Skip to main content

INGV

Permanent URI for this communityhttps://www.earth-prints.org/handle/2122/51

null

Browse

The search returned 163 results

Search Results

Now showing 1 - 10 of 163
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    MedNet: Stato di avanzamento

    (Gruppo Nazionale di Geofisica della Terra Solida - Esagrafica, 1994-11-28) ; ; ; ;
    see add File
      66  22
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Strategic use of the underground in an energy mix plan: Synergies among CO2, CH4 geological storage and geothermal energy. Latium Region case study (Central Italy)

    In recent decades, the worldwide demand for energy has been increasing, with an associated rise in CO2 emissions being observed. In such conditions, the development of ‘‘low carbon energy technologies’’ and strategic energy-mix plans is necessary, and an evaluation of the underground energy potential may be a useful step in developing these plans. This evaluation involves the synergic development of such technologies as: coal combustion in combination with CO2 geological storage (CCS), natural gas geological storage (CH4-GS) and geothermal energy (GE), especially in densely populated countries, such as Italy. Currently, 13.7% of Italian energy demand is met by foreign providers. Most of the Italian regions have energy deficits, and the Latium Region (in Central Italy) represents one of those in the worst conditions. This work proposes a methodology to develop energy-mix scenarios, starting in Latium, to identify areas that are potentially suitable for CCS, CH4-GS and GE. Six geothermal systems and one CO2/CH4 storage potential area were identified. Three main scenarios are proposed: (A) a combination of CH4-GS with methane as cushion gas and GE; (B) a combination of CH4-GS with CO2 as cushion gas and GE; (C) a combination of CCS and GE. Scenario A results in a reduction of the regional energy deficit that ranges from 21.8% to 45.6%. In Scenario B, the regional energy deficit reduction ranges from 30.8% to 80.7% and the CO2 emissions reduction ranges from 1.4% to 5.6%, supposing an injection of 20 years. Scenario C shows a decrease in the regional energy deficit that ranges from 15.9% to 22.1%, while the CO2 emissions reduction ranges from 7.1% to 31.3%, over the same time period. The proposed scenarios may be useful not only for the scientific community but also for policymakers as they identify the most reliable energetic strategies. Thus, this case study could be extended to the entire Italian territory with the ultimate goal of reaching energy autonomy in each region.
      240  2
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Numerical modelling of the Aegean-Anatolian region: geodynamical constraints from observed rheological heterogeneities

    High strain rates and intense seismic activity characterize both the boundaries and the interior of the Aegean–Anatolian plate: the availability of geodetic and geophysical data makes this region ideal to make detailed models of continental deformation. Although the deformation occurring in the Aegean–Anatolian plate may be regarded as the primary effect of the Arabian indenter push, it has already been demonstrated that this mechanism cannot account for the observed extrusion/rotation of the whole plate. We investigate the present-day steady-state anelastic deformation of the Aegean–Anatolian plate by a thin plate thermomechanical finite element (FE) model that accounts for realistic rheological mechanisms and lateral variations of lithospheric properties. Studying the region with uniform models, where average values for thermal and geometric parameters are chosen, we find that two tectonic features, in addition to the Arabian plate push, are critical to reproduce a velocity field that gives a reasonable fit to the observations. The first is the E–W constraint of NW continental Greece, related to the collision between the Aegean–Anatolian plate and the Apulia–Adriatic platform, required in the model to attain the SW orientation of the velocity field along the Hellenic Arc. The second is the trench suction force (TSF) due to subduction of the African lithosphere, which is needed to fit the observed mean extrusion velocity of 30 mm yr−1 along the Hellenic Arc. Uniform models are useful to study the sensitivity to the interplay of rheological/thermal parameters in a simplified framework but, in all cases, predict a strong deformation localized along the Hellenic Arc, whereas geodetic and seismological data show that the highest strain rates are located in western Anatolia. Furthermore, uniform models are non-unique in the sense that since we model a vertically averaged thin plate, different thermal and rheological parameters can be combined to yield the same lithospheric strength. We account for internal sources of deformation with heterogeneous models, where the available constraints on lateral variations of crustal thickness and surface heat flow have been included. The heterogeneous distribution of lithospheric strength contributes to ameliorate the fit to geodetic and stress data, since the predicted velocity field is characterized by an acceleration from E to W, with a sharp increase in the proximity of the western margin of the Anatolian peninsula, where the highest rates of intraplate deformation are observed. In our model this partitioning of the deformation is due to the different rheology of the Aegean Sea, which, being slightly deformable, transmits the TSF to the western margin of Anatolia. Our results are consistent with the interpretation of the Aegean–Anatolian system as a single, rheologically heterogeneous plate.
      240  4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Laser scanning and digital imaging for the investigation of an ancient building: Palazzo d'Accursio study case (Bologna, Italy)

