Casarotti, Emanuele
Preferred name
Casarotti, Emanuele
Email
emanuele.casarotti@ingv.it
Staff
staff
ORCID
Researcher ID
E-9337-2013
54 results
Filters
Settings
The search returned 54 results
Now showing 1 - 10 of 54
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Three-dimensional FEM derived elastic Green's functions for the coseismic deformation of the 2005Mw8.7 Nias-Simeulue, Sumatra earthquake
(2011); ; ; ; Hsu, Y.Using finite element models (FEMs), we examine the sensitivity of surface displacements to the location of fault slip, topography, and three‐dimensional variations in elastic moduli in the context of a 2‐D infinite thrust fault. We then evaluate the impact of these factors and fault geometry on surface displacements and estimates of the distribution of coseismic slip associated with the 2005 Mw 8.7 Nias‐Simeulue, Sumatra earthquake. Topographic effects can be significant near the trench, where bathymetric gradients are highest and the fault is closest to the free surface. Variations in Young’s modulus can significantly alter predicted deformation. Surface displacements are relatively insensitive to perturbations in Poisson’s ratio for shear sources, but may play a stronger role when the source has a dilatational component. If we generate synthetic displacements using a heterogeneous elastic model and then use an elastic half‐space or layered earth model to estimate the slip distribution and fault geometry, we find systematic residuals of surface displacements and different slip patterns compared to the input fault slip model. The coseismic slip distributions of the 2005 earthquake derived from the same fault geometry and different material models show that the rupture areas are narrower in all tested heterogeneous elastic models compared to that obtained using half‐space models. This difference can be understood by the tendency to infer additional sources in elastic half‐space models to account for effects that are intrinsically due to the presence of rheological gradients. Although the fit to surface observations in our preferred 3‐D FEM model is similar to that from a simple half‐space model, the resulting slip distribution may be a more accurate reflection the true fault slip behavior.110 15 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , On the 2016-2017 Central Italy Seismic Sequence: Uncertainty for Source Parameters of Mainshocks and Revised Catalogue of Moment Tensors
The Central Italy seismic sequence began on August 24th, 2016, and was marked by three mainshocks in two months culminated with the Mw 6.5, October 30th, 2016, event. Location, depth and prevalent normal faulting mechanisms indicate that the sequence originated in the shallow crust of the Apennine chain where the current extensional regime overprints contractional structures. Structural complexity plays a major role in fault segmentation and interaction in this region, with important consequences on seismic behavior and mechanics of earthquake faulting. This complexity is evidenced by the co-existence of fault planes with different focal mechanisms in the same area. Here we analyze the robustness of moment tensor solutions for the three mainshocks of the 2016-2017 Central Italy sequence. In particular, we study the effect of number and distribution of the inverted stations and employed wave speed model (1D and 3D) with the goal of providing more reliable estimates of the source parameters (strike, dip, rake and Mw) and corresponding uncertainties. The latter are estimated by performing a bootstrap analysis on hundreds of solutions computed by varying the distribution of stations for 1D and 3D velocity models. Moreover, we report on reviewed source geometries of the Central Italy sequence as retrieved by moment tensor analysis by integrating the actual TDMT revised catalogue (http://terremoti.ingv.it/tdmt) for M4+, with new updated solutions based on a new Italian 3D wave speed model. The realization of a complete moment tensor catalogue, in addition to the estimate of uncertainties associated to the computed focal planes and Mw for the three mainshocks, can contribute to explain the complexity of the seismogenic processes active in the Central Apennines and help in understanding the main features of this seismic sequence.23 31 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Forward and adjoint simulations of seismic wave propagation on fully unstructured hexahedral meshes
(2011); ; ; ; We present forward and adjoint spectral-element simulations of coupled acoustic and (an)elastic seismic wave propagation on fully unstructured hexahedral meshes. Simulations benefit from recent advances in hexahedral meshing, load balancing and software optimization. Meshing may be accomplished using a mesh generation tool kit such as CUBIT, and load balancing is facilitated by graph partitioning based on the SCOTCH library. Coupling between fluid and solid regions is incorporated in a straightforward fashion using domain decomposition. Topography, bathymetry and Moho undulations may be readily included in the mesh, and physical dispersion and attenuation associated with anelasticity are accounted for using a series of standard linear solids. Finite-frequency Fre ́chet derivatives are calculated using adjoint methods in both fluid and solid domains. The software is benchmarked for a layercake model. We present various examples of fully unstructured meshes, snapshots of wavefields and finite-frequency kernels generated by Version 2.0 ‘Sesame’ of our widely used open source spectral-element package SPECFEM3D.228 28 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Rapid Estimation of Damage to Tall Buildings Using Near Real-Time Earthquake and Archived Structural Simulations
