Skip to main content
The search returned 28 results
Now showing 1 - 10 of 28
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    AdriaArray temporary deployment in the Po Plain and Sardinia (Italy)

    (Bologna : INGV, Istituto nazionale di geofisica e vulcanologia, Sezione di Bologna, 2010-, 2025-11-05) ; ; ; ;
    We present the deployment and performance of 17 temporary broadband seismic stations installed in Northern Italy and Sardinia as part of the AdriaArray project. These stations aim to densify the national seismic network, especially in areas with historically sparse coverage such as the Po Plain and Sardinia. We describe here the network design and site selection that follow high-quality standards developed during previous large-scale European seismic experiments. Despite challenging environmental and anthropogenic conditions, the stations recorded high-quality data, enabling both local and teleseismic event detection. We analyze the seismic noise characteristics across the network using probabilistic power spectral densities and observe that stations installed in sedimentary basins typically show higher noise levels at short periods, while stations in rock sites-especially in Sardinia-generally perform better. The use of different sensor types and installation methods also influences noise behavior, particularly in the long-period components. Despite the diverse conditions, the stations allow for the recording of both local and teleseismic events. The addition of the 4P stations improves the network's detection threshold by approximately 0.4 magnitude units in Sardinia and 0.2 in the North Italy. The open-access data from this deployment contribute to AdriaArray's broader goals of advancing seismic imaging and geodynamic interpretation in the Mediterranean region.
      18  28
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Combined impact of climate and seismic activity on groundwater hydrogeochemistry in the Eastern Southern Alps, Italy

    (Society for Enviornmental Geochemistry and Health, 2025-11) ;
    Damato, Adriana
    ;
    ; ;
    characterized by elevated Na, Cl, and temperatures, suggesting contributions from deeper sources. Stable isotopes of water and dissolved gases confirm meteoric origin for all springs, while 87 Sr/ 86 Sr, trace elements, and geothermometers further support deep inputs at Canal and Colesei. Statistical analyses (Principal Component Analysis and Change Point Detection) identified geochemical anomalies possibly linked to (i) prolonged drought, which reduced aquifer recharge and enhanced ion concentrations, and (ii) seismicity, notably a M w 5.8 earthquake ~245 km away, potentially varying mixing between shallow and deep systems. These results highlight the outstanding need for integrated monitoring to understand and manage groundwater resources, particularly in tectonically active and densely populated areas facing climate change and extreme events.
      6  77
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A state-of-the-art analysis system designed to monitor microseismicity at a local scale

    (Bologna : INGV, Istituto nazionale di geofisica e vulcanologia, Sezione di Bologna, 2010-, 2024-12-31) ; ; ; ;
      4  71
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Esercitazione nazionale “Exe Sisma dello Stretto 2022” 04-06 novembre 2022. Rapporto di sintesi del Gruppo Operativo SISMIKO.

    Da venerdì 4 novembre a domenica 6 novembre 2022, si è tenuta una esercitazione nazionale denominata “Exe Sisma dello Stretto 2022” in un'area del territorio della Regione Calabria e della Regione Sicilia caratterizzata da una elevatissima pericolosità sismica. L’esercitazione è stata indetta e coordinata dal Dipartimento della Protezione Civile e aveva l’obiettivo di verificare la risposta operativa a un evento sismico significativo del Servizio Nazionale della Protezione Civile, di cui anche l’Istituto Nazionale di Geofisica e Vulcanologia fa parte. Durante le tre giornate, l’INGV ha avuto modo di testare tutte le procedure che l’Istituto ha codificato a partire da quelle del “Protocollo di Ente per le emergenze sismiche e da maremoto”. Dopo che INGV ha dato l’avvio all’intera esercitazione simulando il terremoto di magnitudo MW 6.2 (ML 6.0) alle ore 09:00 UTC in provincia di Reggio Calabria (5 km a SW dal comune di Laganadi), e ha, quindi, inviato il messaggio per il potenziale maremoto con un livello di allerta arancione; inoltre, il Presidente INGV ha prontamente convocato l’Unità di Crisi e attivato tutti Gruppi Operativi. Questi ultimi, nell’ambito dello scenario esercitativo, hanno verificato che i flussi di comunicazione interna e tutte le attività necessarie in emergenza sismica, presenti nei relativi protocolli operativi, risultassero rispettati. L’obiettivo primario dell’esercitazione è stato quindi quello di validare le attività previste e di aggiornare il personale afferente ai Gruppi Operativi stessi. Tra di essi, SISMIKO, che rappresenta il GO dedicato al coordinamento delle reti sismiche mobili INGV in emergenza, nelle settimane precedenti l’esercitazione ha predisposto tutte le attività che intendeva testare, descrivendole brevemente nel Documento d’impianto INGV e con maggior dettaglio in quello del Gruppo Operativo. A pochi giorni dalla chiusura dell’esercitazione, un terremoto di magnitudo ML 5.7 (MW 5.5) registrato alle ore 06:07 UTC del 09 novembre 2022 ha spostato l’attenzione dalla simulazione alla realtà.
      452  262
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Practical Issues in Monitoring a Hydrocarbon Cultivation Activity in Italy: The Pilot Project at the Cavone Oil Field

