Skip to main content
The search returned 12 results
Now showing 1 - 10 of 12
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A Hidden Eruption: The 21 May 2023 Paroxysm of the Etna Volcano (Italy)

    On 21 May 2023, a hidden eruption occurred at the Southeast Crater (SEC) of Etna (Italy); indeed, bad weather prevented its direct and remote observation. Tephra fell toward the southwest, and two lava flows propagated along the SEC’s southern and eastern flanks. The monitoring system of the Istituto Nazionale di Geofisica e Vulcanologia testified to its occurrence. We analyzed the seismic and infrasound signals to constrain the temporal evolution of the fountain, which lasted about 5 h. We finally reached Etna’s summit two weeks later and found an unexpected pyroclastic density current (PDC) deposit covering the southern lava flow at its middle portion. We performed unoccupied aerial system and field surveys to reconstruct in 3D the SEC, lava flows, and PDC deposits and to collect some samples. The data allowed for detailed mapping, quantification, and characterization of the products. The resulting lava flows and PDC deposit volumes were (1.54 ± 0.47) × 106 m3 and (1.30 ± 0.26) × 105 m3, respectively. We also analyzed ground-radar and satellite data to evaluate that the plume height ranges between 10 and 15 km. This work is a comprehensive analysis of the fieldwork, UAS, volcanic tremor, infrasound, radar, and satellite data. Our results increase awareness of the volcanic activity and potential dangers for visitors to Etna’s summit area.
      124  50
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Quantifying Strombolian Activity at Etna Volcano

    Understanding the dynamics of mild explosive activity is a fundamental tool for hazard assessment at open conduit volcanoes. This is a particularly critical task for Etna volcano. Etna is in fact characterized by frequent, mild explosive activity, punctuated by lava flows and paroxysmal events (‘lava fountains’), which, because of their greater impact, have been the main target for hazard studies, whereas more frequent Strombolian activity has been overlooked. As a result, their impact and associated hazards have been never quantified, despite the extensive monitoring and surveillance activities carried out on this volcano. In this paper, we analyze video recordings of a sequence of Strombolian explosions occurring at the summit craters of Mt. Etna, in Italy, in February 2020. Data were also integrated with a petrographic analysis of collected samples, and drone surveys were performed at the same time as the video recordings. We estimate the frequency of explosions (20–12 per min); particle exit speeds (1–50 m/s), and erupted mass (100–102 kg) of those explosions. A very regular, small-scale activity (marked by a single burst of gas breaking the magma free surface into bombs and lapilli fragments) was occasionally punctuated by larger explosions, (at least one every 5 min), with a longer duration, fed by larger magma volumes, and consisting of two to three distinct pulses followed by a stationary phase. We found that the repose times between explosions follows a log logistic distribution, which is in agreement with the behavior of open vent explosive activity. The four largest explosions of the sequence were analyzed in detail:
      591  141
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Shallow factors controlling the explosivity of basaltic magmas: The 17–25 May 2016 eruption of Etna Volcano (Italy)

    We present a detailed physical and geochemical analysis of a small-scale eruption at the type basaltic volcano, Mount Etna, Italy, that spanned 9 days in May 2016. A complexity rarely seen within the short timeframe was present with the style of activity manifesting as outgassing, strombolian explosions to weak fountaining, and lava flows, while the eruption migrated between most of the summit craters. Through microprobe analysis of phenocrysts, groundmass glasses and melt inclusions we define geochemical trends by differentiating the eruptive products into two groups - the explosive tephra produced by lava fountaining, and lava and scoria emitted during Strombolian explosions. We highlight plagioclase and olivine compositions and variations in glass compositions as evidence for the eruption of multiple magma bodies. The eruptive sequence was triggered and fed by a batch of magma reaching the surface after limited degassing and crystallisation. Despite its small mass (about 0.01% of the total erupted magma), it generated three lava fountains occurring within a four-day timespan, producing ash-rich plumes which reached heights of a few km above the vent. The same batch destabilised a much larger mass (the remaining 99.99%) of crystal-richer magma stored at shallow depth that then erupted as lava from the same vent system in temporal continuity with the initial batch. The eruption was concluded by minor spattering and final Strombolian activity. The compositions of the magma batches suggest that the shallow magma reservoir likely exists as a network of interconnected dykes, probably fed by the same that partly erupted in the years/months preceding the May 2016 eruption. Variation in explosivity of the eruption was directly controlled by pre-eruptive degassing histories of each magma batch.
      414  5
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Corrigendum to “Assessing tephra total grain-size distribution: Insights from field data analysis” [Earth Planet. Sci. Lett. 443 (2016) 90–107]

    Corrigendum to “Assessing tephra total grain-size distribution: Insights from field data analysis” [Earth Planet. Sci. Lett. 443 (2016) 90–107]
      61  9
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    MeMoVolc report on classification and dynamics of volcanic explosive eruptions

