Skip to main content
The search returned 91 results
Now showing 1 - 10 of 91
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Feasibility study of an integrated earthquake and tsunami early warning system Scientific Reports

    (London: Springer Nature London: Nature Publishing Group, 2025)
    Rea, Raffaele
    ;
    ; ; ;
    Current Tsunami Early Warning Systems (TEWS) aim to issue an initial alert within minutes after a seismic event, relying on rapid estimates of earthquake source parameters derived from teleseismic and regional seismic data. For coastal areas located in the near-distance range of a tsunamigenic source, reducing this alert time is critical to increase evacuation lead-time and enhance risk mitigation actions. In this study, we evaluate the integration of earthquake magnitude and location estimations from QuakeUp, an impact-based earthquake early warning system (EEWS), into a tsunami early warning system (TEWS) workflow. We investigate the trade-off between earliness and accuracy of the seismic source parameters and their impact on Probabilistic Tsunami Forecasting (PTF). A hindcast of the 30 October 2020 M w 7.0 Aegean Sea earthquake, whose tsunami reached nearby coasts within ~ 10 min demonstrated that QuakeUp can deliver stable and accurate hypocenter and magnitude estimates within ~ 40 s from origin time, comparable to those obtained by the Early-Est software within minutes, used operationally in the Mediterranean area. These rapid parameter estimates were used to run a PTF procedure, yielding runup predictions in reasonable agreement with observations. A second scenario, based on 150 simulated seismogram sets for Mw 6-7 earthquakes in the Messina Strait (Southern Italy) confirmed the ability of the integrated workflow to provide robust source estimates within one minute. This work represents the first demonstration of a combined EEWS-TEWS approach for near-field tsunamigenic earthquakes, highlighting its potential for dual risk mitigation. Tsunamis consist of a series of long-wavelength sea gravity waves that may hit the coasts causing loss of lives and damages to buildings and other infrastructures. These events can be generated by different processes (earthquakes, submarine landslides, volcanoes, or peculiar meteorological conditions). In the last two decades, several earthquakes generated destructive tsunamis that caused hundreds of thousands fatalities 1-3. The damages produced by this kind of events have been strongly mitigated by tsunami early warning systems (TEWS). These systems provide as fast and accurate as possible alerts to people on the coasts of the potentially impending waves. However, for coastlines very close to the epicentre, messages from the TEWS may be too late and the tsunami risk reduction must be based on people's reaction to natural signs 4. In the framework of the NorthEast Atlantic, Mediterranean and connected seas Tsunami Warning and Mitigation System (NEAMTWS) coordinated by IOC-UNESCO, five tsunami service providers (TSP) provide tsunami alert services: the French Tsunami Warning Center (CENALT) 5 , the Italian Tsunami Alert Center (CAT-INGV) 6 , the National Observatory of Athens (NOA) 7 , the Instituto Português do Mar e da Atmosfera (IPMA) 8 and the Kandilli Observatory and Earthquake Research Institute (KOERI) 9. Each of them uses a different seismic network tuned for their different monitoring zones, different seismic velocity models and software for the characterisation of the seismic parameters and (slightly, in some cases) different decision matrices 5-10. Among these TSPs, our analysis focuses on the Italian CAT-INGV. CAT-INGV issues tsunami alert messages based on earthquake parameter estimations provided by the Early-Est algorithm 11. Early-Est uses regional and teleseismic data to estimate earthquakes magnitude and hypocenter coordinates, which in the Mediterranean basin require three/four minutes from the origin time (OT) of the earthquake. These estimations feed a very conservative decision matrix 6 used to convert them into a tsunami warning. A new probabilistic tsunami forecasting algorithm (PTF) is expected to become operational in the CAT-INGV in 2025 12-14. For the chosen tsunami intensity metric (e.g. offshore amplitude), the PTF provides the probability distribution expected at
      2  16
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Non-linear elasticity, earthquake triggering and seasonal hydrological forcing along the Irpinia fault, Southern Italy

