Mascandola, Claudia
Preferred name
Mascandola, Claudia
Email
claudia.mascandola@ingv.it
ORCID
Scopus Author ID
57191342043
59 results
Filters
Settings
The search returned 59 results
Now showing 1 - 10 of 59
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Application of the conditional spectrum approach for the selection of ground motion time histories in vast areas: an example in the Lazio region
(Dordrecht: Springer Dordrecht : Kluwer, 2025); ; ; ; Zini, ASelection of accelerometric time histories is a fundamental step in seismic microzonation studies as well as in structural and ground response analyses. In this study we apply the procedure of Mascandola et al. (2020) for record selection in vast areas to the Lazio region (Central Italy). Unlike the original approach, we apply a different unsupervised clustering algorithm to divide the study area into mesozones, defined as zones that are homogeneous in terms of seismic hazard. Moreover, we apply the conditional spectrum ($$CS$$) method for the selection of ground motion time histories. Concerning the zoning of the study area, two clustering algorithms are compared: K-means and Spectral clustering. We found that the latter provides a zonation that is more consistent with the spatial distribution of the seismic hazard as well as of hazard disaggregation and is therefore suggested for record selection in vast areas. For each mesozone, two conditional spectra (computed for two conditioning oscillator periods) are then defined and adopted as reference for the selection of real accelerometric records. The latter are selected from a large sample of accelerograms that include earthquakes having magnitude and distance consistent with the seismic scenarios controlling the hazard. The article ends with a comparison of different techniques for the selection of real acceleration time histories. We analyze the impact of different sets of accelerograms on the ground response of two soil profiles resonating at the same periods used for conditioning the spectra (i.e., 0.2s and 1.0s). The results confirm that the conditional spectrum approach is targeted at oscillatory systems with a well-specific vibration period, for which the conditional spectrum might provide more conservative ground motions than the standard uniform hazard spectrum approach. Conversely, the latter approach is preferable for dynamic analyses of systems where more than one response period is relevant. Furthermore, our findings show that dividing the area into mesozones and selecting accelerograms using a single reference spectrum for each mesozone produces results comparable to those obtained through conventional methods based on site-specific record selection. Therefore, our approach can significantly streamline the selection of accelerometric time histories, especially in the case of vast areas.9 55 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , ESM processing tool users’ manual
The behaviour of the ground surface and of structures subjected to earthquakes can be estimated analysing the accelerograms of seismic records. The ground motion is strongly dependent on several factors and the ability to record, characterize and extract the main features of waveforms is essential to better understand these dependencies. One of the most difficult steps of this analysis is the waveforms’ processing. Its purpose is the estimation and the removal of noise in the records, to evaluate reliable ground motion. In this framework a processing tool fully integrated within the Engineering Strong Motion (ESM) database was designed [Paolucci et al., 2011; Luzi et al., 2016]. In the last decade the number of waveforms is sharply increased and so is the time it takes to process them. To solve this issue a possible solution is to broaden the number of qualified people involved in the processing. The main aim of this tutorial is to teach the largest number of people how to use the ESM processing tool and to provide some important guidelines for the thresholds of the parameters to set. In the text a step by step processing routine is depicted with a description of the purpose for each parameter. In addition, a suite of explanatory examples with peculiar situations is given.292 280 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Impact of Site-Response Characterization on Probabilistic Seismic Hazard in the Po Plain (Italy)
We present a probabilistic seismic hazard analysis (PSHA) for the entire Po Plain sedimentary basin (Italy)—one of the widest Quaternary alluvial basins of Europe, to evaluate the impact of site-response characterization on hazard estimates. A large-scale application of approach 3 of the U.S. Nuclear Regulatory Commission (NRC) to include seismic amplification in the hazard is presented. Both 1D amplification related to stratigraphic conditions and 3D amplification due to basin effects are considered with the associated uncertainties, and their impact on the hazard is analyzed through a sensitivity analysis. Whereas 3D basin effects are considered through the application of an empirical, spatial invariant correction term, 1D amplification was estimated throughout the study area by means of dynamic (equivalent linear) ground-response analysis. To separate aleatory variabilities and epistemic uncertainties related to site response, a partially nonergodic approach is used. The results provide a finer picture of the actual seismic hazard, highlighting those areas where the ground motion is affected by amplification effects due to local or regional geological features. We found that, for a return period of 475 yr, neglecting basin effects produces a 30% underestimation of the seismic hazard in the long-period ( > 1 s) range. Moreover, with reference to the hazard model adopted, such effects are responsible for most of the epistemic uncertainty (up to 80%) in the results. Therefore, such effects deserve special attention in future research related to PSHA in the Po Plain sedimentary basin.116 153 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , ESMpro: a proposal for improved data management for the Engineering Strong Motion database (ESM)
