Artale Harris, Pietro
Preferred name
Artale Harris, Pietro
Email
pietro.artale@ingv.it
ORCID
15 results
Filters
Settings
The search returned 15 results
Now showing 1 - 10 of 15
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , COMPARING 1D/3D GROUND MOTION SIMULATIONS FOR EARTHQUAKES IN CENTRAL ITALY
The seismic activity known as the Amatrice-Visso-Norcia seismic sequence began on August 24th, 2016, with the M6.2 earthquake in Amatrice, Italy. This sequence included eight additional earthquakes with magnitudes above 5.0, which caused significant damage to nearby villages. The largest and most significant event occurred on October 30th, 2016, with a magnitude of 6.5 in Norcia, central Apennines. In this study, we perform physics-based simulations and investigate the ground motion variability for Norcia and Amatrice earthquakes using the Pitarka et al. (2021a) and Akinci et al. (2023) simulation approaches, respectively. We generated broad-band ground-motion acceleration time histories (0-10Hz) for these two earthquakes using frequency-wavenumber Green’s functions (FK approach) and kinematic rupture models generated with the Graves and Pitarka (2016) technique. The FK Green’s functions (GF) were computed using the propagator matrix method of Zhu and Rivera (2002) and a 1D velocity model of Central Italy (CIA) (Hermann et al., 2011). The FK-based broad-band simulation method allows for fast and realistic generation of synthetic time histories, provided that appropriate GF repository and source rupture models are available. Finally, we analyzed the performance of our 1D simulation approach by comparing our synthetic ground motions with those computed with a regional 3D velocity model and the recorded ones. We found that the FK-based simulation approach and the 1D CIA velocity model produce ground motion that compares well with recorded data throughout the region in the modeled frequency range 0-10 Hz. Because this simulation technique is very fast and reliable, it can be used to produce ground motion maps soon after a major earthquake, and in computing scenario-based ground motion for seismic hazard assessment in Central Italy.62 181 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Impact of the Earthquake Rupture on Ground-Motion Variability of the 24 August 2016 M w 6.2 Amatrice, Italy, Earthquake
([Stanford Calif.]: Seismological Society of America, [1911-, 2024-07-26); ; ; ; The devastating 24 August 2016 M w 6.2 earthquake that struck Amatrice, Italy, marked the beginning of a prolonged seismic sequence dominated by three subsequent M w ≥ 6.0 events in the central Apennines region. The earthquake destroyed Amatrice's historic center, claiming the lives of 299 individuals and causing widespread damage in the neighboring villages. The severity of the ground shaking, with a recorded maximum acceleration of 850 cm= s 2 on the east-west component at the Amatrice station, was far greater than the predicted acceleration based on the Italian ground-motion model (GMM). As pointed out by several investigations, the observed ground-motion amplitude and its spatial variability during the earthquake can be linked to specific rupture characteristics, including slip distribution and rupture directivity effects revealed by the observed data (Tinti et al., 2016; Pischiutta et al., 2021). In this study, we conducted physics-based 3D numerical simulations of ground motion for the Amatrice earthquake for frequencies up to 3 Hz. We employed a series of kinematic rupture models and a well-constrained local 3D velocity model incorporating surface topography. The kinematic rupture realizations were generated using multiscale hybrid and fully stochastic models, following the technique proposed by Graves and Pitarka (2016). We focused on assessing the sensitivity of near-fault ground-motion amplitudes to earthquake rupture characteristics, in particular, the spatial slip pattern. To evaluate the quality of our simulations, we employed goodness-of-fit measurements performed in comparisons of simulated and recorded ground motions. The simulated ground motions compare well with the recorded data and predictions from GMMs for Italy, ITA18 (Lanzano et al., 2019). However, we found that the simulated interevent ground-motion variability (randomness in the source process) of peak ground velocity, σ (PGV) is higher than the constant σ (PGV) predicted by conventional GMMs. Our simulations using several rupture scenarios demonstrate that the near-fault groundmotion amplification pattern is directly related to the slip distribution pattern. KEY POINTS • The near-fault ground-motion amplification pattern is related to the size and distribution of the slip. • The rupture directivity is controlled by location of the rupture initiation relative to the large slip patches. • Peak ground velocity interevent variability is distance dependent and higher at shorter distances than that of constant ground-motion models.12 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , On the 2016-2017 Central Italy Seismic Sequence: Uncertainty for Source Parameters of Mainshocks and Revised Catalogue of Moment Tensors
