Calvari, Sonia
Preferred name
Calvari, Sonia
Email
sonia.calvari@ingv.it
Staff
staff
ORCID
Scopus Author ID
6603405369
Researcher ID
A-3465-2013
123 results
Filters
Settings
The search returned 123 results
Now showing 1 - 10 of 123
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Crystallisation and thermo-redox conditions governing lava tube formation and development during the 1858 eruption of Vesuvius
(Berlin; Heidelberg; New York N.Y.: Springer, 2026-11-03) ;Lemaire, Thomas; ; ; Lava flows pose a significant hazard for communities living near volcanoes. Usually not life-threatening, they can cause substantial infrastructure damage, resulting in severe socioeconomic consequences. The emplacement distance of a lava flow is often extended by the formation of efficient transport structures, such as lava tubes, which are well-insulated conduits that limit atmospheric heat loss, allowing lava to remain molten over long distances. Understanding the physicochemical conditions during lava tube formation and development is essential to comprehend flow dynamics and improve hazard assessments. Here, we combine synchrotron X-ray computed microtomography, petrological analysis and viscosity modelling to investigate the conditions that controlled the crystallisation and rheological evolution of the 1858 lava flow field at Vesuvius (Italy) and its largest lava tube by examining natural samples. Our results show that variations in groundmass crystallisation were driven by differences in cooling conditions, with crystallisation occurring from 1100 to 855 °C. During lava flow emplacement, crystallisation kinetics are primarily affected by the degree of undercooling and shear rate. The morphology and petrology of the 1858 flow field suggest piling-up of flows. Variation in groundmass crystallinity within wall linings indicates unstable thermo-redox conditions inside the lava tube during its activity. Shear rate and cooling by conduction, together with alternating filling and emptying of the tube, control wall lining formation. The evolution of internal cooling conditions affects lava flowing toward the flow front. Constraining cooling conditions will help improve numerical models simulating lava tubes or lava flows, hazard maps and response strategies during eruptive crises.4 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , From volcanic hazard to valuable resource: the hidden potential of lava tubes
(Lausann : Frontiers Media S.A., 2013-, 2026-10-12); ; Lava tubes are increasingly studied for their potential as natural shelters during the exploration of rocky planets. This paper provides a comprehensive volcanological review of terrestrial lava tubes, focusing on their dimensions, age, emplacement mechanisms, internal textures, and their relationships with lava flow surface morphologies and compositions. Additionally, we assess the compositional and rheological controls on lava tube formation, including the possibility of a rheological threshold required for tube development. Terrestrial examples offer a crucial framework for interpreting volcanic terrains on other planetary bodies and for understanding the formation and evolution of extra-terrestrial lava tubes. We examine the processes linking the internal features of lava tubes to the surface structures of their parent lava flows, with the aim of reconstructing flow field emplacement dynamics. This approach aids in identifying the locations and pathways of shallow, hidden lava tubes using surface morphology alone. However, the relationship weakens for deeper tubes formed within thick lava flow fields emplaced over months or years, where surface structures mainly record the final, typically low-discharge rate phase of an eruption. Accessing deep tubes would therefore provide direct insights into the early stages of lava flow field development. We further discuss volcanic hazards associated with active lava flow fields that contain lava tube systems, as well as post-emplacement stability, conservation, and the potential for public use of lava tube caves as geo-heritage sites. The volcanological processes summarized here provide essential tools for identifying, interpreting, and utilizing lava tubes both on Earth and on other effusive, basaltic volcanic bodies in the Solar System.9 9 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Pulsed dike emplacement and lava tube formation during the 1971 Etna eruption
