Skip to main content
The search returned 29 results
Now showing 1 - 10 of 29
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Studying Past Earthquakes with Modern Techniques: Ground-Motion Simulations for the 11 January 1693 Noto Earthquake in Italy

    The 1693 Noto earthquake, which struck on 11 January, is one of the Italy’s largest and most devastating earthquakes. According to the Italian Parametric Earthquake Catalogue, it reached a maximum intensity of 11 on the Mercalli–Cancani–Sieberg scale and had an estimated magnitude of M 7.3. Nevertheless, its precise location and source definition remain subjects to debate due to the complexity of the seismic sequence and lack of geological evidence. A series of potential seismic sources differing in location, dimension, and kinematics have been proposed in the literature based on seismotec- tonic data and interpretations. The goal of this work is to perform a retrospective experiment to verify which of the proposed seismic sources have a better fit with the observed intensity data. To do so, novel simulation techniques are used to study this historical earthquake. We generated ground-motion scenarios for each proposed source model through a stochastic finite-fault simulation approach. Then, the simulated ground-motion parameters were converted to intensities using two different ground- motion intensity conversion equations for Italy. Finally, we compared these converted intensities with the observed intensity data in terms of normalized root mean square errors and converted intensities from ground-motion models. Our results generally show good consistency between converted intensities from the simulated and pre- dicted ground motions, whereas the observed intensities fit better to converted ones from the peak ground velocity rather than peak ground acceleration. Our analysis reveals that the source model reproducing the best of the macroseismic data of the Noto earthquake is the Canicattì–Villasmundo fault system with a magnitude of 7.1.
      11  32
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Esercitazione nazionale “Exe Sisma dello Stretto 2022” 04-06 novembre 2022. Rapporto di sintesi del Gruppo Operativo SISMIKO.

    Da venerdì 4 novembre a domenica 6 novembre 2022, si è tenuta una esercitazione nazionale denominata “Exe Sisma dello Stretto 2022” in un'area del territorio della Regione Calabria e della Regione Sicilia caratterizzata da una elevatissima pericolosità sismica. L’esercitazione è stata indetta e coordinata dal Dipartimento della Protezione Civile e aveva l’obiettivo di verificare la risposta operativa a un evento sismico significativo del Servizio Nazionale della Protezione Civile, di cui anche l’Istituto Nazionale di Geofisica e Vulcanologia fa parte. Durante le tre giornate, l’INGV ha avuto modo di testare tutte le procedure che l’Istituto ha codificato a partire da quelle del “Protocollo di Ente per le emergenze sismiche e da maremoto”. Dopo che INGV ha dato l’avvio all’intera esercitazione simulando il terremoto di magnitudo MW 6.2 (ML 6.0) alle ore 09:00 UTC in provincia di Reggio Calabria (5 km a SW dal comune di Laganadi), e ha, quindi, inviato il messaggio per il potenziale maremoto con un livello di allerta arancione; inoltre, il Presidente INGV ha prontamente convocato l’Unità di Crisi e attivato tutti Gruppi Operativi. Questi ultimi, nell’ambito dello scenario esercitativo, hanno verificato che i flussi di comunicazione interna e tutte le attività necessarie in emergenza sismica, presenti nei relativi protocolli operativi, risultassero rispettati. L’obiettivo primario dell’esercitazione è stato quindi quello di validare le attività previste e di aggiornare il personale afferente ai Gruppi Operativi stessi. Tra di essi, SISMIKO, che rappresenta il GO dedicato al coordinamento delle reti sismiche mobili INGV in emergenza, nelle settimane precedenti l’esercitazione ha predisposto tutte le attività che intendeva testare, descrivendole brevemente nel Documento d’impianto INGV e con maggior dettaglio in quello del Gruppo Operativo. A pochi giorni dalla chiusura dell’esercitazione, un terremoto di magnitudo ML 5.7 (MW 5.5) registrato alle ore 06:07 UTC del 09 novembre 2022 ha spostato l’attenzione dalla simulazione alla realtà.
      452  262
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Rapporto di sintesi del Gruppo Operativo SISMIKO a seguito del terremoto al largo della costa marchigiana settentrionale (Italia). MW 5.5 del 09-11-2022 ore 06:07 UTC

