Skip to main content
The search returned 125 results
Now showing 1 - 10 of 125
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Rapid response seismic networks in Europe: the lesson learned from L’Aquila earthquake emergency.

    The largest dataset ever recorded during a normal fault seismic sequence was acquired during the 2009 seismic emergency triggered by the damaging earthquake in L'Aquila (Italy). This was possible through the coordination of different rapid-response seismic networks in Italy, France and Germany. A seismic network of more than 60 stations recorded up to 70,000 earthquakes. Here, we describe the different open-data archives where it is possible to find this unique set of data for studies related to hazard, seismotectonics and earthquake physics. Moreover, we briefly describe some immediate and direct applications of emergency seismic networks. At the same time, we note the absence of communication platforms between the different European networks. Rapid-response networks need to agree on common strategies for network operations. Hopefully, over the next few years, the European Rapid-Response Seismic Network will became a reality.
      1025  250
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The seismogenic thickness in Italy: constraints on potential magnitude and seismic hazard

    The thickness of the seismogenic layer is a key parameter for seismic hazard, since it can be used to constrain the maxi- mum depth of faulting and the potential magnitude. In this study, we compute the seismogenic thickness in the Italian region by defining the lower seismicity cut-off, using high- quality hypocentral locations of earthquakes that occurred in the past decade. Along the eastern Alps, the seismogenic thickness is about 12–14 km, laterally homogeneous along the entire south-verging thrust front. In the Apennines exten- sional belt, lateral changes in seismogenic thickness are evi- dent, and correlate with changes in the seismic energy released by past earthquakes. The potential magnitude is lar- ger in the southern Apennines where the seismogenic thick- ness is greater (16–18 km) than in the northern Apennines where it is less (6–10 km) and seismic energy is partially released by the creeping of faults
      51  3
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The 2012 Pianura Padana Emiliana seimic sequence: locations, moment tensors and magnitudes

    On May 20, 2012 (02:03:53 UTC), an MW 5.86 (ML 5.9) earthquake struck the Pianura Padana Emiliana region (northern Italy), causing five deaths and damage to several villages and to the towns of Ferrara and Modena. The main- shock was preceded, three hours earlier, by a MW 3.98 (ML 4.1) foreshock, which almost co-located with the main event. After the main event, the seismic sequence included six earthquakes with magnitudes >5.0. The biggest aftershock was located about 12 km west of the first mainshock, and was a MW 5.66 (ML 5.8) earthquake that occurred on May 29, 2012 (07:00:03 UTC); this can be considered as a second mainshock. After this event, the official death toll of the seis- mic sequence was 17 people. Moreover, there had been se- vere damage to the economy of the region and there were 13,000 homeless. This region is on the outer front of the northern Apen- nines, and it has been characterized by relatively low seismic hazard [Seismic Hazard Map of Italy - MPS04; MPS Working Group 2004]. In the three months preceding May 19, 2012, this area experienced a few events with maximum magnitude ML 2.9, and since 2005, this area has been characterized by relatively moderate seismicity, which has been mainly con- centrated along the Apennine front that delimits the south- ern Po Plain [ISIDe DataBase; Mele et al. 2007]. The last large historical earthquakes in the studied area were: the Novem- ber 17, 1570, MW 5.48 Ferrara event, and the March 17, 1574, event that produced damage in Finale Emilia (MW 4.72) [CPTI11 2011; Rovida et al. 2011]. The northern Apennines frontal thrust system is com- posed of a pile of NE-verging tectonic units that have devel- oped as a consequence of the Cenozoic collision between the European plate and the Adria plate [Boccaletti et al. 2011]. The geometries of the thrusts buried below the Po Plain sediments have been studied through seismic reflection profiles [Pieri and Groppi 1981, Ori and Friend 1984], and they show three major curved thrust fronts: the Monferrato, Emilia, and Ferrara-Romagna Arcs. Active NE-SW shorten- ing along the outer Apennines front has been documented by: global positioning system data, that show an average hor- izontal shortening of approximately 1 mm/y [Zerbini et al. 2006, Devoti et al. 2010]; borehole breakouts [Montone and Mariucci 1999, Montone et al. 2004]; and centroid moment tensor solutions [Pondrelli et al. 2006]. This activated fault system is elongated in the East-West direction (almost 50 km long), and centered on the village of Mirandola, the epicenter of the mainshock. In this study, we have analyzed data that arrived in real time at the Istituto Nazionale di Geofisica e Vulcanologia (INGV; National In- stitute of Geophysics and Volcanology) seismic monitoring center from permanent (Italian National Seismic Network; INSN) and temporary [Moretti et al. 2012, this volume] seis- mic stations, to describe the spatial and temporal evolution of the seismic sequence and the source parameters for earth- quakes with ML ≥4.0, and to perform an accurate study for ML calibration.
      832  205
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismic source identification of the 9 November 2022 Mw 5.5 offshore Adriatic sea (Italy) earthquake from GNSS data and aftershock relocation

