Magnoni, Federica
Preferred name
Magnoni, Federica
Email
federica.magnoni@ingv.it
Staff
staff
ORCID
31 results
Filters
Settings
The search returned 31 results
Now showing 1 - 10 of 31
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Radially Anisotropic 3D Velocity Model of the Central Apennines Lithosphere: The CI 23 Model
(Washington, DC: American Geophysical Union, 2025-02-03); ; ; ; We present the first application of Full-Waveform Inversion (FWI) for a radially anisotropic 3D velocity model of the lithosphere beneath central Italy. The retrieved model CI 23 constrains P-wave (V PV , V PH) and S-wave velocities (V SV , V SH) in the period range 8-50 s. CI 23 model correlates well with regional lithological formations and highlights a negative radial anisotropy anomaly (V SH < V SV) localized beneath the epicentral region of the 2016-2017 Amatrice-Visso-Norcia (AVN) seismic sequence. An opposite trend (positive radial anisotropy anomaly, i.e. V SH > V SV) is observed in the area affected by the 2009 L'Aquila (AQ) seismic sequence. We interpret the velocity anomalies in terms of local tectonic structures, particularly the Olevano-Antrodoco-Sibillini (OAS) thrust-Gran Sasso Thrust (GST) systems, while also considering possible evidence of overpressured fluids and fluid migration. Additionally, the observed anomalies may reflect transient velocity variations induced by the ANV and AQ seismic sequences. Plain Language Summary Full-Waveform Inversion (FWI) retrieves accurate Earth models using complete waveform data. Here we implement this imaging technique to retrieve the first radially anisotropic 3D velocity model of the lithosphere beneath central Italy, one of the region with highest seismic hazard in Italy. The model highlights spatial variations of velocities that likely reflect local tectonics and fluid processes. Since the inverted data set mainly encompasses the two major sequences affecting the region (the 2016-2017 Amatrice-Visso-Norcia and the 2009 L'Aquila seismic sequences), we cannot exclude that the observed anomalies reflect transient variations of elastic properties induced by large seismic events along with their aftershocks.13 56 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Breaking Adria and Southern Italy: adjoint tomography of an intricate lithosphere
High-resolution adjoint tomography has emerged as a powerful tool for unraveling the complexities of the Earth's lithosphere. We present an overview of the analysis conducted on the seismic images generated by the application of high-resolution adjoint tomography for the lithosphere beneath Southern Italy and the Adriatic region. Recently, we have proposed IMAGINE_IT, a reference 3D high-resolution seismic tomography model for tectonic and geological structures of the Italian lithosphere. Enhanced accuracy is enabled by state-of-the-art methods, including three-dimensional wavefield simulations based on SPECFEM3D in combination with an adjoint-state method. Adria plate plays a peculiar role in the geodynamics of the Central Mediterranean. It is the foreland of non-coeval mountain ranges and its margins are consumed in the process by subduction systems under the Alps to the north, the Apennines to the west and the Dinarides to the east. The complex behavior of this system and the large geographical heterogeneity in data availability lead to a fragmented understanding of the Adria plate. In particular, its lithospheric structure, in terms of Vp and Vs profiles, is poorly known due to a lack of seismic stations, poor earthquake location quality (large observational gaps), and the consequent lack of coverage by classical seismic tomography methods. The uncertainties increase the difficulty of correctly assessing the seismic hazard along the Adriatic coasts (including tsunami hazard evaluation). Here, we present additional details of this region, such as the mid-Adriatic ridge, and a preliminary set of iterations that exploit 7 years of additional data (IMAGINE_IT was limited to data until 2015) and the recent deployment of very dense regional arrays of broadband seismic stations– the 2016-2019 AlpArray and the AdriaArray Seismic Network currently under installation – which provide a new opportunity to improve our comprehension of the area. Furthermore, we focus on southern Italy, starting from L’Aquila region up to Calabrian Arc. The analysis of the images produced by high-resolution adjoint tomography IMAGINE_IT reveals intricate details of the lithospheric architecture, including crustal thickness variations, seismic velocity anomalies, and (lack of) subduction-related features.36 98 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Adjoint tomography of the Italian lithosphere
The evolution and state of geological structure at Earth’s surface is best understood with an accurate characterization of the subsurface, where fluid distribution plays a key role. We present high-resolution seismic tomographic images of tectonic and geological features of the Italian lithosphere based on ground motion recordings and obtained through an iterative procedure. Enhanced accuracy is enabled by state-of-the-art three-dimensional wavefield simulations in combination with an adjoint-state method. The resulting tomographic model characterizes the subsurface structure in terms of compressional and shear wavespeed values at remarkable resolution, corresponding to a minimum period of ~10 s. As primary findings of our work, images of the lithospheric structure in Central Italy are consistent with recent studies on the distribution of fluids and gas (CO2) within the Italian subsurface, allowing us to infer the presence of deep melted material that induces shallow gas fluxes, or traps and deep storage of gas that can be correlated with seismicity. We illuminate Mt. Etna volcano and support the hypothesis of a deep reservoir (~30 km) feeding an intermediate-depth magma-filled intrusive body, which in turn is connected to a shallow chamber. We also investigate the intriguing features of the Adriatic plate offshore of the eastern Italian coast. Tomographic evidence reveals a structure of the plate made of two distinct microplates with different fabric and behavior, and separated by the Gargano deformation zone, indicating a complex lithosphere and tectonic evolution.31 71 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Breaking Adria: adjoint tomography of a disappearing continental microplate
