Skip to main content
The search returned 37 results
Now showing 1 - 10 of 37
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    First INGV BBOBS campaign in the Ionian sea: crustal velocity model inferred from seismic data recorded

    In May 2007, within the monitoring activities carried out in cooperation with the Italian National Civil Protection Department (DPC), and within the European project NERIES (activity NA6), the Gibilmanna OBS Lab of the INGV has deployed three Broad Band Ocean Bottom Seismometers (BBOBS) in the southern Ionian Sea at 3500-4000 meters of depth. The BBOBS deployed were equipped with a Nanometrics Trillium 120P seismometer and a Cox-Webb 500s-2 Hz Differential Pressure Gauge (DPG). A 21 bits four channel digitizer (SEND Geolon MLS) recorded data at 100 sps. During the nine months of the experiment, the OBS’s array recorded more than 400 events: about 90 are teleseismic events, more than 200 are regional events also recorded by the seismic networks onshore, finally more than 100 events were not recorded by any seismic networks on land. We used both the regional and teleseismic events recorded by seismometer and DPG to construct a simple velocity model for the Ionian crust. Teleseismic receiver function were computed from high s/n teleseismic records and dispersion curves were extracted for Rayleigh wave recorded. We inverted both the receiver function and Rayleigh dispersion curves data-set to constrain a 1D S-velocity model for the Ionian crust. Moreover a minimum 1‐D velocity P‐wave model is estimated by inversion of the first P-wave arrivals time of the regional events.
      237  556
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    SISMICITÀ DELL’AREA IONICA: UN’IMMAGINE OTTENUTA DA DATI OBS (NERIES, NA6)

    Per meglio comprendere e monitorare i processi sismo-tettonici in atto nell’area Euro- Mediterranea, negli ultimi decenni si è assistito allo sviluppo in quest’area di oltre un centinaio di reti di monitoraggio sismico a terra. Tuttavia il monitoraggio sismico della regione Euro- Mediterranea tramite sole stazioni a terra è di difficile attuazione; numerosi sono infatti gli eventi sismici con epicentro in mare. L’effetto dell’insufficiente copertura in molte aree prevalentemente offshore delle reti sismiche produce un immagine della sismicità Mediterranea incompleta e distorta. Uno degli obbiettivi del progetto NERIES, attività NA6, è l’estensione offshore delle reti sismiche tramite l’impiego di OBS (Ocean Bottom Seismometer). Nel 2007, all’interno del suddetto progetto, l’OBS Lab (CNT, INGV) ha deposto tre OBS in prossimità di uno dei tre siti chiave proposti da ESONET (European Sea Floor Observatory Network) nello Ionio Meridionale (D’Anna et al., 2008a, 2008b, 2008c, 2008d). Lo Ionio Meridionale e le aree limotrofe, sismicamente molto attive sono attualmente soggette ad una rapida deformazione; i diversi modelli geodinamici del Mediterraneo propongono per la crosta ionica una probabile origine oceanica (Catalano et al., 2001; Finetti e Del Ben, 2005). L’attività sismica, perlopiù superficiale, è in gran parte localizzata lungo gli archi Ellenico, Egeo e Calabro, la Sicilia orientale e la scarpata Ibleo-Maltese. La distribuzione della sismicità e l’evoluzione geodinamica dell’area ionica sono in gran parte determinati dalla convergenza della placca Africana e Euroasiatica (Finetti e Del Ben, 2005). La prima campagna OBS ha permesso di raccogliere dati sismologici per oltre 9 mesi da tre diversi OBS; la seconda conclusasi nel febbraio 2009 ha aggiunto al database sismologico della stazione OBS A3 ulteriori 10 mesi di registrazione in continuo. Durante le 2 campagne l’array di OBS ha registrato oltre 1000 eventi, di cui circa 200 telesismi, 800 eventi regionali e oltre 200 eventi non localizzati da stazioni a terra. In Fig. 1 sono riportati i segnali di velocità e di pressione registrati dalla stazione OBS A3, di un evento telesismico di magnitudo pari a 7.2 con epicentro nella regione dello Xinjiang-Xizang. In una fase preliminare si è voluto valutare l’effetto di queste stazioni sulle performance di localizzazione della Rete Sismica Nazionale applicando il metodo SNES (Seismic Network Evaluation through Simulation, D’Alessandro et al., 2009). Per il calcolo delle mappe SNES è stato stimato il valore medio del