Speciale, Stefano
Preferred name
Speciale, Stefano
Email
stefano.speciale@ingv.it
Staff
staff
ORCID
15 results
Filters
Settings
The search returned 15 results
Now showing 1 - 10 of 15
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Sullo sviluppo della rete multiparametrica in Sicilia
This contribution illustrates the state of the art on the development of the multiparametric network in Sicily in the last three years. This region is wellknown for the strong earthquakes (M>6.5) which struck in historic time. However, the coverage of the seismic network developed in the last decades was not fully optimized to the need of the seismic surveillance. Since 2017, the group belonging to the National Earthquake Observatory (ONT) which operates in Sicily launched a developing plan of the preexisting seismic network in the framework of the project FISR “Sale Operative Integrate e Reti di Monitoraggio del futuro: l’INGV 2.0 (S.O.I.R.)”. Such update will end by the next years thanks to the project “GRINT Italian Research Infrastructure for Geosciences” in the framework of the “Programma Operativo Nazionale” (PON) of the Italian Ministry for the University and Research. This plan envisages both the upgrade of monitoring systems in the already existing nodes, and the integration of new nodes. The main objective is to build a multiparametric network which integrates the main seismic network, with the monitoring of other geophysical signals through the implementation of other sensors: accelerometers, geodetic GPS, radon detectors, and corner reflectors. We also illustrate the plan for the realization of a redundant network which could support the tasks of the main infrastructure in case of failure of the latter. Finally, we present some experimental urbanscale networks which in the future could support the main infrastructure.719 36 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Characterizing the subsurface structure and active faults of the Fucino Basin (Central Apennines) through integrated high-resolution seismic reflection and nodal ambient noise surveys
(Lausann : Frontiers Media S.A., 2013-, 2026-03-24); ; ; ; The Fucino Basin, the largest tectonic basin within the Central Apennines orogen, is bounded by normal faults that have controlled the deposition of over 1 km of Pliocene-Quaternary continental deposits above a Messinian substratum. Conflicting interpretations from legacy seismic profiles have hindered a full understanding of the basin’s stratigraphy, age, evolution, and fault systems, creating uncertainties for tectonic reconstructions, seismic response analysis and hazard assessment. To resolve these uncertainties, we acquired new high-resolution datasets through three complementary active–passive seismic surveys. These include seismic reflection profiles covering ∼10 km, a nodal ambient noise campaign deploying 258 short-period nodes over 16 km2, preceded by two pilot array tests, and finally a basin-wide ambient noise survey comprising 1-hour recordings at 42 sites. Our analysis focused on the San Benedetto and Trasacco Faults—responsible for the 1915, M7.1, Marsica earthquake—and the main depocenter (the Bacinetto) associated with the San Benedetto Fault. This paper presents experimental setup, recorded data, and initial findings that provide new insights into basin stratigraphy, fault geometry, and spatial distribution of the fundamental resonance frequency (f0). The seismic reflection data show excellent imaging quality, resolution, and penetration exceeding 1 km. The Bacinetto hosts up to 850–900 m of continuous lacustrine succession and lower fluvio-lacustrine deposits that record sustained syn-sedimentary slip along the San Benedetto Fault from the Late Pliocene to Recent times. No evidence is found for significant synthetic or antithetic faulting beneath the depocenter, contradicting earlier structural models. The intra-basin Trasacco Fault forms a clear basement step and localized sediment thickening that tapers northwestward f0 varies from 1 to 2 Hz near the basin margins to ∼0.2 Hz in the Bacinetto, reflecting progressive sediment thickening, whereas it varies abruptly across fault zones. f0 estimates from nodal and station data show good consistency.19 17 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The marine activities performed within the TOMO-ETNA experiment
