Cattaneo, Marco
Preferred name
Cattaneo, Marco
Email
marco.cattaneo@ingv.it
Staff
staff
ORCID
82 results
Filters
Settings
The search returned 82 results
Now showing 1 - 10 of 82
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Lithospheric double shear zone unveiled by microseismicity in a region of slow deformation
(2022-12-06); ; ; ; The deformation style of the continental lithosphere is a relevant issue for geodynamics and seismic hazard perspectives. Here we show the first evidence of two well-distinct low-angle and SW-dipping individual reverse shear zones of the Italian Outer Thrust System in Central Italy. One corresponds to the down-dip prosecution of the Adriatic Basal Thrust with its major splay and the other to a hidden independent structure, illuminated at a depth between 25 and 60 km, for an along-strike extent of ~ 150 km. Combining geological information with high-quality seismological data, we unveil this novel configuration and reconstruct a detailed 3D geometric and kinematic fault model of the compressional system, active at upper crust to upper mantle depths. In addition, we report evidence of coexisting deformation volumes undergoing well-distinguished stress fields at different lithospheric depths. These results provide fundamental constraints for a forthcoming discussion on the Apennine fold-and-thrust system's geodynamic context as a shallow subduction zone or an intra-continental lithosphere shear zone.50 47 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A comprehensive suite of earthquake catalogues for the 2016-2017 Central Italy seismic sequence
(2022-11-18); ; ; ; The protracted nature of the 2016-2017 central Italy seismic sequence, with multiple damaging earthquakes spaced over months, presented serious challenges for the duty seismologists and emergency managers as they assimilated the growing sequence to advise the local population. Uncertainty concerning where and when it was safe to occupy vulnerable structures highlighted the need for timely delivery of scientifically based understanding of the evolving hazard and risk. Seismic hazard assessment during complex sequences depends critically on up-to-date earthquake catalogues-i.e., data on locations, magnitudes, and activity of earthquakes-to characterize the ongoing seismicity and fuel earthquake forecasting models. Here we document six earthquake catalogues of this sequence that were developed using a variety of methods. The catalogues possess different levels of resolution and completeness resulting from progressive enhancements in the data availability, detection sensitivity, and hypocentral location accuracy. The catalogues range from real-time to advanced machine-learning procedures and highlight both the promises as well as the challenges of implementing advanced workflows in an operational environment.372 128 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Evaluation of the Event Detection Level of the Cuban Seismic Network
The detection level of a seismic network is a measure of its effective ability to record small earthquakes in a given area. It can vary in both space and time and depends on several factors such as meteorological conditions, anthropic noise, local soil conditions—all factors that affect the seismic noise level—as well as the quality and operating condition of the instruments. The ability to estimate the level of detection is of tremendous importance both in the design of a new network and in determining whether a given network can recognize seismicity consistently or needs to be improved in some of its parts. In this article, we determine the detection level of the Cuban seismic network using the empirically estimated seismic noise spectral level at each station site and some theoretical relationships to predict the signal amplitude of a seismic event at individual stations. The minimum local detectable magnitude thus depends on some network parameters such as the signal‐to‐noise ratio and the number of stations used in the calculation. We also demonstrate the effectiveness of our predictions by comparing the estimated detection level with those empirically determined from one year of data (i.e., the year 2020) of the Cuban seismic catalog. Our analysis shows, on the one hand, in which areas the current Cuban network should be improved, also depending on the regional pattern of faults, and, on the other hand, indicates the magnitude threshold that can be assumed homogeneously for the catalog of Cuban earthquakes in 2020. Because the adopted method can use current measurements of the seismic noise level (e.g., daily), the proposed analysis can also be configured for continuous monitoring of network state quality.181 181 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Seismic Surveillance and Earthquake Monitoring in Italy
(2021-03-03); ; ; ; The Istituto Nazionale di Geofisica e Vulcanologia (INGV) is an Italian research institution with focus on earth sciences. Moreover, the INGV is the operational center for seismic surveillance and earthquake monitoring in Italy and is a part of the civil protection system as a center of expertise on seismic, volcanic, and tsunami risks.INGV operates the Italian National Seismic Network and other networks at national scale and is a primary node of the European Integrated Data Archive for archiving and distributing strong‐motion and weak‐motion seismic recordings. In the control room in Rome, INGV staff performs seismic surveillance and tsunami warning services; in Catania and Naples, the control rooms are devoted to volcanic surveillance. Volcano monitoring includes locating earthquakes in the regions around the Sicilian (Etna, Eolian Islands, and Pantelleria) and the Campanian (Vesuvius, Campi Fregrei, and Ischia) active volcanoes. The tsunami warning is based on earthquake location and magnitude (M) evaluation for moderate to large events in the Mediterranean region and also around the world. The technologists of the institute tuned the data acquisition system to accomplish, in near real time, automatic earthquake detection, hypocenter and magnitude determination, and evaluation of several seismological products (e.g., moment tensors and ShakeMaps). Database archiving of all parametric results is closely linked to the existing procedures of the INGV seismic surveillance environment and surveillance procedures. Earthquake information is routinely revised by the analysts of the Italian seismic bulletin. INGV provides earthquake information to the Department of Civil Protection (Dipartimento di Protezione Civile) to the scientific community and to the public through the web and social media. We aim at illustrating different aspects of earthquake monitoring at INGV: (1) network operations; (2) organizational structure and the hardware and software used; and (3) communication, including recent developments and planned improvements.5637 415 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Implementation of a seismic monitoring network of relevant and strategic public buildings in the Marche region (Italy)
