Lanzo, Giuseppe
16 results
Filters
Settings
The search returned 16 results
Now showing 1 - 10 of 16
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Dynamic characterization of fine-grained soils in Central Italy by laboratory testing
The investigation of soil response to dynamic loads is necessary to predict site-specific seismic hazard. This paper presents the results of cyclic and dynamic laboratory tests carried out after the 2016–2017 Central Italy Earthquake sequence, within the framework of the seismic microzonation studies of the most damaged municipalities in the area. The database consists of 79 samples investigated by means of dynamic resonant column tests, cyclic torsional shear tests or cyclic direct simple shear tests. Results are firstly analysed in terms of field and laboratory values of small-strain shear wave velocity, highlighting the influence of the sample disturbance and of the mean effective consolidation pressure. The cyclic threshold shear strains as a function of plasticity index are then compared with findings from the published literature and the outliers are analysed. Subsequently, the dynamic soil behaviour is investigated with reference to the small-strain damping ratio. Differences between results from different tests are analysed in the light of the loading frequencies. Finally, the database is used to develop a predictive model for soil nonlinear curves according to plasticity index, mean effective confining stress, and loading frequency. The model represents a useful tool to predict the nonlinear stress–strain behaviour of Central Italy soils, necessary to perform site-specific ground response analyses.68 2 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Site response analyses for complex geological and morphological conditions: relevant case-histories from 3rd level seismic microzonation in Central Italy
The paper presents the results of 5 case studies on complex site e ects selected within the project for the level 3 seismic microzonation of several municipalities of Central Italy dam- aged by the 2016 seismic sequence. The case studies are characterized by di erent geo- logical and morphological con gurations: Monte San Martino is located along a hill slope, Montedinove and Arquata del Tronto villages are located at ridge top whereas Capitignano and Norcia lie in correspondence of sediment- lled valleys. Peculiarities of the sites are constituted by the presence of weathered/jointed rock mass, fault zone, shear wave veloc- ity inversion, complex surface and buried morphologies. These factors make the de ni- tion of the subsoil model and the evaluation of the local response particularly complex and di cult to ascertain. For each site, after the discussion of the subsoil model, the results of site response numerical analyses are presented in terms of ampli cation factors and acceleration response spectra in selected points. The physical phenomena governing the site response have also been investigated at each site by comparing 1D and 2D numerical analyses. Implications are deduced for seismic microzonation studies in similar geological and morphological conditions.282 42 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Reconnaissance of 2016 Central Italy Earthquake Sequence
The Central Italy earthquake sequence nominally began on 24 August 2016 with a M6.1 event on a normal fault that produced devastating effects in the town of Amatrice and several nearby villages and hamlets. A major international response was undertaken to record the effects of this disaster, including surface faulting, ground motions, landslides, and damage patterns to structures. This work targeted the development of high-value case histories useful to future research. Subsequent events in October 2016 exacerbated the damage in previously affected areas and caused damage to new areas in the north, particularly the relatively large town of Norcia. Additional reconnaissance after a M6.5 event on 30 October 2016 documented and mapped several large landslide features and increased damage states for structures in villages and hamlets throughout the region. This paper provides an overview of the reconnaissance activities undertaken to document and map these and other effects, and highlights valuable lessons learned regarding faulting and ground motions, engineering effects, and emergency response to this disaster.162 4 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Interpreting the deformation phenomena triggered by the 2012 Emilia seismic sequence on the Canale Diversivo di Burana banks
L’ articolo descrive uno studio riguardante i fenomeni deformativi osservati dopo il sisma dell’Emilia del maggio 2012 lungo un tratto di argine del Canale Diversivo di Burana che ricade nell’abitato di Scortichino, frazione del comune di Bondeno (FE). In questa porzione del rilevato arginale sono state edificate oltre un centinaio di abitazioni ed alcune strutture di medio-piccole dimensioni adibite ad attività produttive o a deposito, molte delle quali sono risultate pesantemente danneggiate e dichiarate inagibili proprio a causa delle deformazioni e del sistema di fratture longitudinali presenti nel terreno in seguito al terremoto. Il contributo qui presentato si prefigge di analizzare la risposta sismica dell’argine durante la sequenza sismica del 2012, comprendere le cause dei dissesti nonché individuare le necessarie azioni di mitigazione e gli eventuali interventi di messa in sicurezza nei confronti di terremoti futuri. A questo scopo è stata condotta un’ampia campagna sperimentale di indagini in sito e in laboratorio, finalizzata alla ricostruzione di un accurato modello geotecnico per la valutazione delle condizioni di stabilità dell’argine in condizioni sismiche, portando in conto anche l’eventuale insorgenza di fenomeni di liquefazione nei terreni sabbiosi superficiali costituenti la fondazione del corpo arginale. L’ analisi illustrata è il risultato dell’attività di indagine svolta per più di un anno dal Gruppo di Lavoro Argini (GdLA), costituitosi nel luglio 2012 in seguito ad un accordo fra la Regione Emilia-Romagna e l’Associazione Geotecnica Italiana per la verifica delle condizioni di stabilità dei rilevati arginali nelle aree colpite dal terremoto.188 258 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Geotechnical characterization of the aterno valley for site response analyses
