Skip to main content

A. Contributo su rivista

Permanent URI for this communityhttps://www.earth-prints.org/handle/2122/57572

Browse

The search returned 449 results

Search Results

Now showing 1 - 10 of 449
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Nowcasting maps of F2-layer basic maximum usable frequency and corresponding skip distances over the european region

    (Elsevier Science Limited:Oxford Fulfillment Center, PO Box 800, Kidlington Oxford OX5 1DX United Kingdom:011 44 1865 843000, 011 44 1865 843699, EMAIL: asianfo@elsevier.com, tcb@elsevier.co.UK, INTERNET: http://www.elsevier.com, http://www.elsevier.com/locate/shpsa/, Fax: 011 44 1865 843010, 2026-12-01) ; ; ; ;
    This work presents the IRI&LKW new UP procedure, which generates nowcasting maps of the F2-layer basic maximum usable fre- quency (MUF) and corresponding skip distances over Europe. IRI&LKW new UP is a four-step procedure based on: (1) deriving two effective values of the 12-month running mean of the sunspot number (R12) according to autoscaled foF2 and M(3000)F2 ionosonde measurements; (2) using these two values of R12 as input for the International Reference Ionosphere (IRI) model to calculate the ordi- nary critical frequencies foE and foF2 of the E and F2 layers, respectively, and the obliquity factor M(3000)F2; (3) feeding the Lockwood algorithm with these values of foE, foF2, and M(3000)F2 to compute a discrete grid of MUF values; and (4) mapping these grids of values to generate nowcasting maps of MUF and corresponding skip distances. The maps cover the European sector from 9°W to 45°E in longitude and from 34°N to 65°N in latitude, with a 1°×1° spatial resolution, with 15-minute time resolution. They are centered on six selected transmitting points: Stockholm (18.1 °E, 59.3°N), Warsaw (21.1°E, 52.2°N), Pruhonice (14.6°E, 50.0°N), Paris (2.3°E, 48.8°N), Rome (12.5°E, 41.9°N), and Athens (23.7°E, 37.9°N). The internal consistency of the IRI&LKW new UP procedure and its sen- sitivity to storm-time departures from climatology are assessed by comparing MUF maps retrospectively generated by IRI&LKW new UP for the main and recovery phases of the May 2024 extreme geomagnetic storm with their corresponding quiet-time and climatological counterparts. Results show that IRI&LKW new UP produces observation-informed MUF and corresponding skip-distance maps that exhibit substantial storm-time departures from climatological conditions. Although an independent validation against oblique- sounding observations is not available for the analyzed epochs, the results indicate that IRI&LKW new UP has the potential to provide supporting information for HF-dependent applications in surveillance, civil protection, aviation, and defense, particularly during adverse space weather conditions such as those associated with the May 2024 superstorm.
      8  2
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    SDQ: a new tool for the evaluation of seismic-accelerometric data quality

    (Sgonico TS: Istituto nazionale di oceanografia e geofisica OGS, 2025-01-28) ; ; ; ;
    This work introduces the Seismic Data Quality (SDQ) project, an open-source Python tool package designed to evaluate the performance of co-located accelerometric and velocimetric stations, assess data quality, and support technicians in the seismic surveillance room at the Rome headquarters. SDQ conducts these verifications through analyses of seismic events and continuous data streams. For earthquake data, SDQ compares ground motion parameters from co-located sensors, subsequently classifying waveforms into quality classes. Continuous data verification relies on ambient noise streams and quality metrics, such as percentage gap, data availability, root-mean-square, and power spectral density. The SDQ tool was tested using data from 200 stations of the National Institute of Geophysics and Volcanology (Italy), each with six channels, within the National Seismic Network, analysing over 15,000 waveforms from Italian earthquakes with local or moment magnitudes (M L and/or M W) ≥ 3.5 and hypocentral distances (R ipo) ≤ 150 km, recorded from 2012 to 2023. Earthquake data and station metadata are sourced from the International Federation of Digital Seismograph Networks web services (https://terremoti.ingv.it/webservices_and_software). Continuous data analyses utilise daily miniSEED recordings from each station, classifying waveforms into quality categories based on various metrics. SDQ generates summary tables, images, and explanatory text files for both seismic events and continuous data. SDQ is available for download at https://gitlab.rm.ingv.it/EIDA/quality/sdq.
      3
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    National and regional high-quality seismic background noise models for Italy

