Skip to main content
The search returned 18 results
Now showing 1 - 10 of 18
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Geophysical and geochemical multi-method investigations for reconstructing subsurfaces, alluvial sedimentology, and structural geology (Tiber valley, Rome)

    Geophysical and geochemical methods were applied to detect the subsurface setting of an Upper Pleistocene-Holocene fluvial incised-valley where a travertine body intercalates between alluvial deposits of the Tiber river (central Italy), at Prima Porta (close to Rome). This study allowed us to provide more information regarding the local stratigraphic architecture and structural features, as a reference analogue to similar settings: i.e., hard (stiff) lithic travertines buried below fine and loose alluvial plain covers. Two Electrical Resistivity Tomography (ERT) profiles, interpreted and calibrated using previously collected litho-stratigraphic data from a borehole, identified a massive body, with a relatively high resistivity that correlates with the 21 travertine deposit of Prima Porta. In addition to ERT, ambient noise measurements, processed with the HVSR technique and 2D array, and seismic refraction tomography were carried out; HVSR data were highly consistent with ERT results and allowed to discriminate between the travertine body and the silty-sand channels and overbank deposits, which were attributed to the Tiber river’s evolution during Upper Pleistocene-Holocene. Finally, the presence of cracks/fractures could be inferred, as suggested by slight polarisation effects recorded in the HVSR results and soil-gas anomalies.
      46  640
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismic microzonation in a complex volcano-tectonic setting: the case of northern and western Ischia Island (southern Italy)

    On August 21, 2017, the volcanic island of Ischia was struck by a Mw 3.9 (http://cnt.rm.ingv.it/event/16796811) earthquake which caused two victims and heavy damages on wide portions of the Casamicciola Terme, Lacco Ameno and Forio municipalities. Following the Decree 1/2018 of the Government Commission for the reconstruction of damaged areas of Ischia Island, a Grade 3 Seismic Microzonation study was committed by each municipality to private consultants, who were scientifically supported by a multidisciplinary team of geologists, geophysicists and geotechnical engineers from CNR, INGV and University of Naples “Federico II”. The existing data from previous geological and geotechnical investigations were integrated with the results of new geo-lithological surveys and geophysical measurements (HVSR, MASW, Down hole tests) carried out by the consultants. The whole amount of data was quality checked, homogenized and collected in a SQLite/SpatiaLite geodatabase using a QGIS open source software by the support team. A geo-lithological map of northern and western sides of the island was then produced, and the results of routine geophysical tests were coupled with those of seismic 2D ambient vibration arrays, to obtain shear wave velocity profiles (several hundreds of meters deep) down to the seismic bedrock, made of lithic tuffs and lavas, and to define its buried morphology. This in turn enabled to draw a map of seismically homogeneous microzones of the entire study area. Cyclic torsional shear tests were carried out on 10 undisturbed soil samples, mainly taken from epiclastic cover deposits, to characterize their non-linear behavior to be adopted for seismic response analyses. These latter were carried out along 1D profiles characterizing each microzone and along selected 2D cross sections running from the Mount Epomeo to the coast. The dynamic analyses allowed to detect and map areas characterized by variable amplification factors, of spectral accelerations throughout different ranges of periods (0.1- 0.5s, 04.-0.8s, 0.7-1.1 s). The zones most prone to site amplification are those corresponding to localized graben-like depressions at the toe of Mount Epomeo, such as Maio neighborhood of Casamicciola, where thickened epiclastic covers are entrenched into blocks of uplifted bedrock and where a combination of 1D stratigraphic amplification and 2D reflection and diffraction effects is expected.
      54  131
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Site Amplifications in the epicentral area of the 2016, M 6, Amatrice earthquake (Italy)

    The first mainshock (Mw 6.0) of the 2016 Central Italy seismic sequence, severely struck the Amatrice village and the surrounding localities. After a few days, some Italian Institutions, coordinated by the “Center for Seismic Microzonation and its applications”, carried out several preparatory activities for seismic microzonation of the area. A temporary seismic network was installed that monitored about 50 sites in epicentral area. The network produced a huge amount of records in a wide range of magnitude up to Mw 6.5. For about half of the recording stations, detailed site characterization was undertaken, encompassing single station noise measurements and S-wave velocity profiles. The geological and geophysical data together with the collected dataset of seismic signals were exploited to investigate the site response of selected stations. Significant amplifications are found in the correspondence of several sites that experienced a high level of damage (Imcs >IX), mainly at short and intermediate periods
      134  218
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    2D site response analysis of a cultural heritage: the case study of the site of Santa Maria di Collemaggio Basilica (L’Aquila, Italy)