The TOMO-ETNA experiment was planned in order to obtain a detailed geological and structural model of the continental and oceanic crust beneath Mt. Etna volcano and northeastern Sicily up to the Aeolian Islands (southern Italy), by integrating data from active and passive refraction and reflection seismic methodologies, magnetic and gravity surveys. This paper focuses on the marine activities performed within the experiment, which have been carried out in the Ionian and Tyrrhenian Seas, during three multidisciplinary oceanographic cruises, involving three research vessels (“Sarmiento de Gamboa”, “Galatea” and “Aegaeo”) belonging to different countries and institutions. During the offshore surveys about 9700 air-gun shots were produced to achieve a high-resolution seismic tomography through the wide-angle seismic refraction method, covering a total of nearly 2650 km of shooting tracks. To register ground motion, 27 ocean bottom seismometers were deployed, extending the inland seismic permanent network of the Istituto Nazionale di Geofisica e Vulcanologia (INGV) and a temporary network installed for the experiment. A total of 1410 km of multi-channel seismic reflection profiles were acquired to image the subsurface of the area and to achieve a 2D velocity model for each profile. Multibeam sonar and sub bottom profiler data were also collected. Moreover, a total of 2020 km of magnetic and 680 km of gravity track lines were acquired to compile magnetic and gravity anomaly maps offshore Mt. Etna volcano. Here, high-resolution images of the seafloor, as well as sediment and rock samples, were also collected using a remotely operated vehicle.1041 362 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Il primo OBS/H italiano per il monitoraggio e lo studio di faglie e vulcani sottomarini
(2006-11-28); ; ; ; L’Istituto Nazionale di Geofisica e Vulcanologia (INGV) ha testato con successo, nel luglio 2006, il primo Ocean Bottom Seismometer with Hydrophone (OBS/H) italiano (Fig. 1). Lo strumento, interamente progettato e realizzato all’Osservatorio di Gibilmanna del Centro Nazionale Terremoti, dopo aver superato i test in laboratorio, in camera iperbarica a 600 bar ed in mare a 3412 m di profondità, è stato deposto per 9 giorni (12-21/07/’06) sulla spianata sommitale del vulcano sottomarino Marsili a 790 m di profondità (Fig. 2) ed ha registrato 835 eventi tra cui un telesisma, 8 eventi regionali e circa 800 eventi vulcanici.La realizzazione dell’OBS/H si colloca nell’ambito dei progetti finanziati dalla convenzione tra l’INGV e il Dipartimento Nazionale della Protezione Civile (DPC), che ha avuto come obiettivo la costituzione di un primo pool strumentale, costituito da 7 OBS/H, da impiegare come rete mobile sottomarina in occasione di forti eventi sismici che dovessero interessare le coste e i mari italiani. Tale progetto si inquadra in uno scenario di ben più ampio respiro che vedrà nei prossimi anni l’estensione a mare della rete sismica nazionale, obiettivo strategico inserito nel piano triennale dell’INGV che porterà entro il 2008 alla realizzazione della prima stazione italiana real-time collegata a terra via radio, che verrà posizionata a circa 30 miglia a sud-est di Ustica, luogo in cui è stato localizzato il terremoto di Palermo del 6 settembre 2002. Il prototipo di OBS/H utilizzato nel test sul Marsili è stato equipaggiato con un sensore sismico Trillium 40s della Nanometrics ed un idrofono OAS E-2PD con banda di risposta piatta tra 0 e 5 kHz. I segnali emessi da questi strumenti sono stati registrati da un digitalizzatore a 21 bit a basso consumo (Geolon MLS della SEND) che ha acquisito i dati ad una frequenza di campionamento di 200 campioni al secondo, per sfruttare il più possibile l’ampia banda di risposta dell’idrofono, al fine di mettere in evidenza l’attività idrotermale del