Affiliation
Permanent URI for this communityhttps://www.earth-prints.org/handle/2122/1
Browse
15177 results
Filters
Settings
The search returned 15177 results
Search Results
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Eddy diffusivity derived from drifter data for dispersion model applications
(2012-08-18); ; ; ; Ocean transport and dispersion processes are at the present time simulated using Lagrangian stochastic models coupled with Eulerian circulation models that are supplying analyses and forecasts of the ocean currents at unprecedented time and space resolution. Using the Lagrangian approach, each particle displacement is described by an average motion and a fluctuating part. The first one represents the advection associated with the Eulerian current field of the circulation models while the second one describes the sub-grid scale diffusion. The focus of this study is to quantify the sub-grid scale diffusion of the Lagrangian models written in terms of a horizontal eddy diffusivity. Using a large database of drifters released in different regions of the Mediterranean Sea, the Lagrangian sub-grid scale diffusion has been computed, by considering different regimes when averaging statistical quantities. In addition, the real drifters have been simulated using a trajectory model forced by OGCM currents, focusing on how the Lagrangian properties are reproduced by the simulated trajectories.342 101 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Historical Memory as an Effective and Useful Tool for Proper Land Use Planning: Lessons Learnt from Some Italian Cases
Many Italian cities and towns have been affected by geological or geohydrological processes. However, due to the loss of historical memory, lessons of the past have been ignored; new urbanized areas have expanded into the same zones where damage and casualties occurred in the past. Despite current practices, researchers are showing how historical data can be among the most valid tools for identifying the most affected and hazardous areas. When the completeness and quality of historical sources are sufficiently high, we can make useful statistical inferences regarding the spatiotemporal variations of natural processes. This information is of great importance for land use planning, as it makes us able to rely not only on the current state of the investigated areas but also on their dynamic evolutionary framework over time. In this article, we present a chronological review of past Italian works describing the occurrence of natural extreme events making use of historical data. Then, we present some Italian case studies in which the awareness of hazards gained by paying attention to past information would have ensured better management of the risk for the benefit of public safety. Finally, the authors stress the need to safeguard, manage, and enhance the large collection of historical data that constitutes Italy’s heritage.59 103 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Volcanic deformation and flank instability due to magmatic sources and frictional rheology: the case of Mount Etna
(2012); ; ; ;Cianetti, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Pisa, Pisa, ItaliaGiunchi, C.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Pisa, Pisa, ItaliaThe overall picture of Mount Etna deformation emerging since a couple of decades of geodetic surveys shows effects of magma accumulation, characterized by inflation/deflation cycle, accompanied by a sliding instability of the southeast flank, whose manifestation is an increase in the horizontal deformation away from the volcano summit. This is a very interesting case to test whether advanced models, taking into account topography, internal structure and frictional rheology, may contribute to a better understanding of the complex interplay among mechanical response, magmatic activity and gravitational load occurring in a volcanic system. Using finite element numerical models we make predictions of surface displacements associated with a simple expansion source and with a dike like vertical discontinuity. A new methodology is developed to initalize the lithostatic stress field according to the material and geometrical complexities of the models considered. Our results show that, while an amplification of the horizontal displacement can be easily obtained up to a maximum distance of 10 km from the source, we have not been able to find any onfiguration to extend further this signal. For the case of Mount Etna this suggests that the large horizontal displacements observed in the east flank along the coast cannot be directly related to magma accumulation below the volcano's summit.560 423 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Analysis of the 2001 lava flow eruption of Mt. Etna from three-dimensional mapping