    The fast individuation and modeling of faults responsible for large earthquakes are fundamental for understanding the evolution of potentially destructive seismic sequences. This is even more challenging in case of buried thrusts located in offshore areas, like those hosting the 9 November 2022 Ml 5.7 (Mw 5.5) and ML 5.2 earthquakes that nucleated along the Apennines compressional front, offshore the northern Adriatic Sea. Available on- and offshore (from hydrocarbon platforms) geodetic observations and seismological data provide robust constraints on the rupture of a 15 km long, ca. 24° SSW-dipping fault patch, consistent with seismic reflection data. Stress increase along unruptured portion of the activated thrust front suggests the potential activation of longer portions of the thrust with higher magnitude earthquake and larger surface faulting. This unpleasant scenario needs to be further investigated, also considering their tsunamigenic potential and possible impact on onshore and offshore human communities and infrastructures.
      64  47
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Esercitazione nazionale “Exe Sisma dello Stretto 2022” 04-06 novembre 2022. Rapporto di sintesi del Gruppo Operativo SISMIKO.

    Da venerdì 4 novembre a domenica 6 novembre 2022, si è tenuta una esercitazione nazionale denominata “Exe Sisma dello Stretto 2022” in un'area del territorio della Regione Calabria e della Regione Sicilia caratterizzata da una elevatissima pericolosità sismica. L’esercitazione è stata indetta e coordinata dal Dipartimento della Protezione Civile e aveva l’obiettivo di verificare la risposta operativa a un evento sismico significativo del Servizio Nazionale della Protezione Civile, di cui anche l’Istituto Nazionale di Geofisica e Vulcanologia fa parte. Durante le tre giornate, l’INGV ha avuto modo di testare tutte le procedure che l’Istituto ha codificato a partire da quelle del “Protocollo di Ente per le emergenze sismiche e da maremoto”. Dopo che INGV ha dato l’avvio all’intera esercitazione simulando il terremoto di magnitudo MW 6.2 (ML 6.0) alle ore 09:00 UTC in provincia di Reggio Calabria (5 km a SW dal comune di Laganadi), e ha, quindi, inviato il messaggio per il potenziale maremoto con un livello di allerta arancione; inoltre, il Presidente INGV ha prontamente convocato l’Unità di Crisi e attivato tutti Gruppi Operativi. Questi ultimi, nell’ambito dello scenario esercitativo, hanno verificato che i flussi di comunicazione interna e tutte le attività necessarie in emergenza sismica, presenti nei relativi protocolli operativi, risultassero rispettati. L’obiettivo primario dell’esercitazione è stato quindi quello di validare le attività previste e di aggiornare il personale afferente ai Gruppi Operativi stessi. Tra di essi, SISMIKO, che rappresenta il GO dedicato al coordinamento delle reti sismiche mobili INGV in emergenza, nelle settimane precedenti l’esercitazione ha predisposto tutte le attività che intendeva testare, descrivendole brevemente nel Documento d’impianto INGV e con maggior dettaglio in quello del Gruppo Operativo. A pochi giorni dalla chiusura dell’esercitazione, un terremoto di magnitudo ML 5.7 (MW 5.5) registrato alle ore 06:07 UTC del 09 novembre 2022 ha spostato l’attenzione dalla simulazione alla realtà.
      452  262
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Dyke intrusion and stress-induced collapse of volcano flanks: The example of the 2018 event at Mt. Etna (Sicily, Italy)