vulcano. Il sensore sismico è posto all’interno di una bentosfera di 17 pollici (sfera di vetro certificata per operazioni sino a 6000 m di profondità), installato su una base autolivellante controllata elettronicamente. Il digitalizzatore e le batterie sono poste all’interno di un contenitore in ERGAL 7075. Per il recupero dello strumento a fine esperimento, è stato utilizzato uno sganciatore acustico IXSEA AR816S-MR opportunamente modificato dal personale dell’osservatorio di Gibilmanna per attivare, una volta ricevuto il segnale di “release”, un sistema di sgancio elettrolitico (burn-wire). Per deposizioni di lungo periodo, sino ad uno o due anni in relazione al tipo di sismometro a bordo, l’OBS/H sarà dotato della strumentazione indicata nella Tab. 1 Attualmente è in fase di progettazione un’evoluzione dello strumento che mira a dotarlo di un digitalizzatore a 24 bit, di un sistema di comunicazione basato su modem acustico e di un PC industriale con processore ARM grazie al quale, nell’eventualità di interventi della rete mobile sottomarina, sarà possibile estrarre tracce degli eventi verificatisi per una più accurata localizzazione dell’epicentro senza che si renda necessario il recupero dello strumento. Inoltre, mediante l’implementazione di algoritmi di trigger, sarà possibile l’utilizzo dell’OBS/H all’interno di un sistema di allerta tsunami in comunicazione con una boa di superficie collegata al centro di controllo via satellite.184 704 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Il primo OBS/H italiano per il monitoraggio e lo studio di faglie e vulcani sottomarini
(2006); ; ; ; L’Istituto Nazionale di Geofisica e Vulcanologia (INGV) ha testato con successo, nel luglio 2006, il primo Ocean Bottom Seismometer with Hydrophone (OBS/H) italiano (Fig. 1). Lo strumento, interamente progettato e realizzato all’Osservatorio di Gibilmanna del Centro Nazionale Terremoti, dopo aver superato i test in laboratorio, in camera iperbarica a 600 bar ed in mare a 3412 m di profondità, è stato deposto per 9 giorni (12-21/07/’06) sulla spianata sommitale del vulcano sottomarino Marsili a 790 m di profondità (Fig. 2) ed ha registrato 835 eventi tra cui un telesisma, 8 eventi regionali e circa 800 eventi vulcanici.222 174 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Urban Seismic Network Based on MEMS Sensors: The Experience of the Seismic Observatory in Camerino (Marche, Italy)
Urban seismic networks are considered very useful tools for the management of seismic emergencies. In this work, a study of the first urban seismic network in central Italy is presented. The urban seismic network, built using MEMS sensors, was implemented in the urban district of Camerino, one of the cities in central Italy with the greatest seismic vulnerability. The technological choices adopted in developing this system as well as the implemented algorithms are shown in the context of their application to the first seismic event recorded by this innovative monitoring infrastructure. This monitoring network is innovative because it implements a distributed computing and statistical earthquake detection algorithm. As such, it is not based on the traces received by the stations from the central server; rather, each station carries out the necessary checks on the signal in real time, sending brief reports to the server in case of anomalies. This approach attempts to shorten the time between event detection and alert, effectively removing the dead times in the systems currently used in the Italian national network. The only limit for an instant alarm is the latency in the tcp/ip packages used to send the short reports to the server. The presented work shows the infrastructure created; however, there is not enough data to draw conclusions on this new early warning approach in the field, as it is currently in the data collection phase.293 157 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Report on the gravimetric, magnetometric, bathymetric activities during Cruise PANSTR10 with R/V Urania: Panarea and Stromboli, Aeolian Islands, 2010-02-05 - 2010-02-15.
