Skip to main content
The search returned 10 results
Now showing 1 - 10 of 10
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The new seismic catalog of the Gargano area (Southern Italy) after a decade of seismic monitoring by OTRIONS network

    (Göttingen: Copernicus Publications, 2026-05-13)
    Ferreri, Andrea Pio
    ;
    ;
    Giannuzzi, Rossella
    ;
    ;
    The Gargano Promontory (hereafter GP) has attracted the attention of seismologists in recent years for its peculiarities regarding the high rate of low-magnitude seismicity and focal depths in the lower crust. These peculiarities have been highlighted thanks to the new data provided by the OTRIONS seismic network (hereafter OT), installed in 2013 in the GP area, consisting of 15 short-period seismometers, thanks to a fruitful collaboration between UniBa (University of Bari Aldo Moro) and INGV (Istituto Nazionale di Geofisica e Vulcanologia). The first available seismic catalog referred to the first 7 years of the network operation (2013–2018) and suffered from some technological problems of the acquisition system. Thanks to improvements in the data transmission system, these problems were overcome in 2019 and now the OT network data are available in real time. In order to include the most recent seismicity and to cover the temporal gaps existing in the previous catalog, we thoroughly reviewed the 24 h seismic recordings, collected over the decade after the installation, by employing an automatic detect and picking software (CASP, Complete Automatic Seismic Processor). More than 7100 seismic events were initially identified. Through careful manual review, approximately 60 % were confirmed as local earthquakes, and the others were recognized as quarry blasts or false/poorly-located events. Manual review significantly improved the quality of P- and S-phase picking, and consequently led to more accurate earthquake locations, using both linearized and nonlinear algorithms. The manual review resulted in two catalogs, both released on Mendeley Data (Ferreri et al., 2026) (https://doi.org/10.17632/nhfvx7ysxw.6). This study highlights the value of automatic analysis for compiling a seismic catalog, suggesting that the manual review is still necessary. The quality of the catalogs was assessed in detail using statistical parameters and a new formula for the location quality. The completeness magnitude of the new catalogs is as low as 0.82. The noise affecting the network was also evaluated. This study confirms the importance of the OT local network for seismic hazard analysis and provides a useful dataset for seismotectonic and geophysical studies in a long under-monitored region.
      4  7
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismicity of the Gargano promontory (Southern Italy) after 7 years of local seismic network operation: Data release of waveforms from 2013 to 2018

    The University of Bari (Italy), in cooperation with the National Institute of Geophysics and Volcanology (INGV) (Italy), has installed the OTRIONS micro-earthquake network to better understand the active tectonics of the Gargano promontory (Southern Italy). The OTRIONS network operates since 2013 and consists of 12 short period, 3 components, seismic stations located in the Apulian territory (Southern Italy). This data article releases the waveform database collected from 2013 to 2018 and describes the characteristics of the local network in the current configuration. At the end of 2018, we implemented a cloud infrastructure to make more robust the acquisition and storage system of the network through a collaboration with the RECAS-Bari computing centre of the University of Bari (Italy) and of the National Institute of Nuclear Physics (Italy). Thanks to this implementation, waveforms recorded after the beginning of 2019 and the station metadata are accessible through the European Integrated Data Archive (EIDA, https://www.orfeus-eu.org/data/eida/nodes/INGV/).
      273  181
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A first look at the Gargano (southern Italy) seismicity as seen by the local scale OTRIONS seismic network