(Lausann : Frontiers Media S.A., 2013-, 2026-09-16); ;Self, Stephen ;Messina, Danilo; The Serracozzo cave, formed during Mount Etna’s 1971 flank eruption, offers a rare insight into feeder dike dynamics and lava transport. This bipartite cavity comprises an upper section within an eruptive fissure and a lower portion developed in a confined arterial ‘a‘ā lava flow. The processes of emplacement and growth of these structures are rarely treated in the volcanological literature through direct field-survey-observations due to the difficulty of exploring and accessing these environments. Here we combined historical imagery, geological field surveys and high-resolution digital modeling via terrestrial laser scanning and drone photogrammetry to reconstruct the cave’s morphological evolution. Our analysis reveals a pulsating dike emplacement characterized by alternating cycles of magmatic pressure buildup and release, driving both upward and downslope propagation. The morphology of the fissure exhibits distinctive pinch-and-swell geometry, while surface vents acted as pressure-release valves, producing localized pāhoehoe overflows and skylights. We have estimated the volume of the whole cavity at ∼ 1270 m3, which compared to that of the proximal host lava, makes the cavity just 6.2% of the flow. These findings for the first time ever quantify the cave to flow ratio, describe the dynamic emplacement of the feeder dike, enhance understanding of fissure-fed lava systems, and provide valuable constraints on the timing and processes of lava tube formation, contributing to improved volcanic hazard assessments and mitigation at Etna and analogous basaltic volcanoes worldwide.4 14 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Discovering the 1858 Lava Flow Field at Somma-Vesuvius (Italy) Through geoitinerary, Virtual Tour and 3D Reconstruction of Volcanic Landforms
(Heidelberg ; Berlin : Springer, 2026-02-14) ;Lemaire, Thomas; ; ; Repola, LeopoldoGeotourism in volcanic areas attracts millions of visitors each year travelling to see and explore volcanic areas. One of the world’s most famous and visited volcanic areas is Somma-Vesuvius. Here, tourism is mainly concentrated around the central crater while the rest of the volcano, part of Vesuvius National Park, is largely unvisited. The volcano’s worldwide fame is primarily linked to its explosive activity, most notably the famous eruption that destroyed Pompeii and Hercula- neum in 79 CE. Yet Somma-Vesuvius underwent long periods of effusive activity, such as the 1631–1944 eruptive cycle. On the volcano, there are examples of archetypal lava flows, including the 1858 flow field in which lava tubes formed. We propose a geoitinerary through the 1858 lava flow field that includes five sites, three lava tubes, an ephemeral vent and a tumulus, that allows people to evidence effusive activity and discover volcanic features formed during such activ- ity at Somma-Vesuvius. A website was developed to host a virtual tour, which includes 360° images and an explicative panel for each site. The largest lava tube was 3D scanned to reconstruct its geometry, and to conserve a virtual copy of this fragile structure. Both the website and 3D scan aim to sensibilize people either not used to hiking or with physical impediment about volcanic landforms and their scientific relevance. The pertinence of the geoitinerary has been assessed by a SWOT analysis. The geoitinerary may contribute to divert tourist traffic away from the volcanic cone, while raising awareness on volcanic processes.9 43 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Volcanic deposits from mount Etna (Italy) as high-fidelity lunar simulants for In-Situ Resource Utilization (ISRU) applications
(Oxford: Elsevier Ltd., 2026) ;Melchiori, Giacomo ;Santoro De Vico, Francesco ;Dottori, Alice; Terrestrial analogues of lunar regolith are crucial for developing In-Situ Resource Utilization (ISRU) technologies and testing mission hardware before lunar deployment. Mount Etna's (Southern Italy) diverse volcanic products, generated by complex slab-edge processes, offer exceptional compositional variability that encompasses both mare-like and highland-like lithologies, making it an ideal natural laboratory for planetary analogue studies. By investigating pyroclastic deposits and basaltic samples from the Cisternazza pit crater, and the Monte Nunziata and Tre Livelli lava tubes, we discovered that the sample from the Cisternazza pit crater exhibits remarkable chemical and mineralogical similarity to Apollo 14 highlands materials. The principal component analysis confirms its affinity with the lunar Fra Mauro formation samples, while X-ray diffraction reveals a plagioclase-pyroxene-olivine assemblage with 40 % amorphous phase mimicking lunar impact glass. VIS-NIR spectral signatures show characteristic 1-μm absorption features matching agglutinate-rich lunar regolith. Engineering geomechanical tests demonstrate that these materials achieve compressive strengths up to 16.40 MPa in earth environmental conditions when processed as alkali-activated materials, comparable to other lunar highlands simulants tested as reference materials for lunar construction. Our carbothermal reduction modeling indicates favorable oxygen and water extraction yields, validating Mount Etna volcanic deposits as high-fidelity simulants for advancing lunar ISRU technologies and mission preparation.6 29 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Very fast canyon formation and evolution along active volcanic flanks: A case from Stromboli Island
