Skip to main content
The search returned 58 results
Now showing 1 - 10 of 58
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Characterization of the Sos Enattos site for the Einstein Telescope

    In this work we report the ongoing characterization of the Sos Enattos former mine (Sardinia, Italy), one of the two candidate sites for the Einstein Telescope (ET), the European third-generation underground interferometric detector of Gravitational Waves. The Sos Enattos site lies on a crystalline basement, made of rocks with good geomechanical properties, characterized by negligible groundwater. In addition, the site has a very low seismic background noise due to the absence of active tectonics involving Sardinia. Finally, the area has a low population density, resulting in a reduced anthropic noise even at the ground level. This location was already studied in 2012-2014 as a promising site for an underground detector. More recently, in March 2019, we deployed a new network of surface and underground seismometers at the site, that is currently monitoring the local seismic noise. Most of the energy carried by the seismic waves is due to the microseisms below 1 Hz, showing a significant correlation with the waves of the west Mediterranean sea. Above 1 Hz the seismic noise in the underground levels of the mine approaches the Peterson's low noise model. Exploiting mine blasting works into the former mine, we were also able to perform active seismic measurements to evaluate the seismic waves propagation across the area. In conclusion we also give a first assessment about the acoustic and magnetic noise in this underground site.
      936  165
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      1  30
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    SeisBench—A Toolbox for Machine Learning in Seismology

    Machine‐learning (ML) methods have seen widespread adoption in seismology in recent years. The ability of these techniques to efficiently infer the statistical properties of large datasets often provides significant improvements over traditional techniques when the number of data are large (millions of examples). With the entire spectrum of seismological tasks, for example, seismic picking and detection, magnitude and source property estimation, ground‐motion prediction, hypocenter determination, among others, now incorporating ML approaches, numerous models are emerging as these techniques are further adopted within seismology. To evaluate these algorithms, quality‐controlled benchmark datasets that contain representative class distributions are vital. In addition to this, models require implementation through a common framework to facilitate comparison. Accessing these various benchmark datasets for training and implementing the standardization of models is currently a time‐consuming process, hindering further advancement of ML techniques within seismology. These development bottlenecks also affect “practitioners” seeking to deploy the latest models on seismic data, without having to necessarily learn entirely new ML frameworks to perform this task. We present SeisBench as a software package to tackle these issues. SeisBench is an open‐source framework for deploying ML in seismology—available via GitHub. SeisBench standardizes access to both models and datasets, while also providing a range of common processing and data augmentation operations through the API. Through SeisBench, users can access several seismological ML models and benchmark datasets available in the literature via a single interface. SeisBench is built to be extensible, with community involvement encouraged to expand the package. Having such frameworks available for accessing leading ML models forms an essential tool for seismologists seeking to iterate and apply the next generation of ML techniques to seismic data.
      175  350
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A Seismological Study of the Sos Enattos Area—the Sardinia Candidate Site for the Einstein Telescope

    The recent discovery of gravitational waves (GWs) and their potential for cosmic observations prompted the design of the future third‐generation GW interferometers, able to extend the observation distance for sources up to the frontier of the Universe. In particular, the European detector Einstein Telescope (ET) has been proposed to reach peak strain sensitivities of about 3×10−25Hz−1/2 in the 100 Hz frequency region and to extend the detection band down to 1 Hz. In the bandwidth [1,10] Hz, the seismic ambient noise is expected to represent the major perturbation to interferometric measurements, and the site that will host the future detectors must fulfill stringent requirements on seismic disturbances. In this article, we conduct a seismological study at the Italian ET candidate site, the dismissed mine of Sos Enattos in Sardinia. In the range between few mHz to hundreds of mHz, out of the detection bandwidth for ET, the seismic noise is compatible with the new low‐noise model (Peterson, 1993); in the [0.1,1] Hz bandwidth, we found that seismic noise is correlated with sea wave height in the northwestern Mediterranean Sea. In the [1,10] Hz frequency band, noise is mainly due to anthropic activities; within the mine tunnels (⁠≃100m underground), its spectrum is compliant with the requirements of the ET design. Noise amplitude decay with depth is consistent with a dominance of Rayleigh waves, as suggested by synthetic seismograms calculated for a realistic velocity structure obtained from the inversion of phase‐ and group‐velocity dispersion data from array recording of a mine blasting. Further investigations are planned for a quantitative assessment of the principal noise sources and their spatiotemporal variations.
      496  607
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Geodynamics, geophysical and geochemical observations, and the role of CO2 degassing in the Apennines

