Michele, Maddalena
Preferred name
Michele, Maddalena
Email
maddalena.michele@ingv.it
ORCID
Scopus Author ID
56244802600
24 results
Filters
Settings
The search returned 24 results
Now showing 1 - 10 of 24
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The new seismic catalog of the Gargano area (Southern Italy) after a decade of seismic monitoring by OTRIONS network
(Göttingen: Copernicus Publications, 2026-05-13) ;Ferreri, Andrea Pio; ;Giannuzzi, Rossella; The Gargano Promontory (hereafter GP) has attracted the attention of seismologists in recent years for its peculiarities regarding the high rate of low-magnitude seismicity and focal depths in the lower crust. These peculiarities have been highlighted thanks to the new data provided by the OTRIONS seismic network (hereafter OT), installed in 2013 in the GP area, consisting of 15 short-period seismometers, thanks to a fruitful collaboration between UniBa (University of Bari Aldo Moro) and INGV (Istituto Nazionale di Geofisica e Vulcanologia). The first available seismic catalog referred to the first 7 years of the network operation (2013–2018) and suffered from some technological problems of the acquisition system. Thanks to improvements in the data transmission system, these problems were overcome in 2019 and now the OT network data are available in real time. In order to include the most recent seismicity and to cover the temporal gaps existing in the previous catalog, we thoroughly reviewed the 24 h seismic recordings, collected over the decade after the installation, by employing an automatic detect and picking software (CASP, Complete Automatic Seismic Processor). More than 7100 seismic events were initially identified. Through careful manual review, approximately 60 % were confirmed as local earthquakes, and the others were recognized as quarry blasts or false/poorly-located events. Manual review significantly improved the quality of P- and S-phase picking, and consequently led to more accurate earthquake locations, using both linearized and nonlinear algorithms. The manual review resulted in two catalogs, both released on Mendeley Data (Ferreri et al., 2026) (https://doi.org/10.17632/nhfvx7ysxw.6). This study highlights the value of automatic analysis for compiling a seismic catalog, suggesting that the manual review is still necessary. The quality of the catalogs was assessed in detail using statistical parameters and a new formula for the location quality. The completeness magnitude of the new catalogs is as low as 0.82. The noise affecting the network was also evaluated. This study confirms the importance of the OT local network for seismic hazard analysis and provides a useful dataset for seismotectonic and geophysical studies in a long under-monitored region.4 7 - Some of the metrics are blocked by yourconsent settings
Item type:Product, Access status: Open Access , Bollettino Sismico Italiano Gennaio – Aprile 2024
Report di accompagnamento alla pubblicazione del catalogo di sismicità del Bollettino Sismico Italiano (quadrimestre gennaio-aprile 2024)32 46 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Analysis and preliminary results of the Mw 4.9, Marradi seismic sequence (September 18th, 2023), in the northern Apennines, carried out by the BSI working group.
On September 18, 2023, an earthquake with a magnitude of Ml=4.8 (Mw=4.9) occurred a few kilometers SW of Marradi (FI) at a depth of about 8 kilometers. The computed TDMT solution of the mainshock suggests a normal fault oriented NW-SE (Scognamiglio et al., 2006). The earthquake, preceded by a foreshock with a magnitude of Ml=3.3 (Mw=3.4), triggered a seismic sequence characterized, in the first two months, by approximately 700 aftershocks localized by the staff on duty in the Seismic Monitoring Room of the INGV in Rome, including 6 events with a magnitude of Ml≥3.0 occurred in the first two days. The sequence occurred in a high seismic hazard region. The two closest historical earthquakes occurred in the Mugello area about 30 km SW of Marradi (and about 25 km north of Florence): one, whose magnitude (Mw) is estimated to be about 6.0, occurred on June 13, 1542 while the other with estimated magnitude (Mw) of about 6.4 occurred on June 29, 1919. The second one is among the strongest (most significant) Italian earthquakes of the 20th century, and also one of the strongest known to date with its epicentre in the northern Apennines. The affected area was that of Mugello, with extensive damage both in the province of Florence and on the Romagna side of the Apennines. The analysts of the BSI (Italian Seismic Bulletin) reviewed the initial three days of the sequence, paying special attention to the hours directly following the mainshock. The BSI work mainly consists in revising the picking of P and S phases and assigning them appropriate weights, retrieving previously unused phases, and evaluating the maximum amplitudes necessary for calculating the value of Ml. The latter is a critical aspect of the initial phases