(Amsterdam: Elsevier, 2025-08-07); ; ; ; Active insular volcanoes are generally characterized by their rapid morphological evolution, as a close interplay exists between eruptive activity and erosive-depositional processes in such volcanoes. The Sciara del Fuoco depression, a sector collapse scar on the NW flank of the Stromboli volcano (Italy), is considered a natural laboratory for studying the response of a volcanic slope to such a dynamic evolution. In this study, we report the very fast morphological evolution that affected the subaerial and submarine Sciara del Fuoco slope from May 2022 to May 2023, a period of time marked by the occurrence of two crater rim failures, pyroclastic density currents and multiple lava flows. The analysis of repeated topo-bathymetric surveys demonstrates that a narrow (100 m wide at maximum) and steep-sided canyon, tens of meters deep, formed in the central part of the Sciara del Fuoco. The canyon was mainly related to the erosive activity of the pyroclastic density currents, which led to the remobilization of (at least) 3.7 × 106 m3 volcanic material, mainly in the subaerial slope. The canyon was initially formed by retrogressive erosion upslope, starting from an initial submarine/coastal landslide. It then evolved through a progressive widening of its flanks through small-scale landslides. The study shows that landslide location, as well as the final canyon shape, were strongly controlled by the lithological limits of pre- vious lava flows, highlighting the importance of inherited morpho-stratigraphy and lateral heterogeneities in slope stability. Since its formation, the canyon has acted as a main conduit for lava flows and volcaniclastic materials supplied on their way to the sea. About 1 × 106 m3 of material filled the subaerial canyon floor through time, and another 1 × 106 m3 of slope accretion was estimated for the submarine part of the Sciara del Fuoco, down to 400 m below sea level. Comparing the volumes associated with slope erosion and accretion, it is evident that a large part of the remobilized material bypassed the Sciara del Fuoco shallow-water sector and was emplaced at greater depths. This study highlights the relevance of an integrated system for monitoring the submarine and subaerial morphological evolution of insular volcanic flanks, contributing to an improved geo- hazard assessment during eruptive crises.7 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Exploring Vision Transformers and Convolution Neural Networks for the Thermal Image Classification of Volcanic Activity
(Basel: MDPI AG, 2011-, 2025-02-28); ; This paper addresses the classification of images depicting the eruptive activity of Mount Etna that were captured by a network of ground-based thermal cameras. This study aimed to evaluate the performance of Vision Transformers (ViTs), such as the Swin Trans- former, compared with Convolutional Neural Networks (CNNs), including AlexNet and ShuffleNet. A dataset of 3000 images, evenly distributed across six classes, was utilized for training and testing. The results indicate that for this specific application, the performance advantage of Vision Transformers over CNNs was marginal, likely due to the nature of the classification task. While the Transformer-based models, like the Swin Transformer, demon- strated a slightly improved accuracy for certain complex classes, the CNN-based models, such as AlexNet and ShuffleNet, exhibited superior computational efficiency, particularly in terms of the classification speed. These findings highlight the suitability of CNNs for real-time volcanic activity monitoring. Additionally, this paper provides a comprehensive review of the various CNN and Vision Transformer architectures, offering insights into their strengths and limitations in the context of volcanic activity classification.7 32 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Chapter 10 Case Studies Illustrating the Role of Geomorphology in Assessing Volcanic Hazards
