Skip to main content
The search returned 11 results
Now showing 1 - 10 of 11
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismo-stratigraphic model of the Po Plain (Italy)

    The aim of this study is to provide a seismo-stratigraphic model of the Po Plain sedimentary basin (Northern Italy), to be implemented in soil hazard studies at regional scale. The proposed model characterizes the subsoil up to the seismic bedrock depth. Mascandola et al. (2018) identifies the seismic bedrock of the Po Plain in correspondence with a marked increase in the mechanical properties of the subsoil materials, which produces a measurable resonance effect at the surface in the medium-to-long-period range. To map the seismic bedrock depth we relies on an extensive collection of both existing and newly acquired ambient vibration measurements, with the aim of defining the soil resonance frequencies and the shear-wave velocity gradients within the soft sediments above seismic bedrock. Based on the collected data, an empirical regression model that relates the thickness of the soil deposits above the seismic bedrock to their resonant frequency is defined and applied to map the seismic bedrock depth in the Po Plain area. The resultant seismic bedrock map is correlated with depth of the main unconformities recognized inside the Quaternary succession (Regione Emilia-Romagna,ENI–AGIP, 1998; Regione Lombardia, Eni Divisione Agip,2002). The shear-wave velocity model above seismic bedrock is derived through the interpolation of 51 S-wave velocity profiles selected after a quality check on the available data. The velocity gradients highlights two different zones inside the study area: one at Northwest and another at East-Southeast with higher and lower velocity gradients respectively. To compute the soil amplification functions, the velocity model is discretized into a grid. For each grid node, a 1D soil model is defined and a numerical ground response analysis is carried out. The gridded soil amplification model is checked at those sites with both borehole and surface seismic sensors by comparing the theoretical and empirical soil amplification functions. These results will be included in regional seismic hazard studies, to account for soil amplification in seismic hazard estimates.
      116  211
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The first Italian blast-induced liquefaction test (Mirabello, Emilia-Romagna, Italy): description of the experiment and preliminary results

    Soil liquefaction can result in significant settlement and reduction of load-bearing capacity. Moreover, the generation of pore pressure during an earthquake and its post-seismic dissipation can generate permanent deformations and settlements. The quantitative evaluation of post-liquefaction settlements is of extreme importance for engineering purposes, i.e. for earthquake-resistant design of new buildings and safety evaluation of existing ones. Quantifying the extent of these phenomena is, however, rather difficult. Uncertainties arise from the stochastic nature of the earthquake loading, from the simplifications of soil models, and from the difficulty in establishing correlations between the pre-earthquake soil state and the post-seismic deformations. Field scale liquefaction tests, under controlled conditions, are therefore important for a correct quantification of these phenomena. Recent experiences (e.g. New Zealand, United States) show that liquefaction can be induced and monitored with field scale blast tests to study the related effects on soil geotechnical properties. Within this framework this paper introduces the preliminary results obtained from a research project on blast-induced liquefaction at field scale. Tests were performed at a trial site located in Mirabello (Ferrara, Italy), a village strongly affected by liquefaction phenomena during the 2012 Emilia Romagna earthquake. Invasive tests, such as piezocone, seismic dilatometer and down-hole tests, and non-invasive tests were carried out before and after the execution of two blast test sequences to study the variation in physical properties of the soils. Pore pressure transducers, settlement profilometers and accelerometers were installed with the objective of measuring, during and after the detonations, the generation and subsequent dissipation of the pore pressure, the vertical deformations, and the blast-induced ground motions respectively. Variations in load distribution on deep foundations due to soil liquefaction were also evaluated on a test micropile instrumented with a strain gauge array. Topographical surveys were carried out to measure ground surface settlements. Laboratory tests and trenches also provided increased understanding of the site characteristics.
      1606  185
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Seismic sources and stress transfer interaction among axial normal faults and external thrust fronts in the Northern Apennines (Italy): A working hypothesis based on the 1916–1920 time–space cluster of earthquakes

    In this study we analyse themain potential seismic sources in some axial and frontal sectors of the Northern Apennines, in Italy. This regionwas hit by a peculiar series of earthquakes that started in 1916 on the external thrust fronts near Rimini. Later, in 1917–1921, seismicity (up to Mw ≈ 6.5) shifted into the axial zone and clearly migrated north-westward, along the belt of active normal faults. The collection of fault-slip data focused on the active normal faults potentially involved in this earthquake series. The acquired data allowed us to better characterize the geometry and kinematics of the faults. In a few instances, the installation of local seismic networks during recent seismic sequences allowed the identification of the causative faults that are hinted to be also responsible for past earthquakes, particularly in the Romagna region and north-eastern Mugello. The Coulomb stress changes produced by the historical earthquakes generally brought closer to failure all the faults that supposedly caused themain seismic events of 1916–1921. However, the stress change magnitude is generally small and thus the static stress interaction among the main seismic sources is not supported by a significant seismic correlation. Significant stress change loading may be instead inferred for the triggering of a number of seismic events on neighbouring normal faults by the Garfagnana 1920 earthquake. In addition, the computation of the seismic stress changes suggests that seismic events with magnitude ≥ 6 may transmit stresses from the axial normal faults to specific external thrusts and vice versa. It is possible that a correlation may be made between loading applied by the major 1917–1920 extensional ruptures and the increased seismicity on the distal external thrusts.
      194  11
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Earthquake Rupture Forecasts for the MPS19 Seismic Hazard Model of Italy

