Skip to main content
The search returned 128 results
Now showing 1 - 10 of 128
  • Some of the metrics are blocked by your 
    Item type:Product, Access status: Open Access ,
      32  22
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismotectonics-Driven Estimation of b-Value: Implications for Seismic Hazard Assessment

    <jats:title>Abstract</jats:title> <jats:p>Taking full advantage of good-quality historical earthquake and seismogenic source data available for Italy (Catalogo Parametrico dei Terremoti Italiani [CPTI15] and Database of Individual Seismogenic Sources [DISS] databases), we tested the regional variability of the b-value of the Gutenberg–Richter law, focusing on the dominantly extensional, nearly 1200-km-long seismogenic corridor straddling the Apennines chain; an 18,200  km2 area generating about 45% of the seismic moment released countrywide. We carefully chose and tested the most appropriate completeness interval and completeness magnitude (Mc), and used the Lilliefors method, the Utsu test, and a bootstrap technique to verify the quality of our results and inferences. The 0.65 b-value we obtained is substantially lower than b-values used in Italian seismic hazard models, often close to 1.0; yet it predicts more accurately the observed Apennines earthquake record, suggesting that most currently adopted magnitude-frequency distributions underpredict events in the Mw range 6.0–7.1 and overpredict those in the range 5.2–5.5. We also highlight that the time, space, and magnitude distribution of the largest Italian earthquakes hardly follows the Gutenberg–Richter law: it rather favors a characteristic behavior. We contend that the b-value is too critical of a parameter for being calculated using statistically weak data sets, such as those resulting from overly detailed area-source models: one may end up characterizing low-hazard areas more accurately than high-hazard areas. Conversely, we advocate the use of fewer, larger area sources that fully exploit the current understanding of regional seismotectonics, as a way of obtaining more realistic regional hazard models.</jats:p>
      29  105
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Reappraising the seismogenic potential of a low-strain rate region: active faulting in the eastern Siena Basin (southern Tuscany, Italy)

    We investigated the active tectonics and earthquake potential of the eastern Siena Basin, a slowly deforming portion of southern Tuscany in the inner Northern Apennines. This region hosts several historical settlements and valuable cultural heritage, but also frequent background seismicity and rare damaging earthquakes in the Mw range 5.0-6.2. We describe in detail an active, capable, and seismogenic fault system that we identified in the eastern Siena Basin, a few kilometres south-east of the city of Siena, thanks to the presence of an active quarry (Cava Capanni) that exploits travertines of Middle Pleistocene-Holocene age. Travertines are unique rock masses that may preserve living evidence of active and seismogenic faulting, thus providing remarkable seismotectonic insight. The active fault system consists of at least two segments rupturing travertines younger than 45 ka, with a cumulative vertical displacement of 111 cm, and an estimated minimum slip rate of 0.02-0.03 mm/y. We maintain that this displacement is the result of at least three coseismic movements accompanied by clastic dykes injected within the fault damage zone due to liquefaction phenomena. The fault system is seen to extend east of the quarry, affecting Pliocene and Mesozoic deposits. The Cava Capanni fault system is evidence of a poorly understood but potentially seismogenic tectonic mechanism of regional extent. Its orientation and kinematics are compatible with the activity of faults that are oriented obliquely or orthogonally to the main chain axis, in contrast with the setting of the axial and outer zone of the Northern Apennines, where extension and compression are accommodated by Apennines-parallel faults.
      50  111
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Buried Alive: Imaging the 9 November 2022, Mw 5.5 Earthquake Source on the Offshore Adriatic Blind Thrust Front of the Northern Apennines (Italy)

    The prompt identification of faults responsible for moderate-to-large earthquakes is fundamental for understanding the likelihood of further, potentially damaging events. This is increasingly challenging when the activated fault is an offshore buried thrust, where neither coseismic surface ruptures nor GPS/InSAR deformation data are available after an earthquake. We show that on 9 November 2022, an Mw 5.5 earthquake offshore Pesaro ruptured a portion of the buried Northern Apennines thrust front (the Cornelia thrust system [CTS]). By post-processing and interpreting the seismic reflection profiles crossing this thrust system, we determined that the activated fault (CTS) is an arcuate 30-km-long, NW-SE striking, SW dipping thrust and that older structures at its footwall possibly influenced its position and geometry. The activation of adjacent segments of the thrust system is a plausible scenario that deserves to be further investigated to understand the full earthquake potential of this offshore seismogenic source.
      635  273
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    How do inherited dip-slip faults affect the development of new extensional faults? Insights from wet clay analog models

    The development of structurally controlled basins is frequently dominated by inherited geological and tectonic structures, especially when the affected region has undergone multiple tectonic phases. In this study we use physically scaled analog models to analyze the impact of inherited faults on the evolution of a new extensional fault system and its associated basin. In our experiments, we introduced inherited faults – bearing diverse geometries and orientations – cut through a homogeneous analog material (wet clay). After each experiment, we compare (a) how the inherited faults affected the inception and development of new faults and (b) the shape of the resulting basins, using a ‘reference model’ run without pre-existing faults. The results show that the orientation of pre-existing faults with respect to the extensional axis does affect the development of the new extensional structures. The main effects show up when the orientation of the pre-existing faults is closer to that expected for a fault that is optimally oriented (perpendicular) with respect to the direction of extension and has a dip close to an Andersonian extensional fault. Conversely, the impact on the resulting basin shape is more spatially complex, especially in the case of misoriented pre-existing faults. We also compare our experimental results with an analytical method based on the slip tendency theory. The application of our findings to selected natural cases demonstrates how one may interpret the occurrence, orientation, and activity of inherited faults by looking at the present-day geometry and wavelength of an extensional basin, particularly when newly formed extensional faults exhibit structurally unexpected trajectories.
      431  91
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Inferring the depth and magnitude of pre-instrumental earthquakes from intensity attenuation curves