    Pump-probe experiments investigate the strain sensitivity of crustal elastic properties, showing nonlinear variations during the strain cycle. In the laboratory, pre-seismic reductions in seismic velocity indicate that asperity contacts within the fault zone begin to fail before the macroscopic frictional sliding. The recognition of such effects in natural seismic-cycles has been challenging. Here we exploit seasonal hydrological strains, performing a natural analogue to a quasi-static laboratory pump-probe experiment to investigate the nonlinear strain sensitivity of crustal rocks and its role in seismic failure along the tectonically-active Irpinia Fault System (Southern Italy). By comparing 14-years-long series of spring discharge, strain, seismic velocity variations and earthquakes rate, we find that seismicity peaks during maximum hydrological forcing and minimum seismic velocity. Seasonal strains of ~10-6 are required for both earthquake triggering and significant nonlinearity effects arising from modulus reduction. We suggest that, for faults in a critical state, cyclical softening may lead to failure and seasonal seismicity.
      8  91
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Decade-long monitoring of seismic velocity changes at the Irpinia fault system (southern Italy) reveals pore pressure pulsations

    (2022-01-24) ; ; ; ;
    Esposito, Roberta
    Several studies have monitored crustal seismic velocity changes and attempted to relate them to the stress state and physical properties in volume embedding fault systems. The aim is to provide constraints on fault system dynamics and earthquake triggering mechanisms. Here, we reconstruct the spatiotemporal (4D) seismic velocity images of volume embedding the Irpinia fault system (IFS, South Italy), which originated the 1980 Ms 6.9 multi-segmented ruptures. By inverting data from more than ten years of continuous seismicity monitoring, we retrieved time-constant velocity anomalies, whose shapes correlate well with crustal lithology, while time-changing (up to 20%) velocity anomalies are mapped in the central region. Here, the Vp-to-Vs changes at depths of 1-5 km and 8-12 km correlate well with groundwater recharge and geodetic displacement during the same time interval. This correlation provides evidence for the existence of pulsating, pore pressure changes induced by groundwater recharge processes in a deep volume (8-12 km of depth), fractured and saturated with a predominant gas phase (likely CO2). We suggest that tomographic measurements of the Vp-to-Vs spatiotemporal changes are a suitable proxy to track the pore pressure evolution at depth in highly sensitive regions of fault systems.
      96  127
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Fluid Accumulation Zone by Seismic Attributes and Amplitude Versus Offset Analysis at Solfatara Volcano, Campi Flegrei, Italy

    The imaging of volcanic systems is a challenging topic that attracts the scientific community’s attention. The characterization of structures and rock properties by means of seismic active methods is becoming fundamental for providing ultra-high-resolution images of the structures of interest. The Solfatara Volcano is a quiescent volcano in the Campi Flegrei resurgent nested caldera that is continuously under investigation and monitoring for its shallow activity, such as fumaroles. The purpose of this work is to characterize the fluid accumulation zone in the first 150 m depth in the middle of the crater, using several post-stack seismic attributes and Amplitude Versus Offset (AVO) analysis to characterize the contact between the CO2 and condensed water in the shallower accumulation zone. The two 400 m-long profiles to which we refer in this work have been acquired during the active Repeated InduCed Earthquakes and Noise experiment. The profiles were deployed along with the NNE-SSW and WNW-ESE directions across the whole surface of the crater including the main surface anomalies of the fumaroles, in the eastern area, and the mud-pool of Fangaia, located in the western area. The seismic pre-processing, pre-stack processing, and post-stack analysis previously applied on the NNE-SSW profile are here performed for the first time on the WNW-ESE profile, while partial-stack AVO analysis is performed for both profiles. The post-stack attributes including time gain, envelope, energy, and root mean square have been computed and extracted for determining the maximum and minimum values of amplitude zones on the migrated post-stack seismic profiles. Such anomalies are provided by complex and geometrical attributes embedding information on faults and chaotic zones. The AVO technique has also been used as a direct gas indicator to enhance fluid discrimination and identification. Finally, the analysis of the profile, seismic attributes, and near-surface structural interpretation related to the Solfatara Volcano has been incorporated into the proposed analysis. The multi-2D image depicts fluids trapped in the Solfatara Volcano at depths ranging from 10 to 50 m below the crater’s surface, as well as their migration paths up to 150 m deep: this evidenced contact between the fluids has been probably due to the solfataric alteration of the minerals, caused by the arising plume and the abovecondensed water which decreases the permeability of the rocks and forms an argillic phase working as cap-rock and trapping the gases. The application of the AVO analysis, coupled with the seismic attribute’s investigation, provides a very detailed multi-2D image of the shallower Solfatara Volcano, which outperforms in terms of accuracy the ones obtained with different tools in previous works, and that evidences the presence and the position of the liquid and the gases in the north-east area of the Solfatara Volcano.
      38  129
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Insights into Mechanical Properties of the 1980 Irpinia Fault System from the Analysis of a Seismic Sequence