A seismic monitoring infrastructure for relevant and strategic public buildings has been developed thanks to the agreement between the National Institute of Geophysics and Volcanology (INGV) and Marche Region. The project was founded by European projects for the assessment of seismic risk for strategic public buildings, prevention and monitoring - European Territorial Cooperation Project Holistic (EU IPA-Adriatic) and READINESS (INTERREG Italy-Croatia). The project was born by taking advantage of the presence of MEMS accelerometers installed at the base of municipal buildings. The project aims to implement low-cost technologies and non-invasive methods to extend the seismic monitoring of the sites where the structures are located and characterize the seismic action in correspondence of them with a rapid estimate of the damage through relationships between acceleration and macroseismic intensity or fragility curves and construction features. Among the various activities, environmental seismic noise measurements were carried to investigate the fundamental vibration of the structures and soils, semi-automatic procedures were developed for the calculation of the strong motion parameters of seismic events and a web portal was implemented for the collection and rapid dissemination of information to local Civil Protection. An important part of the activities concerned the testing of new MEMS accelerometers through collaboration with the Polytechnic University of Marche (UNIVPM) and the headquarter of the Osservatorio Nazionale Terremoti (ONT) in Palermo. Moreover, new monitoring sites are being prepared in some municipalities affected by the 2016 seismic sequence. Since the beginning of the project, the strong motion parameters relating to 95 seismic events of magnitude greater than 3 and with ground motion accelerations greater than or equal to 0.001 g have been stored in the database.344 157 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , An automatically generated high-resolution earthquake catalogue for the 2016–2017 Central Italy seismic sequence, including P and S phase arrival times
The 2016–17 central Italy earthquake sequence began with the first mainshock near the town of Amatrice on August 24 (MW 6.0), and was followed by two subsequent large events near Visso on October 26 (MW 5.9) and Norcia on October 30 (MW 6.5), plus a cluster of 4 events with MW > 5.0 within few hours on January 18, 2017. The affected area had been monitored before the sequence started by the permanent Italian National Seismic Network (RSNC), and was enhanced during the sequence by temporary stations deployed by the National Institute of Geophysics and Volcanology and the British Geological Survey. By the middle of September, there was a dense network of 155 stations, with a mean separation in the epicentral area of 6–10 km, comparable to the most likely earthquake depth range in the region. This network configuration was kept stable for an entire year, producing 2.5 TB of continuous waveform recordings. Here we describe how this data was used to develop a large and comprehensive earthquake catalogue using the Complete Automatic Seismic Processor (CASP) procedure. This procedure detected more than 450,000 events in the year following the first mainshock, and determined their phase arrival times through an advanced picker engine (RSNI-Picker2), producing a set of about 7 million P- and 10 million S-wave arrival times. These were then used to locate the events using a non-linear location (NLL) algorithm, a 1D velocity model calibrated for the area, and station corrections and then to compute their local magnitudes (ML). The procedure was validated by comparison of the derived data for phase picks and earthquake parameters with a handpicked reference catalogue (hereinafter referred to as ‘RefCat’). The automated procedure takes less than 12 hours on an Intel Core-i7 workstation to analyse the primary waveform data and to detect and locate 3000 events on the most seismically active day of the sequence. This proves the concept that the CASP algorithm can provide effectively real-time data for input into daily operational earthquake forecasts, The results show that there have been significant improvements compared to RefCat obtained in the same period using manual phase picks. The number of detected and located events is higher (from 84,401 to 450,000), the magnitude of completeness is lower (from ML 1.4 to 0.6), and also the number of phase picks is greater with an average number of 72 picked arrival for a ML = 1.4 compared with 30 phases for RefCat using manual phase picking. These propagate into formal uncertainties of ± 0.9km in epicentral location and ± 1.5km in depth for the enhanced catalogue for the vast majority of the events. Together, these provide a significant improvement in the resolution of fine structures such as local planar structures and clusters, in particular the identification of shallow events occurring in parts of the crust previously thought to be inactive. The lower completeness magnitude provides a rich data set for development and testing of analysis techniques of seismic sequences evolution, including real-time, operational monitoring of b-value, time-dependent hazard evaluation and aftershock forecasting.254 180 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Feasibility Study of an Earthquake Early Warning System in Eastern Central Italy
