Skip to main content
The search returned 125 results
Now showing 1 - 10 of 125
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismicity and seismogenic structures of Central Apennines (Italy): constraints on the present-day stress field from focal mechanisms – The SLAM (Seismicity of Lazio-Abruzzo and Molise) project

    The aim of the SLAM (Seismicity of Lazio, Abruzzo and Molise region) project is to provide new insight on the seismotectonic and seismogenesis of a wide portion of central Italy situated between areas affected by recent destructive events such as the 2009, Mw = 6.3, L’Aquila earthquake to the north and the 2002, Mw = 5.8, Molise earthquake to the east. We present new results for the microseismic activity in the Central Apennines, occurred in the period 2009 – 2013, by analyzing seismogram recordings from two temporary networks of up to 17 stations in combination with data from three networks of permanent stations.
      237  270
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      190  261
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    IMAGING THE ACTIVE STRESS FIELD OF THREE SEISMOGENIC AREAS ALONG THE APENNINES AS REVEALED BY CRUSTAL ANISOTROPY

    During the last decades, the study of seismic anisotropy has provided useful information for the interpretation and evaluation of the stress field and active crustal deformation. Seismic anisotropy can yield valuable information on upper crustal structure, fracture field, and presence of fluid-saturated rocks crossed by shear waves. Several studies worldwide demonstrate that seismic anisotropy is related to stress-aligned, filled-fluid micro-cracks (EDA model). An automatic analysis code, “Anisomat+”, was developed, tested and improved to calculate the anisotropic parameters: fast polarization direction (φ) and delay time (∂t). Anisomat+ has been compared to other two automatic analysis codes (SPY and SHEBA) and tested on three zones of the Apennines (Val d’Agri, Tiber Valley and L’Aquila surroundings). The anisotropic parameters, resulting from the automatic computation, have been interpreted to determine the fracture field geometries; for each area, we defined the dominant fast direction and the intensity of the anisotropy, interpreting these results in the light of the geological and structural setting and of two anisotropic interpretative models, proposed in the literature. In the first one, proposed by Zinke and Zoback, the local stress field and cracks are aligned by tectonics phases and are not necessarily related to the presently active stress field. Therefore the anisotropic parameters variations are only space-dependent. In the second, EDA model, and its development in the APE model fluid-filled micro-cracks are aligned or ‘opened’ by the active stress field and the variation of the stress field might be related to the evolution of the pore pressure in time; therefore in this case the variation of the anisotropic parameters are both space- and time- dependent. We recognized that the average of fast directions, in the three selected areas, are oriented NW-SE, in agreement with the orientation of the active stress field, as suggested by the EDA model, but also, by the proposed by Zinke and Zoback model; in fact, NW-SE direction corresponds also to the strike of the main fault structures in the three study regions. The mean values of the magnitude of the normalized delay time range from 0.005 s/km to 0.007 s/km and to 0.009 s/km, respectively for the L'Aquila (AQU) area, the High Tiber Valley (ATF) and the Val d'Agri (VA), suggesting a 3-4% of crustal anisotropy. In each area are also examined the spatial and temporal distribution of anisotropic parameters, which lead to some innovative observations, listed below. 1) The higher values of normalized delay times have been observed in those zones where most of the seismic events occur. This aspect was further investigated, by evaluating the average seismic rate, in a time period, between years 2005 and 2010, longer than the lapse of time, analyzed in the anisotropic studies. This comparison has highlighted that the value of the normalised delay time is larger where the seismicity rate is higher. 2) In the Alto Tiberina Fault area the higher values of normalised delay time are not only related to the presence of a high seismicity rate but also to the presence of a tectonically doubled carbonate succession. Therefore, also the lithology, plays a important role in hosting and preserving the micro-fracture network responsible for the anisotropic field. 3) The observed temporal variations of anisotropic parameters, have been observed and related to the fluctuation of pore fluid pressure at depth possibly induced by different mechanisms in the different regions, for instance, changes in the water table level in Val D’Agri, occurrence of the April 6th Mw=6.1 earthquake in L’Aquila.Since these variations have been recognized, it is possible to affirm that the models that better fit the results, both in term of fast directions and of delay times, seems to be EDA and APE models.
      299  217
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Three-dimensional paganica fault morphology obtained from hypocenter clustering (L'Aquila 2009 seismic sequence, Central Italy)

