Development and Testing of an Advanced Monitoring Infrastructure (ISNet) for Seismic Early-warning Applications in the Campania Region of Southern Italy
Author(s)
Editor(s)
Language
English
Obiettivo Specifico
4.1. Metodologie sismologiche per l'ingegneria sismica
Status
Published
Pages Number
325 - 341
Refereed
No
Date Issued
2007
Abstract
In the framework of an ongoing project financed by the Campania Region,
a prototype system for seismic early and post-event warning is being developed
and tested, based on a dense, wide dynamic seismic network (ISNet)
and under installation in the Apennine belt region.
This paper reports the characteristics of the seismic network, focussing
on the required technological innovation of the different seismic network
components (data-logger, sensors and data communication).
To ensure a highly dynamic recording range, each station is equipped
with two types of sensors: a strong-motion accelerometer and a velocimeter.
Data acquisition at the seismic stations is performed using Osiris-6
model data-loggers made by Agecodagis. Each station is supplied with two
(120 W) solar panels and two 130 Ah gel cell batteries, ensuring 72-h
autonomy for the seismic and radio communication equipment. The site is
also equipped with a GSM/GPRS programmable control/alarm system
connected to several environmental sensors (door forcing, solar panel controller,
battery, fire, etc) and through which the site status is known in real
time.
The data are stored locally on the hard-disk and, at the same time, continuously
transmitted by the SeedLink protocol to local acquisition/analysis nodes (Local Control Center) via Wireless LAN bridge. At
each LCC site runs a linux Earthworm system which stores and manages
the acquired data stream.
The real-time analysis system will perform event detection and localization
based on triggers coming from data-loggers and parametric information
coming from the other LCCs. Once an event is detected, the system
will performs automatic magnitude and focal mechanism estimations. In
the immediate post-event period, the RISSC performs shaking map calculations
using parameters from the LCCs and/or data from the event database.
The recorded earthquake data are stored into an event database, to be
available for distribution and visualization for further off-line analyses.
The seismic network will be completed in two stages:
• Deployment of 30 seismic stations along the southern Apennine chain
(to date almost completed)
• Setting up a carrier-class radio communication system for fast and reliable
data transmission, and installation of 10 additional seismic stations.
a prototype system for seismic early and post-event warning is being developed
and tested, based on a dense, wide dynamic seismic network (ISNet)
and under installation in the Apennine belt region.
This paper reports the characteristics of the seismic network, focussing
on the required technological innovation of the different seismic network
components (data-logger, sensors and data communication).
To ensure a highly dynamic recording range, each station is equipped
with two types of sensors: a strong-motion accelerometer and a velocimeter.
Data acquisition at the seismic stations is performed using Osiris-6
model data-loggers made by Agecodagis. Each station is supplied with two
(120 W) solar panels and two 130 Ah gel cell batteries, ensuring 72-h
autonomy for the seismic and radio communication equipment. The site is
also equipped with a GSM/GPRS programmable control/alarm system
connected to several environmental sensors (door forcing, solar panel controller,
battery, fire, etc) and through which the site status is known in real
time.
The data are stored locally on the hard-disk and, at the same time, continuously
transmitted by the SeedLink protocol to local acquisition/analysis nodes (Local Control Center) via Wireless LAN bridge. At
each LCC site runs a linux Earthworm system which stores and manages
the acquired data stream.
The real-time analysis system will perform event detection and localization
based on triggers coming from data-loggers and parametric information
coming from the other LCCs. Once an event is detected, the system
will performs automatic magnitude and focal mechanism estimations. In
the immediate post-event period, the RISSC performs shaking map calculations
using parameters from the LCCs and/or data from the event database.
The recorded earthquake data are stored into an event database, to be
available for distribution and visualization for further off-line analyses.
The seismic network will be completed in two stages:
• Deployment of 30 seismic stations along the southern Apennine chain
(to date almost completed)
• Setting up a carrier-class radio communication system for fast and reliable
data transmission, and installation of 10 additional seismic stations.
Type
book chapter
File(s)![]()
Name
Weber, Iannaccone.pdf
Size
3.39 MB
Format
Adobe PDF
Checksum (MD5)
The MD5 message-digest algorithm can be used to verify the integrity of the file that you have uploaded. You can calculate its value locally via tools that are generally available in each operative system like md5sum
8da32e28c652536eb39e235837f5cc54