    An accurate survey of old and new datasets allowed us to probe the nature and role of fluids in the seismogenic processes of the Apennines mountain range in Italy. New datasets include the 1985–2021 instrumented seismicity catalog, the computed seismogenic thickness, and geodetic velocities and strains, whereas data from the literature comprise focal mechanism solutions, CO2 release, Moho depth, tomographic seismic velocities, heat flow and Bouguer gravity anomalies. Most of the inspected datasets highlight differences between the western and eastern domains of the Apennines, while the transition zone is marked by high geodetic strain, prevailing uplift at the surface and high seismic release, and spatially corresponds with the overlapping Tyrrhenian and Adriatic Mohos. Published tomographic models suggest the presence of a large hot asthenospheric mantle wedge which intrudes beneath the western side of the Apennines and disappears at the southern tip of the southern Apennines. This wedge modulates the thermal structure and rheology of the overlying crust as well as the melting of carbonate-rich sediments of the subducting Adriatic lithosphere. As a result, CO2-rich fluids of mantle-origin have been recognized in association with the occurrence of destructive seismic sequences in the Apennines. The stretched western domain of the Apennines is characterized by a broad pattern of emissions from CO2-rich fluids that vanishes beneath the axial belt of the chain, where fluids are instead trapped within crustal overpressurized reservoirs, favoring their involvement in the evolution of destructive seismic sequences in that region. In the Apennines, areas with high mantle He are associated with different degrees of metasomatism of the mantle wedge from north to south. Beneath the chain, the thickness and permeability of the crust control the formation of overpressurized fluid zones at depth and the seismicity is favored by extensional faults that act as high permeability pathways. This multidisciplinary study aims to contribute to our understanding of the fluid-related mechanisms of earthquake preparation, nucleation and evolution encouraging a multiparametric monitoring system of different geophysical and geochemical observables that could lead the creation of a data-constrained and reliable conceptual model of the role of fluids in the preparatory phase of earthquakes in the Apennines.
      2091  150
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    INSTANCE – the Italian seismic dataset for machine learning

    The Italian earthquake waveform data are collected here in a dataset suited for machine learning analysis (ML) applications. The dataset consists of nearly 1.2 million three-component (3C) waveform traces from about 50 000 earthquakes and more than 130 000 noise 3C waveform traces, for a total of about 43 000 h of data and an average of 21 3C traces provided per event. The earthquake list is based on the Italian Seismic Bulletin (http://terremoti.ingv.it/bsi, last access: 15 February 2020​​​​​​​) of the Istituto Nazionale di Geofisica e Vulcanologia between January 2005 and January 2020, and it includes events in the magnitude range between 0.0 and 6.5. The waveform data have been recorded primarily by the Italian National Seismic Network (network code IV) and include both weak- (HH, EH channels) and strong-motion (HN channels) recordings. All the waveform traces have a length of 120 s, are sampled at 100 Hz, and are provided both in counts and ground motion physical units after deconvolution of the instrument transfer functions. The waveform dataset is accompanied by metadata consisting of more than 100 parameters providing comprehensive information on the earthquake source, the recording stations, the trace features, and other derived quantities. This rich set of metadata allows the users to target the data selection for their own purposes. Much of these metadata can be used as labels in ML analysis or for other studies. The dataset, assembled in HDF5 format, is available at http://doi.org/10.13127/instance (Michelini et al., 2021).
      399  93
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    3D Finite element modeling of stress interaction: an application to Landers and Hector Mine fault systems

    (2005) ; ; ;
    Cianetti, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    ;
    Giunchi, C.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia
    We model the coseismic and postseismic stress changes and the surface deformation caused by earthquake dislocations through a three-dimensional (3-D) finite element numerical procedure applied to the 1992 Landers and the 1999 Hector Mine earthquakes. Our goal is to investigate the stress interaction between these complex nonplanar fault systems. The modeling strategy proposed in this study allows the calculation of elastic deformation and Coulomb stress changes either by imposing the slip distribution as a boundary condition along assigned faults or by retrieving the slip pattern on preexisting faults imposing the regional stress field. We study how different initial stress conditions ( including the depth dependence of isotropic components of the regional stress), different values of Coulomb friction coefficient, and the 1-D rigidity layering can affect the slip pattern on assumed faults and the resulting Coulomb stress changes. We propose here an original approach to simultaneously model slip distribution, surface deformation, and stress perturbations consistently with the rheological parameters of the lithosphere and its state of stress.
      397  18
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    DOiT: a graphic tool for the inversion of deformation data