The strategy for data processing in the Engineering Strong-Motion Database (ESM) is to disseminate only manually revised data to ensure the highest quality. However, manual processing is no longer sustainable, due to the ever-increasing rate of digital earth-quake records, from global, regional, and national seismic networks, and a new frame-work for strong-motion data processing is required, so that records are automatically processed and the human revision is restricted to selected significant records. To this end, we present ESMpro—a modular Python software for a renewed processing frame-work of ESM. The software is available in a stand-alone beta version to facilitate testing and sharing among the scientific community. ESMpro provides automatic settings for waveform trimming and filtering, along with the automatic recognition of poor-quality data and multiple events. ESMpro allows classifying each record in different quality classes to reduce manual revision on a subset of the incoming data. ESMpro also allows handling different processing techniques in a modular and flexible structure to facilitate the implementation of new or alternative algorithms and file formats. The testing performed on the ESM database results in a good correspondence between the automatic and manual data processing, supporting the migration toward fully automatic procedures for massive data processing.370 186 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The Meran-Mauls Fault: Tectonic switching from compression to transpression along a restraining bend of the Periadriatic Fault
The WSW-ENE Meran-Mauls Fault (MMF) represents a break in the broadly E-W trending Periadriatic Fault (PAF), separating the Southern Alps from the N-verging wedge of the European Alps. Understanding the MMF evolution is mandatory to reconstruct the role of the entire PAF during the evolution of the belt since the late Cenozoic. Structural and microstructural analyses and paleostress calculations based on fault-slip data suggest the occurrence of four evolutionary stages for the MMF: 1) top-to-the-SE mylonites; 2) top-to-the-SE brittle faulting; 3) dextral faulting with re-activation of previous structures; 4) N–S compression associated with conjugate sets of mainly strike-slip fault systems. Paleostress reconstructions point to a σ2-σ3 permutation from stage 2 to stage 3, resulting in the switch from pure thrusting to strike-slip, followed by an anticlockwise rotation of the principal stress axes during stage 4, in a strike-slip regime related to N–S compression. Geochronological and thermochronological data point to 39-22 Ma age for stage 1, 22-17 Ma for stage 2, less than 17 Ma for stage 3. Our reconstruction strongly supports the interpretation of the MMF as a restraining bend of the PAF, which was weakly reactivated along its eastern portion as a dextral fault and later displaced by NNE-SSW left-lateral faults.111 51 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Toward a renewed data processing of the Engineering Strong Motion (ESM) database
Strong-motion records and open access to strong-motion data repositories are fundamental to seismology, earthquake engineering and practice. The main archive to disseminate high quality processed waveforms for the European-Mediterranean region is the Engineering Strong-Motion Database (ESM, https://esm-db.eu). ESM is developed under the general coordination of the ORFEUS Strong-Motion Management Committee (Observatories and Research facilities for European Seismology; http://orfeus-eu.org/), with the aim to provide users daily access to updated strong-motion waveforms of earthquakes with magnitude greater than 4, mainly recorded in the Pan-European regions. ESM is fully compatible with the European Integrated Data Archive (EIDA; http://orfeus-eu.org/data/eida/) and disseminates waveforms and related metadata according to the Federation of Digital Seismograph Networks (FDSN, https://www.fdsn.org/networks/). The strategy of ESM is to disseminate only manually processed data to ensure the highest quality. However, the rapid increase in the number of waveforms, due to the increment of seismic stations, leads to the need of automatic procedures for data processing and data quality control. In this work, we present ESMpro, a modular Python software for a renewed processing framework of ESM. The ESM data processing is improved with: (1) automated data quality-check that speeds up the processing time through the rejection of poor-quality records; (2) advancement of the automatic settings for waveform trimming and filtering; (3) introduction of different algorithms for data processing (Paolucci et al., 2011; Schiappapietra et al., 2021); (4) modular and flexible software structure that allows the addition of new algorithms and custom workflows. The accuracy of the updated automatic processing is evaluated by comparison with the waveforms processed by expert analysts, used as benchmarks (Mascandola et al., 2022). ESMpro is distributed in a stand-alone Beta version available on GitLab (D’Amico et al., 2022; https://shake.mi.ingv.it/esmpro/), following the Open Science principles to promote collaborations and contributions from the scientific community. In the next future, a renewed ESM web-processing frontend will be developed to include the ESMpro improvements, as well as new functionalities to process stand-alone data (i.e., not stored in the ESM database) and to allow different input seismic data formats. How to cite: Mascandola, C., D'Amico, M., Russo, E., Luzi, L., Lanzano, G., Felicetta, C., Pacor, F., and Sgobba, S.: Toward a renewed data processing of the Engineering Strong Motion (ESM) database, EGU General Assembly 2023, Vienna, Austria, 24–28 Apr 2023, EGU23-2210, https://doi.org/10.5194/egusphere-egu23-2210, 2023.48 132 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 189 175 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Gruppo Operativo EMERSITO - Evento sismico Costa Marchigiana 2022 - Rapporto N. 2 del 13/11/2022