This article outlines a new approach to rapidly estimate the damage to tall buildings immediately following a large earthquake. The preevent groundwork involves the creation of a database of structural responses to a suite of idealized ground‐motion waveforms. The postevent action involves (1) rapid generation of an earthquake source model, (2) near real‐time simulation of the earthquake using a regional spectral‐element model of the earth and computing synthetic seismograms at tall building sites, and (3) estimation of tall building response (and damage) by determining the best‐fitting idealized waveforms to the synthetically generated ground motion at the site and directly extracting structural response metrics from the database. Here, ground‐velocity waveforms are parameterized using sawtoothlike wave trains with a characteristic period (T), amplitude (peak ground velocity, PGV), and duration (number of cycles, N). The proof‐of‐concept is established using the case study of one tall building model. Nonlinear analyses are performed on the model subjected to the idealized wave trains, with T varying from 0.5 s to 6.0 s, PGV varying from 0.125 m/s, and N varying from 1 to 5. Databases of peak transient and residual interstory drift ratios (IDR), and permanent roof drift are created. We demonstrate the effectiveness of the rapid response approach by applying it to synthetic waveforms from a simulated 1857‐like magnitude 7.9 San Andreas earthquake. The peak IDR, a key measure of structural performance, is predicted well enough for emergency response decision making.81 179 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Relazione dell’attività 2019 del Gruppo di Lavoro INGVterremoti
La relazione illustra le principali attività svolte nel 2019 dal GDL INGVterremoti relativamente ai diversi canali web istituzionali e alla piattaforma INGVterremoti, fornendo ove possibile, dati statistici utili per la valutazione.40 55 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Central Italy high-resolution model for accurate ground motion simulation
A challenge in earthquake seismology is the provision of realistic and accurate ground-shaking scenarios for seismic hazard and risk assessment. Owing to the exponential growth of HPC resources, the application of physics-based methods to ground motion characterization has become increasingly popular. However, physics-based techniques could break down in the simulation of high-frequency ground motion, particularly at frequencies higher than 1 Hz, which are the most relevant for earthquake engineers. A main issue is represented by the limited resolution of seismic wave speed models. Currently, one of the best approaches to retrieve high-resolution wave speed models relies on the combination of the Spectral Element Method (SEM) with adjoint-state methods within the framework of (3D) Full Waveform Inversion (FWI). Here we use the Salvus software to resolve the velocity structure of central Italy, which is exposed to high seismic hazard. We invert a dataset including 248 events (occurred between 2005 and 2019, with a magnitude ranging between 2.8 and 5.5) recorded by the Italian seismic network and provided by INGV. We implement a multi-scale approach to 3D-FWI by progressively incorporating the high-frequency content of waveform recording. In the first cycle of iterations, we retrieve the long-wavelength structure of the model. At this stage, we also perform several tests, e.g. different source/receiver cutouts, to properly tune the FWI configuration parameters to our problem. Then we use the best fitting model as the initial model of a second cycle of iterations, combining it with Vs30 and topographic data. By accounting for site effects, we maximize the level of detail in the starting model, thus preventing the FWI algorithm from being trapped in local minima. The retrieved high-resolution wave speed model will shed light on the velocity structure of central Italy, thus improving the seismic hazard assessment of this region.52 86 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Breaking the Adriatic Plate: Adjoint 3D Tomography for the Italian Lithosphere
The evolution and state of geological structure at Earth’s surface is best understood with an accurate characterization of the subsurface. We present high-resolution seismic tomographic images of tectonic and geological structures of the Italian lithosphere. Enhanced accuracy is enabled by state-of-the-art methods, including three-dimensional wavefield simulations in combination with an adjoint-state method. The procedure iteratively improves an initial 3D traveltime tomography model of the region using full waveforms from 163 earthquakes recorded by 412 stations. Model Im25, resulting from 25 iterations, characterizes the subsurface structure in terms of compressional and shear wavespeeds at a resolution corresponding to a minimum period ~10 s. We discuss three primary findings of Im25 model: a) images of the lithospheric structure in Central Italy highlight the role of fluids and gas (CO2) and their correlation with seismicity, b) images of Southern Italy illuminates the plumbing system of Mt. Etna volcano, c) images of the Adriatic plate explore its complex lithosphere and tectonic evolution.78 100 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Breaking Adria: adjoint tomography of a disappearing continental microplate