    This paper describes a scientific approach aimed at studying the ancient part of Palazzo d’Accursio (Bologna, Italy), a masonry building which is part of the Italian cultural heritage. Laser scanning and the inspection of digital images are used to detect traces of restoration works and other interesting features related to both architectural marks and natural or anthropic events. One of the main elements of the method is the analysis of residual maps, obtained by computing the differences between the point coordinates of the fac¸ ade and reference fit planes. The obtained results, based on both radiometric and geometrical analysis, are used to provide a reasonable hypothesis as to the original configuration of the studied building, while taking into account the available historical information about the constructive phases of the building
      68  1
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The “exceptional” earthquake of 3 January 1117 in the Verona area (northern Italy): A critical time review and detection of two lost earthquakes (lower Germany and Tuscany)

    In the seismological literature the 3 January 1117 earthquake represents an interesting case study, both for the sheer size of the area in which that event is recorded by the monastic sources of the 12th century, and for the amount of damage mentioned. The 1117 event has been added to the earthquake catalogues of up to five European countries (Italy, France, Belgium, Switzerland, the Iberian peninsula), and it is the largest historical earthquake for northern Italy. We have analyzed the monastic time system in the 12th century and, by means of a comparative analysis of the sources, have correlated the two shocks mentioned (in the night and in the afternoon of 3 January) to territorial effects, seeking to make the overall picture reported for Europe more consistent. The connection between the linguistic indications and the localization of the effects has allowed us to shed light, with a reasonable degree of approximation, upon two previously little known earthquakes, probably generated by a sequence of events. A first earthquake in lower Germany (I0 (epicentral intensity) VII–VIII MCS (Mercalli, Cancani, Sieberg), M 6.4) preceded the far more violent one in northern Italy (Verona area) by about 12–13 hours. The second event is the one reported in the literature. We have put forward new parameters for this Veronese earthquake (Io IX MCS, M 7.0). A third earthquake is independently recorded in the northwestern area of Tuscany (Imax VII-VIII MCS), but for the latter event the epicenter and magnitude cannot be evaluated.
      187  1305
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Tomographic images and 3D earthquake locations of the seismic swarm preceding the 2001 Mt. Etna eruption: Evidence for a dyke intrusion

    On July, 12, 2001, Mt. Etna experienced a sudden increase of seismic activity heralding one of the most intense eruptions of the past 30 years. Between July 12 and July 18, when the eruption started, thousands of small magnitude earthquakes occurred and were recorded by a dense seismic network run by the Istituto Nazionale di Geofisica e Vulcanologia, Sezione di Catania (INGV-CT). Hypocentral depths of earthquakes were very shallow, mostly located above 3 km b.s.l. and clustered near the summit area. The high quality seismic dataset gives us the unique opportunity to study the process of magma migration before the eruption. In this study we present the three-dimensional earthquake locations and the velocity structure obtained by a tomographic inversion. The shallowness of seismicity allowed us to enhance the details of the structure beneath the summit craters, in a volume poorly defined by previous tomographic studies. The presence of a high Vp-body previously observed at Mt. Etna is confirmed at shallow depth beneath the southeastern part of the summit area. The earthquakes preceding the eruption onset concentrated at its western border. A low Vp/Vs anomaly is found at 0–1 km depth, just at the top of the volume where the magma intruded before the eruption. This anomalous zone can be considered as molten material wealthy in gas. The relocated seismicity occurs in a cylinder below the vents activated along the fracture system and exhibited an upward migration until the eruption. All these results show evidence for the emplacement of a near-vertical dyke striking about N-S and a few kilometres south of the summit craters.
      66  153
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Reactivation of Stromboli’s summit craters at the end of the 2007 effusive eruption detected by thermal surveys and seismicity