(2022-11-13); ; ; ; Il giorno 9 Novembre 2022, alle 06:07:24 UTC (07:07:24 ora locale) un terremoto di magnitudo momento (MW) pari a 5.5 ha interessato la Costa Marchigiana Pesarese (Pesaro Urbino). A causa della magnitudo del mainshock e del livello di danneggiamento riscontrato, l’INGV ha attivato il gruppo operativo EMERSITO (http://emersitoweb.rm.ingv.it/index.php/it/), il cui obiettivo è di svolgere e coordinare le campagne di monitoraggio per studi di effetti di sito e di microzonazione sismica. Nel presente Report sono descritte le attività portate avanti nei giorni successivi al Report n.1 (Gruppo Operativo EMERSITO (2022) - Rapporto n.1 preliminare sulle attività svolte dal gruppo operativo Emersito a seguito dell’evento sismico Costa Marchigiana Pesarese Mw 5.5 del 9/11/2022. Pubblicato il 9/11/2022, URL: http://hdl.handle.net/2122/15783): reperimento di informazioni geologiche e geofisiche, di studi su effetti di sito già osservati nella zona colpita e della microzonazione sismica disponibile. In base ai dati recuperati, è stata pianificata l’installazione di una rete sismica temporanea di circa 10 stazioni nell’area urbana di Ancona, capoluogo di provincia e importante zona portuale, caratterizzata da livelli alti di PGA e che ha subito danni diffusi e evacuazioni, caratterizzata da elevate eterogeneità litologiche e morfologiche. Sono stati inoltre analizzati i dati registrati durante l’attuale sequenza sismica ed acquisiti dalle stazioni sismiche permanenti (IV e IT) e temporanee (GO SISMIKO) presenti nell’area, per verificare la presenza di effetti di sito nelle registrazioni.236 145 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Gruppo Operativo EMERSITO - Evento sismico Costa Marchigiana 2022 - Rapporto N. 1 del 09/11/2022
(2022-11-09); ; ; ; Il giorno 9 Novembre 2022, alle 06:07:24 UTC (07:07:24 ora locale) un terremoto di magnitudo momento (MW) pari a 5.5 ha interessato la Costa Marchigiana Pesarese (Pesaro Urbino). A causa della magnitudo del mainshock e del livello di danneggiamento riscontrato, l’INGV ha attivato il gruppo operativo EMERSITO (http://emersitoweb.rm.ingv.it/index.php/it/), il cui obiettivo è di svolgere e coordinare le campagne di monitoraggio per studi di effetti di sito e di microzonazione sismica. Durante le prime fasi di un’emergenza sismica, l’attività principale del gruppo operativo EMERSITO consiste, attraverso la costituzione di gruppi di lavoro, nel reperimento delle informazioni geologiche e geofisiche, nell’analisi dei dati sismici esistenti, nella pianificazione di misure sismologiche e geofisiche ed in attività propedeutiche alla microzonazione sismica. Nel caso specifico della sequenza sismica della Costa Marchigiana Pesarese: - sono state reperite informazioni di letteratura sugli effetti di sito già osservati nella zona colpita, sulla cartografia geologica e sulla microzonazione sismica disponibile; - sono state reperite le informazioni di caratterizzazione dei siti delle stazioni sismiche permanenti presenti nell’area (http://itaca.mi.ingv.it/ItacaNet_31 e http://crisp.ingv.it) e sono stati rianalizzati alcuni dati disponibili (http://eida.ingv.it/). - è stata pianificata l’installazione di una rete sismica temporanea nella zona colpita dal terremoto, nei comuni di Ancona e Senigallia. La scelta delle aree è stata guidata principalmente dalla prossimità con l’area epicentrale, dalla disponibilità di studi di microzonazione sismica e di carte geologiche a differenti scale di rappresentazione, dalla distribuzione dei parametri di scuotimento del suolo e della sismicità in tempo reale.371 341 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Consistency Check of ITACAext, the Flatfile of the Italian Accelerometric Archive
We present the results of a consistency check performed over a flatfile of accelerometric data extracted from the ITalian ACcelerometric Archive (ITACA), enriched with velocimetric records of events with magnitude M < 4.0. The flatfile, called ITACAext, includes 31,967 waveforms from 1709 shallow crustal earthquakes, in the magnitude range from 3.0 to 6.9, and occurred in the period of 1972–2019 in Italy. The consistency check is carried out by decomposing the residuals obtained from a reference ground motion model, for the ordinates of the 5% damped acceleration response spectra. The residual components are subsequently analyzed to identify a list of events, stations, and records that significantly deviate from the median trends predicted by the model. The results indicate that about 10% of events and stations are outliers, while only 1% of the waveforms present anomalous amplitudes. The asymmetrical azimuthal coverage of seismic stations around the epicenter is the most common issue that can affect the estimates of the repeatable event residual term. On the other hand, peculiarities in the site-response or wrong estimates of the soil parameters (i.e., the average shear-wave velocity in the first 30 m of the subsoil) are the main issues related to the repeatable station residuals. Finally, single records can show large residuals because of issues related to signal acquisition (e.g., multiple events, noisy records) or possible near-source effects (e.g., rupture directivity).265 201
