Skip to main content
The search returned 96 results
Now showing 1 - 10 of 96
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Characterizing the subsurface structure and active faults of the Fucino Basin (Central Apennines) through integrated high-resolution seismic reflection and nodal ambient noise surveys

    (Lausann : Frontiers Media S.A., 2013-, 2026-03-24) ; ; ; ;
    The Fucino Basin, the largest tectonic basin within the Central Apennines orogen, is bounded by normal faults that have controlled the deposition of over 1 km of Pliocene-Quaternary continental deposits above a Messinian substratum. Conflicting interpretations from legacy seismic profiles have hindered a full understanding of the basin’s stratigraphy, age, evolution, and fault systems, creating uncertainties for tectonic reconstructions, seismic response analysis and hazard assessment. To resolve these uncertainties, we acquired new high-resolution datasets through three complementary active–passive seismic surveys. These include seismic reflection profiles covering ∼10 km, a nodal ambient noise campaign deploying 258 short-period nodes over 16 km2, preceded by two pilot array tests, and finally a basin-wide ambient noise survey comprising 1-hour recordings at 42 sites. Our analysis focused on the San Benedetto and Trasacco Faults—responsible for the 1915, M7.1, Marsica earthquake—and the main depocenter (the Bacinetto) associated with the San Benedetto Fault. This paper presents experimental setup, recorded data, and initial findings that provide new insights into basin stratigraphy, fault geometry, and spatial distribution of the fundamental resonance frequency (f0). The seismic reflection data show excellent imaging quality, resolution, and penetration exceeding 1 km. The Bacinetto hosts up to 850–900 m of continuous lacustrine succession and lower fluvio-lacustrine deposits that record sustained syn-sedimentary slip along the San Benedetto Fault from the Late Pliocene to Recent times. No evidence is found for significant synthetic or antithetic faulting beneath the depocenter, contradicting earlier structural models. The intra-basin Trasacco Fault forms a clear basement step and localized sediment thickening that tapers northwestward f0 varies from 1 to 2 Hz near the basin margins to ∼0.2 Hz in the Bacinetto, reflecting progressive sediment thickening, whereas it varies abruptly across fault zones. f0 estimates from nodal and station data show good consistency.
      19  17
  • Some of the metrics are blocked by your 
    Item type:Product, Access status: Open Access ,

    Bollettino Sismico Italiano Settembre – Dicembre 2023

    Gli analisti del BSI hanno revisionato la sismicità registrata in Italia dal 1 settembre al 31 dicembre 2023 analizzando tutti i terremoti di magnitudo M≥1.5, mentre per i terremoti di magnitudo inferiore i parametri sono quelli calcolati in tempo reale, nella SALA DI SORVEGLIANZA SISMICA DI ROMA. I terremoti più forti (M≥3.5) e pochi altri di particolare interesse [vedi Marchetti et al., 2016, DOI: 10.4401/ag-6116], sono stati revisionati dagli analisti del BSI, mediamente nelle 24 ore successive al loro accadimento.
      34  37
  • Some of the metrics are blocked by your 
    Item type:Product, Access status: Open Access ,

    Bollettino Sismico Italiano Maggio – Agosto 2023

    La revisione della sismicità registrata in Italia dal 1 maggio al 31 agosto 2023 da parte degli analisti del BSI ha riguardato tutti i terremoti di magnitudo M≥1.5. Per gli eventi di magnitudo inferiore, invece, sono stati considerati i parametri calcolati in tempo reale, nella SALA DI SORVEGLIANZA SISMICA DI ROMA. I terremoti di magnitudo M≥3.5 insieme a pochi altri ritenuti di particolare interesse [vedi Marchetti et al., 2016, DOI: 10.4401/ag-6116], sono stati analizzati più approfonditamente successivamente alle 24 ore dal loro verificarsi.
      33  45
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Combining 3‐D Deep Electrical Resistivity Tomography With Magnetic Surveys to Investigate Complex Tectonic Basins: A Case Study From the Central Apennines Seismic Belt (Italy)

    (Washington, D.C. : American Geophysical Union, European Geophysical Society, 2025-08-28) ; ; ; ;
    We use an innovative geophysical approach to reconstruct the deep structure of Campo Felice, an important extensional basin in the centrai Apennines (ltaly) where active crustal extension is accommodated by nonna! fauJts capable of generating earthquakes of magnitude Mw 6+. To this end, we combine 3-D Deep Electrical Resistivity Tomography with Unmanned Aerial Vehicle aeromagnetic survey. Before this study, the knowledge of the subsurface was limited to a small sector of the basin investigated by two seismic reflection profiles and shallow scientific drillings. Our resistivity model unravels for the first time a complex subsurface structure, due to two SW-dipping and left-stepping norma! faults (Mt Cefalone­Serralunga and Mt Orsello), with antithetic and relay faults. Altogether, they favored the generation of two distinct sub-basins ~400--450 and ~250-300 m-deep, filled with alluvial, lacustrine and glacial deposits. Aeromagnetic data further constrain the extent and thickness of fine-grained infili sediments, while previous drillings and seismic reflection profiles are useful to constrain geologica! interpretation. We provide a model of basin evolution covering approximately the last million years, improving the knowledge of the Quatemary kinematics and structure of this sector of the chain. Furthermore, th.is cost-effective approach can be safely exported to similar tectonic contexts elsewhere.
      9  37
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Radially Anisotropic 3D Velocity Model of the Central Apennines Lithosphere: The CI 23 Model