An earthquake early warning system (EEWS) is a monitoring infrastructure that allows alerting strategic points (targets) before the arrival of strong shaking waves during an earthquake. In a region like Central Italy, struck by recent and historical destructive earthquakes, the assessment of implementation of an EEWS is a significant challenge due to the proximity of seismic sources to many potential targets, such as historical towns, industrial plants, and hospitals. In order to understand the feasibility of an EEWS in such an area, we developed an original method of event declaration simulation (EDS), a tool for assessing the effectiveness of an EEWS for existing seismic networks, improving them with new stations, and designing new networks for EEW applications. Values of the time first alert (TFA), blind zone radius (BZ), and lead time (LT) have been estimated with respect to selected targets for different network configurations in the study region. Starting from virtual sources homogeneously arranged on regular mesh grids, the alert response was evaluated for actual and improved seismic networks operating in the area, taking into account the effects of the transmission and acquisition systems. In the procedure, the arrival times of the P wave picks, the association binder, the transmission latencies, and the computation times were used to simulate the configuration of PRESTo EEWS, simulating both real-time and playback elaborations of real earthquakes. The NLLOC software was used to estimate P and S arrival times, with a local velocity model also implemented in the PRESTo EEWS. Our results show that, although Italy’s main seismic sources are located close to urban areas, the lead times calculated with the EDS procedure, applied to actual and to improved seismic networks, encourage the implementation of EEWS in the study area. Considering actual delays due to data transmission and computation time, lead times of 5–10 s were obtained simulating real historical events striking some important targets of the region. We conclude that EEWSs are useful tools that can contribute to protecting people from the harmful effects of earthquakes in Italy.568 148 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Seismic velocity precursors to the 2016 Mw 6.5 Norcia (Italy) earthquake
Earthquakes occur as the result of long-term strain accumulation on active faults and com- plex transient triggering mechanisms. Although laboratory experiments show accelerating deformation patterns before failure conditions are met, imaging similar preparatory phases in nature remains difficult because it requires dense monitoring in advance. The 2016 Amatrice- Visso-Norcia (central Italy) earthquake cascade, captured by an unprecedented seismic network, provided a unique testing ground to image the preparatory phase of a large event. The crustal volume of the Norcia incipient fault was densely illuminated by seismic rays from more than 13,000 earthquakes that occurred within the 3 mo before the main shock nucleation. We per- formed seismic tomography in distinct time windows that revealed the precursory changes of elastic wave speed, signaling (1) the final locked state of the fault, and (2) the rapid fault-stiffness alterations near the hypocenter just a few weeks before the event. The results are the first instance where short-lived, hard-to-catch crustal properties shed light on evolving earthquake cascades.113 3 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Large Earthquakes Driven by Fluid Overpressure: The Apennines Normal Faulting System Case
Fluid overpressure is a primary mechanism behind fault interaction and earthquakes triggering. The Apennines section within the young Alpine mobile belt is a key locus to investigate the interplay between fluids and faults. Here, seismicity develops along the extending mountain belt and the key role of fluids has been invoked in past large earthquake sequences. In this study, we use seismological data to get improved images of the Apennines normal faulting system, trying to catch evidences for the involvement of fluids in the preparatory phase of large earthquakes. We observe that extension preferentially reutilizes inherited fragments of faults which were assembled during the Mio‐Pliocene contraction, with steep segments that floor on a regional‐scale gently east dipping plane. We find evidences for wide volumes of overpressured fluids at the base of the seismogenic layer, which are connected to the activation of the recent large earthquakes. The recognition of fluids compartments with overpressuring and diffusion molding seismicity is a key to understand faulting processes and possibly develop forecasts scenarios.193 70 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The Italian Earthquakes and Tsunami Monitoring and Surveillance Systems
(2019-07-16); ; ; ; The Osservatorio Nazionale Terremoti (ONT) is the Italian seismic operational centre for monitoring earthquake, it is part of Istituto Nazionale di Geofisica e Vulcanologia (INGV) the largest Italian research institution, with focus in Earth Sciences. INGV runs the Italian National Seismic Network (network code IV) and other networks at national scale for monitoring earthquakes and tsunami. INGV is a primary node of European Integrated Data Archive (EIDA) for archiving and distributing, continuous, quality checked seismic waveforms (strong motion and weak motion recordings). ONT designed the data acquisition system to accomplish, in near-real-time, automatic earthquake detection, hypocentre and magnitude determination and evaluation of moment tensors, shake maps and other products. Database archiving of all parametric results are closely linked to the existing procedures of the INGV seismic monitoring environment and surveillance procedures. ONT organize the Italian earthquake surveillance service and the tsunami alert service (INGV is Tsunami Service Provider of the ICG/NEAM for the entire Mediterranean basin). We provide information to the Dipartimento di Protezione Civile (DPC) and to several Mediterranean countries. Earthquakes information are revised routinely by the analysts of the Italian Seismic Bulletin. The results are published on the web and are available to the scientific community and the general public.249 124