of a seismic sequence; in fact, the occurrence of events is very close in time, making it challenging to estimate the maximum amplitudes and, consequently, the magnitude automatically. Through this analysis, they have identified an earthquake with a magnitude of Ml=3.4, occurring approximately one minute after the mainshock and overlooked during the surveillance service. Furthermore, a comprehensive effort to recover smaller seismic events not initially analyzed in the Seismic Monitoring Room resulted in the localization of 498 earthquakes, nearly a 30% increase within the first three days. In Figure 1(a-d), hypocentral parameters and time readings of the 352 earthquakes detected in the Seismic Monitoring Room have been compared with those of the same events revised by the BSI. It is evident as both the horizontal and vertical errors, as well the seismic gap associated with the location decrease for the dataset analyzed from the BSI, while the number of P and S phases increases for the same dataset. Subsequently, the events revised from BSI were initially relocated by applying the NonLinLoc code (Lomax et al., 2000) using a 1D regional velocity model from Pastori et al. (2019). Following this, a double-difference technique (Waldhauser and Schaff, 2008) was applied to improve the geometries of the activated structures (see Figure 2). Concomitantly, an analysis using the template matching technique was applied, for the period from September first to October 10th, to identify events overlooked by the Earthworm system in the Seismic Monitoring Room. The results are shown in Figure 3. It was found that the number of detections increased by approximately 60%. Furthermore, the figures 3c and 3d put in evidence as the larger number of new detected earthquakes is characterized by lower magnitude. This result highlights the value of integrating this type of analysis to complement the efforts of the Italian Seismic Bulletin (BSI).132 222 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , What we can say (or not) about the seismic sequence of the November 9th 2022, Mw 5.5, earthquake in the Marche offshore: an analysis of the Italian Seismic Bulletin on phase interpretation, velocity models and uncertainties of earthquake locations
(2023-02-09); ; ; ; Introduction In November 2022 a seismic sequence occurred in the Marche offshore, about 29 km from the coast and the city of Fano. The sequence started on November 9 (06:07:25 UTC) with a ML=5.7 earthquake (Mw=5.5 from TDMD computation, Scognamiglio et al., 2006), immediately followed by a ML=5.2 earthquake (06:08:29 UTC) located about 8 km to the south. The two mainshocks activated a seismic sequence with about 400 aftershocks lasting the first week, 13 of them with ML>= 3.5 (Fig. 1). Few hours after the occurrence of the mainshock, the BSI (“Bollettino Sismico Italiano”) working group started to manually analyze P and S phase arrival times and seismogram amplitudes of earthquakes with magnitude ML>= 3.5 recorded by the the Italian National Seismic Network (Rete Sismica Nazionale, hereafter RSN) in order to better constrain hypocenter locations previously provided by the seismic surveillance room of the INGV in Rome for rapid communication to the Italian Civil Protection (Dipartimento Protezione Civile, DPC). Later, the BSI working group analyzed the seismicity of the sequence of the first weeks of seismic activity by revising hypocentral parameters of more than 500 events. The 2022 Marche offshore sequence took place along the Adriatic outer front of the northern Apennines in central Italy. Offshore seismic reflection profiles image a shallow thrust-and-fold system striking WNW–ESE to NNW–SSE. Along the coastal Adriatic area, active blind thrusts deform Plio-Quaternary siliciclastic turbidites that are few hundreds of meters to more than 2 km thick in correspondence of ramp anticlines and synclines, respectively. In a recent work, through the analysis of high-quality background seismicity data, De Nardis et al. (2022) identified two lithospheric-scale active thrusts deepening westward under the Adriatic outer front from upper- to lower-crustal depths. These new data support previous thick-skinned interpretations of seismic commercial profiles and CROP03 deep reflection data (Lavecchia et al., 2003). Focal mechanisms of weak to moderate (ML < 4.8) local earthquakes occurred between 2009-2017 at upper- to deep-crustal depths show prevailing reverse and reverse/oblique solutions (De Nardis et al., 2022) and subordinate strike-slip faulting (Mazzoli et al., 2014). The analysis of the 2022 Marche offshore sequence opens again the discussion on the uncertainties related to the hypocenter locations of earthquakes that occur in the Adriatic offshore domain (e.g., Di Stefano et al., 2022) and the limits of our present capability to provide an accurate seismotectonic interpretation of the instrumental seismicity in this region. Actually, the 2022 sequence area is only covered on land by RSN, with the