    Il 09 novembre 2022 alle ore 06:07 UTC (07:07 ora italiana) un terremoto di magnitudo ML 5.7 (MW 5.5) è stato localizzato dal sistema di sorveglianza sismica dell’Istituto Nazionale di Geofisica e Vulcanologia (INGV). L'epicentro è stato localizzato nel Mar Adriatico ad una distanza di circa 30 km dalla costa marchigiana in provincia di Pesaro e Urbino, a circa 31 km dalla città di Fano e 35 km dal capoluogo di provincia Pesaro. Il mainshock è stato seguito da una replica di ML 5.2 a un minuto di distanza. I due terremoti sono stati ben avvertiti in tutta la regione Marche, e anche in tutto il centro Italia fino a Roma e nelle regioni del nord Italia. Il Presidente dell’INGV, come previsto nel Protocollo di Ente per le emergenze sismiche e da maremoto, ha prontamente convocato l’Unità di Crisi e attivato tutti i Gruppi Operativi. Tra questi SISMIKO, che coordina le reti sismiche mobili INGV in emergenza, si è attivato immediatamente preparando la strumentazione necessaria per l’installazione di una rete sismica temporanea e per l’integrazione dei dati in acquisizione nel sistema di monitoraggio e sorveglianza sismica dell’INGV. Parallelamente alle attività di coordinamento e gestione dell’emergenza sono state attivate tutte le procedure inerenti la divulgazione (report, siti web, ecc) e l’analisi dei dati preliminari. La rete temporanea in emergenza è stata installata nelle prime 24 ore dalla scossa principale ad integrazione della rete sismica permanente dell’INGV in area epicentrale. La rete temporanea di SISMIKO, costituita da 8 stazioni sismiche trasmesse in tempo reale, ha permesso di migliorare il monitoraggio dell’evoluzione della sequenza, abbassando la soglia di detezione degli eventi sismici in area epicentrale e consentendo quindi una migliore localizzazione da parte del servizio di sorveglianza sismica nazionale. La gestione dell’emergenza sismica è avvenuta a pochi giorni di distanza dall’ esercitazione nazionale denominata “EXE Sisma dello Stretto 2022” svoltasi dal 4 al 6 Novembre 2022 nel territorio della Regione Calabria e della Regione Sicilia. L’esercitazione è stata coordinata dal Dipartimento della Protezione Civile. Le attività svolte durante EXE 2022 sono state per l’istituto, e in particolare per SISMIKO, propedeutiche per il buon esito di tutte le azioni messe in campo dall’INGV sin dai primi minuti dall’accadimento del mainshock del 9 Novembre.
      240  167
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Crustal permeability changes inferred from seismic attenuation: Impacts on multi-mainshock sequences

    We use amplitude ratios from narrowband-filtered earthquake seismograms to measure variations of seismic attenuation over time, providing unique insights into the dynamic state of stress in the Earth’s crust at depth. Our dataset from earthquakes of the 2016–2017 Central Apennines sequence allows us to obtain high-resolution time histories of seismic attenuation (frequency band: 0.5–30 Hz) characterized by strong earthquake dilatation-induced fluctuations at seismogenic depths, caused by the cumulative elastic stress drop after the sequence, as well as damage-induced ones at shallow depths caused by energetic surface waves. Cumulative stress drop causes negative dilatation, reduced permeability, and seismic attenuation, whereas strongmotion surface waves produce an increase in crack density, and so in permeability and seismic attenuation. In the aftermath of the main shocks of the sequence, we show that the M ≥ 3.5 earthquake occurrence vs. time and distance is consistent with fluid diffusion: diffusion signatures are associated with changes in seismic attenuation during the first days of the Amatrice, Visso- Norcia, and Capitignano sub-sequences. We hypothesize that coseismic permeability changes create fluid diffusion pathways that are at least partly responsible for triggering multi-mainshock seismic sequences. Here we show that anelastic seismic attenuation fluctuates coherently with our hypothesis.
      84  269
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    S-Wave Attenuation Variation and its Impact on Ground Motion Amplitudes During 2016–2017 Central Italy Earthquake Sequence