The Adria plate plays a peculiar role in the geodynamics of the Central Mediterranean. It is the foreland of non-coeval mountain ranges and its margins are consumed in the process by subduction systems under the Alps to the north, the Apennines to the west and the Dinarides to the east. The complex behavior of this system and the large heterogeneity in data availability lead to a fragmented understanding of the Adria plate. In particular, its lithospheric structure, in terms of Vp and Vs profiles, is poorly known due to a lack of seismic stations, poor earthquake location quality (large observational gaps) and the consequent lack of coverage by classical seismic tomography methods. The uncertainties increase the difficulty of correctly assessing the seismic hazard along the Adriatic coasts (including tsunami hazard). Recently, we have proposed IMAGINE_IT, a reference 3D high-reso- lution seismic tomography of the Italian lithosphere. Enhanced accuracy is enabled by three-dimensional wavefield simulations based on SPECFEM3D in combination with an adjoint-state method. The Adria plate is located at the eastern border of the volume considered in the simulations, nevertheless, our tomography is able to image this plate with an unprecedented resolution and supports the idea that it is made of two distinct microplates having dif- ferent fabric and behavior and separated by the Gargano deformation zone. We have highlighted a northern portion with more complex wavespeed anomalies and a thinner crust, and a southern part with a more regularly layered wavespeed structure and a thicker crust. Here, we focus on additional details of those images, such as the mid-Adriatic ridge and a new set of iterations that exploit 7 years of additional data (IMAGINE_IT was limited to data until 2015) and the 2016-2019 AlpArray very dense regional arrays of broadband seismic stations which provide a new opportunity to improve our comprehension of the area.57 111 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , DARE to Perform Seismological Workflows
The DARE e-science platform (http://project-dare.eu) offers innovative tools to ease scientific workflow development and execution exploiting efficient Cloud resources. It aims to enable on-demand numerical computations and analyses, fast large dataset handling, flexible and customisable workflow pipelines and complete provenance tracking. It also integrates available e-infrastructure services (e.g. EUDAT, EIDA) and can be linked to user developed interfaces. DARE is validated via two domain-specific pilots, one from the climate modelling community and one from the seismological research field. Focusing on the latter, the EPOS Use Case is driven by urgent issues and general user needs of solid Earth Science community, following developments and application standards in the computational seismology research society. This Use Case also benefits from the pioneering experience of previous European projects (e.g. VERCE, EPOS-IP) in this framework. We present here the development of a scientific workflow to perform a quick calculation of seismic source parameters after an earthquake. The workflow requirements include HPC calculations (on local-institutional or Cloud resources), fast data-intensive processing, provenance exploitation and seismic source inverse modelling tools. The DARE platform automatically conducts the required actions optimally mapped to computational resources, linking them together by managing intermediate data. It automatically deploys the necessary environment to perform on-demand transparent computations executing a dockerised version of the numerical simulation code on a Kubernetes cluster via a web API. Other API calls allow for remote, distributed execution of dispel4py workflows, used to describe the steps for data analysis and download of seismic recorded data via EIDA Research Infrastructure services. Well established scientific python codes, such as those for waveform misfit calculation and source inversion, are thus easily implemented in this flexible and modular structure, and executed at scale. Moreover, the pilot requirement of searching and reusing multiple simulations for the same earthquake strongly benefits from customisable management of metadata and lineage through the DARE platform exploiting the integration of S-ProvFlow with dispel4py.85 118 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Towards Addressing CPU-Intensive Seismological Applications in Europe
(Springer Berlin Heidelberg, 2013); ; ; ; Advanced application environments for seismic analysis help geosci- entists to execute complex simulations to predict the behaviour of a geophysical system and potential surface observations. At the same time data collected from seismic stations must be processed comparing recorded signals with predictions. The EU-funded project VERCE (http://verce.eu/) aims to enable specific seismological use-cases and, on the basis of requirements elicited from the seis- mology community, provide a service-oriented infrastructure to deal with such challenges. In this paper we present VERCE’s architecture, in particular relating to forward and inverse modelling of Earth models and how the, largely file-based, HPC model can be combined with data streaming operations to enhance the scala- bility of experiments. We posit that the integration of services and HPC resources in an open, collaborative environment is an essential medium for the advancement of sciences of critical importance, such as seismology.186 24