    In recent years, new approaches for developing earthquake rupture forecasts (ERFs) have been proposed to be used as an input for probabilistic seismic hazard assessment (PSHA). Zone- based approaches with seismicity rates derived from earthquake catalogs are commonly used in many countries as the standard for national seismic hazard models. In Italy, a single zone- based ERF is currently the basis for the official seismic hazard model. In this contribution, we present eleven new ERFs, including five zone-based, two smoothed seismicity-based, two fault- based, and two geodetic-based, used for a new PSH model in Italy. The ERFs were tested against observed seismicity and were subject to an elicitation procedure by a panel of PSHA experts to verify the scientific robustness and consistency of the forecasts with respect to the observations. Tests and elicitation were finalized to weight the ERFs. The results show a good response to the new inputs to observed seismicity in the last few centuries. The entire approach was a first attempt to build a community-based set of ERFs for an Italian PSHA model. The project involved a large number of seismic hazard practitioners, with their knowledge and experience, and the development of different models to capture and explore a large range of epistemic uncertainties in building ERFs, and represents an important step forward for the new national seismic hazard model.
      3092  170
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    An inter-disciplinary and multi-scale approach to assess the spatial variability of ground motion for seismic microzonation: the case study of Cavezzo municipality in Northern Italy

    Seismic microzonation represents a basic tool for prevention activity planning and land management. An extensive and detailed microzonation study was performed with reference to the territory of the Municipality of Cavezzo, damaged during the seismic sequence hitting Emilia-Romagna Region, Northern Italy, in 2012. In this paper, we discuss the work carried out to characterize the spatial variability of ground motion amplification due to local soil conditions in the municipality area. An inter- and multi-disciplinary approach is presented, involving geotechnical engineers, geophysicists, geologists and seismologists from different institutions, to thoroughly characterize the territory using complementary techniques with different level of resolution and confidence. A considerable amount of geomorphological, geological, hydrogeological, seismological, geotechnical and geophysical investigations was collected and processed for the purpose. A GIS-based (Geographic Information System) platform was initially setup to manage the gathered data, which now includes the results of about 1000 geotechnical and geophysical tests. Such an extended dataset was then used as a primary constraint for the creation of a comprehensive pseudo-3D geotechnical and seismo-stratigraphic model of the territory, consisting of a dense grid of one-dimensional vertical profiles to depict the variability of the soil properties over the area. The model was finally used as input for linear-equivalent ground response analysis. For the calculation of the amplification factors, special emphasis was given to the treatment and propagation of the uncertainties of the model parameters, whose different realizations have been accounted through a logic tree approach.
      272  4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismogenic zonation as a branch of the logic tree for the new Italian seismic hazard map - MPS16: a preliminary outline

    The zonation presented in this study has been developed with the aim of applying it as a branch of the logic tree that will be used for the new Italian seismic hazard map, presently in preparation according to the approach of seismotectonic probabilism. With respect to the zonation used for the present official seismic hazard map of Italy, the zonation proposed here considers narrower sources and is based on new and updated seismological data. In particular, some new seismogenic zones are proposed here, introducing areas that were not considered seismogenic until now (e.g., the narrow sources characterised by the presence of transform faults which are almost normal to the trend of the northern Apennines). The preliminary seismic hazard estimates produced with this new zonation aim to identify possible problems that the zonation introduces in the seismicity characterization of the seismogenic zones. As the present seismic hazard assessment was computed by considering a different attenuation model with respect to the one applied for the previous national seismic hazard maps, a re-elaboration of the most recent map referring to Italy has been developed: the comparison of the two maps is a good indicator of the areas where additional seismological investigation is needed to support the zonation presented here. In particular, some zones are not adequately documented with regard to seismicity and a different computation of the seismicity rates is suggested.
      161  221
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Mapping the Seismic Bedrock of the Po Plain (Italy) through Ambient‐Vibration Monitoring