    A very energetic seismic sequence struck the central Apennines, Italy, in 2016–2017, with a series of damaging earthquakes, three of them with moment magnitudes M ≥ 5.9, and five of them with M ≥ 5.0, occurred over a few months between 24 August 2016, and late 2017. Several studies explained the phenomenon of a cascading earthquake sequence with fluid movements that provoked the rupture of different parts of the fault segments at different times and locations (e.g., Miller, Nature, 2004, 427, 724–727; Gabrielli, Frontiers in Earth Science, section Structural Geology and Tectonics, 2022; Malagnini, Frontiers in Earth Science, section Solid Earth Geophysics, 2022). In this study, we investigated the variation of crustal S-wave attenuation in terms of the frequency-dependent quality factor Q(f) before and after the main events (including the Amatrice, Visso, and Norcia subsequences, hereafter, AVN, and periods before and after the AVN multi-mainshock sequence). The spectral characteristics of regional attenuation in the central Apennines, as well as of the earthquake sources of the AVN sequence, are derived through regression analysis using a large set of seismograms; Q(f) is modeled, together with the bilinear geometrical spreading, g(r), using a widely used tool, namely, random vibration theory, RVT (Cartwright and Longuet-Higgins, 1956). The primary objective of this effort was to examine how the variability of crustal anelastic attenuation would impact the earthquake-induced ground motions. The latter is quantified in terms of peak ground accelerations (PGAs), peak ground velocities (PGVs), and pseudo spectral accelerations (PSAs) at 0.3 and 2 s . Here, we showed that the main events of the AVN sequence strongly affect crustal S-wave attenuation, including its frequency dependence. However, the effects of 1/Q(f) fluctuations on earthquake-induced ground motions are small and have a negligible impact on the seismic hazard.
      286  116
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A new procedure for evaluating light-to-moderate earthquake location based on InSAR data and forward modeling tested on Mediterranean area

    We propose a procedure based on remote sensing Sentinel-1 InSAR data aiming at evaluating the variability of the moment tensor solutions provided by different agencies in case of light-to-moderate earthquake. We model the expected coseismic ground deformations from the available moment tensor solutions and compare them with the real ones retrieved with the InSAR data. Any differences between location and intensity of simulated and estimated seismic-induced deformation fields allow indirectly evaluating the variability of the solutions in terms of epicenter locations and kinematics of the causative faults. We applied this investigation method to several light (4<Mw < 4.9) to moderate (5<Mw < 5.9) earthquakes occurred along the Mediterranean area since the launch of the Sentinel-1A mission in 2014. The selected seismic events cover all the faulting mechanisms and are characterized by different estimated magnitudes and depths thus offering a synoptic view of the performance of the procedure in several cases. Thanks to the global coverage and the unprecedented revisit time of Sentinel-1 acquisitions, the proposed procedure can be easily extended to any seismic event occurred inland worldwide.
      200  109
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Practical Issues in Monitoring a Hydrocarbon Cultivation Activity in Italy: The Pilot Project at the Cavone Oil Field

    In this paper we describe the results of an experimental implementation of the recent guidelines issued by the Italian regulatory body for monitoring hydrocarbon production activities. In particular, we report about the pilot study on seismic, deformation, and pore pressure monitoring of the Mirandola hydrocarbon cultivation facility in Northern Italy. This site hosts the Cavone oil field that was speculated of possibly influencing the 2012 ML 5.8 Mirandola earthquake source. According to the guidelines, the monitoring center should analyse geophysical measurements related to seismicity, crustal deformation and pore pressure in quasi real-time (within 24–48 h). A traffic light system would then be used to regulate underground operations in case of detecting significant earthquakes (i.e., events with size and location included in critical ranges). For these 2-year period of guidelines experimentation, we analysed all different kinds of available data, and we tested the existence of possible relationship between their temporal trends. Despite the short time window and the scarce quantity of data collected, we performed the required analysis and extracted as much meaningful and statistically reliable information from the data. We discuss here the most important observations drawn from the monitoring results, and highlight the lessons learned by describing practical issues and limitations that we have encountered in carrying out the tasks as defined in the guidelines. Our main goal is to contribute to the discussion about how to better monitor the geophysical impact of this kind of anthropogenic activity. We point out the importance of a wider seismic network but, mostly, of borehole sensors to improve microseismic detection capabilities. Moreover, the lack of an assessment of background seismicity in an unperturbed situation -due to long life extraction activities- makes it difficult to get a proper picture of natural background seismic activity, which would be instead an essential reference information for a tectonically-active regions, such as Northern Italy.
      1036  196
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    On the Heterogeneity of the Earthquake rupture