closest seismic station located at about 28 km from the epicentral location of the mainshock. The particular geometry of the network along the Italian coast makes it difficult to correctly constrain hypocenter locations compared with other regions of Italy. Taking into account this configuration, although the INGV is able to obtain coherent earthquake information for Civil Protection purposes into the limits of the communication threshold, we note that data provided by the seismic surveillance room in terms of both seismic phase readings of arrival times for hypocenter location and waveform amplitudes for magnitude computation need to a more accurate analysis if the main goal is the correct reconstruction of the active structures involved in the sequence. This analysis should include a) a careful revision of the arrival time pickings to reduce the errors due to seismic phase misinterpretations, b) an accurate study to constrain earthquake locations with appropriate velocity models, and c) the hypocenter solution assessment through adequate tests that define which information can be inferred from earthquake location results. Data analysis and phases interpretation Through the interpretation of the seismic records, the BSI analysts have identified refracted first arrivals of P and S phases at epicentral distances of about 60 km, smaller than those expected for Pn/Sn refracted phases at the Moho discontinuity (e.g., Di Stefano and Ciaccio, 2014) whose arrivals should be observed at distances of about 90-100 km in this area. Since possible systematic misinterpretation of P and S arrivals can strongly affect the correct hypocenter locations, we have carefully revised the phase pickings provided by the INGV surveillance room by discriminating direct from refracted phases at stations located at distances greater than 60 km. This is mainly important for interpretation of weak S refracted phases that are often hidden into the arrivals after the P phase. We have taken into account these characteristics in the earthquake location process by only using clear direct/refracted S phases in our inversion procedure. The comparison of the ML>= 3.5 hypocenter locations performed by the BSI and the INGV surveillance room (Figs. 1 and 2) shows how an accurate analysis of the pickings is necessary to obtain robust earthquake locations for seismotectonic interpretation: even using the same hypocenter location code and velocity model, we observe that the mislocation of the hypocenters in this area can range from few to about 10 kilometers (Fig. 1) while the formal errors are strongly reduced after the BSI picking revision (Fig. 2) The velocity model issue Events location in the Adriatic Sea suffers from the lack of a specific velocity model for the seismic sequence area. The use of inadequate velocity parameters during the location process can introduce systematic errors, which may result in incorrect seismotectonic interpretations. We therefore built and tested different velocity models from both available geophysical data and our inversion of the velocity structure using the arrival time readings revised by the BSI working group. In order to define deterministic 1D models suitable for earthquake location (Vp and Vp/Vs), we integrated sonic logs from local deep wells (ViDEPI Project, 2005) with literature data that include: seismic commercial profiles, deep seismic refraction surveys, the CROP03 crustal profile, Receiver Function and regional seismic tomography models, Vp/Vs reference values for mid- and lower-crustal crystalline rocks (Coward et al., 1999; Ponziani et al., 1995; Lavecchia et al., 2003; Spada et al., 2013; Di Stefano et al., 2009, Christiansen and Mooney, 1993). In order to obtain the velocity structure from our revised dataset, we first determined the Vp/Vs ratio by using the arrival time pickings of selected P and S phases. The mean velocity ratio Vp/Vs was computed through the cumulative Wadati diagram. Then, by collecting all the a priori available information regarding the structure of Adriatic Sea (velocities, layer thicknesses and Moho depth), we applied the VELEST software (Kissling, 1995) to compute a new 1D velocity model for earthquake location. Conclusions In this work we present our first analyses of the sequence and the accurate study of the velocity models that we obtained from both a revision of available data and the inversion of arrival time pickings analyzed by the BSI analists. Moreover, we will discuss our preliminary earthquake locations with a particular attention to resolution analysis and hypocenter location assessment.187 194 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The Unlocking Process Leading to the 2016 Central Italy Seismic Sequence