    (Washington, DC: American Geophysical Union, 2025-02-03) ; ; ; ;
    We present the first application of Full-Waveform Inversion (FWI) for a radially anisotropic 3D velocity model of the lithosphere beneath central Italy. The retrieved model CI 23 constrains P-wave (V PV , V PH) and S-wave velocities (V SV , V SH) in the period range 8-50 s. CI 23 model correlates well with regional lithological formations and highlights a negative radial anisotropy anomaly (V SH < V SV) localized beneath the epicentral region of the 2016-2017 Amatrice-Visso-Norcia (AVN) seismic sequence. An opposite trend (positive radial anisotropy anomaly, i.e. V SH > V SV) is observed in the area affected by the 2009 L'Aquila (AQ) seismic sequence. We interpret the velocity anomalies in terms of local tectonic structures, particularly the Olevano-Antrodoco-Sibillini (OAS) thrust-Gran Sasso Thrust (GST) systems, while also considering possible evidence of overpressured fluids and fluid migration. Additionally, the observed anomalies may reflect transient velocity variations induced by the ANV and AQ seismic sequences. Plain Language Summary Full-Waveform Inversion (FWI) retrieves accurate Earth models using complete waveform data. Here we implement this imaging technique to retrieve the first radially anisotropic 3D velocity model of the lithosphere beneath central Italy, one of the region with highest seismic hazard in Italy. The model highlights spatial variations of velocities that likely reflect local tectonics and fluid processes. Since the inverted data set mainly encompasses the two major sequences affecting the region (the 2016-2017 Amatrice-Visso-Norcia and the 2009 L'Aquila seismic sequences), we cannot exclude that the observed anomalies reflect transient variations of elastic properties induced by large seismic events along with their aftershocks.
      13  56
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    3-D Mantle Flow and Structure of the Mediterranean From Combined P-Wave and Splitting Intensity Anisotropic Tomography

    (John Wiley & Sons, 2025) ; ; ; ;
    Erman, C
    We present a novel three-dimensional anisotropic seismic tomography model of the Mediterranean region, achieved through the simultaneous inversion of P-wave travel-times and SKS splitting intensity. This dual approach has allowed us to obtain a comprehensive tomographic model that not only delineates the primary structural features of the area but also sheds light on its tectonic evolution. Our findings reveal that the isotropic component of the model is dominated by fast anomalies associated with retreating, stagnant, and detached slab segments including the Alboran, Apennine, and Alpine slabs in the central and western Mediterranean, and the Dinaric, Carpathian, and Hellenic slabs in the east. Slower mantle structures are associated with slab windows and back-arc basin formation, such as those observed in the Tyrrhenian, Apennine and Hellenic regions. The recovered anisotropic patterns provide crucial insights into the tectonic history of the Mediterranean, highlighting periods of collision and tectonic relaxation. Notably, we observe a range of plunge angles, with both near-horizontal and steeply dipping anisotropic fabrics present in different regions, reflecting the influence of horizontal and vertical asthenospheric flow. By interpreting the high-velocity zones as subducting lithosphere, we construct a detailed 3-D model of the main slabs and analyzed the surrounding Pwave anisotropic patterns. This work represents the first comprehensive anisotropic tomography study of the entire Mediterranean region. Plain Language Summary This study presents a new 3-D model of the deep structure of the Mediterranean region, offering a clearer understanding of the tectonic evolution of the area. Unlike previous research, which assumed the Earth's mantle behaves the same in all directions, our study takes into account its anisotropic nature, where the mantle's properties vary depending on the direction seismic waves travel through it. By combining different types of seismic data, the study reveals intricate interactions between tectonic plates, including the subduction of some plates and the extension or fragmentation of others. The findings highlight significant tectonic features, such as the Alboran, Apennine, and Alpine slabs in the central and western Mediterranean, and the Dinaric, Carpathian, and Hellenic slabs in the east. The study also reveals important mantle dynamics, including horizontal and vertical flow patterns, slab detachment, and volcanic processes. This research provides a deeper insight into the Mediterranean's geological history and the forces that continue to shape the region.
      7  61
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Splitting intensity tomography to image depth-dependent seismic anisotropy patterns beneath the Italian Peninsula and surrounding regions