The Adria plate plays a peculiar role in the geodynamics of the Central Mediterranean. It is the foreland of non-coeval mountain ranges and its margins are consumed in the process by subduction systems under the Alps to the north, the Apennines to the west and the Dinarides to the east. The complex behavior of this system and the large heterogeneity in data availability lead to a fragmented understanding of the Adria plate. In particular, its lithospheric structure, in terms of Vp and Vs profiles, is poorly known due to a lack of seismic stations, poor earthquake location quality (large observational gaps) and the consequent lack of coverage by classical seismic tomography methods. The uncertainties increase the difficulty of correctly assessing the seismic hazard along the Adriatic coasts (including tsunami hazard). Recently, we have proposed IMAGINE_IT, a reference 3D high-reso- lution seismic tomography of the Italian lithosphere. Enhanced accuracy is enabled by three-dimensional wavefield simulations based on SPECFEM3D in combination with an adjoint-state method. The Adria plate is located at the eastern border of the volume considered in the simulations, nevertheless, our tomography is able to image this plate with an unprecedented resolution and supports the idea that it is made of two distinct microplates having dif- ferent fabric and behavior and separated by the Gargano deformation zone. We have highlighted a northern portion with more complex wavespeed anomalies and a thinner crust, and a southern part with a more regularly layered wavespeed structure and a thicker crust. Here, we focus on additional details of those images, such as the mid-Adriatic ridge and a new set of iterations that exploit 7 years of additional data (IMAGINE_IT was limited to data until 2015) and the 2016-2019 AlpArray very dense regional arrays of broadband seismic stations which provide a new opportunity to improve our comprehension of the area.56 110 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Central Italy high-resolution model for accurate ground motion simulation
A challenge in earthquake seismology is the provision of realistic and accurate ground-shaking scenarios for seismic hazard and risk assessment. Owing to the exponential growth of HPC resources, the application of physics-based methods to ground motion characterization has become increasingly popular. However, physics-based techniques could break down in the simulation of high-frequency ground motion, particularly at frequencies higher than 1 Hz, which are the most relevant for earthquake engineers. A main issue is represented by the limited resolution of seismic wave speed models. Currently, one of the best approaches to retrieve high-resolution wave speed models relies on the combination of the Spectral Element Method (SEM) with adjoint-state methods within the framework of (3D) Full Waveform Inversion (FWI). Here we use the Salvus software to resolve the velocity structure of central Italy, which is exposed to high seismic hazard. We invert a dataset including 248 events (occurred between 2005 and 2019, with a magnitude ranging between 2.8 and 5.5) recorded by the Italian seismic network and provided by INGV. We implement a multi-scale approach to 3D-FWI by progressively incorporating the high-frequency content of waveform recording. In the first cycle of iterations, we retrieve the long-wavelength structure of the model. At this stage, we also perform several tests, e.g. different source/receiver cutouts, to properly tune the FWI configuration parameters to our problem. Then we use the best fitting model as the initial model of a second cycle of iterations, combining it with Vs30 and topographic data. By accounting for site effects, we maximize the level of detail in the starting model, thus preventing the FWI algorithm from being trapped in local minima. The retrieved high-resolution wave speed model will shed light on the velocity structure of central Italy, thus improving the seismic hazard assessment of this region.52 86 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Adjoint Tomography of the Italian Lithosphere
The evolution and state of geological structure at Earth's surface is best understood with an accurate characterization of the subsurface. Here we present seismic tomographic images of the Italian lithosphere based on ground motion recordings and characterized by compressional and shear wavespeed structure at remarkable resolution, corresponding to a minimum period of ∼10 s. Enhanced accuracy is enabled by state-of-the-art three-dimensional wavefield simulations in combination with an adjoint-state method. We focus on three primary findings of our model Im25. It highlights the distribution of fluids and gas (CO2) within the Italian subsurface and their correlation with seismicity. It illuminates Mt. Etna volcano and supports the hypothesis of a deep reservoir (∼30 km) feeding a shallower magma-filled intrusive body. Offshore of the eastern Italian coast, it reveals that the Adriatic plate is made of two distinct microplates, separated by the Gargano deformation zone, indicating a complex lithosphere and tectonic evolution.408 158 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , S-ProvFlow. Storing and Exploring Lineage Data as a Service