(2023-01-24); ; ; ; Approximately 23,000 well-located earthquakes from 2009 to 2016 are used as templates to recover seismic activity preceding the 2016 Central Italy seismic sequence. The resulting spatiotemporal pattern is analyzed by additional ∼91,000 newly detected events. In the 8 years before the sequence onset, seismicity (ML ≤ 3.7) develops at the hangingwall of the 2016 normal faults and along a sub-horizontal shear zone, bounding the active extensional system at depth. This activity, mainly organized in foreshock-mainshock and swarm-like clusters, migrates toward the nucleation area of the first Mw 6.0 mainshock of the sequence (24th of August in Amatrice). We propose an unlocking process based on variable temporal clustering of the seismicity, including repeaters, identifying fault portions with different degrees of coupling. Such a progressive localization of the seismic activity at the fault edges induces a weakening of the locked patch of the Amatrice mainshock.44 97 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , An updated view of the Italian seismicity from probabilistic location in 3D velocity models: The 1981–2018 Italian catalog of absolute earthquake locations (CLASS)
We have built a complete catalog of three-dimensional (3D) hypocenter locations of earthquakes recorded in Italy from 1981 to 2018. Our catalog includes more than 420,000 events relocated by inverting a newly integrated dataset of ~5.0 million P and ~ 3.5 million S wave arrival times recorded by the Italian National Seismic Network and other permanent seismological networks operating in Italy. Available magnitudes are associated with earthquake locations from the most recent datasets and bulletins of Italian seismicity. Earthquakes are located in an updated 3D tomographic model of Italy obtained by including the Moho discontinuity and the seismic velocities of the Ionian subduction zone. We used a probabilistic, non-linear earthquake location code which provides complete information of the hypocenter solution uncertainties. Quality estimators of earthquake locations are analyzed a posteriori with an original criterion for a quantitative classification of the results, allowing users to select seismic events belonging to consistent quality classes and giving a more controlled image of the Italian instrumental seismicity for tectonic and geodynamical studies. The resulting catalog gives a new, coherent view of the spatial and temporal distribution of Italian seismicity. By selecting well constrained located events we construct the new Italian Crustal Seismogenic Layer (CSL) with a good spatial resolution, allowing us to show a comparison between seismogenic thicknesses and Moho geometry distribution. We finally present some examples of seismicity distribution in selected areas of Italy at regional and local scale relating the relocated events of our catalog with available multidisciplinary information from geology, geochemistry, geodynamical models, and historical seismicity.15 53 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Fault Rheology Control on Rupture Propagation and Aftershocks Distribution during the 2016–2017 Central Italy Earthquakes
The stress released by large coseismic ruptures and related aftershock sequences is a strongly heterogeneous process. We show highly resolved images of the normal fault system ruptured during the 2016-2017 Central Italy earthquake sequence, as obtained by high resolution local earthquake tomography allowing relocation of a massive set of aftershocks. We get evidence that lateral changes of elastic properties on the fault planes account for the complexity in the rupture processes during the two M>6 earthquakes. We observe an emergent phase in the first part of the Mw6.5 rupture and the coseismic slip becomes large when the rupture breaks through high Poisson ratio portions of the fault. Mainshocks break fault portions that, although limited and segmented by inherited structural complexity, were dynamically interfering during the faulting episodes. The close repetition of slip on the same relatively high Poisson ratio patch suggests a dynamic weakening of the fault and/or an incomplete stress release during the first mainshock.60 263 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A comprehensive suite of earthquake catalogues for the 2016-2017 Central Italy seismic sequence
(2022-11-18); ; ; ; The protracted nature of the 2016-2017 central Italy seismic sequence, with multiple damaging earthquakes spaced over months, presented serious challenges for the duty seismologists and emergency managers as they assimilated the growing sequence to advise the local population. Uncertainty concerning where and when it was safe to occupy vulnerable structures highlighted the need for timely delivery of scientifically based understanding of the evolving hazard and risk. Seismic hazard assessment during complex sequences depends critically on up-to-date earthquake catalogues-i.e., data on locations, magnitudes, and activity of earthquakes-to characterize the ongoing seismicity and fuel earthquake forecasting models. Here we document six earthquake catalogues of this sequence that were developed using a variety of methods. The catalogues possess different levels of resolution and completeness resulting from progressive enhancements in the data availability, detection sensitivity, and hypocentral location accuracy. The catalogues range from real-time to advanced machine-learning procedures and highlight both the promises as well as the challenges of implementing advanced workflows in an operational environment.372 128 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Seismicity of the Gargano promontory (Southern Italy) after 7 years of local seismic network operation: Data release of waveforms from 2013 to 2018