The paper reports about the in-situ and laboratory tests executed in the aftermath of the April 6, 2009 L’Aquila earthquake, aimed at contributing to the definition of geotechnical models for site response analyses in the Aterno valley. The investigation started immediately after the earthquake and was entrusted by the Civil Protection Department to different public institutions and private companies; the experimental activities here reported were coordinated by the Italian Geotechnical Society. In the paper, after briefly depicting the geological setting of the L’Aquila basin and the Aterno river valley, an overview of their subsoil conditions is given, based on the geotechnical tests executed before the 2009 earthquake. Thereafter, the specific investigations planned for the characterization of reconstruction sites and seismic microzonation are widely described. The in situ tests consisted of seismic dilatometer and multi-receiver surface wave tests; the resulting shear wave velocity profiles were compared each other, and against independent Down-Hole tests and ambient noise measurements. The laboratory investigation included cyclic/dynamic simple/torsional shear tests on undisturbed samples. The results, summarized in terms of variation of stiffness and damping with shear strain, highlighted some peculiar properties of the soils in the Aterno valley, which could be related to their index properties.146 4 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Ground motion recordings from the MW 6.3 2009 L’Aquila earthquake in Italy and their engineering implications
The 2009 L’Aquila earthquake sequence includes the April 6 Mw 6.3 main shock and triggered events on April 7 and 9, each recorded on a digital network having five stations on the hanging wall of the main shock fault. We describe a geometric source model drawing upon inversions by others. We describe record-specific ground motion data processing that includes the incorporation of static displacements of up to 13 cm (downdrop of hanging wall). The resulting database includes 47, 38, and 31 corrected triaxial recordings from the April 6, 7, and 9 events, respectively. We present site conditions for recording stations, including recent surface wave and borehole geophysics. We demonstrate that the high-frequency data are weaker than expected for normal fault earthquakes of these magnitudes and that the data attenuate with distance at rates generally consistent with modified next generation attenuation (NGA) equations for Italy that were available prior to the event.243 21 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The recording stations of the Italian strong motion network: geological information and site classification
(2011-12); ; ; ; One of the main objectives of the ITACA (ITalian ACcelerometric Archive) strong motion database, promoted by the Italian Department of Civil Protection, was to improve the characterization of the recording sites from a geological and geophysical point of view and to provide their seismic classification according to the seismic norms pertinent to Italy, namely the Eurocode 8 and the National Technical Norms for Constructions. A standard format to summarize the available information for the recording stations was first produced, in terms of a technical report dynamically linked to the database, i.e., some of the relevant information is automatically updated when the corresponding fields of the database are modified. Then, an important activity of collection, qualification and synthesis of available data was carried out, especially for stations that recorded the strongest earthquakes in Italy in the last 40 years, and for which a relevant number of studies have been published. In spite of this activity, among the more than 700 strong motion stations present in the ITACA database, only a limited number of them could be characterized by quantitative information on subsurface soil properties. For this reason, a dual seismic site classification criterion was implemented, either based on the standard Vs,30 scheme, or, in the absence of such information, based on an expert opinion supported by shallow geology maps, mostly at 1:100,000 scale, and when available on the H/V ratios calculated on recordings. Owing to the relevance in the Italian geographic and morphological context, a special care was also given to the topographic classification of stations, based on suitable criteria developed within a GIS environment.359 295 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The Aterno valley strong-motion array: seismiccharacterization and determination of subsoil model