    Seismic sequences are a powerful tool to locally infer geometrical and mechanical properties of faults and fault systems. In this study, we provided detailed location and characterization of events of the 3–7 July 2020 Irpinia sequence (southern Italy) that occurred at the northern tip of the main segment that ruptured during the 1980 Irpinia earthquake. Using an autocorrelation technique, we detected more than 340 events within the sequence, with local magnitude ranging between −0.5 and 3.0. We thus provided double difference locations, source parameter estimation, and focal mechanisms determination for the largest quality events. We found that the sequence ruptured an asperity with a size of about 800 m, along a fault structure having a strike compatible with the one of the main segments of the 1980 Irpinia earthquake, and a dip of 50–55° at depth of 10.5–12 km and 60–65° at shallower depths (7.5–9 km). Low stress drop release (average of 0.64 MPa) indicates a fluid-driven initiation mechanism of the sequence. We also evaluated the performance of the earthquake early warning systems running in real-time during the sequence, retrieving a minimum size for the blind zone in the area of about 15 km.
      43  95
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Performance of Earthquake Early Warning Systems during the 2016–2017 Mw 5–6.5 Central Italy Sequence

    Earthquake early warning systems (EEWSs) are nowadays contributing to seismic risk mitigation actions, both in terms of losses and societal resilience, by issuing an alert promptly after the earthquake origin and before the ground-shaking impacts the target to be protected. In this work, we analyze the performance of network-based and stand-alone (on-site) early warning systems during the 2016–2017 central Italy sequence, characterized by events with magnitude as large as 6.5. For the largest magnitude event, both systems predict well the ground shaking nearby the event source, with a rate of success in the 85%–90% range, within the potential earthquake damage zone. However, the lead time, that is, the time available for security actions, is significantly larger for the network-based system. For the regional system, it increases to more than 10 s at 40 km from the event epicenter. The stand-alone system performs better in the near-source region, still showing a positive albeit small lead time (<2 s). Far away from the source (>60 km), the performances slightly degrade, mostly owing to the large uncertainty in the attenuation relationships. This study opens up the possibility for making an operational EEWS in Italy, based on the available acceleration networks, provided that the delay due to data telemetry has to be reduced.
      771  13
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Integrated tomographic methods for seismic imaging and monitoring of volcanic caldera structures and geothermal areas