    In seismic modelling, fault planes are normally assumed to be flat due to the lack of data which can constrain fault morphology. However, incorporating 3D fault morphology is important for modelling several phenomena, for example calculating mainshock induced stress changes. We utilize a data-analytical method to unveil the 3D rupture morphology of faults using unsupervised clustering techniques applied to earthquake hypocenters in seismic sequences. We apply this method to the 2009 L’Aquila seismic sequence which involved a MW 6.1 mainshock on April 6th. We use a dataset of about 50,000 relocated events, mostly microearthquakes, reaching magnitude of completeness equal to 0.7. Clustering distinguishes the earthquakes as occurring in three main clusters along with other minor fault segments. We then represent the morphology of the main Paganica fault system (responsible for the largest mainshock) using splines. This method shows promise as a step toward robustly and quickly obtaining 3D rupture morphologies where earthquake sequences have been monitored. The 3D model is presented interactively online, and the processing is presented in an interactive Jupyter Notebook (https://bit.ly/2MnCFdj).
      163  254
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Upper crustal structure, seismicity and pore pressure variations in an extensional seismic belt through 3‐D and 4‐D VP and VP/VS models: The example of the Val d’Agri area (southern Italy)

    (2011-07-15) ; ; ; ;
    Valoroso, L.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    We use local earthquake tomography and background seismicity to investigate static and transient features of the crustal velocity structure in the Val d’Agri (southern Apennines, Italy), one of the regions in central Mediterranean with the highest seismogenic potential. The upper crust is dominated by two broad high‐velocity anticlines of the buried Apulia Carbonate Platform ramping on two parallel high‐angle thrusts interpreted as preexisting inverted normal faults. The deep core of the anticlines consists of very high VP (up to 6.9 km/s) and low VP/VS rocks, suggesting the involvement of the Apulian crystalline basement in the Apennine belt. These results provide valuable constraints on the Apennine belt tectonic evolution, supporting a thick‐skinned interpretation for the Pliocene terminal phase of the compressional tectonics. The geometry of the Val d’Agri Quaternary basin is controlled by these inherited compressive features, whereas the presently active extensional tectonics barely reworked the structure. We find inconsistency between the structure of the Apulia Carbonate Platform and the location and geometry of the Quaternary normal faults mapped at the surface. This suggests either the immaturity of the normal faults or their secondary role in accommodating the extension. We observe spatiotemporal (4‐D) changes of VP and VP/VS models defining transient variations of pore fluid pressure in the upper crust. A strong change in the VP/VS ratio heralds a raise in the seismicity rate that can be related to large water level changes in a nearby artificial lake. This evidence is consistent with a mechanism of reservoir‐induced seismicity by fluid pressure increase and pore pressure diffusion. The 4‐D velocity variations are confined in the shallow portion of the upper crust (3–6 km depth) where fluids are stored in a highly fractured medium. Pore pressure fluctuations can affect the strength of fault segments, favoring seismicity rate changes along the active faults and possibly promoting large future earthquakes.
      179  26
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Crustal structure in the area of the 2002 Molise earthquake: Clues for the evolution of the southern Apennines

    The Apennines is a mountain belt with paired extension and compression that are explained by the subduction and delamination of the Ionian/Adria lithosphere. During the belt formation, the Adria crust is flexed downward and then incorporated into the wedge after peeling off along some weak level whose origin is still discussed. In southern Apennines, this process seems to have stopped at about 0.7 Ma by the development of a tear in the subducting lithosphere and consequent extension that spread along the mountain range. Seismological data acquired after the 2002 Mw 6.0 Molise strike‐slip earthquake yield modeling the structure of the Adria crust as congealed close to the leading edge of the belt. Tomography images show inverted normal faults within the sedimentary cover (Apulian units). Fault inversion, incomplete close to the compressional front, testifies for a final squeezing of the entire, previously flexed, Apulian continental margin. Pronounced high Vp and low Vp/Vs anomalies are observed at depth greater than 12 km and undoubtfully attributed to heterogeneities of the basement, solving the long‐lasting contention on the nature of similar high‐speed bodies observed beneath the Apennines. Beneath these bodies, we observe a strong reflectivity, suggesting the presence of a fluid‐filled layer in the middle lower crust that may act as a decoupling level in the Apennines tectonics. The deep fluids are also favoring the rupture of strike‐slip earthquakes, like those that occurred in 2002, and the intermediate‐depth seismicity diffused in the Apulian region.
      261  57
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The anatomy of the 2009 L’Aquila normal fault system (central Italy) imaged by high resolution foreshock and aftershock locations