(2011-12); ; ; ; The paper focuses on the strong motion array deployed in the upper Aterno River Valley, in the immediate outskirts north-west of the town of L’Aquila, which is part of the Italian Strong Motion Network operated by the Department of Civil Protection. The array is composed of six accelerometric stations located along a cross section of the valley. The importance of this array relies on the fact that a large amount of high-quality records were obtained during the 2009 L’Aquila seismic sequence, from both the mainshock and several aftershocks. These data are especially important to investigate site effects in sediment-filled valleys during moderate earthquakes in epicentral area because well-documented observational studies are very limited in the literature. However, the main drawback for the study of site effects in the Aterno valley is the lack of a detailed knowledge of the geometry of the valley, soil layering and dynamic properties of materials. The main motivation for this study stems from the need to provide a reliable subsoil model of the valley coupled with high-quality strong motion data. Based on the above, in the framework of S4 project, a major effort was undertaken to get a trustworthy cross section of the valley by an ad hoc investigation, comprising geological and geotechnical surveys as well as an extensive geophysical campaign, characterized by both active and passive measurements. These results were complemented by additional geological and geotechnical data available in the literature. By merging all the information acquired, a 2D subsoil model of the transversal section of the upper Aterno valley has been produced. The valley is characterised by an asymmetric shape with a shallower rock basement at the western edge of the valley that deepens at the valley centre. Moreover, based on the results of geophysical tests, representative Vs values were assigned to the different lithologic units forming the alluvial deposits filling the valley. Shear wave velocity is a fundamental parameter for ground response studies and it is also effective in classifying the accelerometric station from a seismic point of view. The 2D model may be therefore, considered a benchmark model for future studies of site effects. It will offer the possibility to examine site effects with a complex underlying geology and to validate the results of numerical simulations of site response analyses with the numerous observations from earthquake recordings, both for weak and strong ground motion conditions.289 2009 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Revised seismic classification of the ITACA stations, according to the EC8 and the Italian norms site classes
(2010-06); ; ; ; The activities carried out within Task 2 aim to collect, organize and synthesize geological, geomorphological, geotechnical and geophysical data for the location site of the Accelerometric National Network (RAN) stations in Italy, managed by the Department of Civil Protection, to improve the knowledge about the subsoil (see Delverable D05) and to permit a subsoil and topographic site classification based on EC8 categories. At the end of the project the subsoil of 695 stations have been classified using an hybrid approch, based on surface geology, spectral classification and Vs profils from different recording tecniques (DH, CH, MASW, ESAC). These activities have been useful to link the ITACA database with the software REXEL to select natural accelerograms, compatible with Norme Tecniche per le Costruzioni (NTC2008) and EUROCODE 8 (EC8) spectra, which may also reflect characteristics of the source in terms of magnitude and epicentral distance. For 688 station sites have been provided also a topographic classification using a GIS based semiautomatic method with “by-hand” corrections using topographic maps and/or Google Earth software. A Microsoft Excel Database which also allows to track all changes that have been made since the beginning of the project related to the site classification has been developed.196 1088 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Seismological and geotechnical aspects of the Mw=6.3 l’Aquila earthquake in central Italy on 6 April 2009
(2010-04-22); ; ; ; The L’Aquila earthquake occurred on April 6 2009 at 03:32:39 local time. The earthquake (Mw=6.3) was located in the central Italy region of Abruzzo. Much of the damage occurred in the capital city of L’Aquila, a city of approximate population 73000, although many small villages in the surrounding region of the middle Aterno river valley were also significantly damaged. In the weeks following the earthquake, the Geo-Engineering Extreme Events Reconnaissance (GEER) international team, comprised of members from different European countries and the U.S., was assembled to provide post-earthquake field reconnaissance. The GEER team focused on the geological, seismological, and geotechnical engineering aspects of the event. We describe the principal seismological findings related to this earthquake including moment tensors of the main shock and two triggered events, the aftershock pattern and its variation with time, tectonic deformations associated with the main shock, surface fault rupture, and the inferred fault rupture plane. We describe damage patterns on a village-to-village scale and on a more local scale within the city of L’Aquila. In many cases the damage patterns imply site effects, as neighbouring villages on rock and soil had significantly different damage intensities (damage more pronounced on softer sediments). The April 6 mainshock was the best-recorded event to date in Italy. We present metadata related to the recording sites and then present preliminary comparisons of the data to GMPEs. Those comparisons support the notion of faster distance attenuation in Italy relative to the average for active regions as reflected in NGA GMPEs. Several incidents of ground failure are then discussed, including a number of rockfalls and minor landslides. Perhaps the most significant incidents of ground failure occurred at Lake Sinizzo, for which we describe a number of slumps and spreads around the lake perimeter. This is documented using field observations as well as LIDAR and bathymetric data.353 716