rumore sismico sulla componente verticale delle tre stazioni OBS. Le mappe dell’errore sulla stima dell’ipocentro di Fig. 2 sono state calcolate come il raggio della sfera equivalente dell’ellisoide di confidenza al 95% (Radious of Equivalent Spere, RES), per magnitudo pari a 2.5 e 3, fissando la profondità ipocentrale a 15 km. La mappa di Fig. 2 mostra come un’estesa area dello Ionio meridionale risulti meglio coperta in seguito all’installazione delle tre stazioni OBS; in particolare è evidente un notevole miglioramento del RES che in alcune aree prima non coperte scende sotto il valore di 2 km. Gli eventi ben localizzati dalle reti dell’INGV, dell’EMSC, dell’USGS e dalla rete sismica nazionale greca sono stati utilizzati per determinare gli azimuth delle componenti orizzontali degli OBS attraverso un’analisi di correlazione dei back-azimuth ottenuti tramite l’analisi di polarizzazione dei segnali 3C degli OBS e i corrispondenti back-azimuth dedotti dalle loro localizzazioni (D’Alessandro et al., 2008). Successivamente l’analisi di polarizzazione e lo studio dei tempi di arrivo delle onde P ed S ha permesso di effettuare una localizzare approssimativa di molti degli eventi non localizzati dalla rete sismica nazionale. Per un’accurata stima della distanza epicentrale è stato necessario ricavare un modello ottimale di velocità delle onde P ed S per l’area in esame. Per definire un modello 1D di velocità delle onde P per l’area ionica, sono stati invertiti i tempi di arrivo di oltre 300 fasi P degli eventi regionali registrati. Dell’intero dataset sono stati scelti solamente gli eventi con RMS inferiore a 0.3s e errore standard di localizzazione minore di 3.0 km. Sulla base delle informazioni attualmente disponibili per l’area del bacino ionico e delle aree circostanti, sono stati inoltre scartati gli eventi con ipocentro superficiale in aree intensamente deformate; per queste aree sono state selezionati solo gli evensorgente alla stazione è stato risolto in maniera analitica per i raggi rifratti e tramite la tecnica dello “shooting” per le onde dirette. Nella soluzione del problema diretto è stata considerata anche la profondità delle stazioni. Il modello di velocità delle onde S è stato ottenuto invertendo le curve di dispersione del modo fondamentale delle onde di Rayleigh. L’inversione congiunta dei tempi di viaggio e delle curve di dispersione ha permesso di definire un unico modello 1D di velocità. Il modello ottenuto e i risultati della localizzazione saranno esposti durante il convegno.
      166  494
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    INGV Broad Band Ocean Bottom Seismometers deployed in the Ionian Sea

    In May 2007, within the monitoring activities carried out in cooperation with the Italian National Civil Protection Department (DPC) and European NERIES project (activity NA6), INGV has deployed three Broad Band Ocean Bottom Seismometers in the southern Ionian Sea at 3500/4000 meters of depth. The OBS’s are equipped with a Nanometrics Trillium 120p seismometer, a Cox-Webb Differential Pressure Gauge and a 21 bits SEND Geolon-MLS digitizer. The three OBS’s, entirely developed at the Gibilmanna Geophysical Observatory of the INGV National Earthquake Center (CNT), are part of a pool of eight ready to deploy instruments and they are the first Italian OBS’s taking part in a long term experiment: two of them will be recovered by February 2008, whereas the third, in the deep Ionian Sea, will be replaced every year, until May 2010, to accomplish the continuous long-term seismic monitoring task of the EU NERIES project. The area selected for the deployment is a region of high scientific interest for several reasons: i) there are no seismological data on the structure of the Ionian lithosphere; ii) the level and features of the seismicity of the area between the Hyblean-Malta fault system and the accretionary prism of the Calabrian Arc are unknown. This experiment allows us to test the pressure waves detection system that will be implemented in the Tsunami Warning System INGV is developing within the IOC-UNESCO “NEAMTWS” (North-East Atlantic, Mediterranean and connected seas Tsunami Warning System). In this poster we describe the technical features and the performance of the OBS’s, the deployment campaign, and some seismic data recorded.