    OnApril 2013,alocal scale seismic network,namedOTRIONS, composed of twelve short period (1 Hz) three component seismometers, has been located in the northern part of the Apulia (Southern Italy). At each station, the acquisition systemallows the recording of data in situ and their real time transfer toa seismic laboratory located at the Dipartimento di Scienze della Terra e Geoambientali of Università di Bari "Aldo Moro". The preliminary real time detection and localization of the events is automatically realized by using the SeisComp3 software. In the first two months of data acquisition, the network recorded about one hundred low magnitude (ML<2) earthquakes. In that follows,wepresent the results of a study aimed at investigating the crustal structure of the Gargano promontory. To this aimweanalyzed the seismic events recorded in the area by the “Istituto Nazionale di Geofisica e Vulcanologia” (INGV) in the period 2006-2012 and the seismic events recorded by the OTRIONS network in the first two months of acquisition (march and april 2013). From the inversion of P and S travel times of INGV events we inferred a preliminary 3-layer Vp velocity model. The Moho is located at a depth of 27-30 km, in agreement with previous studies. A linearized inversion scheme that uses Velest (Kissling et al., 1994), allowed us to infer a 1D velocity model from the joint inversion of INGV and OTRIONS datasets of P and S travel times. On the whole, the number of earthquakes recorded by the OTRIONS seismic network is higher than 1200 in the period april,2013-march,2014.
      322  655
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A first look at the Gargano (southern Italy) seismicity as seen by the local scale OTRIONS seismic network

    On April 2013, a local scale seismic network, named OTRIONS, composed of twelve short period (1 Hz) three component seismometers, has been located in the northern part of the Apulia (southern Italy). In the first two months of data acquisition, the network recorded about one hundred very small (ML<2) magnitude earthquakes. A three-layer 1D VP velocity model was preliminarily computed, using the recordings of earthquakes occurred in the area in the period 2006-2012 and recorded by the national seismic network of INGV (Istituto Nazionale di Geofisica e Vulcanologia). This model was calibrated by means of a multi-scale approach, based on a global search of the minimum misfit between observed and theoretical travel times. At each step of the inversion, a grid-search technique was implemented to infer the elastic properties of the layers, by using HYPO71 to compute the forward models. In a further step, we used P and S travel times of both INGV and OTRIONS events to infer a minimum 1D VP velocity model, using a classical linearized inversion approach. Owing to the relatively small number of data and poor coverage of the area, in the inversion procedure, the VP/VS ratio was fixed to 1.82, as inferred from a modified Wadati diagram. The final 1D velocity model was obtained by averaging the inversion results arising from nine different initial velocity models. The inferred VP velocity model shows a gradual increase of P wave velocity with increasing the depth. The model is well constrained by data until to a depth of about 25-30 km.
      572  371
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Fault plane orientations of microearthquakes at Mt. Etna from theinversion of P-wave rise times

    A crucial point in the analysis of tectonic earthquakes occurring in a volcanic area is the inference of the orientation of the structures along which the ruptures occur. These structures represent zones of weakness which could favor the migration of melt toward the surface and the assessment of their geometry is a fundamental step toward efficient evaluation of volcanic risk. We analyzed a high-quality dataset of 171 lowmagnitude, tectonic earthquakes that occurred at Mt. Etna during the 2002–2003 eruption. We applied a recently developed technique aimed at inferring the source parameters (source size, dip and strike fault) and the intrinsic quality factor Qp of P waves from the inversion of rise times. The technique is based on numerically calibrated relationships among the rise time of first P waves and the source parameters for a circular crack rupturing at a constant velocity. For the most of the events the directivity source effect did not allow us to constrain the fault plane orientation. For a subset of 45 events with well constrained focal mechanisms we were able to constrain the “true” fault plane orientation. The level of resolution of the fault planes was assessed through a non linear analysis based on the random deviates technique. The significance of the retrieved fault plane solutions and the fit of the assumed source model to data were assessed through a χ-square test. Most of the retrieved fault plane solutions agree with the geometrical trend of known surface faults. The inferred source parameters and Qp are in agreement with the results of previous studies
      265  23
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    3D tomographic imaging of the southern Apennines (Italy): A statistical approach to estimate the model uncertainty and resolution

