Skip to main content
The search returned 18 results
Now showing 1 - 10 of 18
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Monitoraggio e controllo dei beni monumentali: formazione e certificazione del personale

    Il presente lavoro costituisce una proposta per la formazione e la certificazione del personale che opera nel campo dei controlli e del monitoraggio dei beni monumentali ubicati in area sismica. Per bene Monumentale si intende qualsiasi manufatto con connotati a valenza storico-artistica, realizzato prevalentemente in muratura, con eventuali elementi in calcestruzzo armato e/o legno. L'articolo scaturisce da una proposta di formazione da sviluppare nell'ambito del Progetto PON denominato MASSIMO, acronimo di "Monitoraggio in Area Sismica Sistemi Monumentali" e dal quale estrarre mirati percorsi di addestramento da inserire in un preciso contesto di certificazione, secondo gli usuali livelli di conoscenza previsti dalla norma UNI EN ISO 9712 "Prove non distruttive - Qualificazione e certificazione del personale addetto alle prove non distruttive". Il contributo espone il percorso formativo relativo al progetto di ricerca e illustra le peculiarità e gli obbiettivi di alcune attività di controllo e monitoraggio basate su tecniche NDT. Per le tecniche maggiormente utilizzate nel processo di controllo, sono elencate le conoscenze minime richieste e le ore di attività necessarie, a giudizio di chi scrive, per poter giungere ad una conoscenza più o meno approfondita del metodo, in base ai diversi livelli di competenza ed al fine di sostenere gli esami di certificazione.
      1041  62
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Controllo in area sismica di edifici storici in muratura/Historical Mansonry Buildings control in seismic area.

    (2014) ; ;
    Gaudiosi, I.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    ;
    Porco, G.; Università della Calabria
    ;
    The discussion deals with the historical masonry buildings located in seismic areas, characterized by a very high vulnerability. The article presents an overview of the investigations that help to define the geometric and dynamic model of such buildings, as well as two procedures to be used for their control and monitoring. Investigations such as ultrasonic, endoscopic or flat jacks measurements are currently a powerful tool both for the implementation of periodic verifications, both for the implementation of a rapid and reliable screening after a seismic event. In turn, two procedures for the structural control and monitoring are illustrated: one triggered by seismic events and one periodic. Both are based on the recordings of time histories of accelerations or velocities obtained inside the buildings. Appropriately acquired through a monitoring network of sensors and analysed in the frequency domain, these data may allow the recognition of any damaged areas and not only: they have great potential even if one wants to upgrade or enhance the dynamic model of the structure.
      260  81
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A S.M.A.R.T. system for the seismic vulnerability mitigation of Cultural Heritages