We present the shipboard activities and preliminary results of Cruise PANSTR10((2010-02-05 2010-02-15)) with R/V Urania. The cruise was scheduled to acquire high resolution magnetometric and gravimetric data on the Panarea and Stromboli volcanic edifices. In addition to this, swath bathymetry and CTD casts were obtained, and five OBS were launched N of Alicudi and on the lineament Stromboli-Marsili, aiming at collecting active and passive seismological data in the Aeolian and Calabrian Arcs.305 63 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The Stromboli geophysical experiment. Preliminary report on wide angle refraction seismics and morphobathymetry of Stromboli Island (Southern Tyrrhenian Sea, Italy) based on integrated offshore-onshore data acquisition (Cruise STR06 R/V URANIA)
(2007-04); ; ; ; Cruise STR06 on R/V Urania was performed in the framework of the ”INGV - DPC V2 - Monitoring and research activity at Stromboli and Panarea - Unit V2/03”, and resulted as a joint initiative between CNR (IAMC, Napoli and ISMAR, Bologna), INGV (Roma2, Osservatorio Vesuviano, Catania, Gibilmanna-CNT), University of Firenze and DPC, aiming to produce a seismic tomography of the Stromboli volcano, South Eastern Tyrrhenian Sea [Fig.1], and have insights into its 2-D structure and magma chambers. Cruise work plan was designed to extend at sea the existing Seismographic Network, complemented by several mobile stations, and to generate seismic shots by air-gun tuned array. 10 OBS were deployed around Stromboli, along the NE, SE and SW flanks of the volcano, according to (a) morphobathymetric analysis of available and newly produced DTMs, (b) modeling and (c) optimal lineaments with on-land recording stations. Seismic shots along radial and circle lines were obtained by a 4 GI-GUN 105+105 C.I. tuned array, while the absolute shot time was recorded at the resolution of ms. A request for ship time of R/V Uraniawas presented by IAMC, and a period of 7 days, including 2 day of transit was assigned to the project by CNR and scheduled for late November 2006. Cruise STR06 started in Naples 2006-11-27 and ended in Naples 2006-12-06. This paper reports the shipboard activities during the cruise STR06 on R/V Urania and some preliminary results regarding also the onshore activities carried out in order to perform the Stromboli geophysical experiment. A description of the ship, equipment and their usage is given thereinafter, along with details of the general settings, performances and some scientific and technical results.424 1342 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , “Messina 1908-2008”: Progetto di ricerca integrato per l’area Calabro - Peloritana. L’esperimento di sismica passiva
(2010-08-03); ; ; ; Il 28 dicembre 1908 un forte terremoto colpì duramente le città di Messina e di Regg io Calabria e molteplici centri abitati limitrofi. L’evento sismico di Mw=7.1 generò un maremoto e causò circa 100.000 morti. Durante il 2008 numerose sono state le iniziative per rievocare tale importante terremoto che è ricordato nella storia come il più forte avvenuto in Italia. Tra le iniziative promosse dall’Istituto Nazionale di Geofisica e Vulcanologia vi è il progetto di ricerca “Messina 1908-2008” le cui finalità sono far convergere i dati sismici e geodetici g ià a disposizione dei singoli gruppi di ricerca in un’unica banca dati e nel contempo promuoverne l’acquisizione di nuovi. In questo rapporto è descritto l’esperimento di sismica passiva integrato mare-terra iniziato ad ottobre 2007 e ter minato nel gennaio 2010 avente l’obiettivo di acquisire nuovi dati di alta qualità e dettaglio per ottenere una migliore definizione della microsismicità locale. Ciò consentirà di raggiungere una migliore comprensione di come inter ag iscano il processo di subduzione e le dinamiche superficiali nell’area dell’arco Calabro Peloritano ed in particolare nello stretto di Messina.444 327 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Monitoring Earthquake through MEMS Sensors (MEMS project) in the town of Acireale (Italy)
We introduce the realization of the first European real-time urban seismic network based on Micro ElectroMechanical Systems (MEMS) technology. The project is called Monitoring Earthquake through MEMS Sensors (MEMS) and encompass the installation of about 100 seismic station in the municipality of Acireale (Sicily, Italy). The stations, specifically designed and assembled, are equipped with a triaxial MEMS accelerometer, and gyroscope and GPS. In this paper we present the characteristics of the station and of the network. The main objective of the network is a rapid, post-earthquake disaster assessment through the automatic production of shake maps. The network also allow the implementation of an automatic recognition system for damage assessment from remotely piloted aircraft, and of a site-specific Earthquake Early Warning system.77 9