    Magmatic intrusions, eruptions and flank collapses are frequent processes of volcano dynamics, inter-connected at different space and time scales. The December 2018 recrudescent episode at Mt. Etna is an exemplary case where a sudden intrusive event culminated with a short eruption, intense seismicity and a shallow large strike-slip earthquake at the edge of the eastern sliding flank. Here, we show that high resolution velocity models and transient changes of VP and VP/VS resolve the magma intrusion through a dyke and local stress increase at the base of the unstable flank, inducing the collapse. Episodic brittle faulting occurs at the edge of the sliding sector, locally contributed by high fluid pressure. The feedback between magma ascent, stress changes and flank collapse is driving the volcano dynamics, with processes ranging from long term to transient episodes.
      231  172
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Velocity and attenuation tomography of the Umbria Marche 1997 fault system: Evidence of a fluid-governed seismic sequence

    (2009-10-15) ; ; ;
    Chiarabba, C.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    ;
    De Gori, P.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, Italia
    The 1997 Umbria Marche is probably the best ever monitored normal faulting seismic sequence. Seismicity migration and multiple main shocks characterize the activation of a 40-km-long system of contiguous fault segments, as documented by seismological data. Many authors as indicative of fault weakening by fluids migration have interpreted this behaviour. In this study, we create a new catalogue of high quality P- and S-wave arrival times merging data recorded by permanent and temporary stations to improve the resolution of velocity and attenuation models and earthquake locations. We show that the relocated earthquakes and the joint interpretation of P- and S-wave velocity and attenuation models help in understanding the faulting processes, revealing new details of the geometry of the main faults and physical state of fluids within the crustal volume. We observe that large aftershocks occur on the top and within the Triassic evaporitic layer, a rock volume locally characterised by fluid over-pressured, as evidenced by high VP/VS and low QP/QS anomalies. Velocity and attenuation heterogeneities are evidence that the migration of fluid pressure along the fault system is the driving mechanism of the prolonged earthquake sequence.
      153  33
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismic measurements to reveal short-­term variations in the elastic properties of the Earth crust

    Since the late the late ’60s-early ’70s era seismologists started developed theories that included variations of the elastic property of the Earth crust and the state of stress and its evolution crust prior to the occurrence of a large earthquake. Among the others the theory of the dilatancy (Scholz et al., 1973): when a rock is subject to stress, the rock grains are shifted generating micro-cracks, thus the rock itself in- creases its volume. Inside the fractured rock, fluid saturation and pore pressure play an important role in earthquake nucleation, by modulating the effective stress. Thus measuring the variations of wave speed and of anisotropic parameter in time can be highly informative on how the stress leading to a major fault failure builds up. In 80s and 90s such kind of research on earthquake precursor slowed down and the priority was given to seismic hazard and ground motions studies, which are very important since these are the basis for the building codes in many countries. Today we have dense and sophisticated seismic networks to measure wave-fields characteristics: we archive continuous waveform data recorded at three components broad-band seismometers, we almost routinely obtain high resolution earthquake locations. Therefore we are ready to start to systematically look at seismic-wave propagation properties to possibly reveal short-term variations in the elastic properties of the Earth crust. In active fault areas and volcanoes, tectonic stress variation influences fracture field orientation and fluid migration processes, whose evolution with time can be monitored through the measurement of the anisotropic parameters (Piccinini et al., 2006) and of the relative velocity variations through the ambient seismic noise cross-correlation analysis (Campillo, 2006). Through the study of S waves anisotropy it is therefore potentially possible to measure the presence, migration and state of the fluid in the rock traveled by seismic waves, thus providing a valuable route to understanding the seismogenic phenomena and their precursors (Crampin & Gao, 2010). Variations of anisotropic parameter and of the ratio between the compressional (P-wave) and the shear (S-wave) seismic velocities, the Vp/Vs (Nur, 1972) have been recently observed and measured during the preparatory phase of a major earthquake (Lucente et al. 2010). The seismic noise cross-correlation analysis has shown remarkable results in studying strong earthquakes (Brenguier et al., 2008). The sudden decrease of relative velocity variations occurring at the same time of the mainshock has been interpreted as due to the modification of the coseismic stress field (Zaccarelli et al., 2011). This study has been developed by the Research Unit 2 inside the “INGV-DPC S3-Project 2012-2013: Short term earthquake prediction and preparation”. The RU 2 is composed by two Work Packages (WP1 and WP2), aimed to study the variations of seismic waves velocities using different techniques: the cross-correlation of seismic noise (WP1) in the area Po Plain before and after the 2012 Emilia seismic sequence, and as well as the seismic activity of the last few years in the Pollino region (southern Apennines) and the anisotropy of S waves (WP2) to all events recorded during the ongoing seismic sequence in the Pollino area and to compare their temporal trends to other seismic observable as the ratio Vp / Vs.
      229  213
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Deterministic 3D Ground-Motion Simulations (0–5 Hz) and Surface Topography Effects of the 30 October 2016 Mw 6.5 Norcia, Italy, Earthquake