    Classifications of volcanic eruptions were first introduced in the early twentieth century mostly based on qualitative observations of eruptive activity, and over time, they have gradually been developed to incorporate more quantitative descriptions of the eruptive products from both deposits and observations of active volcanoes. Progress in physical volcanology, and increased capability in monitoring, measuring and modelling of explosive eruptions, has highlighted shortcomings in the way we classify eruptions and triggered a debate around the need for eruption classification and the advantages and disadvantages of existing classification schemes. Here, we (i) review and assess existing classification schemes, focussing on subaerial eruptions; (ii) summarize the fundamental processes that drive and parameters that characterize explosive volcanism; (iii) identify and prioritize the main research that will improve the understanding, characterization and classification of volcanic eruptions and (iv) provide a roadmap for producing a rational and comprehensive classification scheme. In particular, classification schemes need to be objective-driven and simple enough to permit scientific exchange and promote transfer of knowledge beyond the scientific community. Schemes should be comprehensive and encompass a variety of products, eruptive styles and processes, including for example, lava flows, pyroclastic density currents, gas emissions and cinder cone or caldera formation. Open questions, processes and parameters that need to be addressed and better characterized in order to develop more comprehensive classification schemes and to advance our understanding of volcanic eruptions include conduit processes and dynamics, abrupt transitions in eruption regime, unsteadiness, eruption energy and energy balance.
      374  11
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Assessing tephra total grain-size distribution: Insights from field data analysis

    The Total Grain-Size Distribution (TGSD) of tephra deposits is crucial for hazard assessment and provides fundamental insights into eruption dynamics. It controls both the mass distribution within the eruptive plume and the sedimentation processes and can provide essential information on the fragmentation mechanisms. TGSD is typically calculated by integrating deposit grain-size at different locations. The result of such integration is affected not only by the number, but also by the spatial distribution and distance from the vent of the sampling sites. In order to evaluate the reliability of TGSDs, we assessed representative sampling distances for pyroclasts of different sizes through dedicated numerical simulations of tephra dispersal. Results reveal that, depending on wind conditions, a representative grain- size distribution of tephra deposits down to ∼100 μm can be obtained by integrating samples collected at distances from less than one tenth up to a few tens of the column height. The statistical properties of TGSDs representative of a range of eruption styles were calculated by fitting the data with a few general distributions given by the sum of two log-normal distributions (bi-Gaussian in Φ-units), the sum of two Weibull distributions, and a generalized log-logistic distribution for the cumulative number distributions. The main parameters of the bi-lognormal fitting correlate with height of the eruptive columns and magma viscosity, allowing general relationships to be used for estimating TGSD generated in a variety of eruptive styles and for different magma compositions. Fitting results of the cumulative number distribution show two different power law trends for coarse and fine fractions of tephra particles, respectively. Our results shed light on the complex processes that control the size of particles being injected into the atmosphere during volcanic explosive eruptions and represent the first attempt to assess TGSD on the basis of pivotal physical quantities, such as magma viscosity and plume height. Our empirical method can be used to assess the main features of TGSD necessary for numerical simulations aimed to real-time forecasting and long-term hazard assessment when more accurate field-derived TGSDs are not available.
      94  204
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Quantifying unsteadiness and dynamics of pulsatory volcanic activity

    Pulsatory eruptions are marked by a sequence of explosions which can be separated by time intervals ranging from a few seconds to several hours. The quantification of the periodicities associated with these eruptions is essential not only for the comprehension of the mechanisms controlling explosivity, but also for classification purposes. We focus on the dynamics of pulsatory activity and quantify unsteadiness based on the distribution of the repose time intervals between single explosive events in relation to magma properties and eruptive styles. A broad range of pulsatory eruption styles are considered, including Strombolian, violent Strombolian and Vulcanian explosions. We find a general relationship between the median of the observed repose times in eruptive sequences and the viscosity of magma given by eta approximate to 100.t(median). This relationship applies to the complete range of magma viscosities considered in our study (10(2) to 10(9) Pas) regardless of the eruption length, eruptive style and associated plume heights, suggesting that viscosity is the main magma property controlling eruption periodicity. Furthermore, the analysis of the explosive sequences in terms of failure time through statistical survival analysis provides further information: dynamics of pulsatory activity can be successfully described in terms of frequency and regularity of the explosions, quantified based on the log-logistic distribution. A linear relationship is identified between the log-logistic parameters, mu and s. This relationship is useful for quantifying differences among eruptive styles from very frequent and regular mafic events (Strombolian activity) to more sporadic and irregular Vulcanian explosions in silicic systems. The time scale controlled by the parameter mu, as a function of the median of the distribution, can be therefore correlated with the viscosity of magmas; while the complexity of the erupting system, including magma rise rate, degassing and fragmentation efficiency, can be also described based on the log-logistic parameter s, which is found to increase from regular mafic systems to highly variable silicic systems. These results suggest that the periodicity of explosions, quantified in terms of the distribution of repose times, can give fundamental information about the system dynamics and change regularly across eruptive styles (i.e., Strombolian to Vulcanian), allowing for direct comparison and quantification of different types of pulsatory activity during these eruptions. (C) 2016 Elsevier B.V. All rights reserved.
      98  11
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    MeMoVolc consensual document: a review of cross-disciplinary approaches to characterizing small explosive magmatic eruptions