      158  865
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Project of a Near-Real-Time Sismo-acoustic Submarine Station for offshore monitoring (NRTSSS)

    The INGV seismic network ensures reliable and continuous monitoring of the Italian territory. However, the peculiarity of the Italian peninsula, characterised by an intense offshore geodynamic and seismic activity, requires the extension of the seismic monitoring to the sea. The aim of this project is: - to identify bottleneck is related to the construction, installation and use of underwater seismic station; - to define the most appropriate and low-cost architecture to guarantee the minimum functionality required for a seismic station. In order to obtain reliable seafloor seismic signals integrated to land-based network, the requirements to be fulfill are: - an acceptable coupling with the seabed; - the orientation of the components with respect to the magnetic North and to the verticality; - the correct time stamp of the data; - the data transfer to the land for the integration. Currently, the optimal solution for offshore seismic station is a cable connection to power and real-time data transfer, like the case of Western Ionian Sea cabled observatory, one of the operative node of the EMSO research infrastructure (European Multidisciplinary Seafloor and water column Observatory, http://emso-eu.org). But in the Mediterranean many seismic areas are located a few tens-hundreds of miles from the coast and cabled solutions are not feasible essentially for economic reasons. For this kind of installations EMSO research infrastructure foresees no-cabled solution, that requires a surface buoy deployed in the vicinity seafloor modules.This project plans to develop a surface buoy equipped with autonomous power supply system to power also the seafloor platforms and two-way communication system enabling the data transfer through latest generation of broadband radio communication or satellite link. All the components of the prototype system are described.
      212  589
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Analisi spettrale parametrica e di polarizzazione applicate agli eventi sismici registrati sul vulcano sottomarino Marsili

    (2007-11-14) ; ; ; ;
    D'Alessandro, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma2, Roma, Italia
    Nel luglio 2006, nell’ambito della campagna di ricerche PRO.ME.TH.E.US (PROgram of Mediterranean Exploration for THermal Energy Use), l’OBS Lab dell’Osservatorio Geofisico di Gibilmanna dell’INGVCNT, ha deposto un prototipo di OBS/H sulla sommità del vulcano sottomarino Marsili (39° 16,383’ lat. Nord, 14° 23,588’ long. Est.) alla profondità di 790 m (D’Anna et alii, 2007); lo strumento ha registrato l’attività sismica del vulcano dal 12 al 21 luglio 2006. L’OBS/H era equipaggiato con un sismometro Trillium 40s della Nanometrics e un idrofono OAS E-2PD. La digitalizzazione è stata effettuata da un convertitore A/D a 21 bit a quattro canali (SEND Geolon MLS) e i segnali sono stati campionati ad una frequenza di 200 c/s (D’Anna et alii, 2007).In una prima fase di studio D’Alessandro et alii (2006) hanno individuato, nel segnale acquisito, la presenza di una elevata attività sismica (oltre 1000 eventi registrati in 9 giorni) legata probabilmente all’attività del vulcano Marsili oltre a eventi tettonici e forme d’onda transitorie di origine non sismica. In base ad analisi spettrali non parametriche, l’attività registrata era stata suddivisa in: eventi noti in letteratura come VT-B (Volcanic-Tectonic event, type B) che si manifestano in sciami, eventi ad alta frequenza legati a probabile attività idrotermale ed eventi classificabili come “Tornillo” o LPE (Long- Period Event) probabilmente generati da fenomeni di risonanza legati ad attività magmatica (Chouet, 1996). Al fine di caratterizzare con idonei parametri quantitativi i segnali appartenenti ai gruppi individuati e fare delle ipotesi sui diversi meccanismi sorgente, sono state successivamente eseguite analisi spettrali parametriche e di polarizzazione, che sono oggetto di questo lavoro. Rispetto all’analisi di Fourier, l’analisi spettrale parametrica permette di ottenere una migliore risoluzione, quando il segnale da analizzare presenta breve durata. Noi abbiamo applicato tale tipo di analisi agli eventi classificabili come Tornillo. Tali eventi sono generalmente quasi-monocromatici e presentano un inizio di tipo impulsivo, seguito da un lento e graduale decadimento in ampiezza. La descrizione delle frequenze di oscillazione di un Tornillo è di fondamentale importanza per stimare le caratteristiche della sorgente. Un metodo ad alta risoluzione spettrale basato sulle proprietà di un sistema dinamico è stato sviluppato da Kumazawa et alii (1990). Questo metodo chiamato Sompi è stato successivamente esteso da Yokoyama et alii (1997) alle equazioni AR non omogenee. Noi abbiamo utilizzato quest’ultimo metodo, implementando la procedura di Nakano et alii (1998), per analizzare i Tornillo ed attribuirgli una frequenza complessa.L’analisi di polarizzazione, risolvendo il problema agli autovalori associato alla matrice di covarianza dei segnali relativi alle tre componenti del moto, permette di definire l’orientazione e la lunghezza degli assi dell’ellissoide di polarizzazione associato alla finestra temporale del segnale sismico presa in esame. Al fine di migliorare la stima degli attributi di polarizzazione, la matrice di covarianza è stata corretta per la presenza di rumore sismico, sotto l’ipotesi di stocasticità e stazionarietà del rumore stesso. L’analisi di polarizzazione è stata applicata a oltre 200, tra gli eventi VT-B con maggiore energia, per individuare attraverso la direzione di polarizzazione delle fasi P (linearmente polarizzate) eventuali direzioni prevalenti di provenienza e quindi l’esistenza e ubicazione di volumi sismogenetici.