    The Italian historical earthquake record is among the richest worldwide; as such it allows for the development of advanced techniques for retrieving quantitative information by calibration with recent earthquakes. Building on a pilot elaboration of northern Italian earthquakes, we developed a procedure for determining the hypocentral depth of all Italian earthquakes from macroseismic intensity data alone. In a second step the procedure calculates their magnitude, taking into account the inferred depth. Hypocentral depth exhibits substantial variability countrywide but has so far received little attention: pre-instrumental earthquakes were routinely “flattened” at the upper-crustal level (∼10 km), on the grounds that the calculation of hypocentral depth is heavily dependent on the largely unknown local propagation properties. We gathered a learning set of 42 earthquakes documented by reliable instrumental data and by numerous macroseismic intensity observations. We observe (1) that within 50 km from the epicenter the ground motion attenuation rate is primarily controlled by hypocentral depth and largely independent of magnitude, (2) that within this distance the fluctuations in crustal attenuation properties are negligible countrywide, and (3) that knowing both the depth and the expected epicentral intensity makes it possible to estimate a reliable magnitude.
      195  91
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The assessment of earthquake hazard in Italy: a review

    We present a review of the assessment of earthquake hazard in Italy, with special reference to the relationships between hazard models and building codes. After early attempts at hazard assessment in the 19th century, the 28 December 1908, Messina Straits earthquake prompted the inception of the first national seismic legislation, passed in early 1909. Nevertheless, the official building code started to be based on a truly scientific background only after 1980, when the catastrophic Irpinia (southern Italy) earthquake forced the qualified authority to accept a science-based assessment (statistics on the earthquake catalogue data) to support the implementation of the new national seismic zonation. Later on, between 1985 and 2000, the two basic components of seismic haz- ard assessment, namely the earthquake record and the distribution of earthquake sources, were greatly developed through investigations carried out by the Gruppo Nazionale Difesa dai Terremoti and by the Istituto Nazionale di Geofisica. Along with the improvement of basic data, the Italian seismological community started developing a new hazard model (PS4), based on the concept of seismotectonic probabilism, aimed at supplying the Italian Government with a solid reference frame for updating the seismic zonation and building code. Nevertheless, this goal was achieved only two decades later: on 31 October 2002 a moderate-size earthquake caused the death of 27 children and a teacher in a collapsed school of southern Italy, forcing the qualified authority to take a major step of modernization for the second time in 22 years. The entire Italian territory, including areas of rare and sparse seismicity, was subdivided into four seismic zones, mainly on the basis of PS4 results. In 2004, the Italian seismological community developed MPS04, a fully updated hazard model that was initially conceived only in view of updating the seismic zonation. In 2007, MPS04 was extended to provide design spectra for a new building code, which was finally adopted in 2009, following the disastrous L’Aquila (central Italy) earthquake. The experience of the European project for seismic hazard assessment named SHARE, completed in 2013, represented a step forward and put the basis for a new project, termed MPS19, designed specifically to provide a sound basis for updating the Italian building code.
      187  318
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Gas fields and large shallow seismogenic reverse faults are anticorrelated

    We investigated the spatial relationships among 18 known seismogenic faults and 1651 wells drilled for gas exploitation in the main hydrocarbon province of northern-central Italy, a unique dataset worldwide. We adopted a GIS approach and a robust statistical technique, and found a significant anticorrelation between the location of productive wells and of the considered seismogenic faults, which are often overlain or encircled by unproductive wells. Our observations suggest that (a) earthquake ruptures encompassing much of the upper crust may cause gas to be lost to the atmosphere over geological time, and that (b) reservoirs underlain by smaller or aseismic faults are more likely to be intact. These findings, which are of inherently global relevance, have crucial implications for future hydrocarbon exploitation, for assessing the seismic-aseismic behaviour of large reverse faults, and for the public acceptance of underground energy and CO2 storage facilities-a pillar of future low carbon energy systems-in tectonically active areas.
      85  187
  • Some of the metrics are blocked by your 
    Item type:Product, Access status: Open Access ,
      248  281
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    What Is an Exceptional Earthquake?

    On 8 September 2020, the Italian media reported that the Court of Rieti, central Italy, found guilty with imprisonment between five and nine years the five defendants for the collapse of two public housing buildings and the death of 18 people, following the 24 August 2016 Mw 6.0 Amatrice earthquake; the first of a long-lasting earth- quake sequence featuring nine Mw > 5 events, the largest being an Mw 6.5 near the town of Norcia (Fig. 1b,c). The court rejected a claim of exceptionality of the ground shaking put forward by the defendants and stated that the collapse was caused by “... well-identified design and building flaws, violating specific legal provisions and technical construction standards....”
      111  191