    A new dataset of first P-wave arrival times is used to derive the 3D tomographic model of the Campania-Lucania region in the southern Apennines (Italy). We address the issue related to the non-uniqueness of the tomographic inversion solution through massive numerical experimentation based on the global exploration of the model parameter space starting from a large variety of physically plausible initial models. The average of all the realizations is adopted as the best-fit solution and the uncertainty of the model parameters is studied using a statistical approach based on a Monte Carlo-type analysis. How the uncertainty in the initial model, earthquake locations, and data influences the inversion result is studied by considering separately the individual effects. Checkerboard tests are performed to estimate the resolving power of the dataset. Re-located seismicity in a reliable new 3D tomographic model allows us to correlate the earthquake distribution with the main seismogenic structures present in the area.
      188  29
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Earthquake focal mechanisms and stress inversion in the Irpinia Region (southern Italy)

    (2009) ; ; ; ;
    Pasquale, G.; Dipartimento di Studi Geologici ed Ambientali,Università degli Studi del Sannio, Benevento, Italy
    The goal of this study was to estimate the stress field acting in the Irpinia Region, an area of southern Italy that has been struck in the past by destructive earthquakes and that is now characterized by low to moderate seismicity. The dataset are records of 2,352 aftershocks following the last strong event: the 23 November 1980 earthquake (M 6.9). The earthquakes were recorded at seven seismic stations, on average, and have been located using a three-dimensional (3D) P-wave velocity model and a probabilistic, non-linear, global search technique. The use of a 3D velocity model yielded amore stable estimation of take-off angles, a crucial parameter for focal mechanism computation. The earthquake focal mechanisms were computed from the P-wave first-motion polarity data using the FPFIT algorithm. Fault plane solutions show mostly normal component faulting (pure normal fault and normal fault with a strikeslip component). Only some fault plane solutions show strike-slip and reverse faulting. The stress field is estimated using the method proposed by Michael (J Geophys Res 92:357–368, 1987a) by inverting selected focal mechanisms, and the results show that the Irpinia Region is subjected to a NE–SW extension with horizontal σ3 (plunge 0◦, trend 230◦) and subvertical σ1 (plunge 80◦, trend 320◦), in agreement with the results derived from other stress indicators.
      217  43
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    An advanced seismic network in the Southern Apennines (Italy) for seismicity investigations and experimentation with earthquake early warning.

    The last strong earthquake that occurred in the southern Apennines, the Irpinia earthquake on 23 November 1980 (M 6.9), was characterized by a complex rupture mechanism that ruptured three different faults (Bernard and Zollo 1989). This earthquake was well studied, and the quantity of data available has allowed a very detailed definition of the geometry and mechanisms of faults activated during this seismic event (Westaway and Jackson 1987; Pantosti and Valensise 1990). Even more than 20 years after the main event, the seismotectonic environment that contains the fault system on which the 1980 earthquake occurred shows continued background seismic activity including moderate-sized events such as the 1996 (M 5.1), 1991 (M 5.1) and 1990 (M 5.4) events. Moreover, the locations of the microearthquakes (taken from the database of the Istituto Nazionale di Geofisica e Vulcanologia, INGV) define an epicentral area with a geometry and extent surprisingly similar to that of the 1980 earthquake and its aftershocks (figure 1A). These simple observations suggest that it may be possible to study the preparation cycles of strong earthquakes on active faults by studying the microseismicity between seismic events. With this in mind, a seismic network of large dynamic range was planned and is now in an advanced phase of completion in the southern Apennines. Called ISNet (Irpinia Seismic Network), it is equipped with sensors that can record high-quality seismic signals from both small-magnitude and strong earthquakes, from which it will be possible to retrieve information about the rupture process and try to understand the scaling relationships between small and large events. Due to its high density, wide dynamic range, and advanced data-acquisition and data-transmission technologies, the network is being upgraded to become the core infrastructure of a prototype system for seismic early warning and rapid post-event ground-shaking evaluation in the Campania region, which has seismic hazard that ranks among the highest in Italy (Cinti et al. 2004). ISNet will be devoted to real-time estimation of earthquake location and magnitude and to measuring peak ground-motion parameters so as to provide rapid ground-shaking maps for the whole of the Campania region. The information provided by ISNet during the first seconds of a potentially damaging seismic event can be used to activate several types of security measures, such as the shutdown of critical systems and lifelines (Iervolino et al. 2006). The implementation of a modern seismic network involves many different research and technological aspects related to the development of sophisticated data management and processing. The communication systems need to rapidly generate useful, robust, and secure alert notifications. Here we provide a general technical and seismological overview of ISNet's complex architecture and implementation.
      591  38
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Development and Testing of an Advanced Monitoring Infrastructure (ISNet) for Seismic Early-warning Applications in the Campania Region of Southern Italy