      238  347
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    SMART Subsea Cables for Observing the Ocean and Earth: Update

    JTF SMART Subsea Cables (Joint Task Force, Science Monitoring And Reliable Telecommunications, 1) is working to integrate environmental sensors for ocean bottom temperature, pressure and seismic acceleration into submarine telecommunications cables. The purpose of SMART Cables is supporting climate and ocean observation, sea level monitoring, observations of Earth structure, and tsunami and earthquake early warning and disaster risk reduction. Recent advances include regional SMART pilot systems that are the first steps to transocean and global implementation. Building on the OceanObs’19 conference and community white paper (2), an overview and description of the status of ongoing projects will include: The InSea wet demonstration project off Sicily at the EMSO Western Ionian Facility; Gondwana-3 connecting New Caledonia and Vanuatu; Indonesia’s Makassar Strait systems working toward systems for the Sumatra-Java megathrust zone; and the CAM-2 triangle system connecting Lisbon, Azores and Madeira. Observing system design studies are elaborated for these and other regions, e. g., the Pacific. Funding reflects a blend of government, development bank, and commercial contributions. In addition to notable scientific and societal benefits, the Telecom mission of societal connectivity will benefit as well, as environmental awareness improves both individual cable system integrity as well as that of the overall global communications network
      51  102
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The new INGV broadband OBS/H: test results on submarine volcano Marsili and future developments.

    (2007-04-18) ; ; ; ;
    D'Anna, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    In July 2006, INGV (Istituto Nazionale di Geofisica e Vulcanologia) successfully deployed on the flat top of the submarine Marsili volcano, the first Italian OBS/H (Ocean Bottom Seismometer with Hydrophone), entirely developed at the Gibilmanna Geophysical Observatory within a project funded by an agreement between Italian National Civil Protection Department (DPC) and INGV. In this short deployment the OBS/H was equipped with a Nanometrics Trillium 40s seismometer and an OAS E- 2PD Hydrophone. A 21 bits four channel digitizer (SEND MLS) recorded data at 200 sps to exploit, as well as possible, the wide flat response of the hydrophone (0-5 KHz). For long-term deployments, the instrument will be provided with Cox-Webb 500s-2 Hz differential pressure gauge and Nanometrics Trillium 120s or Guralp CMG40TOBS and will record data at 50 sps, for as long as one or two years respectively, depending on the seismic sensor. Most of the recorded events (about 800) seem to be associated with the active nearby Marsili volcano. The instrument, during the 9 days of the test at a depth of 790 m, recorded 835 volcano-tectonic events, classifiable in 6 different categories: 1 teleseismic event (Java 2006/07/17, Mw=7.2), 8 located regional tectonic events, 9 not located local tectonic events, 705 low frequency volcanic events, 84 high frequency volcanic events, 26 “Tornillo” and 2 probable rockfall events. Spectral analysis shows, in the first 7 days of the deployment, an evident sequence of low energy events superimposed on the continuous background volcanic tremor, with dominant frequencies between 2 and 6 Hz, known in literature as VT-B (Volcanic-Tectonic event, type B) and related to shallow hypocenters (above 1-2 km). In the last two days of operation, the hydrophone recorded high frequency events, with dominant frequencies between 40 and 90 Hz; this kind of event could be associated with hydrothermal activity. In March 2007, three INGV OBS/H will be deployed in the southern Ionian sea, at different distances from the Malta escarpment, within the European project NERIES (Network of Research Information Infrastructures for European Seismology). At present, we are planning a further improvement of the instrument, equipping it with a 24 bits digitizer and a communication system based on an acoustic modem and a low power consumption PC with ARM processor. In this way, it would be possible to pick up events traces from the OBS on the sea bottom, without recovering it. Furthermore, the acoustic link with a buoy, in its turn satellite linked with an on shore control centre, in association with triggering algorithms, could be employed to insert the INGV OBS/H in a tsunami warning system.