The Central Italy seismic sequence began on August 24th, 2016, and was marked by three mainshocks in two months culminated with the Mw 6.5, October 30th, 2016, event. Location, depth and prevalent normal faulting mechanisms indicate that the sequence originated in the shallow crust of the Apennine chain where the current extensional regime overprints contractional structures. Structural complexity plays a major role in fault segmentation and interaction in this region, with important consequences on seismic behavior and mechanics of earthquake faulting. This complexity is evidenced by the co-existence of fault planes with different focal mechanisms in the same area. Here we analyze the robustness of moment tensor solutions for the three mainshocks of the 2016-2017 Central Italy sequence. In particular, we study the effect of number and distribution of the inverted stations and employed wave speed model (1D and 3D) with the goal of providing more reliable estimates of the source parameters (strike, dip, rake and Mw) and corresponding uncertainties. The latter are estimated by performing a bootstrap analysis on hundreds of solutions computed by varying the distribution of stations for 1D and 3D velocity models. Moreover, we report on reviewed source geometries of the Central Italy sequence as retrieved by moment tensor analysis by integrating the actual TDMT revised catalogue (http://terremoti.ingv.it/tdmt) for M4+, with new updated solutions based on a new Italian 3D wave speed model. The realization of a complete moment tensor catalogue, in addition to the estimate of uncertainties associated to the computed focal planes and Mw for the three mainshocks, can contribute to explain the complexity of the seismogenic processes active in the Central Apennines and help in understanding the main features of this seismic sequence.23 31 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , DARE to Perform Seismological Workflows
The DARE e-science platform (http://project-dare.eu) offers innovative tools to ease scientific workflow development and execution exploiting efficient Cloud resources. It aims to enable on-demand numerical computations and analyses, fast large dataset handling, flexible and customisable workflow pipelines and complete provenance tracking. It also integrates available e-infrastructure services (e.g. EUDAT, EIDA) and can be linked to user developed interfaces. DARE is validated via two domain-specific pilots, one from the climate modelling community and one from the seismological research field. Focusing on the latter, the EPOS Use Case is driven by urgent issues and general user needs of solid Earth Science community, following developments and application standards in the computational seismology research society. This Use Case also benefits from the pioneering experience of previous European projects (e.g. VERCE, EPOS-IP) in this framework. We present here the development of a scientific workflow to perform a quick calculation of seismic source parameters after an earthquake. The workflow requirements include HPC calculations (on local-institutional or Cloud resources), fast data-intensive processing, provenance exploitation and seismic source inverse modelling tools. The DARE platform automatically conducts the required actions optimally mapped to computational resources, linking them together by managing intermediate data. It automatically deploys the necessary environment to perform on-demand transparent computations executing a dockerised version of the numerical simulation code on a Kubernetes cluster via a web API. Other API calls allow for remote, distributed execution of dispel4py workflows, used to describe the steps for data analysis and download of seismic recorded data via EIDA Research Infrastructure services. Well established scientific python codes, such as those for waveform misfit calculation and source inversion, are thus easily implemented in this flexible and modular structure, and executed at scale. Moreover, the pilot requirement of searching and reusing multiple simulations for the same earthquake strongly benefits from customisable management of metadata and lineage through the DARE platform exploiting the integration of S-ProvFlow with dispel4py.85 118 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Heterogeneous perturbation of fluid density and solid elastic strain in consolidating porous media
The occurrence of heterogeneous perturbations of fluid mass density and solid elastic strain of a porous continuum, as a consequence of its undrained response is a very important topic in theoretical and applied poromechanics. The classical Mandel-Cryer effect provides an ex- planation of fluid overpressure in the central region of a porous sample, immediately after the application of the loading. However this effect fades away when the fluid leaks out of the porousnetwork.Herethisproblemisstudiedwithintheframeworkofasecondgradientthe- ory and a thorough description of the static and the dynamics of the phenomenon is given. We study how the presence of an impermeable wall affects the formation of the interface between two phases differing in the fluid content. Moreover, we show that the late time in- terface motion towards its stationary position is not affected by the impermeable wall and is characterizedby acommonseepagevelocity profile.27 1 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Nonlinear heat conduction equations with memory: physical meaning and analytical results
We study nonlinear heat conduction equations with memory effects within the framework of the fractional calculus approach to the generalized Maxwell-Cattaneo law. Our main aim is to derive the governing equations of heat propagation, considering both the empirical temperature-dependence of the thermal conductivity coefficient (which introduces nonlinearity) and memory effects, according to the general theory of Gurtin and Pipkin of finite velocity thermal propagation with memory. In this framework, we consider in detail two different approaches to the generalized Maxwell-Cattaneo law, based on the application of long-tail Mittag-Leffler memory function and power law relaxation functions, leading to nonlinear time-fractional telegraph and wave-type equations. We also discuss some explicit analytical results to the model equations based on the generalized separating variable method and discuss their meaning in relation to some well-known results of the ordinary case.86 217 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Nonlinear time-fractional dispersive equations