    (2007-04-16) ; ; ; ;
    Tagliaventi, S.; Consorsio Interuniversitario per le applicazioni di Supercalcolo per Università e Ricerca, Roma
    DOIT (Data Optimization Integrated Tool) is an ongoing project to develop a tool to perform inversions of deformation data by global optimization running on a commodity supercomputer. Its main task is to facilitate the user about the interpretation of deformation data (GPS, InSAR, leveling, etc.) due to different geophysical sources such as seismic dislocation or volcanic inflation. We have developed a graphic interface assisting the user during the required steps to set-up and solve the inversion problem: data importation, model and parameters space definition, job submission, monitoring and results visualization. The user can import data in some predefined formats or define his own custom format. The forward models embedded in the tool are analytical descriptions of simple sources like isotropic point-source, finite spheroid, or general dislocation. A further feature is the possibility to use as forward model arrays of precomputed solutions based on finite element or other numerical techniques so that it is possible to take into account some realistic features (e.g. topography). The user has the capability to choose from few direct search methods such as Monte Carlo, simulated annealing or the more efficient Neighbourhood Algorithm. In this last case it is possible to perform a bayesian appraisal of the sampled solutions. The main paradigm of the tool is a client-server structure. The client machine submits jobs and retrieves information about the state of the running task; the graphical interface takes care also to link the computing front-end and the client machine itself. Since all the search algorithms are implemented using the MPI library, users can take advantage of parallel runs on cluster machines without knowing details either of MPI codes or the use of a batch queue in a distributed computing environment. The tool is a C++ application running on a dedicated Linux computer and is written using QT4 graphic libraries (the same libraries of the KDE window manager) which offer powerful options. An important feature of the DOIT tool is the communication with clients. When the client, (a piece of software available for almost any OS) asks for the user interface service, DOIT exports its graphical environment to a session on the client itself, using the X-protocol with high compression technology. This limits the needs of a fast connection between the client and the server, maintaining a high interactivity at the same time. Furthermore, the protocol is encapsulated over SSL, facilitating a safe communication with the server. DOIT has an open structure allowing to easily modify the application, adding forward models or implementing new inversion algorithm. We present a test of the DOIT capabilities, running inversions on an IBM P575 with 168 Power5 processors installed at CASPUR.
      210  508
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Comparison of Deep Learning Techniques for the Investigation of a Seismic Sequence: An Application to the 2019, Mw 4.5 Mugello (Italy) Earthquake

    The increase of available seismic data prompts the need for automatic processing procedures to fully exploit them. A good example is aftershock sequences recorded by temporary seismic networks, whose thorough analysis is challenging because of the high seismicity rate and station density. Here, we test the performance of two recent Deep Learning algorithms, the Generalized Phase Detection and Earthquake Transformer, for automatic seismic phases identification. We use data from the December 2019 Mugello basin (Northern Apennines, Italy) swarm, recorded on 13 permanent and nine temporary stations, applying these automatic procedures under different network configurations. As a benchmark, we use a catalog of 279 manually repicked earthquakes reported by the Italian National Seismic Network. Due to the ability of deep learning techniques to identify earthquakes under poor signal-to-noise-ratio (SNR) conditions, we obtain: (a) a factor 3 increase in the number of locations with respect to INGV bulletin and (b) a factor 4 increase when stations from the temporary network are added. Comparison between deep learning and manually picked arrival times shows a mean difference of 0.02–0.04 s and a variance in the range 0.02–0.07 s. The improvement in magnitude completeness is ∼0.5 units. The deep learning algorithms were originally trained using data sets from different regions of the world: our results indicate that these can be successfully applied in our case, without any significant modification. Deep learning algorithms are efficient and accurate tools for data reprocessing in order to better understand the space-time evolution of earthquake sequences.
      449  98
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Analytical and 3-D numerical modelling of Mt. Etna (Italy) volcano inflation

    Since 1993, geodetic data obtained by different techniques (GPS, EDM, SAR, levelling) have detected a consistent inflation of the Mt. Etna volcano. The inflation, culminating with the 1998– 2001 strong explosive activity from summit craters and recent 2001 and 2002 flank eruptions, is interpreted in terms of magma ascent and refilling of the volcanic plumbing system and reservoirs. We have modelled the 1993–1997 EDM and GPS data by 3-D pressurized sources to infer the position and dimension of the magma reservoir. We have performed analytical inversions of the observed deformation using both spheroidal and ellipsoidal sources embedded in a homogeneous elastic half-space and by applying different inversion methods. Solutions for these types of sources show evidence of a vertically elongated magma reservoir located 6 km beneath the summit craters. The maximum elevation of topography is comparable to such depth and strong heterogeneities are inferred from seismic tomography; in order to assess their importance, further 3-D numerical models, employing source parameters extracted from analytical models, have been developed using the finite-element technique. The deformation predicted by all the models considered shows a general agreement with the 1993–1997 data, suggesting the primary role of a pressure source, while the complexities of the medium play a minor role under elastic conditions. However, major discrepancies between data and models are located in the SE sector, suggesting that sliding along potential detachment surfaces may contribute to amplify deformation during the inflation. For the first time realistic features of Mt. Etna are studied by a 3-D numerical model characterized by the topography and lateral variations of elastic structure, providing a framework for a deeper insight into the relationships between internal sources and tectonic structures.
      549  33