    Both assessment and mitigation of seismic vulnerability connected to cultural heritages monitoring are non-trivial issues, based on the knowledge of structural and environmental factors potential impacting the cultural heritage. A holistic approach could be suitable to provide an effective monitoring of cultural heritages within their surroundings at different spatial and temporal scales. On the one hand, the analysis about geometrical and structural properties of monuments is important to assess their state of conservation, their response to external stresses as well as anomalies related to natural and/or anthropogenic phenomena (e.g. the aging of materials, seismic stresses, vibrational modes). On the other hand, the investigation of the surrounding area is relevant to assess environmental properties and natural phenomena (e.g. landslides, earthquakes, subsidence, seismic response) as well as their related impacts on the monuments. Within such a framework, a multi-disciplinary system has been developed and here presented for the monitoring of cultural heritages for seismic vulnerability assessment and mitigation purposes*. It merges geophysical investigations and modeling, in situ measurements and multi-platforms remote sensing sensors for the non-destructive and non-invasive multi-scales monitoring of historic buildings in a seismic-prone area. In detail, the system provides: a) the long-term and the regional-scale analysis of buildings’ environment through the integration of seismogenic analysis, airborne magnetic surveys, space-borne Synthetic Aperture Radar (SAR) and multi-spectral sensors. They allow describing the sub-surface fault systems, the surface deformation processes and the land use mapping of the regional-scale area on an annual temporal span; b) the short-term and the basin-scale analysis of building’s neighborhood through geological setting and geotechnical surveys, airborne Light Detection And Radar (LiDAR) and ground-based SAR sensors. They enable assessing the site seismic effects, the built-up structural features and the surface deformation processes of the local-scale area on a monthly temporal span; c) the real- to near-real-time and building scale analysis of the heritage through proximal remotely sensing tools (e.g. terrestrial laser scanning, infrared thermal cameras and real aperture radar), combined with ambient vibration tests. They allow analyzing geometric, structural and material properties / anomalies of buildings as well as the state of conservation of structures on a real-time temporal span. The proposed approach is: Specific (it targets the cultural heritages monitoring for seismic mitigation purposes); Measurable (it provides synthetic descriptors or maps able to quantify structural and the environmental properties / anomalies / trends); Action-oriented (it provides information to plan consolidation and restoration actions for prevention activity); Relevant (it allows achieving consolidated results for cultural heritage monitoring); Time-related (it specifies when the results can be achieved). Meaningful results, obtained for the Saint Augustine Complex (XVI century) located in the historic center of the Calabrian chief town of Cosenza, are presented in terms of a web-based Geographic Information System (GIS) platform and a 3-dimensional (3D) visual software for the monitoring of environmental/urban landscapes and buildings. These tools represent the added-value products of the proposed SMART system, which allow integrating and combining multi-sensors analyses in order to support end-users involved into a cultural heritage monitoring.
      109  80
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    2D site response analysis of a cultural heritage: the case study of the site of Santa Maria di Collemaggio Basilica (L’Aquila, Italy)

    Abstract The Santa Maria di Collemaggio Basilica is an important cultural heritage site and exemplifies Romanesque-Gothic art in the Abruzzo region (central Italy). Erected in the second half of the XII century, the Basilica was severely damaged during the April 6, 2009 L’Aquila earthquake (MW 6.1). In particular, the area of the transept collapsed causing the dome to fall. A refined two-dimensional (2D) geotechnical model was built representing a section that includes the Basilica, in order to better understand the soil response of the Basilica site. The subsoil model was constrained using the geophysical and geotechnical data collected from the seismic microzonation studies, the reconstruction of private damaged buildings and other technical and scientific studies realized in the L’Aquila basin and in the area of the Basilica before and after L’Aquila earthquake. 2D site response analyses were performed to verify the presence of local site effects by comparing simulated versus experimental transfer functions. Moreover, a frequency–wavenumber (f– k) analysis was executed with the aim of evaluating the occurrence of surface waves generated within the basin. 2D seismic effects involve significant amplification in the period range of engineering interest, therein providing an appropriate elastic response spectrum for the restoration of the Basilica.
      212  318
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    THE DEEP STRUCTURE OF THE L'AQUILA BASIN INVESTIGATED USING ARRAY MEASUREMENTS

    (2011-08-23) ; ; ; ;
    Di Giulio, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    We present velocity profiles obtained through surface-wave methods in the historical city of L’Aquila (Italy). The city suffered severe damage (VIII-IX EMS intensity) during the April 6th 2009 Mw 6.3 earthquake. The area is characterized by the deep (up to 300-400 meters) basin of the Aterno river valley filled by lacustrine sediments over limestone bedrock. In downtown L'Aquila an outcropping unit basically composed of stiff conglomerates (Breccia) is over-imposed to ancient lacustrine sediments with a possible velocity inversion at a depth ranging from few tens up to one hundred meters. We deployed five 2-D arrays of seismic stations and 1-D array of vertical geophones in the city center. The 2-D arrays recorded ambient noise, whereas the 1-D array recorded signals produced by active sources. Surface-wave dispersion and spatial autocorrelation curves, calculated using array methods, were inverted through a neighborhood algorithm jointly with the microtremor HVNSR ellipticity. We obtain shear-wave velocity profiles (Vs) representative of the southern and northern sector of downtown L'Aquila. The resulting Vs profiles are used to compare the 1-D transfer functions to aftershock data results. We apply a convolution approach evaluating synthetic time-histories in sites where surface stratigraphy is known and comparing them to recorded strong-motion data.
      202  341
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Experimental analysis and numerical modeling of the seismic site response at Santa Maria di Collemaggio Basilica in L'Aquila