    In earthquake engineering, “engineering bedrock” is regarded as a stiff material (i.e., rock or rock-like geological formation) that is characterized by a shearwave velocity greater than a target value (e.g., 800 m=s; current Italian and European seismic codes). In the case of deep basins, the identification of engineering bedrock is problematic, because it can lie well below the penetration depth of most common prospecting methods (i.e., a few tens of meters). Moreover, the depth of engineering bedrock might not represent an effective proxy of the sedimentary thickness responsible for site amplification. The Po Plain sedimentary basin (northern Italy) is one of the deepest and widest worldwide, and it presents such problems. The aim of this work is to estimate the sedimentary thickness responsible for ground-motion amplification at medium and long periods in the Po Plain. Passive seismic prospecting methods based on ambient-vibration measurements using single-station and array configurations were considered to map “seismic bedrock” depth. This corresponds to a marked seismic impedance contrast where the shear-wave velocity approached, or exceeded, 800 m=s. In the latter case, seismic and engineering bedrocks coincided. Our mapping will be useful for future site response assessments, numerical modeling of seismicwave propagation, dynamic ground response analyses, and site-specific seismic hazard evaluation at the basin scale.
      514  30
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Liquefied sites of the 2012 Emilia earthquake: a comprehensive database of the geological and geotechnical features (Quaternary alluvial Po plain, Italy)

    This paper presents a comprehensive geological and geotechnical study of the whole area affected by liquefaction following the 2012 Emilia earthquakes, including all the available information from the field reconnaissance surveys, in situ tests, and laboratory analyses. The compilation was performed at 120 liquefied sites to verify and validate the reliability of liquefaction charts in alluvial sediments, and to assess liquefaction induced by the 2012 seismic sequence in the Emilia plain. The results reveal a wide range of grain sizes (from clean sands to sandy silts) and compositional characteristics (quartz-rich to litharenitic) in the 2012 ejecta, and show a strong relationship between the liquefaction and stratigraphic architecture of the subsurface. The availability of in situ tests at the liquefied sites makes it possible to verify and validate the reliability of the liquefaction charts in alluvial sediments with respect to the real observations. For the analyzed Emilia case studies, the use of non-liquefiable crust provides better estimations of the liquefaction manifestations when coupled with the thickness of the liquefiable layer rather than with the liquefaction potential index. Altogether, this work makes available to the international scientific community a consistent liquefaction database for in-depth earthquake studies
      237  110
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Seismic hazard of the Northern Apennines based on 3D seismic sources

    Seismic hazard has been computed for the Northern Apennines in northern Italy based on a new seismogenic zonation. This zonation considers inclined (dipping) planes as seismogenic sources, defined on the basis of all the seismotectonic information available so far. Although these geometries are extremely rough because they simplify with a few inclined elements the totality of faults constituting a source, this model mimics the tectonic style better than that based on horizontal planes. Nevertheless, for a comparison between the new ground motions obtained and those available in the literature, the plane version of the zonation has been developed, where horizontal areas (the standard seismogenic zones), representing the surficial projection of the inclined planes, are used as seismogenic sources.
      127  5
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Interpreting the deformation phenomena triggered by the 2012 Emilia seismic sequence on the Canale Diversivo di Burana banks

    L’ articolo descrive uno studio riguardante i fenomeni deformativi osservati dopo il sisma dell’Emilia del maggio 2012 lungo un tratto di argine del Canale Diversivo di Burana che ricade nell’abitato di Scortichino, frazione del comune di Bondeno (FE). In questa porzione del rilevato arginale sono state edificate oltre un centinaio di abitazioni ed alcune strutture di medio-piccole dimensioni adibite ad attività produttive o a deposito, molte delle quali sono risultate pesantemente danneggiate e dichiarate inagibili proprio a causa delle deformazioni e del sistema di fratture longitudinali presenti nel terreno in seguito al terremoto. Il contributo qui presentato si prefigge di analizzare la risposta sismica dell’argine durante la sequenza sismica del 2012, comprendere le cause dei dissesti nonché individuare le necessarie azioni di mitigazione e gli eventuali interventi di messa in sicurezza nei confronti di terremoti futuri. A questo scopo è stata condotta un’ampia campagna sperimentale di indagini in sito e in laboratorio, finalizzata alla ricostruzione di un accurato modello geotecnico per la valutazione delle condizioni di stabilità dell’argine in condizioni sismiche, portando in conto anche l’eventuale insorgenza di fenomeni di liquefazione nei terreni sabbiosi superficiali costituenti la fondazione del corpo arginale. L’ analisi illustrata è il risultato dell’attività di indagine svolta per più di un anno dal Gruppo di Lavoro Argini (GdLA), costituitosi nel luglio 2012 in seguito ad un accordo fra la Regione Emilia-Romagna e l’Associazione Geotecnica Italiana per la verifica delle condizioni di stabilità dei rilevati arginali nelle aree colpite dal terremoto.
      188  258