      203  535
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Analysis of the seismo-volcanic and hydrothermal activity recorded on the Marsili submarine volcano

    (2011-09-17) ; ; ;
    Luzio, Dario
    ;
    D'Alessandro, Antonino; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    Marsili is a back-arc volcano with a dominant tholeitic petrochemical affinity. This seamount, having an elevation of about 3000 m above the sea floor, an approximate length of 60 km in a NNE-SSW direction and a mean width of 25 km, is the biggest European volcano. The opening of the Marsili basin was related to a sharp acceleration of the roll-back of the Ionian lithosphere subducting below the Southern Tyrrhenian Basin. On the basis of all the geophysical, geological and petrological information knower, Marsili volcano can be considered as being the key needed to understand the dynamics of spreading and back-arc lithosphere formation in this Tyrrhenian sector. However, despite its importance in the Mediterranean geodynamical contest the seismo-volcanic and hydrothermal activity of this seamount remained little known. For this reason in 2006, in the framework of PRO.ME.TH.E.US project (Program of Mediterranean Exploration for Thermal Energy Use), founded by PRAMA s.r.l (Italy) (now Eurobuilding SpA), a multi-disciplinary research was conducted on the Marsili volcano area. In the framework of this project the INGV’s staff placed a broadband OBS/H (Ocean Bottom Seismometer with Hydrophone) on Marsili’s flat top (39° 16,383’ lat. Nord, 14° 23,588’ long. Est.) at a depth of 790 m. For this experiment the OBS/H operated from July 12th to 21st 2006. In only 9 days the submarine seismic station recorded more than 1000 seismo-volcanic and hydrothermal signals. By comparing the signals recorded with typical volcanic seismic activity, we group the recorded signals into: Volcano-Tectonic type B (817 VTB) events, occurrences of High Frequency Tremor (159 HFT) and quasi-monochromatic Short Duration Events (32 SDE). The small-magnitude VT-B swarms, having a frequency band of 2 - 6 Hz and a mean length of about 30 seconds, were almost all recorded during the first 7 days. During the last 2 days, the OBS/H mainly recorded HFT events with frequencies of over 40 Hz and few minutes length. On February 14th 2010, about three years and half after the first monitoring campaign another OBS/H was deployed in the same point for a long monitoring campaign (9 mouths). For this experiment the OBS/H was equipped with a Guralp CMG40T-OBS 3C seismometer, with flat transfer function in the band 60 s - 100 Hz, housed in a glass sphere with an autoleveling system that allows the sensor leveling in a range of ± 70° from the vertical. To monitor high frequency seismic and pressure signals the OBS/H was also equipped with a HTI-04- PCA/ULF Hydrophone, with a flat transfer function in the band 100s - 8 kHz. Both the signals were recorded by a 4 channels 21 bits SEND Geolon-MLS datalogger, at a sampling frequency of 200 Hz. During the nine months of the monitoring experiment the OBS/H recorded some thousand of little magnitude events very similar to that of the first experiment. The signals recorded in both the experiments were analyzed using polarization, spectral and clustering techniques. Both methods and results will be presented during the workshop.