(2007); ; ; ; The 2001 Etna eruption was characterized by a complex temporal evolution with the opening of seven eruptive fissures, each feeding different lava flows. This work describes a method adopted to obtain the three-dimensional geometry of the whole lava flow field and for the reconstruction, based on topographic data, of the temporal evolution of the largest lava flow emitted from a vent located at 2100 m a.s.l. Preeruption and posteruption Digital Elevation Models (DEM) were extracted from vector contour maps. Comparison of the two DEMs and analysis of posteruption orthophotos allowed us to estimate flow area, thickness, and bulk volume. Additionally, the two-dimensional temporal evolution of the 2100 flow was precisely reconstructed by means of maps compiled during the eruption. These data, together with estimates of flow thickness, allowed us to evaluate emitted lava volumes and in turn the average volumetric flow rates The analysis performed in this paper provided, a total lava bulk volume of 40.1 106 m3 for the whole lava flow field, most of which emitted from the 2100 vent (21.4 106 m3). The derived effusion rate trend shows an initial period of waxing flow followed by a longer period of waning flow. This is in agreement not only with the few available effusion rate measurements performed during the eruption, but also with the theoretical model of Wadge (1981) for the temporal variation in discharge during the tapping of a pressurized source425 23 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Alcune considerazioni su rumore e non linearità nelle reti connesse in cascata
(2007); ;Sciacca, U.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, ItaliaLa presente è una breve nota scritta allo scopo di richiamare i concetti principali relativi a due parametri caratterizzanti i ricevitori o, più in generale, sistemi che trattano segnali in transito: la cifra di rumore e il punto di intercetta del terz'ordine, con indicazioni sul modo di misurare il primo in laboratorio. Non vengono approfondite le varie cause del rumore (es. termico, "shot", ecc.) e la sua distribuzione spettrale (bianco, rosa). Le considerazioni che seguono si applicano a qualunque dispositivo e in linea di principio a qualunque tipo di rumore, sebbene di solito trovino naturale applicazione per il rumore termico "bianco", vale a dire costante in potenza a tutte le frequenze. Un discorso a parte invece andrebbe fatto per tutte quelle sorgenti di disturbo che sono concentrate in banda. Tali disturbi sono causati da interferenze o diafonie dovute a sorgenti fisiche che emettono energia non voluta. Può succedere che altri disturbi siano originati all'interno del dispositivo per effetti indesiderati (es. interferenze immagine, spurie per effetti non lineari). Tali disturbi non rientrano propriamente nella definizione di rumore, perché sono concentrate a particolari frequenze, mentre per rumore si intende qualcosa che occupa una banda estesa. Inoltre, da un punto di vista statistico, il rumore è incoerente, mentre le interferenze e le spurie sono segnali certi, perciò la valutazione del loro effetto va fatta con metodi diversi, che non sono trattati in questa sede. Il punto di intercetta del terz'ordine è usato per caratterizzare la linearità del ricevitore; anche per esso valgono alcune regole per il calcolo del parametro in caso di reti in cascata, difficilmente reperibili in letteratura.161 152 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Correction: Marchese et al. Mt. Etna Paroxysms of February–April 2021 Monitored and Quantified through a Multi-Platform Satellite Observing System. Remote Sens. 2021, 13, 3074
In the original article [1], there were some mistakes in Figures 4 and 8, and Sections ‘Abstract’, ‘Discussion’, and ‘Conclusions’. The correct contents appears below. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. The original article has been updated.188 85 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Detailed analysis of wave propagation beneath the Campi Flegrei Caldera, Italy
(2007-04); ; ; ;Nisii, V.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione OV, Napoli, ItaliaSaccorotti, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione OV, Napoli, ItaliaWe investigate the complex propagation of seismic waves beneath the Campi Flegrei caldera, Italy, using multichannel recordings of artificial explosions. The sources consisted of air gun explosions shot in the Gulf of Pozzuoli at offsets ranging between 3 and 7 km. A multichannel recording device was deployed in the Solfatara crater and consisted of ten vertical-component and two three-component short-period seismometers with a maximum aperture of about 150 m. The zero-lag correlation (ZLC) technique was adopted to estimate horizontal slowness and backazimuth of coherent waves crossing the array. For sources located in the northern sector of the Gulf, with maximum offset 5 km, ray parameters and backazimuths are in agreement with those predicted for the 1D velocity model used for routine locations. For sources at offsets larger than approximately 5 km, the ZLC curves depict prominent maxima associated with a secondary phase propagating with a lower velocity than the first-arrival P wave. Using finite-difference synthetic seismograms generated for a 2D realistic velocity model, we explain these late arrivals in terms of a lateral velocity variation located at depths of about 1 km. Such discontinuity would correspond to a positive V (sub p) anomaly imaged by a recent 3D tomographic study, and interpreted as the submerged southern rim of Campi Flegrei caldera collapsed during the explosive eruption of 12 ky B.P. The small spacing among adjacent shot points allowed simultaneous wave-field decomposition at the source and receiver arrays. Using a modified version of the double-beam method, we