    On 6 April (01:32 UTC) 2009 aMW 6.1 normal faulting earthquake struck the axial area of the Abruzzo region in central Italy. We study the geometry of fault segments using high resolution foreshock and aftershock locations. Two main SW dipping segments, the L’Aquila and Campotosto faults, forming an en echelon system 40 km long (NW trending). The 16 km long L’Aquila fault shows a planar geometry with constant dip (∼48°) through the entire upper crust down to 10 km depth. The Campotosto fault activated by three events with 5.0 ≤ MW ≤ 5.2 shows a striking listric geometry, composed by planar segments with different dips along depth rather than a smoothly curving single fault surface. The investigation of the spatiotemporal evolution of foreshock activity within the crustal volume where the subsequent L’Aquila main shock nucleated allows us to image the progressive activation of the main fault plane. From the beginning of 2009 the foreshocks activated the deepest portion of the fault until a week before the main shock, when the largest foreshock (MW 4.0) triggered a minor antithetic segment. Seismicity jumped back to the main plane a few hours before the main shock. Secondary synthetic and antithetic fault segments are present both on the hanging and footwall of the system. The stress tensor obtained by inverting focal mechanisms of the largest events reveals a NE trending extension and the majority of the aftershocks are kinematically consistent. Deviations from the dominant extensional strain pattern are observed for those earthquakes activating minor structures.
      279  31
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    RETRACE-3D project: a multidisciplinary collaboration to build a crustal model for the 2016-2018 central Italy seismic sequence

    The RETRACE-3D project (centRal italy EarThquakes integRAted Crustal model) focused on the revision of all the available geological and geophysical data in the area interested by the 2016-2018 seismic sequence of central Italy, with the final aim to reconstruct a reliable and consistent 3D geological model of that area. It is based on a collaboration, which was framed into a formal agreement, between Dipartimento della Protezione Civile (the Italian Civil Protection Department), Istituto di Geologia Ambientale e Geoingegneria, and Istituto per il Rilevamento Elettromagnetico of the Consiglio Nazionale delle Ricerche, Istituto Nazionale di Geofisica e Vulcanologia, and Istituto Superiore per la Protezione e la Ricerca Ambientale. The agreement purpose was to develop a project aimed at the geological and seismotectonic characterisation of the crustal volume hosting that seismic sequence. We present and discuss the approach, methodology and results of the project. The 3D geological model of the study area is developed in detail down to a depth of about 12 km, and extended to the Moho based on available regional-scale information. The model is available on the RETRACE-3D project website (www.retrace3d.it).
      3102  360
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Microseismic assessment and fault characterization at the Sulcis (South-Western Sardinia) field laboratory

    The general acceptance of the CO 2 geological storage by stakeholders passes through the assessment and mi- tigation of risks, potentially induced or increased by the disposal activity. Injection of moderate to large quantities of CO 2 in the sub-surface may unbalance local stress and trigger earthquakes if faults are critically stressed, condition that is not easily verifiable. Pilot sites are therefore the best way to proceed further in order to address such challenging issues. In such cases, the reconnaissance of faults and seismicity in the sub-surface, before the onset of activity, is mandatory. In this paper, we present studies carried out in the site where the Sotacarbo Fault Lab is going to be installed. This facility will be located in a very low seismic hazard region of central Mediterranean, where reports on historical large earthquakes are poor. We show results from a series of experiments aimed to monitor the background seismicity around the pilot site. As expected, seismicity is almost absent down to small magnitude close to the future injection-test well. Further seismic imaging of the sub- surface layers obtained by ambient noise tomography offers the ability to resolve the presence of a seismicity- free fault located in the first 200 m below the surface, of which the last episode of activity is difficult to assess. Our results encourage the use of this site to follow the response of the system to injection of small quantity of CO2.
      992  13
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Pore Pressure Pulse Drove the 2012 Emilia (Italy) Series of Earthquakes

    Pore Pressure Pulse Drove the 2012 Emilia (Italy)Series of EarthquakesGiuseppe Pezzo1, Pasquale De Gori1, Francesco Pio Lucente1, and Claudio Chiarabba11Istituto Nazionale di Geofisica e Vulcanologia, Rome, ItalyAbstractThe 2012 Emilia earthquakes sequence is thefirst debated case in Italy of destructive eventpossibly induced by anthropic activity. During this sequence, two main earthquakes occurred separated by9 days on contiguous thrust faults. Scientific commissions engaged by the Italian government reportedcomplementary scenarios on the potential trigger mechanism ascribable to exploitation of a nearby oilfield.In this study, we combine a refined geodetic source model constrained by precise aftershock locationsand an improved tomographic model of the area to define the geometrical relation between the activatedfaults and investigate possible triggering mechanisms. An aftershock decay rate that deviates from theclassical Omori-like pattern andVp/Vschanges along the fault system suggests that natural pore pressurepulse drove the space-time evolution of seismicity and the activation of the second main shock
      223  62