    (2013-12) ; ; ; ;
    Amoroso, Sara; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    The Basilica of Santa Maria di Collemaggio is an important cultural heritage site, considered as an extraordinary example of Romanic Art in the Abruzzo Region (Italy). Erected in the second half of the XII century, it suffered numerous transformations partly due to the damages incurred as result of several earthquakes. During the April 6, 2009 L’Aquila earthquake (MW = 6.3), the Basilica was strongly dam-aged and in particular the area of the transept collapsed causing the fall of the dome. Recently the Eni Company launched the financing project “Ripartire da Collemaggio” for the restoration of this historical building. The project includes a deep geological, geotechnical and geophysical in-vestigations, still ongoing (AA.VV., 2013), that complete the infor-mation on L’Aquila subsoil already provided by numerous studies car-ried on in downtown L'Aquila (MS–AQ Working Group, 2010; Amo-roso et al., 2010; Cardarelli e Cercato, 2010; Amoroso et al., 2014; Monaco et al., 2013; Santucci de Magistris et al., 2013; Monaco et al., 2012; Milana et al., 2011). This paper illustrates the preliminary results of seismic response anal-yses carried out at Santa Maria di Collemaggio Basilica, by using EE-RA (Bardet et al., 2000), a monodimensional (1D) code, and QUAD4M (Hudson et al., 1994), a bi-dimensional (2D) software. Both programs are dedicated to model the seismic response of a site also tacking into account for non-linear soil behaviour.
      221  46
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismic noise measurements along the slope of the L'Aquila terrace

    L'Aquila downtown (Central Italy) suffered strong damages during the April 6th 2009 Mw 6.3 earthquake. In particular many collapses and strong damages on buildings have been observed near the southern edge of the L'Aquila downtown. L'Aquila is bounded southward by the Aterno river valley along a steep scarp. The downtown is settled on a calcareous terrace, mainly composed of a Pleistocene stiff calcareous breccia over-imposed to ancient lacustrine sediments. The upper portion of the L'Aquila breccia in the area of Via XX Settembre, which borders the southern edge of the top of the morphological terrace of L'Aquila downtown, is irregularly affected by the presence of residual soils known as "red soils" or filling material. The continental deposits are characterized by a velocity inversion at a depth ranging from few tens up to one hundred meters. We performed extensive ambient vibration measurements along the south-western slope of the L'Aquila terrace, where some RC structures without anti-seismic design were heavily damaged during the Mw 6.3 mainshock. Noise measurements were conducted along several sections starting from the top of the terrace toward the base of the Aterno river valley. The aim was to investigate the relationship between horizontal-to-vertical amplitude spectra ratio (H/V method) with the geological and geomorphological variations existing along the flanks of the L'Aquila terrace. We also performed noise measurements within some open underground caves that are present along the slope of the calcareous terrace. We integrate our geophysical data with the available geological, geotechnical and geophysical data, performed for the seismic microzonation and the reconstruction of the damaged buildings. We find that the resonance frequency is varying from about 0.6 to 1 Hz for sites at the top of terrace and in proximity of the Aterno river valley, respectively. Larger amplitude of the resonance peak is observed at sites on the top of the terrace rather than the measurements performed at the base. Additionally, the H/V curves at the bottom of the L'Aquila terrace show an amplification in a broader frequency band. The variation in the H/V shapes, moving along the flanks of the L'Aquila terrace, is mainly related to a different behavior of the vertical component. Indeed the vertical recordings show a spectral minimum shifted at higher frequency for measurements nearby the Aterno river.
      353  356
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Frequencies identification from ambient vibration data in a masonry heritage building