      211  147
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Il nuovo OBS/H dell’INGV

    In 2005, thanks to the 3-year agreement between Dipartimento Nazionale della Protezione Civile (DPC) and Istituto Nazionale di Geofisica e Vulcanologia (INGV) - Centro Nazionale Terremoti (CNT), the project of the first Italian “Ocean Bottom Seismometer with Hydrophone” (OBS/H) for long-term deployment was developed at the OBS Lab of the Gibilmanna Observatory (Sicily). The drawing of the instrument started in January 2005 and, after 18 months, the prototype was ready for test in laboratory, in shallow and deep water. Afterwards, the first OBS/H was tested during an oceanographic campaign on the Marsili submarine volcano, from the 10th to the 21st of July 2006.More than 1000 events of several kinds were recorded: 817 VTB (Volcano Tectonic events, B-type), 159 HF (High Frequency events), 53 SDE (Short Duration Event), 8 regional events localized by INGV land network, 10 not localized events, 1 teleseismic event an 2 rockfall events. The INGV OBS/H are equipped with: - Nanometrics Trillium 120p seismometers (theoretical flat response between 120s and 175 Hz) installed in a 17 inches glass sphere on a Nautilus gimbal for the leveling or Guralp CMG40T-OBS (flat response between 60s and 100 Hz); - Cox-Webb Differential Pressure Gauge (bandwidth 500s-2Hz) or OAS E-2PD hydrophone (0-5kHz); - 21 bits, 4 channels SEND Geolon-MLS digitizer with sampling frequency up to 200 Hz.
      262  442
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Evidence of persistent seismo-volcanic activity at Marsili seamount

    (2012) ; ; ;
    D'Alessandro, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    ;
    Mangano, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    The Marsili, the biggest European volcano, can be considered as being the key needed to understand the dynamics of spreading and back-arc lithosphere formation in the Tyrrhenian sector (Marani et al., 2004, and references therein). Despite of its dimensions, due to its geographical position, it is very difficult to monitor (D'Alessandro et al., 2011) and it still remains little known. In 2006 the INGV staff deployed a broadband OBS/H (Mangano et al., 2011) on the Marsili’s flat top at a depth of about 790 m. In only 9 days, the instrument recorded about 800 seismo-volcanic events (D'Alessandro et al., 2009). This experiment, for the first time, revealed an intense seismo-volcanic activity of the Marsili. However, the short duration of the experiment didn’t allow to characterize, in an exhaustively way, the seismo-volcanic activities currently in act on the seamount. For this reason, on February the 14th 2010 another OBS/H was deployed in the same point for a long time experiment (9 months). During the monitoring campaign, the submarine station recorded some thousands of local little magnitude events. The entire data set was classified, on the basis of the time and frequency domain appearances following Wasserman (2002); we recognized 589 Volcano-Tectonic type A (VT-A) events and 1952 Volcano-Tectonic type B (VT-B) events (Fig. 1), measuring their local magnitude following Havskov et al. (2003). The seismogram of a typical VT-A event is dominated by P and S phases and by a short coda (Fig. 1a). These events are characterized by P phases with impulsive and high-amplitude onsets. The spectrogram shows broadband body phases with very high frequency and energy content extending up to 80 Hz (Fig. 1c). The VT-A events recorded have local magnitude between 0.5 and 3 and time length between 40 and 70 s. For these earthquakes, separation of P and S waves is clear and TS-TP is between 0.35 and 0.55 s. Their average recurrence time is about 2-3 events a week, with moderate variation in the observed period. The VT-B events are characterized by P phases with emergent and low-amplitude onsets (Fig. 1b ). The waveforms don't show any clear S wave arrival and they are featured by long coda (Fig. 1b). The VT-B events have time length between 15 and 40 s and local magnitude between -0.5 and 1.5. Their spectrograms shows a narrow frequency content (Fig. 1d). The time distribution of VT-B occurrence shows periods of moderate activity (some events a week) alternating with periods of intense activity (70 events a day). From Fig. 1f is also clear a time cyclic process and an upward trend in the VT-B activity. An increase in VT-B activity is often reported in some active volcanoes before significant eruptions. The observation of VT swarms on the Marsili volcano strongly suggest that it is still active. Further, it should not be ignored that potential volcanic eruptions could efficiently generate tsunami along the nearby coastlines.
      308  415