retrieve the independent variation of horizontal slowness at both the source and receiver regions. For both cases, we found azimuthal deviations as large as 50 degrees with respect to the great circle path. At the source region, these discrepancies may be interpreted in terms of ray bending at the interface of the aforementioned positive anomaly. At the receiver array, the observed anomalies may be attributed to either velocity variations marking the Solfatara crater rim, or to a near-receiver, low-velocity body whose position would coincide with negative gravimetric anomalies and a high V (sub p) /V (sub s) ratio region inferred by independent geophysical and seismological studies.171 23 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Three-dimensional image of seismic refraction tomography and electrical resistivity tomography survey in the castle of Occhiolà (Sicily, Italy)
(2007); ; ; ; Leucci, G.; Università di LecceItaly), a medieval village located at the north-western part of a hill named ‘‘Terravecchia’’ at 491 m asl. In order to map the archaeological structures (such as walls and burrows), Electrical resistivity tomography (ERT) and seismic-refraction tomography methods were used. The resistivity variations are known to correlate quite well with the lithology, thus providing important information for identifying the buried archaeological remains. On the other hand, seismic velocity variations provide information about the geometrical features of the remains. The two geophysical methods are used in an enjoined way to better aid the interpretation and evaluate the significance and reliability of the results obtained with each single method. The electrical and seismic data are displayed in three dimensions by using the iso-resistivity and iso-velocity surfaces, respectively. This allows us to effectively define the location of the anomalies present in the single electrical and seismic sections. The results obtained in the survey highlight the presence of structures of regular shape, probably due to features of archaeological interest.183 38 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The Adriatic lithosphere is a promontory of the African plate: Evidence of a continuous mantle lid in the Ionian Sea from efficient Sn propagation
(2001); ;Mele, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, ItaliaEvidence of a continuous lithosphere between the northern margin of Africa and Italy is given from the analysis of regional waveforms recorded by the Italian Seismic Network. Frequency and amplitude of shear waves Sn propagating over the Ionian Sea and the western part of the Levantine Sea are examined in this study. An important observation is that Sn waves are efficiently transmitted without exception at epicentral distances ranging from 3˚ to 22.5˚. The very efficient propagation of uppermost mantle shear waves implies that mantle lithosphere is continuous in this part of the Mediterranean region. This in turn implies that the lithosphere underlying the Adriatic Sea is attached to the African lithosphere and can be considered a promontory of the major African plate. The regional shear phase Lg, that typically propagates within the continental crust, is not transmitted in this area. This observation is consistent with the presence of oceanic crust in the eastern Mediterranean, as hypothesized by previous studies.208 26 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Erosion of the continental lithosphere at the cusps of the Calabrian arc: Evidence fromSreceiver functions analysis
(2011); ; ;Miller, M. S. ;Piana Agostinetti, N.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, ItaliaMediterranean tectonics has been characterized by an irregular, complex temporal evolution with episodic rollback and retreat of the subducted plate followed by period of slow trench-migration. To provide insight into the geodynamics of the Calabrian arc, we image the characteristics and lithospheric structure of the convergent, Apulian and Hyblean forelands at the cusps of the arc. Specifically we investigate the crustal and lithospheric thicknesses using teleseismic S-to-p converted phases, applied to the Adria-Africa plate margin for the first time. We find that the Moho in the Apulian foreland is nearly flat at ∼30 km depth, consistent with previous P receiver functions results, and that the Hyblean crustal thickness is more complex, which can be understood in terms of the nature of the individual pieces of carbonate platform and pelagic sediments that make up the Hyblean platform. The lithospheric thicknesses range between 70–120 km beneath Apulia and 70–90 km beneath Sicily. The lithosphere of the forelands at each end of the Calabrian arc are continental in nature, buoyant compared to the subducting oceanic lithosphere and have previously been interpreted as mostly undeformed carbonate platforms. Our receiver function images also show evidence of lithospheric erosion and thinning close to Mt. Etna and Mt. Vulture, two volcanoes which have been associated with asthenospheric upwelling and mantle flow around of the sides the slab. We suggest that as the continental lithosphere resists being subducted it is being thermo-mechanically modified by toroidal flow around the edges of the subducting oceanic lithosphere of the Calabrian arc.245 16
