametric model for the seismic zonation of the municipal area of Celano, Italy. In municipal areas of such extent, particularly in case of complex geology, subsurface characterization is an optimization procedure, where the objective function to be minimized is the uncertainty related to the subsoil features, under the constraint of fixed resources and logistical limitations. In the particular case of Celano, correlation between different geophysical results was very profitable in discriminating different geological scenarios in the historical centre and in areas designed for urban expansion, while defining the elastic properties of the near-surface deposits throughout the municipal area.
      198  49
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The seismic microzonation of level 3 of Sant’Agata Fossili (northern Italy) based on a multidisciplinary approach

    In this paper the results of a detailed seismic microzonation, performed at Sant’Agata Fossili (Piemonte region, northern Italy) are presented. We study the local seismic response of this small village using a level 3, that is the most accurate level following the Italian code of seismic microzonation. The activity steps consist in a gradual widening of knowledge of the different aspects of the amplification phenomena. A multidisciplinary approach has been performed to obtain the local seismic response: including a study of local geology, geophysical and geotechnical characterization of the lithologies, and numerical and experimental analyses. We finally compare the obtained elastic response spectra to the prescribed spectra of the Italian Building Code (in Italian: Norme Tecniche per le Costruzioni). Our results show the geologic and geophysical differences of the subsoil, that produce different local seismic response in terms of amplification factors and acceleration response spectra.
      429  271
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Local Seismic Response in a Large Intra-mountain Basin as Observed from Earthquakes and Microtremor Recordings: The Avezzano Area (Central Italy)

    Buildings close to each other can perform different behaviour despite its similar seismic vulnerability. This effect is mainly due to the local seismic response connected to the characteristics of the shallow soil layers, especially when we move away from the epicentral area and the near field motion reduces its importance among the total amount of shaking. In this paper we show some results of the microzonation project of the Avezzano municipality, a town located in the southwestern portion of the Abruzzi region, which experienced the severe effects of the January 13th, 1915 M 7.0 earthquake. Starting from a particularly detailed knowledge of the geological characteristics of outcropping lithologies and inferring the trend of subsoil geometries, we explored the role played by the near-surface geology in causing variability of the ground motion by analysing a large database of earthquakes and microtremor recordings acquired by temporary seismological networks using classical site-reference and non-reference spectral techniques. Based on the obtained results we can seismically characterize all the municipal territory not only in terms of fundamental resonance frequency, useful in drawing maps of seismic microzonation and design geological sections, but also of amplification factors helpful in verifying numerical modelling of seismic response as required by national microzonation guidelines. We have also found many criticisms that need a more detailed analysis in order to establish the cause of these anomalies.
      101  7
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The ITalian ACcelerometric Archive (ITACA): processing of strong-motion data

    The Italian strong-motion database was created during a joint project between Istituto Nazionale di Geofisica e Vulcanologia (INGV, Italian Institute for Geophysics and Vulcanology) and Dipartimento della Protezione Civile (DPC, Italian Civil Protection). The aim of the project was the collection, homogenization and distribution of strong motion data acquired in Italy in the period 1972–2004 by different institutions, namely Ente Nazionale per l’Energia Elettrica (ENEL, Italian electricity company), Ente per le Nuove tecnologie, l’Energia e l’Ambiente (ENEA, Italian energy and environment organization) and DPC. Recently the strong-motion data relative to the 23th December 2009, Parma (Mw = 5.4 and Mw = 4.9) and to the April 2009 L’Aquila sequences (13 earthquakes with 4.1 ≤ Mw ≤ 6.3) were included in the Italian Accelerometric Archive (ITACA) database (beta release). The database contains 7,038 waveforms from analog and digital instruments, generated by 1.019 earthquakes with magnitude up to 6.9 and can be accessed on-line at the web site http://itaca. mi.ingv.it. The strong motion data are provided in the unprocessed and processed versions. This article describes the steps followed to process the acceleration time series recorded by analogue and digital instruments. The procedures implemented involve: baseline removal, instrumental correction, band pass filtering with acausal filters, integration of the corrected acceleration in order to obtain velocity and displacement waveforms, computation of accel- eration response spectra and strong motion parameters. This procedure is applied to each accelerogram and it is realised to preserve the low frequency content of the records.
      154  699
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    ask 6 - Gubbio - Deliverable D21: Geological model of the Gubbio basin (Italy) for the characterization of local seismic response