    In this paper we present innovative methodologies for seismic monitoring of volcanic structures in space and time (4D) which can possibly evolve toward an unrest stage. They are based on repeated phase and amplitude measurements done on active and/or passive seismic data including shots, vibrations, earthquakes and ambient noise in order to characterize the structure of the volcano and track its evolution through time. The characterization of the medium properties is performed through the reconstruction of an image of the elastic and anelastic properties of the propagation mediumcrossed by seismicwaves. This study focuses on the application of specific tomographic inversion methods to obtain high quality tomographic images. The resolution of the tomographic models is influenced by the number and spatial distribution of data. The expected resolution thus guides the setup of, for example, active seismic surveys. To recognize andmonitor changes in the properties of the propagation medium without performing an active survey we identify a fast proxy based on the time evolution of the Vp/Vs ratio. The advantages and limitations of the methods are discussed through synthetic tests, resolution analysis and case studies in volcanic areas such as the Campi Flegrei (southern Italy) and The Geysers geothermal area (California).
      103  7
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Crustal Deformation and Seismicity Modulated by Groundwater Recharge of Karst Aquifers

    Triggered seismicity in karst regions has been explained assuming the existence of a hydraulically connected fracture system and downward diffusion of surface pore pressures. Karst systems are, in fact, able to swiftly channel large amount of rainfall through networks of conduits increasing the hydraulic head loading upon the fluid‐saturated, poroelastic crust. Here we use Global Positioning System and hydrological and seismicity data to show that poroelastic strain in the shallow crust (0–3.5 km) controls seasonal and multiannual modulation of seismicity along the Irpinia Fault Zone (Southern Italy) without requiring a hydraulically connected fracture system from the surface to hypocentral depths. We suggest that groundwater recharge of karst aquifers along the Irpinia Fault Zone produces stress perturbations large enough to modulate strain accumulation and seismicity and temporarily modify the probability of nucleation of seismic events such as the 1980 Irpinia, MS 6.9, earthquake.
      283  170
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Damage detection in elastic properties of masonry bridges using coda wave interferometry

    Structures may be subjected to damage and deterioration over different timescales, and monitoring their health status may allow to perform maintenance actions before the functionality limit is reached. Masonry arch bridges, in particular, are sensitive to the bearings loss produced by scour of the streambed soil at the pier foundations. In this study, we measured the changes in the elastic properties of a 1:2 scaled model of a masonry arch bridge built in the laboratory to study the evolution of the damage mechanism related to the application of foundation movements. Specifically, the bridge is realized to model the effect of erosion of the ground underneath the central pier. We analysed the accelerometric records acquired along the structure generated by a sledgehammer hitting the bridge walls. We used the method of coda wave interferometry to detect the changes in the elastic properties of the medium. After selecting the specific frequency band exciting coda waves, we progressively measured the time lag between signals acquired in the intact and two damaged stages of the bridge for each source–receiver couple, and we fit the data to get the relative wave velocity changes. We found that the average relative velocity changes for the two damaged steps are Δv/v = −5.08 ± 0.08% and Δv/v = −8.2 ± 0.6%, consistently measured at all the analysed source–receiver couples. These values correspond to an average estimation of the velocity changes occurred within the structure, because the associated wavelengths are comparable with the bridge size and the damage is spread over a large portion of the structure.
      119  14
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Temporal evolution of a seismic sequence induced by a gas injection in the Eastern coast of Spain

    Induced seismicity associated with energy production is becoming an increasingly important issue worldwide for the hazard it poses to the exposed population and structures. We analyze one of the rare cases of induced seismicity associated with the underwater gas storage operations observed in the Castor platform, located in the Valencia gulf, east Spain, near a complex and important geological structure. In September 2013, some gas injection operations started at Castor, producing a series of seismic events around the reservoir area. The larger magnitude events (up to 4.2) took place some days after the end of the injection, with EMS intensities in coastal towns up to degree III. In this work, the seismic sequence is analyzed with the aim of detecting changes in statistical parameters describing the earthquake occurrence before and after the injection and identifying possible proxies to be used for monitoring the sequence evolution. Moreover, we explore the potential predictability of these statistical parameters which can be used to control the field operations in injection/storage fluid reservoirs. We firstly perform a retrospective approach and next a perspective analysis. We use different techniques for estimating the value of the expected maximum magnitude that can occur due to antropogenic activities in Castor.
      139  183