    The region between central Europe and the centre of the Mediterranean is characterised by complex tectonics and kinematics. Here, the interaction between thickened crust, subducting lithosphere and surrounding asthenosphere produces strong and pervasive anisotropy in the upper mantle. Shear wave splitting measurements, the most adopted method to image seismic anisotropy so far, when interpreted in a ray-based framework result in little or no depth resolution, hampering a correct image of the anisotropy distribution with depth. In this study, we aim to better constrain the depth-dependent seismic anisotropy beneath Italy and surrounding regions, by isolating for the first time the source region of anisotropy at different depths. To do that, we perform an anisotropy tomography, adopting the splitting intensity inversion method. It is entirely based on the finitefrequency effect in the splitting of SKS waves. We first computed the splitting intensity using SKS waves recorded at all available permanent and temporary stations over the region, obtaining a huge dataset of measurements used as an input for the tomographic inversion. The large-scale 3D model of seismic anisotropy obtained with the inversion shows a clear change of anisotropy properties in terms of fast polarisation direction and intensity for different depths, thus improving the characterization of the main sources of anisotropy in the mantle as a function of depth. Shallower layers (70-100 km depth) are characterised by a complex and variable oriented pattern of anisotropy fast direction and intensity, which becomes progressively more organised with depth (100-300 km). This pattern suggests a strong control exerted by the geometry and motion of the different slab segments and the large-scale asthenospheric flow generated by subduction and roll-back processes. The strength of anisotropy increases with depth, with high values affecting the bulge of the Alps and Apennines chains and the southern Tyrrhenian subduction system. On the contrary, weaker anisotropy characterises the transition zone from the Apennines to Alpine domains beneath the Po plain, and both the Adriatic and European domains.
      13  105
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Bollettino Sismico Italiano gennaio – aprile 2023

    La revisione da parte degli analisti del BSI della sismicità registrata in Italia dal 1 gennaio al 30 aprile 2023 ha riguardato tutti i terremoti di magnitudo M≥1.5, mentre i parametri dei terremoti di magnitudo inferiore a tale soglia sono quelli calcolati in tempo reale, nella SALA DI SORVEGLIANZA SISMICA DI ROMA. I terremoti più forti (M≥3.5) e pochi altri di particolare interesse [vedi Marchetti et al., 2016, DOI: 10.4401/ag- 6116], sono stati revisionati dagli analisti del BSI, mediamente nelle 24 ore successive al loro accadimento.
      87  157
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Bollettino Sismico Italiano settembre – dicembre 2022

    La revisione da parte degli analisti del BSI della sismicità registrata in Italia dal 1 settembre al 31 dicembre 2022 ha riguardato tutti i terremoti di magnitudo M≥1.5, mentre i parametri dei terremoti di magnitudo inferiore a tale soglia sono quelli calcolati in tempo reale, nella SALA DI SORVEGLIANZA SISMICA DI ROMA. I terremoti più forti (M≥3.5) e pochi altri di particolare interesse [vedi Marchetti et al., 2016, DOI: 10.4401/ag-6116], sono stati revisionati dagli analisti del BSI, mediamente nelle 24 ore successive al loro accadimento.
      60  128
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A strainmeter array as the fulcrum of novel observatory sites along the Alto Tiberina Near Fault Observatory

    (2024-06-24) ;
    Bennett, Richard
    ;
    Mencin, David
    ;
    Johnson, Wade
    ;
    Fault slip is a complex natural phenomenon involving multiple spatiotemporal scales from seconds to days to weeks. To understand the physical and chemical processes responsible for the full fault slip spectrum, a multidisciplinary approach is highly recommended. The Near Fault Observatories (NFOs) aim at providing highprecision and spatiotemporally dense multidisciplinary near-fault data, enabling the generation of new original observations and innovative scientific products. The Alto Tiberina Near Fault Observatory is a permanent monitoring infrastructure established around the Alto Tiberina fault (ATF), a 60 km long low-angle normal fault (mean dip 20°), located along a sector of the Northern Apennines (central Italy) undergoing an extension at a rate of about 3 mm yr −1. The presence of repeating earthquakes on the ATF and a steep gradient in crustal velocities measured across the ATF by GNSS stations suggest large and deep (5-12 km) portions of the ATF undergoing aseismic creep. Both laboratory and theoretical studies indicate that any given patch of a fault can creep, nucleate slow earthquakes, and host large earthquakes, as also documented in nature for certain ruptures (e.g., Iquique in 2014, Tōhoku in 2011, and Parkfield in 2004). Nonetheless, how a fault patch switches from one mode of slip to another, as well as the interaction between creep, slow slip, and regular earthquakes, is still poorly documented by near-field observation. With the strainmeter array along the Alto Tiberina fault system (STAR) project, we build a series of six geophysical observatory sites consisting of 80-160 m deep vertical boreholes instrumented with strainmeters and seismometers as well as meteorological and GNSS antennas and additional seismometers at the surface. By covering the portions of the ATF that exhibits repeated earthquakes at shallow depth (above 4 km) with these new observatory sites, we aim to collect unique open-access data to answer fundamental questions about the relationship between creep, slow slip, dynamic earthquake rupture, and tectonic faulting.
      13  79