    We present new national and regional seismic noise models for Italy based on continuous vertical-component recordings acquired between January 2024 and February 2025 at 349 broadband seismic stations. A rigorous quality-control and dataselection workflow was developed to identify station malfunctions, metadata inconsistencies, data gaps, and earthquake-related seismic transients using conservative empirical magnitude-hypocentral-distance criteria. After quality assessment, 283 stations were retained for the model construction. The Italian Seismic Noise Model (ISNM) was derived by equally stacking normalized station-level probability density functions (PDFs), with the 5th (P 5) and 95th (P 95) percentiles defining its lower and upper boundaries. Compared with the previous Italian model, the ISNM defines a narrower spectral envelope, with its lower boundary averaging 4.1 dB higher and its upper boundary 11.9 dB lower over their common frequency range. Sensitivity analyses show differences within approximately ±1.5 dB below 10 Hz between models obtained with and without data selection, whereas quality control substantially reduces
      4  2
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      3  2
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A global ionosonde dataset of validated foF2 observations for the May 2024 Mother’s Day superstorm

    (Springer Nature London: Nature Publishing Group, 2026-10-20) ; ; ; ;
    The May 2024 Mother's Day superstorm offers a rare opportunity to document the global ionospheric response to an extreme geomagnetic disturbance using ground-based ionosonde observations. Here, we present and describe a manually validated dataset of the F2-layer ordinary critical frequency (foF2) observations recorded by 38 ionosonde stations distributed across high, mid, and low latitudes from 10 to 14 May 2024, covering both the main and recovery phases of the storm. The dataset was produced through a careful inspection and validation of individual ionograms, overcoming limitations of automatic scaling procedures that can become particularly unreliable during disturbed ionospheric conditions. To our knowledge, this is the first time that such a large collection of foF2 observations has been compiled for an extreme event such as the May 2024 Mother's Day superstorm. The availability of this validated foF2 dataset provides a high-quality benchmark for investigating storm-time ionospheric dynamics, assessing ionosonde autoscaling performance, and evaluating empirical and assimilative ionospheric models under extreme space-weather forcing.
      2  2
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Reproducibility of geodetic source modelling and implications for the unrest at Campi Flegrei caldera (Italy)

    (Elsevier BV:PO Box 211, 1000 AE Amsterdam Netherlands:011 31 20 4853757, 011 31 20 4853642, 011 31 20 4853641, EMAIL: nlinfo-f@elsevier.nl, INTERNET: http://www.elsevier.nl, Fax: 011 31 20 4853598, 2026-08-22) ; ; ; ;
    Surface deformation derived from satellite interferometry and GNSS observations represents a fundamental tool for investigating magma dynamics beneath active volcanoes. However, geodetic inversion results may depend on the quality, quantity, and accuracy of the datasets employed. Therefore, the assessment of model robustness is essential for deriving reliable interpretations of subsurface processes. Campi Flegrei caldera (Italy) has been experiencing progressive uplift since 2005, associated with increased seismicity and gas emissions. Modelling of the 2007-2023 deformation from COSMO-SkyMed and GNSS data suggested the presence of a shallow inflating source at 3.9 km depth since 2015 and a deeper deflating reservoir. This interpretation was obtained using a complex 3D heterogeneous numerical modelling framework. In this work, we evaluate the model robustness by repeating the geodetic inversion using multi-mission satellite datasets, including Sentinel-1 observations and a different COSMO-SkyMed analysis, together with GNSS measurements. We show that, although discrepancies affect part of the COSMO-SkyMed descending dataset, their impact on the inversion remains limited because the data are analysed over discrete time windows, the discrepancies remain moderate relative to the overall deformation, the uncertainties are accounted for, and the inversion integrates multiple geodetic datasets. The results show a stable geometry and depth of the shallow source, together with comparable estimates of volume change. These findings demonstrate that the source parameters are reproducible across alternative InSAR datasets, providing an explicit cross-validation. More broadly, they show that first-order constraints on magmadriven deformation at Campi Flegrei are robust and can support interpretations of volcanic unrest and hazard assessment.
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Rapid transient uplift driven by active slab tear, southern Calabria, Italy

    (London: Nature Publishing Group UK, 2026-11-06)
    Dorsey, Rebecca J
    ;
    Brown, Nathan D
    ;
    ; ;
      6  3
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      4  2
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Exploring the relationship between volcanic radiative power and plume height using satellite observations

    Lava fountains can be observed and monitored in near-real time using satellite observations. High temporal resolution thermal data acquired by geostationary sensors can be exploited to monitor the volcanic thermal activity, as well as the production and dispersion of a volcanic cloud. Here we want to explore the relationship between the volcanic radiative power (VRP) and the plume height (PH). These volcanic products are obtained using a ML-based approach applied to SEVIRI satellite images. Observational data recorded at Etna volcano from 11 lava fountains (February-March 2021) indicate that the PH is positively correlated with the VRP. This finding suggests a potential link between thermal power output and plume height, but more research with a larger dataset from various volcanoes and time periods is needed to confirm this relationship.
      4  6
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    From MSG-SEVIRI to MTG-FCI: Advancing Volcanic Thermal Monitoring from Geostationary Satellites

    (Basel : Molecular Diversity Preservation International, 2026) ;
    Di Bella, Giovanni Salvatore
    ;
    ; ;
      4  3