    In this paper we describe the results of an experimental implementation of the recent guidelines issued by the Italian regulatory body for monitoring hydrocarbon production activities. In particular, we report about the pilot study on seismic, deformation, and pore pressure monitoring of the Mirandola hydrocarbon cultivation facility in Northern Italy. This site hosts the Cavone oil field that was speculated of possibly influencing the 2012 ML 5.8 Mirandola earthquake source. According to the guidelines, the monitoring center should analyse geophysical measurements related to seismicity, crustal deformation and pore pressure in quasi real-time (within 24–48 h). A traffic light system would then be used to regulate underground operations in case of detecting significant earthquakes (i.e., events with size and location included in critical ranges). For these 2-year period of guidelines experimentation, we analysed all different kinds of available data, and we tested the existence of possible relationship between their temporal trends. Despite the short time window and the scarce quantity of data collected, we performed the required analysis and extracted as much meaningful and statistically reliable information from the data. We discuss here the most important observations drawn from the monitoring results, and highlight the lessons learned by describing practical issues and limitations that we have encountered in carrying out the tasks as defined in the guidelines. Our main goal is to contribute to the discussion about how to better monitor the geophysical impact of this kind of anthropogenic activity. We point out the importance of a wider seismic network but, mostly, of borehole sensors to improve microseismic detection capabilities. Moreover, the lack of an assessment of background seismicity in an unperturbed situation -due to long life extraction activities- makes it difficult to get a proper picture of natural background seismic activity, which would be instead an essential reference information for a tectonically-active regions, such as Northern Italy.
      1036  196
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The 2011–2014 Pollino Seismic Swarm: Complex Fault Systems Imaged by 1D Refined Location and Shear Wave Splitting Analysis at the Apennines–Calabrian Arc Boundary

    In the years between 2011 and 2014, at the edge between the Apennines collapsing chain and the subducting Calabrian arc, intense seismic swarms occurred in the Pollino mountain belt. In this key region, <2.5mm/yr of NE-trending extension is accommodated on an intricate network of normal faults, having almost the same direction as the mountain belt. The long-lasting seismic release consisted of different swarm episodes, where the strongest event coinciding with a ML 5.0 shock occurred in October 2012. This latter comes after a ML four nucleated in May 2012 and followed by aseismic slip episodes. In this study, we present accurate relocations for ∼6,000 earthquakes and shear-wave splitting analysis for ∼22,600 event-station pairs. The seismicity distribution delineates two main clusters around the major shocks: in the north-western area, where the ML 5.0 occurred, the hypocenters are localized in a ball-shaped volume of seismicity without defining any planar distribution, whilst in the eastern area, where the ML 4.3 nucleates, the hypocenters define several faults of a complex system of thrusts and back-thrusts. This different behavior is also imaged by the anisotropic parameters results: a strong variability of fast directions is observed in the western sector, while stable orientations are visible in the eastern cluster. This tectonic system possibly formed as a positive flower structure but as of today, it accommodates stress on normal faults. The deep structure imaged by refined locations is overall consistent with the complex fault system recently mapped at the surface and with patterns of crustal anisotropy depicting fractures alignment at depth. The possible reactivation of inherited structures supports the important role of the Pollino fault as a composite wrench fault system along which, in the lower Pleistocene, the southward retreat of the ionian slab was accommodated; in this contest, the inversion of the faults kinematics indicates a probable southward shift of the slab edge. This interpretation may help to comprehend the physical mechanisms behind the seismic swarms of the region and defining the seismic hazard of the Pollino range: nowadays a region of high seismic hazard although no strong earthquakes are present in the historical record.
      1191  75
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Epistemic Uncertainties in Local Earthquake Locations and Implications for Managing Induced Seismicity

    Earthquake hypocentral location is perhaps the most classical problem in seismology, the solution of which is often affected by significant uncertainty. In monitoring the effects of underground anthropogenic activities, the earthquake hypocentral location, magnitude, and ground motions are important parameters for managing induced seismicity (as e.g., for operating traffic‐light systems). Such decisional systems define the operative reactions to be enacted once an earthquake, exceeding some magnitude or ground‐motion threshold, occurs within a monitoring volume defined in the neighborhood of a certain anthropogenic underground activity. In this case, a reliable evaluation of the hypocentral location, along with its uncertainty, becomes crucial for rational decision making. In this article, we analyze different sources of uncertainty that can be relevant for the determination of earthquake source locations, and introduce a logic‐tree‐based ensemble modeling approach for framing the problem in a decision‐making context. To demonstrate the performance of the proposed approach, we analyze uncertainties in the location of a seismic event that occurred on 22 July 2019 within the perimeter of the monitoring domain defined in the Val d’Agri oil field (southern Italy). We cast the result as a model ensemble that allows us to obtain samples from a parent distribution that better represents both aleatory and epistemic uncertainties of the earthquake location problem. We find that often‐neglected epistemic uncertainties (i.e., those that arise when considering alternative plausible modeling approaches or data) can be considerably larger and more representative of the state of knowledge about the source location, than the standard errors usually reported by the most common algorithms. Given the consequential repercussions of decision making under uncertainty, we stress that an objective evaluation of epistemic uncertainties associated with any parameter used to support decisional processes must be a priority for the scientific community.
      961  13
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Microseismic assessment and fault characterization at the Sulcis (South-Western Sardinia) field laboratory