    In this paper, we applied an Horizontal to Vertical (HV) spectral ratio analysis to ambient vibration data aiming at the preliminary seismic response identification of a masonry building, characterized by a significant complexity in terms of geometry and elevation. The building is monitored in the aim of the PON01-02710 MASSIMO project. We performed other standard Fourier analyses computing the Power Spectral density (PSD) and the Cross-Power Spectral Density (CPSD) of the signals. The obtained results demonstrates how HV may be very useful for a rapid screening of buildings in those complex cases such as structures belonging to the cultural heritages, and we concluded that noise measurements may indeed contribute to a detailed real dynamic response definition of a system. However, another main objective of this study is the integration of the results obtained by means of the classical aforementioned Fourier analysis techniques with those coming from the application of time-frequencies analyses: the Short-Time Fourier Transform (STFT) and the complex wavelet transform (CWT) which uses the modified complex Morlet function. In fact, there are few case studies of joint application of these different techniques to masonry heritages. Thus, the study provides the opportunity for integrating them and primarily, for exploring capabilities of wavelet transform in Structural Health Monitoring (SHM).
      309  69
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Geophysical and geochemical multi-method investigations for reconstructing subsurfaces, alluvial sedimentology, and structural geology (Tiber valley, Rome)

    Geophysical and geochemical methods were applied to detect the subsurface setting of an Upper Pleistocene-Holocene fluvial incised-valley where a travertine body intercalates between alluvial deposits of the Tiber river (central Italy), at Prima Porta (close to Rome). This study allowed us to provide more information regarding the local stratigraphic architecture and structural features, as a reference analogue to similar settings: i.e., hard (stiff) lithic travertines buried below fine and loose alluvial plain covers. Two Electrical Resistivity Tomography (ERT) profiles, interpreted and calibrated using previously collected litho-stratigraphic data from a borehole, identified a massive body, with a relatively high resistivity that correlates with the 21 travertine deposit of Prima Porta. In addition to ERT, ambient noise measurements, processed with the HVSR technique and 2D array, and seismic refraction tomography were carried out; HVSR data were highly consistent with ERT results and allowed to discriminate between the travertine body and the silty-sand channels and overbank deposits, which were attributed to the Tiber river’s evolution during Upper Pleistocene-Holocene. Finally, the presence of cracks/fractures could be inferred, as suggested by slight polarisation effects recorded in the HVSR results and soil-gas anomalies.
      46  639
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Shear-wave velocity profile and seismic input derived from ambient vibration array measurements: the case study of downtown L'Aquila

    Downtown L'Aquila suffered severe damage (VIII-IX EMS98 intensity) during the 2009 April 6 Mw 6.3 earthquake. The city is settled on a top flat hill, with a shear-wave velocity profile characterized by a reversal of velocity at a depth of the order of 50–100 m, corresponding to the contact between calcareous breccia and lacustrine deposits. In the southern sector of downtown, a thin unit of superficial red soils causes a further shallow impedance contrast that may have influenced the damage distribution during the 2009 earthquake. In this paper, the main features of ambient seismic vibrations have been studied in the entire city centre by using array measurements. We deployed six 2-D arrays of seismic stations and 1-D array of vertical geophones. The 2-D arrays recorded ambient noise, whereas the 1-D array recorded signals produced by active sources. Surface-wave dispersion curves have been measured by array methods and have been inverted through a neighbourhood algorithm, jointly with the H/V ambient noise spectral ratios related to Rayleigh waves ellipticity. We obtained shear-wave velocity (Vs) profiles representative of the southern and northern sectors of downtown L'Aquila. The theoretical 1-D transfer functions for the estimated Vs profiles have been compared to the available empirical transfer functions computed from aftershock data analysis, revealing a general good agreement. Then, the Vs profiles have been used as input for a deconvolution analysis aimed at deriving the ground motion at bedrock level. The deconvolution has been performed by means of EERA and STRATA codes, two tools commonly employed in the geotechnical engineering community to perform equivalent-linear site response studies. The waveform at the bedrock level has been obtained deconvolving the 2009 main shock recorded at a strong motion station installed in downtown. Finally, this deconvolved waveform has been used as seismic input for evaluating synthetic time-histories in a strong-motion target site located in the middle Aterno river valley. As a target site, we selected the strong-motion station of AQV 5 km away from downtown L'Aquila. For this site, the record of the 2009 L'Aquila main shock is available and its surface stratigraphy is adequately known making possible to propagate the deconvolved bedrock motion back to the surface, and to compare recorded and synthetic waveforms.
      247  31