We present a set of configurable Web service and interactive tools, s-ProvFlow, for managing and exploiting records tracking data lineage during workflow runs. It facilitates detailed analysis of single executions. It helps users manage complex tasks by exposing the relationships between data, people, equipment and workflow runs intended to combine productively. Its logical model extends the PROV standard to precisely record parallel data-streaming applications. Its metadata handling encourages users to capture the application context by specifying how application attributes, often using standard vocabularies, should be added. These metadata records immediately help productivity as the interactive tools support their use in selection and bulk operations. Users rapidly appreciate the power of the encoded semantics as they reap the benefits. This improves the quality of provenance for users and management. Which in turn facilitates analysis of collections of runs, enabling users to manage results and validate procedures. It fosters reuse of data and methods and facilitates diagnostic investigations and optimisations. We present S-ProvFlow’s use by scientists, research engineers and managers as part of the DARE hyper-platform as they create, validate and use their data-driven scientific workflows.68 92 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Centroid Moment Tensor Catalog With 3D Lithospheric Wave Speed Model: The 2016–2017 Central Apennines Sequence
Moment tensor inversions of broadband velocity data are usually managed by adopting Green's functions for 1D layered seismic wave speed models. This assumption can impact on source parameter estimates in regions with complex 3D heterogeneous structures and discontinuities in rock properties. In this work, we present a new centroid moment tensor (CMT) catalog for the Amatrice-Visso-Norcia (AVN) seismic sequence based on a recently generated 3D wave speed model for the Italian lithosphere. Forward synthetic seismograms and Fréchet derivatives for CMT-3D inversions of 159 earthquakes with Mw ≥ 3.0 are simulated using a spectral-element method (SEM) code. By comparing the retrieved solutions with those from time domain moment tensor (TDMT) catalog, obtained with a 1D wave speed model calibrated for Central Apennines (Italy), we observe a remarkable degree of consistency in terms of source geometry, kinematics, and magnitude. Significant differences are found in centroid depths, which are more accurately estimated using the 3D model. Finally, we present a newly designed parameter, τ, to better quantify and compare a-posteriori the reliability of the obtained MT solutions. τ measures the goodness of fit between observed and synthetic seismograms accounting for differences in amplitude, arrival time, percentage of fitted seconds, and the usual L2-norm estimate. The CMT-3D solutions represent the first Italian CMT catalog based on a full-waveform 3D wave speed model. They provide reliable source parameters with potential implications for the structures activated during the sequence. The developed approach can be readily applied to more complex Italian regions where 1D models are underperforming and not representative of the area.126 114 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Effects of surface topography in kinematic source inversion models. Application to the Norcia, Mw 6.5, 30 October 2016, Central Italy Earthquake.
(2021-12-13); ; ; ; The topography is the only ingredient of the kinematic finite fault inversion that is explicitly known. Nevertheless, such analyses commonly assume Green's functions for a 1D layered geological model with flat surface topography. Minimization of the complexity is needed to reduce the computational cost of the inversions in realistic conditions but such assumptions can significantly impact the retrieved source parameters. In particular, the lack of management of approximations and uncertainties could lead to overconfident and biased interpretations of the kinematic results. The increasing computational power available in the coming exascale era provides the opportunity to include the topography at a high resolution and low cost. We have modified the non-negative least-square inversion method of Dreger et al. [2005] for taking into account Green’s functions generated by SPECFEM3D including explicitly significant topography. We applied this new procedure to retrieve the kinematic rupture history of the 30 October 2016 Norcia earthquake (Mw 6.5), by inverting strong motion and high-rate global positioning system datasets. The considered complex fault geometry consists of a main normal fault striking N155°, dipping 47° and belonging to the Mt. Vettore‐Mt. Bove fault system (VBFS), and a secondary fault plane striking N210° and dipping 36° to the NW. The choice is supported by seismological data, geological constraints, and observed surface breakages, but also by inferences from dynamic simulations. We have inverted for slip and rake distribution on the faults while allowing a Bayesian exploration of all the remaining parameters (i.e., rupture velocity, rise time).70 54 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Breaking the Adriatic Plate: Adjoint 3D Tomography for the Italian Lithosphere
The evolution and state of geological structure at Earth’s surface is best understood with an accurate characterization of the subsurface. We present high-resolution seismic tomographic images of tectonic and geological structures of the Italian lithosphere. Enhanced accuracy is enabled by state-of-the-art methods, including three-dimensional wavefield simulations in combination with an adjoint-state method. The procedure iteratively improves an initial 3D traveltime tomography model of the region using full waveforms from 163 earthquakes recorded by 412 stations. Model Im25, resulting from 25 iterations, characterizes the subsurface structure in terms of compressional and shear wavespeeds at a resolution corresponding to a minimum period ~10 s. We discuss three primary findings of Im25 model: a) images of the lithospheric structure in Central Italy highlight the role of fluids and gas (CO2) and their correlation with seismicity, b) images of Southern Italy illuminates the plumbing system of Mt. Etna volcano, c) images of the Adriatic plate explore its complex lithosphere and tectonic evolution.78 100