    The scaling of earthquake parameters with seismic moment and its interpretation in terms of self- similarity is still debated in the literature. We address this question by examining a worldwide compilation of corner frequency-based and elastic rebound theory (ERT)-based fault slip, area and stress drop values for earthquakes ranging in magnitude from -0.7 to 7.8. We find that corner frequency estimates of slip (and stress drop) scale differently than those inferred from the ERT approach, where the latter deviates from the generally accepted constant stress drop behavior of so- called self-similar scaling models. We also find that average slips from finite-source models are consistent with corner frequency scaling, whereas peak slip values are more consistent with the ERT scaling. The different scaling of corner frequency- and ERT-based estimates of slip and stress drop with earthquake size is interpreted in terms of heterogeneity of the rupture process. ERT-based estimates of stress drop decrease with seismic moment suggesting a self-affine behavior. Despite the inferred heterogeneity at all scales, we do not observe a clear effect on the Brune stress drop scaling with earthquake size.
      212  235
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Modulation of seismic attenuation at Parkfield, before and after the 2004 M6 earthquake, and one example from the Geysers geothermal field.

    Seismic attenuation is generally thought to be a constant, or a simple monotonic function of frequency, and generally not a function of time. Examples of exceptions include attenuation enhancement due to shallow earthquake-induced damage, and fluctuations due to fluid diffusion. In reality, seismic attenuation fluctuates continuously in time at all frequencies, and the presence of cracks, their density and connectivity, as well as the presence and saturation of fluids, play a central role in defining such behavior. Due to multiple mechanisms, the crack density within a fault’s damage zone varies throughout the seismic cycle. Moreover, non-tectonic stress loads, seasonal or tidal, can change the crack density of crustal rocks, and leave detectable signatures on seismic attenuation. A strong signature can also be left on the crustal attenuation by a stress transfer from a nearby fault. Here we show that attenuation time histories from the San Andreas Fault (SAF) at Parkfield are affected by seasonal loading cycles, as well as by 1.5–3 year periodic variations of creep rates, consistent with published results that documented a broad spectral peak, between 1.5 and 4 years, of the spectra calculated over the activity of repeating earthquakes, and over InSAR time series. After the Parkfield mainshock, the modulation of seismic attenuation is clearly correlated to tidal forces. Opposite attenuation trends are seen on the two sides of the fault up to the M6.5 2003 San Simeon earthquake, when attenuation changed discontinuously, in the same directions of the relative trends. Attenuation increased steadily for over one year on the SW side of the SAF, until the San Simeon earthquake, whereas it decreased steadily on the NE side of the SAF, roughly for the 6 months prior to the event. Random fluctuations are observed up to the 2004 M6 Parkfield mainshock, when rebounds in opposite directions are observed, in which attenuation decreased on the SW side, and increased on the NE side. Another example of changes of attenuation with time is given for the Geysers geothermal field, where a large data set of earthquake recordings from a dense temporal deployment are analyzed and results are given in terms of 1/Q(f,t).
      42  46
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Modulation of Seismic Attenuation at Parkfield, Before and After the 2004 M6 Earthquake

    The crack density within a fault's damage zone is thought to vary as seismic rupture is approached, as well as in the postseismic period. Moreover, external stress loads, seasonal or tidal, may also change the crack density in rocks, and all such processes can leave detectable signatures on seismic attenuation. Here we show that attenuation time histories from the San Andreas Fault at Parkfield are affected by seasonal loading cycles, as well as by 1.5–3‐year periodic variations of creep rates, consistent with Turner et al. (2015, https://doi.org/10.1002/2015JB011998), who documented a broad spectral peak, between 1.5 and 4 years, of the spectra calculated over the activity of repeating earthquakes, and over InSAR time series. After the Parkfield main shock, we see a clear modulation between seismic attenuation correlated to tidal forces. Opposite attenuation trends are seen on the two sides of the fault up to the M6.5 2003 San Simeon earthquake, when attenuation changed discontinuously, in the same directions of the relative trends. Attenuation increased steadily of over one year on the SW side of the San Andreas Fault, until the San Simeon earthquake, whereas it decreased steadily on the NE side of the San Andreas Fault, roughly for the six months prior to the event. Random fluctuations are observed up to the 2004 M6 Parkfield main shock, when rebounds in opposite directions are observed, in which attenuation decreased on the SW side, and increased on the NE side.
      171  201