    In the framework of an ongoing project financed by the Campania Region, a prototype system for seismic early and post-event warning is being developed and tested, based on a dense, wide dynamic seismic network (ISNet) and under installation in the Apennine belt region. This paper reports the characteristics of the seismic network, focussing on the required technological innovation of the different seismic network components (data-logger, sensors and data communication). To ensure a highly dynamic recording range, each station is equipped with two types of sensors: a strong-motion accelerometer and a velocimeter. Data acquisition at the seismic stations is performed using Osiris-6 model data-loggers made by Agecodagis. Each station is supplied with two (120 W) solar panels and two 130 Ah gel cell batteries, ensuring 72-h autonomy for the seismic and radio communication equipment. The site is also equipped with a GSM/GPRS programmable control/alarm system connected to several environmental sensors (door forcing, solar panel controller, battery, fire, etc) and through which the site status is known in real time. The data are stored locally on the hard-disk and, at the same time, continuously transmitted by the SeedLink protocol to local acquisition/analysis nodes (Local Control Center) via Wireless LAN bridge. At each LCC site runs a linux Earthworm system which stores and manages the acquired data stream. The real-time analysis system will perform event detection and localization based on triggers coming from data-loggers and parametric information coming from the other LCCs. Once an event is detected, the system will performs automatic magnitude and focal mechanism estimations. In the immediate post-event period, the RISSC performs shaking map calculations using parameters from the LCCs and/or data from the event database. The recorded earthquake data are stored into an event database, to be available for distribution and visualization for further off-line analyses. The seismic network will be completed in two stages: • Deployment of 30 seismic stations along the southern Apennine chain (to date almost completed) • Setting up a carrier-class radio communication system for fast and reliable data transmission, and installation of 10 additional seismic stations.
      239  70
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    A Strong Motion Attenuation Relation for Earlywarning Application in the Campania Region (Southern Apennines)

    For early-warning applications in particular, the reliability and efficiency of rapid scenario generation strongly depend on the availability of reliable strong ground-motion prediction tools. If shake maps are used to represent patterns of potential damage as a consequence of large earthquakes, attenuation relations are used as a tool for predicting peak ground-motion parameters and intensities. One of the limitations in the use of attenuation relations is that these have only rarely been retrieved from data collected in the same tectonic environment in which the prediction has to be performed. As a consequence, strong ground motion can result in underestimations or overestimations with respect to the recorded data. This also holds for Italy, and in particular for the Southern Apennines, due to limitations in the available databases, both in terms of distances and magnitude. Moreover, for “real-time” early-warning applications, it is important to have attenuation models for which the parameters can be easily upgraded when new data are collected, whether this has to be done during the earthquake rupture occurrence or in the post-event, when all the strong motion waveforms are available. Here we present a strong-motion attenuation relation for early-warning applications in the Campania region (Southern Apennines), Italy. The model has a classical analytical formulation, and its coefficients were retrieved from a synthetic strong-motion database created by using a stochastic approach. The input parameters for the simulation technique were obtained through the spectral analysis of waveforms of earthquakes recorded by the Istituto Nazionale di Geofisica e Vulcanologia (INGV) network for a magnitude range Md (1.5,5.0) in the last fifteen years, and they have been extrapolated to cover a larger range. To validate the inferred relation, comparisons with two existing attenuation relations are presented. The results show that the calibration of the attenuation parameters, i.e., geometric spreading, quality factor Q, static stress drop values along with their uncertainties, are the main concern.
      136  23