    TheMw6.5 Norcia, Italy, earthquake occurred on 30 October 2016 and caused extensive damage to buildings in the epicentral area. The earthquake was recorded by a network of strong-motion stations, including 14 stations located within a 5 km distance from the two causative faults. We used a numerical approach for generating seismic waves from two-hybrid deterministic and stochastic kinematic fault rupture models propagating through a 3D Earth model derived from seismic tomography and local geology. The broadband simulations were performed in the 0–5 Hz frequency range using a physics-based deterministic approach modeling the earthquake rupture and elastic wave propagation. We used SW4, a finite-difference code that uses a conforming curvilinear mesh, designed to model surface topography with high numerical accuracy. The simulations reproduce the amplitude and duration of observed near-fault ground motions. Our results also suggest that due to the local fault-slip pattern and upward rupture directivity, the spatial pattern of the horizontal near-fault ground motion generated during the earthquake was complex and characterized by several local minima and maxima. Some of these local ground-motion maxima in the near-fault region were not observed because of the sparse station coverage. The simulated peak ground velocity (PGV) is higher than both the recorded PGV and predicted PGV based on empirical models for several areas located above the fault planes. Ground motions calculated with and without surface topography indicate that, on average, the local topography amplifies the ground-motion velocity by30%. There is a correlation between the PGV and local topography, with the PGV being higher at hilltops. In contrast, spatial variations of simulated PGA do not correlate with the surface topography. Simulated ground motions are important for seismic hazard and engineering assessments for areas that lack seismic station coverage and historicalrecordings from large damaging earthquakes.
      459  163
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Characterizing the subsurface structure and active faults of the Fucino Basin (Central Apennines) through integrated high-resolution seismic reflection and nodal ambient noise surveys

    (Lausann : Frontiers Media S.A., 2013-, 2026-03-24) ; ; ; ;
    The Fucino Basin, the largest tectonic basin within the Central Apennines orogen, is bounded by normal faults that have controlled the deposition of over 1 km of Pliocene-Quaternary continental deposits above a Messinian substratum. Conflicting interpretations from legacy seismic profiles have hindered a full understanding of the basin’s stratigraphy, age, evolution, and fault systems, creating uncertainties for tectonic reconstructions, seismic response analysis and hazard assessment. To resolve these uncertainties, we acquired new high-resolution datasets through three complementary active–passive seismic surveys. These include seismic reflection profiles covering ∼10 km, a nodal ambient noise campaign deploying 258 short-period nodes over 16 km2, preceded by two pilot array tests, and finally a basin-wide ambient noise survey comprising 1-hour recordings at 42 sites. Our analysis focused on the San Benedetto and Trasacco Faults—responsible for the 1915, M7.1, Marsica earthquake—and the main depocenter (the Bacinetto) associated with the San Benedetto Fault. This paper presents experimental setup, recorded data, and initial findings that provide new insights into basin stratigraphy, fault geometry, and spatial distribution of the fundamental resonance frequency (f0). The seismic reflection data show excellent imaging quality, resolution, and penetration exceeding 1 km. The Bacinetto hosts up to 850–900 m of continuous lacustrine succession and lower fluvio-lacustrine deposits that record sustained syn-sedimentary slip along the San Benedetto Fault from the Late Pliocene to Recent times. No evidence is found for significant synthetic or antithetic faulting beneath the depocenter, contradicting earlier structural models. The intra-basin Trasacco Fault forms a clear basement step and localized sediment thickening that tapers northwestward f0 varies from 1 to 2 Hz near the basin margins to ∼0.2 Hz in the Bacinetto, reflecting progressive sediment thickening, whereas it varies abruptly across fault zones. f0 estimates from nodal and station data show good consistency.
      19  17