    Abstract The Santa Maria di Collemaggio Basilica is an important cultural heritage site and exemplifies Romanesque-Gothic art in the Abruzzo region (central Italy). Erected in the second half of the XII century, the Basilica was severely damaged during the April 6, 2009 L’Aquila earthquake (MW 6.1). In particular, the area of the transept collapsed causing the dome to fall. A refined two-dimensional (2D) geotechnical model was built representing a section that includes the Basilica, in order to better understand the soil response of the Basilica site. The subsoil model was constrained using the geophysical and geotechnical data collected from the seismic microzonation studies, the reconstruction of private damaged buildings and other technical and scientific studies realized in the L’Aquila basin and in the area of the Basilica before and after L’Aquila earthquake. 2D site response analyses were performed to verify the presence of local site effects by comparing simulated versus experimental transfer functions. Moreover, a frequency–wavenumber (f– k) analysis was executed with the aim of evaluating the occurrence of surface waves generated within the basin. 2D seismic effects involve significant amplification in the period range of engineering interest, therein providing an appropriate elastic response spectrum for the restoration of the Basilica.
      212  319
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Monitoring of Urban Environments and Built-Up Structures in a Seismic Area: Web-Based GIS Mapping and 3D Visualization Tools for the Assessment of the Urban Resources

    In this paper, a non-invasive infrastructural system called MASSIMO is presented for the monitoring and the seismic vulnerability mitigation of cultural heritages. It integrates ground-based, airborne and space-borne remote sensing tools with geophysical and in situ surveys to provide a multi-spatial (regional, urban and building scales) and multi-temporal (longterm, short-term and near-real-time scales) monitoring of test areas and buildings. The measurements are integrated through web-based Geographic Information System (GIS) and 3-dimensional visual platforms to support decision-making stakeholders involved in urban and structural requalification planning. An application of this system is presented over the Calabria region for the town of Cosenza and a test historical complex.
      2023  272
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The MASSIMO system for the safeguarding of historic buildings in a seismic area: operationally-oriented platforms

    In this paper, the non-invasive system MASSIMO is presented for the monitoring and the seismic vulnerability mitigation of the cultural heritage. It integrates ground-based, airborne and spaceborne remote sensing tools with geophysical and in situ surveys to provide the multi-spatial (regional, urban and building scales) and multi-temporal (long-term, short-term, near-real-time and real-time scales) monitoring of test areas and buildings. The measurements are integrated through web-based GIS and 3D visual platforms to support decision-making stakeholders involved in urban planning and structural requalification. An application of this system is presented over the Calabria region for the town of Cosenza and a test historical complex.
      2032  4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A S.M.A.R.T. system for the seismic vulnerability mitigation of Cultural Heritages

