Modeling the Topside Ionosphere Effective Scale Height through In Situ Electron Density Observations by Low-Earth-Orbit Satellites
Author(s)
Language
English
Obiettivo Specifico
2A. Fisica dell'alta atmosfera
Status
Published
JCR Journal
JCR Journal
Peer review journal
Yes
Journal
Issue/vol(year)
/9 (2023)
ISSN
2218-1997
Publisher
MDPI
Pages (printed)
280
Date Issued
June 9, 2023
Abstract
In this work, we aim to characterize the effective scale height at the ionosphere F2-layer
peak (H0) by using in situ electron density (Ne) observations by Langmuir Probes (LPs) onboard
the China Seismo-Electromagnetic Satellite (CSES—01). CSES—01 is a sun-synchronous satellite
orbiting at an altitude of ~500 km, with descending and ascending nodes at ~14:00 local time (LT) and
~02:00 LT, respectively. Calibrated CSES—01 LPs Ne observations for the years 2019–2021 provide
information in the topside ionosphere, whereas the International Reference Ionosphere model (IRI)
provides Ne values at the F2-layer peak altitude for the same time and geographical coordinates as
CSES—01. CSES—01 and IRI Ne datasets are used as anchor points to infer H0 by assuming a linear
scale height in the topside representation given by the NeQuick model. COSMIC/FORMOSAT—3
(COSMIC—1) radio occultation (RO) data are used to constrain the vertical gradient of the effective
scale height in the topside ionosphere in the linear approximation. With the CSES—01 dataset, we
studied the global behavior of H0 for daytime (~14:00 LT) and nighttime (~02:00 LT) conditions,
different seasons, and low solar activity. Results from CSES—01 observations are compared with those
obtained through Swarm B satellite Ne-calibrated measurements and validated against those from
COSMIC—1 RO for similar diurnal, seasonal, and solar activity conditions. H0 values modeled by
using CSES—01 and Swarm B-calibrated observations during daytime both agree with corresponding
values obtained directly from COSMIC—1 RO profiles. Differently, H0 modeling for nighttime
conditions deserves further investigation because values obtained from both CSES—01 and Swarm
B-calibrated observations show remarkable and spatially localized differences compared to those
obtained through COSMIC—1. Most of the H0 mismodeling for nighttime conditions can probably
to be attributed to a sub-optimal spatial representation of the F2-layer peak density made by the
underlying IRI model. For comparison, H0 values obtained with non-calibrated CSES—01 and Swarm
B Ne observations are also calculated and discussed. The methodology developed in this study for
the topside effective scale height modeling turns out to be applicable not only to CSES—01 satellite
data but to any in situ Ne observation by low-Earth-orbit satellites orbiting in the topside ionosphere.
peak (H0) by using in situ electron density (Ne) observations by Langmuir Probes (LPs) onboard
the China Seismo-Electromagnetic Satellite (CSES—01). CSES—01 is a sun-synchronous satellite
orbiting at an altitude of ~500 km, with descending and ascending nodes at ~14:00 local time (LT) and
~02:00 LT, respectively. Calibrated CSES—01 LPs Ne observations for the years 2019–2021 provide
information in the topside ionosphere, whereas the International Reference Ionosphere model (IRI)
provides Ne values at the F2-layer peak altitude for the same time and geographical coordinates as
CSES—01. CSES—01 and IRI Ne datasets are used as anchor points to infer H0 by assuming a linear
scale height in the topside representation given by the NeQuick model. COSMIC/FORMOSAT—3
(COSMIC—1) radio occultation (RO) data are used to constrain the vertical gradient of the effective
scale height in the topside ionosphere in the linear approximation. With the CSES—01 dataset, we
studied the global behavior of H0 for daytime (~14:00 LT) and nighttime (~02:00 LT) conditions,
different seasons, and low solar activity. Results from CSES—01 observations are compared with those
obtained through Swarm B satellite Ne-calibrated measurements and validated against those from
COSMIC—1 RO for similar diurnal, seasonal, and solar activity conditions. H0 values modeled by
using CSES—01 and Swarm B-calibrated observations during daytime both agree with corresponding
values obtained directly from COSMIC—1 RO profiles. Differently, H0 modeling for nighttime
conditions deserves further investigation because values obtained from both CSES—01 and Swarm
B-calibrated observations show remarkable and spatially localized differences compared to those
obtained through COSMIC—1. Most of the H0 mismodeling for nighttime conditions can probably
to be attributed to a sub-optimal spatial representation of the F2-layer peak density made by the
underlying IRI model. For comparison, H0 values obtained with non-calibrated CSES—01 and Swarm
B Ne observations are also calculated and discussed. The methodology developed in this study for
the topside effective scale height modeling turns out to be applicable not only to CSES—01 satellite
data but to any in situ Ne observation by low-Earth-orbit satellites orbiting in the topside ionosphere.
Type
article
File(s)![]()
Name
2023_Universe_CSES.pdf
Description
Open Access published article
Size
2.04 MB
Format
Adobe PDF
Checksum (MD5)
The MD5 message-digest algorithm can be used to verify the integrity of the file that you have uploaded. You can calculate its value locally via tools that are generally available in each operative system like md5sum
4762242afed94e7c52447efea6020fc2