(2014); In this paper we study some cases of time-fractional nonlinear dispersive equations (NDEs) involving Caputo derivatives, by means of the invariant subspace method. This method allows to find exact solutions to nonlinear time-fractional partial differential equations by separating variables. We first consider a third order time-fractional NDE that admits a four-dimensional invariant subspace and we find a similarity solution. We also study a fifth order NDE. In this last case we find a solution involving Mittag-Leffler functions. We finally observe that the invariant subspace method permits to find explicit solutions for a wide class of nonlinear dispersive time-fractional equations.21 94 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Centroid Moment Tensor Catalog With 3D Lithospheric Wave Speed Model: The 2016–2017 Central Apennines Sequence
Moment tensor inversions of broadband velocity data are usually managed by adopting Green's functions for 1D layered seismic wave speed models. This assumption can impact on source parameter estimates in regions with complex 3D heterogeneous structures and discontinuities in rock properties. In this work, we present a new centroid moment tensor (CMT) catalog for the Amatrice-Visso-Norcia (AVN) seismic sequence based on a recently generated 3D wave speed model for the Italian lithosphere. Forward synthetic seismograms and Fréchet derivatives for CMT-3D inversions of 159 earthquakes with Mw ≥ 3.0 are simulated using a spectral-element method (SEM) code. By comparing the retrieved solutions with those from time domain moment tensor (TDMT) catalog, obtained with a 1D wave speed model calibrated for Central Apennines (Italy), we observe a remarkable degree of consistency in terms of source geometry, kinematics, and magnitude. Significant differences are found in centroid depths, which are more accurately estimated using the 3D model. Finally, we present a newly designed parameter, τ, to better quantify and compare a-posteriori the reliability of the obtained MT solutions. τ measures the goodness of fit between observed and synthetic seismograms accounting for differences in amplitude, arrival time, percentage of fitted seconds, and the usual L2-norm estimate. The CMT-3D solutions represent the first Italian CMT catalog based on a full-waveform 3D wave speed model. They provide reliable source parameters with potential implications for the structures activated during the sequence. The developed approach can be readily applied to more complex Italian regions where 1D models are underperforming and not representative of the area.126 114 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Editorial: Physical and statistical approaches to earthquake modeling and forecasting
earthquake forecasting and testing, ETAS model, operational earthquake forecasting, statistical seismology, short-term seismic hazard assessmen28 94 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Broadband Near-Fault Ground-Motion Simulations Using a Modified f-k Method in Central Italy
([Stanford Calif.]: Seismological Society of America, [1911-, 2026); ; ; ;Cuius, AriannaIn this study, we simulate ground motions for three major earthquakes that occurred in Central Italy: the 2009 M w 6.3 L'Aquila earthquake and the two largest events of the 2016 Amatrice-Visso-Norcia sequence, the M w 6.2 Amatrice and M w 6.5 Norcia earthquakes. These events caused widespread damage, intense ground shaking, and casualties, making them key cases for evaluating and improving ground-motion modeling techniques, especially given the high-quality recordings available from near-source stations. We use the frequency-wavenumber (f-k) method to generate broadband synthetic ground motions ≤ 7 Hz. This approach balances computational efficiency with physical accuracy, making it well suited for regional-scale applications. Green's functions are computed from the Central Italian Apennines 1D layered velocity model (Herrmann et al., 2011), and kinematic rupture models are generated using the methodology of Graves and Pitarka (2016; hereafter, GP16), implemented into the f-k framework. Site response is incorporated using frequency-dependent nonlinear amplification factors (Borcherdt, 1994). We evaluate the simulations through a detailed comparison with observed ground motions using RotD50 spectral acceleration and a goodness-of-fit analysis. In addition to simulations at recorded stations, we compute ground motions over a dense grid of virtual sites to assess spatial variability and source-related effects such as rupture directivity and regional amplification. Results are benchmarked against predictions from the empirical ground-motion model ITA18 (Lanzano et al., 2019). Our findings demonstrate that the f-k method can reproduce key features of observed ground motion with good agreement, capturing both near-fault effects and broader regional trends. This study demonstrates that the f-k approach offers a computationally efficient and physically robust alternative for deterministic groundmotion simulation, bridging empirical models and 3D simulations for practical use in hazard scenarios and urgent computing workflows. KEY POINTS • The frequency-wavenumber (f-k) method with 1D models efficiently simulates broadband ground motion ≤7 Hz. • Hybrid rupture models capture rupture directivity effects observed in the L'Aquila and Amatrice events. • Simulations show satisfactory agreement with recorded data and enable rapid regional seismic hazard assessment.8