    Both assessment and mitigation of seismic vulnerability connected to cultural heritages monitoring are non-trivial issues, based on the knowledge of structural and environmental factors potential impacting the cultural heritage. A holistic approach could be suitable to provide an effective monitoring of cultural heritages within their surroundings at different spatial and temporal scales. On the one hand, the analysis about geometrical and structural properties of monuments is important to assess their state of conservation, their response to external stresses as well as anomalies related to natural and/or anthropogenic phenomena (e.g. the aging of materials, seismic stresses, vibrational modes). On the other hand, the investigation of the surrounding area is relevant to assess environmental properties and natural phenomena (e.g. landslides, earthquakes, subsidence, seismic response) as well as their related impacts on the monuments. Within such a framework, a multi-disciplinary system has been developed and here presented for the monitoring of cultural heritages for seismic vulnerability assessment and mitigation purposes*. It merges geophysical investigations and modeling, in situ measurements and multi-platforms remote sensing sensors for the non-destructive and non-invasive multi-scales monitoring of historic buildings in a seismic-prone area. In detail, the system provides: a) the long-term and the regional-scale analysis of buildings’ environment through the integration of seismogenic analysis, airborne magnetic surveys, space-borne Synthetic Aperture Radar (SAR) and multi-spectral sensors. They allow describing the sub-surface fault systems, the surface deformation processes and the land use mapping of the regional-scale area on an annual temporal span; b) the short-term and the basin-scale analysis of building’s neighborhood through geological setting and geotechnical surveys, airborne Light Detection And Radar (LiDAR) and ground-based SAR sensors. They enable assessing the site seismic effects, the built-up structural features and the surface deformation processes of the local-scale area on a monthly temporal span; c) the real- to near-real-time and building scale analysis of the heritage through proximal remotely sensing tools (e.g. terrestrial laser scanning, infrared thermal cameras and real aperture radar), combined with ambient vibration tests. They allow analyzing geometric, structural and material properties / anomalies of buildings as well as the state of conservation of structures on a real-time temporal span. The proposed approach is: Specific (it targets the cultural heritages monitoring for seismic mitigation purposes); Measurable (it provides synthetic descriptors or maps able to quantify structural and the environmental properties / anomalies / trends); Action-oriented (it provides information to plan consolidation and restoration actions for prevention activity); Relevant (it allows achieving consolidated results for cultural heritage monitoring); Time-related (it specifies when the results can be achieved). Meaningful results, obtained for the Saint Augustine Complex (XVI century) located in the historic center of the Calabrian chief town of Cosenza, are presented in terms of a web-based Geographic Information System (GIS) platform and a 3-dimensional (3D) visual software for the monitoring of environmental/urban landscapes and buildings. These tools represent the added-value products of the proposed SMART system, which allow integrating and combining multi-sensors analyses in order to support end-users involved into a cultural heritage monitoring.
      109  80
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The Interferometric Use of Radar Sensors for the Urban Monitoring of Structural Vibrations and Surface Displacements

    In this paper, we propose a combined use of real aperture radar (RAR) and synthetic aperture radar (SAR) sensors, within an interferometric processingchain, to provide a new methodology for monitoring urban environment and historical buildings at different temporal and spatial scales. In particular, ground-based RAR measurements are performed to estimate the vibration displacements and the natural oscillation frequencies of structures, with the aim of supporting the understanding of the building dynamic response. These measurements are then juxtaposed with ground-based and space-borne SAR data to monitor surface deformation phenomena, and hence, point out potential risks within an urban environment. In this framework, differential interferometric SAR algorithms are implemented to generate short-term (monthly) surface displacement and long-term (annual) mean surface displacement velocity maps at local (hundreds m2) and regional (tens km2) scale, respectively. The proposed methodology, developed among the activities carried out within the national project Programma Operativo Nazionale MASSIMO (Monitoraggio in Area Sismica di SIstemi MOnumentali), is tested and discussed for the ancient structure of Saint Augustine compound, located in the historical center of Cosenza (Italy) and representing a typical example of the Italian Cultural Heritage.
      187  3
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Frequencies identification from ambient vibration data in a masonry heritage building

    In this paper, we applied an Horizontal to Vertical (HV) spectral ratio analysis to ambient vibration data aiming at the preliminary seismic response identification of a masonry building, characterized by a significant complexity in terms of geometry and elevation. The building is monitored in the aim of the PON01-02710 MASSIMO project. We performed other standard Fourier analyses computing the Power Spectral density (PSD) and the Cross-Power Spectral Density (CPSD) of the signals. The obtained results demonstrates how HV may be very useful for a rapid screening of buildings in those complex cases such as structures belonging to the cultural heritages, and we concluded that noise measurements may indeed contribute to a detailed real dynamic response definition of a system. However, another main objective of this study is the integration of the results obtained by means of the classical aforementioned Fourier analysis techniques with those coming from the application of time-frequencies analyses: the Short-Time Fourier Transform (STFT) and the complex wavelet transform (CWT) which uses the modified complex Morlet function. In fact, there are few case studies of joint application of these different techniques to masonry heritages. Thus, the study provides the opportunity for integrating them and primarily, for exploring capabilities of wavelet transform in Structural Health Monitoring (SHM).
      309  69