    The general acceptance of the CO 2 geological storage by stakeholders passes through the assessment and mi- tigation of risks, potentially induced or increased by the disposal activity. Injection of moderate to large quantities of CO 2 in the sub-surface may unbalance local stress and trigger earthquakes if faults are critically stressed, condition that is not easily verifiable. Pilot sites are therefore the best way to proceed further in order to address such challenging issues. In such cases, the reconnaissance of faults and seismicity in the sub-surface, before the onset of activity, is mandatory. In this paper, we present studies carried out in the site where the Sotacarbo Fault Lab is going to be installed. This facility will be located in a very low seismic hazard region of central Mediterranean, where reports on historical large earthquakes are poor. We show results from a series of experiments aimed to monitor the background seismicity around the pilot site. As expected, seismicity is almost absent down to small magnitude close to the future injection-test well. Further seismic imaging of the sub- surface layers obtained by ambient noise tomography offers the ability to resolve the presence of a seismicity- free fault located in the first 200 m below the surface, of which the last episode of activity is difficult to assess. Our results encourage the use of this site to follow the response of the system to injection of small quantity of CO2.
      992  13
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Pollino seismic sequence/swarm

    In the years between 2010 and 2015 in the Apennines-Calabrian arc boundary, in the Pollino massif, a long seismic sequence took place. The area is subject to Northeast- Southwest extension, which results in a complex system of normal faults striking Northwest-Southeast, nearly parallel to the Apenninic mountain range. The seismic sequence includes more than 6000 earthquakes in the Pollino region, the maximum magnitude recorded is Ml=5.0 and it happened in October 25th 2012 after about two years of ongoing activity; the peculiar temporal evolution of the seismic sequence allows us to catalogue it as a swarm. Here we describe the main seismological characteristics of this seismic sequence and characterise the fracture field of the region. We analyse thousands of seismograms, deriving accurate locations crust velocity model and anisotropic parameters in the crust. These parameters yield clues and insights that may help understanding the physical mechanisms behind the seismic swarm. Since the late 60s-early 70s era seismologists started developing theories that included variations of the elastic properties of the Earth crust and the state of stress and its evolution prior to the occurrence of a large earthquake. Among the others the theory of the dilatancy: when a rock is subject to stress, the rock grains are shifted generating microcracks, thus the rock itself increases its volume. Inside the fractured rock, fluid saturation and pore pressure play an important role in earthquake nucleation, by modulating the effective stress. Thus, measuring the variations of wave speed and of anisotropic parameter in time can be highly informative on how the stress leading to a major fault failure builds up. We systematically look at seismic-wave propagation properties to possibly reveal short-term variations in the elastic properties of the Earth crust. In active fault areas, tectonic stress variation influences fracture field orientation and fluid migration processes, whose evolution over time can be monitored through the measurement of the anisotropic parameters. We analysed waveforms recorded at permanent and temporary stations hold by the Istituto Nazionale di Geofisica e Vulcanologia.
      198  119
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Emergenza sismica in Molise. Report preliminare del Gruppo Operativo SISMIKO.

    Il 16 agosto 2018 alle ore 18:19:04 UTC un terremoto di magnitudo ML 5.2 (Mw 5.1) è stato ben risentito in un’ampia area che comprende molte regioni del Centro Sud Italia. I sismologi in turno presso la sala di monitoraggio e sorveglianza sismica dell’Istituto Nazionale di Geofisica e Vulcanologia (INGV) hanno localizzato l’evento in provincia di Campobasso, a 4 km a Sud-Est di Montecilfone e ad una profondità inizialmente calcolata di 9 km. Nella stessa area si era verificato due giorni prima, il 14 agosto alle ore 23.48 italiane un terremoto di Mw 4.6 anch’esso ben risentito (i dettagli dell’evento sono reperibili alla pagina [http://cnt.rm.ingv.it/event/20375681]). A seguito dell’evento di magnitudo Mw 5.1 e della sequenza ad esso associata, come in ogni emergenza di questo tipo, è stato attivato il Gruppo Operativo SISMIKO [Moretti et al., 2012; 2016; Pondrelli et al., 2016] per l’installazione di alcune stazioni sismiche temporanee ad integrazione di quelle permanenti della Rete Sismica Nazionale (RSN [Michelini et al., 2016]) presenti nella regione.
      239  220