The University of Bari (Italy), in cooperation with the National Institute of Geophysics and Volcanology (INGV) (Italy), has installed the OTRIONS micro-earthquake network to better understand the active tectonics of the Gargano promontory (Southern Italy). The OTRIONS network operates since 2013 and consists of 12 short period, 3 components, seismic stations located in the Apulian territory (Southern Italy). This data article releases the waveform database collected from 2013 to 2018 and describes the characteristics of the local network in the current configuration. At the end of 2018, we implemented a cloud infrastructure to make more robust the acquisition and storage system of the network through a collaboration with the RECAS-Bari computing centre of the University of Bari (Italy) and of the National Institute of Nuclear Physics (Italy). Thanks to this implementation, waveforms recorded after the beginning of 2019 and the station metadata are accessible through the European Integrated Data Archive (EIDA, https://www.orfeus-eu.org/data/eida/nodes/INGV/).273 181 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , An automatically generated high-resolution earthquake catalogue for the 2016–2017 Central Italy seismic sequence, including P and S phase arrival times
The 2016–17 central Italy earthquake sequence began with the first mainshock near the town of Amatrice on August 24 (MW 6.0), and was followed by two subsequent large events near Visso on October 26 (MW 5.9) and Norcia on October 30 (MW 6.5), plus a cluster of 4 events with MW > 5.0 within few hours on January 18, 2017. The affected area had been monitored before the sequence started by the permanent Italian National Seismic Network (RSNC), and was enhanced during the sequence by temporary stations deployed by the National Institute of Geophysics and Volcanology and the British Geological Survey. By the middle of September, there was a dense network of 155 stations, with a mean separation in the epicentral area of 6–10 km, comparable to the most likely earthquake depth range in the region. This network configuration was kept stable for an entire year, producing 2.5 TB of continuous waveform recordings. Here we describe how this data was used to develop a large and comprehensive earthquake catalogue using the Complete Automatic Seismic Processor (CASP) procedure. This procedure detected more than 450,000 events in the year following the first mainshock, and determined their phase arrival times through an advanced picker engine (RSNI-Picker2), producing a set of about 7 million P- and 10 million S-wave arrival times. These were then used to locate the events using a non-linear location (NLL) algorithm, a 1D velocity model calibrated for the area, and station corrections and then to compute their local magnitudes (ML). The procedure was validated by comparison of the derived data for phase picks and earthquake parameters with a handpicked reference catalogue (hereinafter referred to as ‘RefCat’). The automated procedure takes less than 12 hours on an Intel Core-i7 workstation to analyse the primary waveform data and to detect and locate 3000 events on the most seismically active day of the sequence. This proves the concept that the CASP algorithm can provide effectively real-time data for input into daily operational earthquake forecasts, The results show that there have been significant improvements compared to RefCat obtained in the same period using manual phase picks. The number of detected and located events is higher (from 84,401 to 450,000), the magnitude of completeness is lower (from ML 1.4 to 0.6), and also the number of phase picks is greater with an average number of 72 picked arrival for a ML = 1.4 compared with 30 phases for RefCat using manual phase picking. These propagate into formal uncertainties of ± 0.9km in epicentral location and ± 1.5km in depth for the enhanced catalogue for the vast majority of the events. Together, these provide a significant improvement in the resolution of fine structures such as local planar structures and clusters, in particular the identification of shallow events occurring in parts of the crust previously thought to be inactive. The lower completeness magnitude provides a rich data set for development and testing of analysis techniques of seismic sequences evolution, including real-time, operational monitoring of b-value, time-dependent hazard evaluation and aftershock forecasting.254 180