(Springer Science, 2025); ; ;Carracedo, Juan; This chapter, in relation to Chap. 9, contains five case studies from contributors who depict a range of geomorphic hazards and responses to eruptive and non-eruptive events at active volcanoes. Related to Sect. 2 of Chap. 9, the contributions are: the 2021 cone building and lava-flow eruption of Tajogaite-Cumbre Vieja, La Palma Island; the 2014–2015 Holuhraun and Bárðarbunga eruption and lava-flow field, Iceland; and the 2010–2018 PDCs and dome building at Merapi, Indonesia. Related to Sect. 3 of Chap. 9, changes induced by the 2012 Te Maari eruption, New Zealand are described, while related to Sect. 4, emphasis is on the rapid evolution of the Sciara del Fuoco at Stromboli, Italy, due to eruptions and a tsunamigenic land- slide between 2012 and 2021.4 1 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Reawakening of Voragine, the Oldest of Etna's Summit Craters: Insights from a Recurrent Episodic Eruptive Behavior
Paroxysmal explosive activity at Etna volcano (Italy) has become quite frequent over the last three decades, raising concerns with the civil protection authorities due to its significant impact on the local population, infrastructures, viability and air traffic. Between 4 July and 15 August 2024, during the tourist season peak when the local population doubles, Etna volcano gave rise to a sequence of six paroxysmal explosive events from the summit crater named Voragine. This is the oldest and largest of Etna’s four summit craters and normally only produces degassing, with the previous explosive sequences occurring in December 2015 and May 2016. In this paper, we use thermal images recorded by the monitoring system maintained by the Istituto Nazionale di Geofisica e Vulcanologia, Osservatorio Etneo (INGV–OE), and an automatic procedure previously tested in order to automatically define the eruptive parameters of the six lava fountain episodes. These data allowed us to infer the eruptive processes and gain some insights on the evolution of the explosive sequences that are useful for hazard assessment. Specifically, our results lead to the hypothesis that the Voragine shallow storage has a capacity of ~12–15 Mm3, which was not completely emptied with the last two paroxysmal events. It is thus possible that one or two additional explosive paroxysmal events could occur in the future. It is noteworthy that an additional paroxysmal episode occurred at Voragine on 10 November 2024, after the submission of this paper, thus confirming our hypothesis. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY25 87 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Lava flow field development and lava tube formation during the 1858–1861 eruption of Vesuvius (Italy), unravelled by historical documentation, lidar data and 3D mapping
(Elsevier, 2024-10-01) ;Lemaire, Thomas; ; ; Repola, LeopoldoSomma-Vesuvius is well known for its powerful Plinian explosive eruptions, however during the last eruptive cycle (1631-1944), persistent activity took place on the stratovolcano as mild and violent Strombolian, and effusive eruptions, forming more than one hundred lava flow fields. An important mechanism of lava transport within lava flow fields is the formation and development of lava tubes. The presence of lava tubes in a flow field can greatly increase their distance of emplacement. Observations of lava tubes Journal Pre-proof Journal Pre-proof at Vesuvius have been documented in historical records and speleological reports but no modern scientific studies are available. This work focuses on lava tubes formed in the compound lava flow field of the long-lived 1858 eruption (from 27 May 1858 to 12 April 1861) that was fed by seven eruptive fissures. The temporal and spatial evolution of the 1858 lava flow field was reconstructed using historical documentation. The exposed lava flow field surface was analysed using a 1-m resolution lidar Digital Surface Model (DSM). Surveys to fully digitize the interior and the overlying surface of the largest lava tube found in the 1858 lava flow field were conducted using a terrestrial laser scanner, optical cameras, and an Unmanned Aerial Vehicle (UAV). The accurate 3D model obtained was used to precisely quantify the inner dimensions and to better constrain the morphologies of the lava tube. Observed internal features were described and used to gain information on the formation and activity of the lava tube. Our data allowed us to understand that the described lava tube formed as an inflated lava flow inside which lava flowed through during an extended period ultimately draining out completely at the end of the eruption. Understanding how lava flow fields develop and how lava tubes form on Vesuvius is crucial to re-evaluate the last effusive activity of the volcano and its impact on hazard assessment.19 104