    This work arises from the field observations made during the civil protection emergency period connected to the 2007 Stromboli eruption. We observed changes in the shallow feeding system of the volcano to which we give a volcanological interpretation and the relative implications. Here we describe the processes that occurred in the upper feeding system from the end of the 2007 effusive eruption on 3 April to the renewal of the strombolian explosive activity at the summit craters (30 June), interpreted using multidisciplinary data. We used thermal camera data collected both from helicopter and from a fixed station at 400 m to retrieve the evolving summit crater activity. These data, compared with seismic signals and published geochemical records, allowed us to detail the shifting of the degassing activity within the crater terrace from NE to SW, occurred between 15 and 25 April 2007 prior to the resumption of the strombolian activity. In particular, from mid-April, a gradual SW displacement in the maximum apparent temperatures was recorded at the vents within the summit craters, together with a change in the very long period location and confirmed by variations in geochemical indicators (CO2∕SO2 plume ratios and CO2 fluxes) from literature. The shallow feeding system experienced a major readjustment after the end of the effusive activity, determining variations in the pressure leakage of the source, slowly deepening and shifting toward SW. All these data, together with the framework supplied by previous structural surveys, allowed us to propose that the compaction of debris accumulated in the uppermost conduit by inward crater collapses, occurred in early March, produced the observed anomalies. At Stromboli, major morphology changes, taking place in the following years, were anticipated by these small and apparently minor processes occurred in the upper feeding system. Other studies are relating similar changes to modifications of the eruptive activity also at other open-conduit volcanoes, so we believe that it may be important to have a constant monitoring of these phenomena in order to better understand their shallow feeding systems.
      525  53
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Reply to “Comment on ‘Seismic Hazard Assessment (2003–2009) for the Italian Building Code’ by Massimiliano Stucchi, Carlo Meletti, Valentina Montaldo, Helen Crowley, Gian Michele Calvi, and Enzo Boschi” by Marco Mucciarelli and Dario Albarello

    In their lengthy comment on Stucchi et al. (2011), Mucciarelli and Albarello (2012) propose opinions on aspects of the study that have been discussed and reviewed in countless circumstances in Italy and internationally, from the very beginning (2003) to the end (2009) of our research.
      378  36
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Hazard mitigation and crisis management during major flank eruptions at Etna volcano: reporting on real experience

    (Geological Society, London, Special Publications, 2015-07) ; ; ;
    Bonaccorso, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, Italia
    ;
    Calvari, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, Italia
    Etna volcano is characterized by frequent effusive eruptions from the summit craters or from flank fissures, and these have often threatened villages, infrastructures and tourist facilities. Considerable experience of lava-flow mitigation has been gained by scientists working on this volcano, and in this paper we principally discuss the problems arising from lava flows emplaced during the 2002–03 flank eruption, when eruptive fissures opened both on the northern and southern flanks of the volcano, feeding lava flows towards several villages, tourist facilities and forests. We highlight the importance of the monitoring system to follow the spreading of eruptive fissures and predict when they stopped propagating. We illustrate the value of thermal mapping in identifying active lava flows, in measuring effusion rates to estimate the maximum distance that flows can travel, and in obtaining reliable lava-flow simulations in real time in order to predict possible paths of the lava flow and to adopt the most appropriate solutions to limit its damage. Collaborations between scientists from different institutions and fields once again proved essential to understand and model the eruptive processes, to mitigate hazards and to obtain the best results.
      223  70
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The 2012 Ferrara seismic sequence: Regional crustal structure, earthquake sources, and seismic hazard

    Inadequate seismic design codes can be dangerous, particularly when they underestimate the true hazard. In this study we use data from a sequence of moderate-sized earthquakes in northeast Italy to validate and test a regional wave propagation model which, in turn, is used to under- stand some weaknesses of the current design spectra. Our velocity model, while regionalized and somewhat ad hoc, is consistent with geophysical observations and the local geology. In the 0.02–0.1 Hz band, this model is validated by using it to calculate moment tensor solutions of 20 earth- quakes (5.6 MW 3.2) in the 2012 Ferrara, Italy, seismic sequence. The seismic spectra observed for the relatively small main shock significantly exceeded the design spectra to be used in the area for critical structures. Observations and synthetics reveal that the ground motions are dominated by long-duration surface waves, which, apparently, the design codes do not adequately anticipate. In light of our results, the present seismic hazard assessment in the entire Pianura Padana, including the city of Milan, needs to be re-evaluated. Citation: Malagnini, L., R. B. Herrmann, I. Munafò, M. Buttinelli, M. Anselmi, A. Akinci, and E. Boschi (2012), The 2012 Ferrara seismic sequence: Regional crustal structure, earthquake sources, and seismic hazard, Geophys. Res. Lett., 39, L19302, doi:10.1029/ 2012GL053214.
      909  212