    Within the framework of the project S3 “Ground shaking scenarios for some strategic areas in Italy-Task6” the town of Gubbio has been selected as a test site to compute ground motion taking into account finite fault and site effects. Gubbio is located in central Italy, on the northern slopes of one of the many valleys characterising the central Appennines. The historical settlement is located on a rocky slope, while new developments extend on the Quaternary fluvio-lacustrine deposits filling the basin. The Gubbio basin was chosen as a test site for a number of reasons: its geomorphological setting is very common in central and southern Italy, the area is characterised by frequent near events of moderate magnitude (Mmax 6) and large amplifications were observed there for the Colfiorito seismic sequence of the 1997/98. In order to understand the mechanisms controlling the 3D seismic response of the basin, a subsurface model has been constructed. The reconstruction of the model has been done using data coming from different surveys (figure A). Several active and passive seismic measurements have been carried out in the plain, also favoured by the intense seismic activity typical of the area. These investigations mainly consisted of monitoring activities of 4 temporary transects of seismometric stations, operating between June 2005 and May 2006 and described in detail in PS3- Deliverables D22-D23. Two transects have been positioned perpendicularly to the valley axes (GFZ and Ge2 Transects), one parallel (INGV transect) and one near Gubbio (Ge1 transect). More than 300 local and regional earthquakes have been recorded, with maximum magnitude equal to 4. A 2D array was run as well from June to September 2006, to better understand the generation of surface waves. All data are collected in a GIS (Progetto S3 Deliverable D23) Parallel to these activities, ambient noise data have been collected in the field for 90 sites, using the single station technique for the estimation of the fundamental resonance frequencies. Furthermore, 4 noise measurements with a seismic array have been collected to build an S-wave velocity profile of soft sediments, considered representative for the whole plain. The geometry of the basin below 500 m of depth has been investigated through the acquisition of an active seismic line 4.5 km long, in correspondence of one of the transects. This has been used to perform a tomography of arrival times which allowed to recognise the position and shape of the reflecting horizons. As a final step the first 30 metres of deposits have been characterised over a 30 km2 area, using both stratigraphic investigations provided by the Gubbio Municipality and data collected from in-situ surveys and lab tests. In this deliverable we describe the input data for the 3D model of the Gubbio basin and we outline the steps performed to define the geometry, the layers and their seismic properties on the base of the experimental data collected during the project and of the available geological information.
      302  652
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Ground motion amplification at rock sites: the competing role of topography and fractured rocks in the San Giovanni fault, central Italy.

    Amplification at rock sites in areas of high topographic relief has been increasingly observed in the last years, with unexpected level of damage after strong earthquakes. In regions affected by recent tectonic activity, topographic irregularities can include fault damage zones. In such conditions, seismic waves can be locally amplified as a double effect of wave focusing along the topography and /or the presence of fractures/joints or locally weakened rocks. The role of topography vs. geological complexities in controlling the ground motion amplification at rock sites is a newly debated issue in the seismological community. The most crucial questions regard what is the real contribution of the topography shape and fracturing, and how to parameterize such effects for their inclusion in the seismic design codes. In this framework, the EMERSITO INGV task force installed 7 seismic stations across the San Giovanni fault, after the Amatrice mainshock of the 2016 sequence in Central Italy. This active normal fault is located in the area of the Montereale intermountain basin (Abruzzi region, Italy) and bounds the southwestern slope of Mt. Mozzano, a roughly 2D-shaped, up to 1450 m high pronounced topography. Moreover, this fault has been recently studied by several authors who performed detailed geological and geophysical surveys. Our stations recorded more than 100 earthquakes with magnitude ranging from 2.5 to 3.9 as well as a 4.4 M earthquake with hypocenter in Capitignano district, few kilometres far. We have analyzed in detail the recorded signals calculating the traditional spectral ratios at single station (HVSRs) and using the reference site (SSRs) using both ambient noise and earthquakes. In order to obtain a robust estimate of the site amplification effect at each station, we have investigated the influence of backazimuth and epicentral distance. We have also applied the time-domain covariance matrix analysis and the frequency domain polarization analysis. We have found that, in spite of the complexity of the seismic data, the observed polarization pattern is generally oriented orthogonal to the ridge elongation, as well as to the fault strike, suggesting the existence of a high angle relation between ground motion polarization and fracture systems
      78  71