    A workshop entitled “Tracking and understanding volcanic emissions through cross37 disciplinary integration: A textural working group.” was held at the Université Blaise Pascal (Clermont-Ferrand, France) on the 6-7th November 2012. This workshop was supported by the European Science Foundation (ESF). The main objective of the workshop was to establish an initial advisory group to begin to define measurements, methods, formats and standards to be applied in the integration of geophysical, physical and textural data collected during volcanic eruptions so as to homogenize procedures to be applied and integrated during both past and ongoing events. The working group comprised a total of 35 scientists from six countries (France, Italy, Great Britain, Germany, Switzerland and Iceland). The group comprised eleven advisors from the textural analysis field, eleven from deposit studies, seven geochemists and six geophysicists. The four main aims were to discuss and define: 1) Standards, precision and measurement protocols for textural analysis; 2) Identify textural, field deposit, chemistry and geophysical parameters that can best be measured and combined; 3) Agree on the best delivery formats so that data can be sheared between, and easily used by, each group; 4) Review multi-disciplinary sampling and measurement routines currently used, and measurement standards applied, by each community. The group agreed that community-wide cross-disciplinary integration, centered on defining those measurements and formats that can be best combined, is an attainable but key global focus. Consequently, we prepared a final document to be used as the foundation for a larger, international textural working group to serve as the basis of fully realizing such a pandisciplinary goal in volcanology. Thus, we here report our initial conclusions and recommendations.
      583  752
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Determination of the largest clast sizes of tephra deposits for the characterization of explosive eruptions: a study of the IAVCEI commission on tephra hazard modelling

    The distribution of clasts deposited around a volcano during an explosive eruption typically contoured by isopleth maps provides important insights into the associated plume height, wind speed and eruptive style. Nonetheless, a wide range of strategies exists to determine the largest clasts, which can lead to very different results with obvious implications for the characterization of eruptive behaviour of active volcanoes. The IAVCEI Commission on Tephra Hazard Modelling has carried out a dedicated exercise to assess the influence of various strategies on the determination of the largest clasts. Suggestions on the selection of sampling area, collection strategy, choice of clast typologies and clast characterization (i.e. axis measurement and averaging technique) are given, mostly based on a thorough investigation of two outcrops of a Plinian tephra deposit from Cotopaxi volcano (Ecuador) located at different distances from the vent. These include: (1) sampling on a flat paleotopography far from significant slopes to minimize remobilization effects; (2) sampling on specified-horizontal-area sections (with the statistically representative sampling area depending on the outcrop grain size and lithic content); (3) clast characterization based on the geometric mean of its three orthogonal axes with the approximation of the minimum ellipsoid (lithic fragments are better than pumice clasts when present); and (4) use of the method of the 50th percentile of a sample of 20 clasts as the best way to assess the largest clasts. It is also suggested that all data collected for the construction of isopleth maps be made available to the community through the use of a standardized data collection template, to assess the applicability of the new proposed strategy on a large number of deposits and to build a large dataset for the future development and refinement of dispersal models.
      218  41
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The eruptive activity of 28 and 29 December 2002

    At 18:20 of 28 December 2002 an eruptive vent opened on the NE flank of the Sciara del Fuoco at 600 m asl, marking the onset of the 2002-2003 eruptive crisis of Stromboli volcano. The first eruptive hours were characterized by mild spattering and effusive activity from the new vent and the summit vent at crater 1. Gravitational instability processes also determined the partial collapse of NE walls of the summit cone (crater 1). Pyroclastic material partly accumulated on the NE part of the Sciara, and partly flowed down slope and reached the sea at Spiaggia dei Gabbiani forming a ~ 4m-thick, reddish avalanche, that was soon covered by a lava flow emitted in the following hours (Lodato et al., 2007). In this paper, we describe the first hours of activity trough eyewitnesses’ reports, geophysical monitoring, field and laboratory studies and of the erupted pyroclastic material and lava flows. Daily temperature measurements were carried out on the avalanche deposit formed by the flow of scoria along the Sciara, using a handheld thermal camera mainly during helicopter surveys. A fast cooling rate was typical of the deposit surface, and a slow cooling rate was representative of its inner portion.
      156  272