Scafidi, Davide
Preferred name
Scafidi, Davide
24 results
Filters
Settings
The search returned 24 results
Now showing 1 - 10 of 24
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Seismogenic zonation as a branch of the logic tree for the new Italian seismic hazard map - MPS16: a preliminary outline
(2017-12-15); ; ; ; The zonation presented in this study has been developed with the aim of applying it as a branch of the logic tree that will be used for the new Italian seismic hazard map, presently in preparation according to the approach of seismotectonic probabilism. With respect to the zonation used for the present official seismic hazard map of Italy, the zonation proposed here considers narrower sources and is based on new and updated seismological data. In particular, some new seismogenic zones are proposed here, introducing areas that were not considered seismogenic until now (e.g., the narrow sources characterised by the presence of transform faults which are almost normal to the trend of the northern Apennines). The preliminary seismic hazard estimates produced with this new zonation aim to identify possible problems that the zonation introduces in the seismicity characterization of the seismogenic zones. As the present seismic hazard assessment was computed by considering a different attenuation model with respect to the one applied for the previous national seismic hazard maps, a re-elaboration of the most recent map referring to Italy has been developed: the comparison of the two maps is a good indicator of the areas where additional seismological investigation is needed to support the zonation presented here. In particular, some zones are not adequately documented with regard to seismicity and a different computation of the seismicity rates is suggested.161 221 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Reliability of the automatic procedures for locating earthquakes in southwestern Alps and northern Apennines (Italy)
Reliable automatic procedure for locating earthquake in quasi-real time is strongly needed for seismic warning system, earthquake preparedness, and producing shaking maps. The reliability of an automatic location algorithm is influenced by several factors such as errors in picking seismic phases, network geometry, and velocity model uncertainties. The main purpose of this work is to investigate the performances of different automatic procedures to choose the most suitable one to be applied for the quasi-real-time earthquake locations in northwestern Italy. The reliability of two automatic-picking algorithms (one based on the Characteristic Function (CF) analysis, CF picker, and the other one based on the Akaike Information Criterion (AIC), AIC picker) and two location methods (“Hypoellipse” and “NonLinLoc” codes) is analysed by comparing the automatically determined hypocentral coordinates with reference ones. Reference locations are computed by the “Hypoellipse” code considering manually revised data and tested using quarry blasts. The comparison is made on a dataset composed by 575 seismic events for the period 2000–2007 as recorded by the Regional Seismic network of Northwestern Italy. For P phases, similar results, in terms of both amount of detected picks and magnitude of travel time differences with respect to manual picks, are obtained applying the AIC and the CF picker; on the contrary, for S phases, the AIC picker seems to provide a significant greater number of readings than the CF picker. Furthermore, the “NonLin- Loc” software (applied to a 3D velocity model) is proved to be more reliable than the “Hypoellipse” code (applied to layered 1D velocity models), leading to more reliable automatic locations also when outliers (wrong picks) are present.130 2 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 30 years of seismicity in the south-western Alps and northern Apennines as recorded by the Regional Seismic Network of northwestern Italy
The aim of this work is to describe the seismicity of the South-western Alps and Northern Apennines from the very detailed picture provided by thirty years of operation of the Regional Seismic Network of northwestern Italy .290 521 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The RAMONES Service for Rapid Assessment of Seismic Moment and Radiated Energy in Central Italy: Concepts, Capabilities, and Future Perspectives
(2021-03-31); ; ; ; We present Rapid Assessment of MOmeNt and Energy Service (RAMONES), a service for disseminating through a web interface, the estimates of seismic moment (M0) and radiated energy (ER) for earthquakes occurring in central Italy with local magnitudes above 1.7. The service is based on a fully‐automatic procedure developed for downloading and processing open seismological data from the European Integrated Data Archive, Italian Civil Protection repository, and Incorporated Research Institutions for Seismology (IRIS). In its actual configuration, RAMONES uses the seismic catalog generated through the event webservice of the Italian Institute of Geophysics and Volcanology (compliant with International Federation of Digital Seismograph Networks standards) to guide the data download. The concept of RAMONES is to estimate M0 and ER from features extracted directly from recordings, namely the S‐wave peak displacement (PDS) and the integral of the squared velocity (IV2S) evaluated over the S‐wave window at local distances. A data set composed of 6515 earthquakes recorded in central Italy between 2008 and 2018 was used to calibrate the attenuation models relating M0 to PDS and ER to IV2S, including station corrections. The calibration values for M0 and ER were extracted from the source spectra obtained by applying a decomposition approach to the Fourier amplitude spectra known as the generalized inversion technique. To test the capabilities of RAMONES, we validate the attenuation models by performing residual analysis over about 60 earthquakes occurring in 2019 that were used for the spectral decomposition analysis but not considered in the calibration phase. Since January 2020, a testing operational phase has been running, and RAMONES has analyzed about 800 earthquakes by September 2020. The distribution of the source parameters and their relevant scaling relationships are automatically computed and disseminated in the form of maps, parametric tables, figures, and reports available through the RAMONES web interface.96 295 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Earthquake Rupture Forecasts for the MPS19 Seismic Hazard Model of Italy
In recent years, new approaches for developing earthquake rupture forecasts (ERFs) have been proposed to be used as an input for probabilistic seismic hazard assessment (PSHA). Zone- based approaches with seismicity rates derived from earthquake catalogs are commonly used in many countries as the standard for national seismic hazard models. In Italy, a single zone- based ERF is currently the basis for the official seismic hazard model. In this contribution, we present eleven new ERFs, including five zone-based, two smoothed seismicity-based, two fault- based, and two geodetic-based, used for a new PSH model in Italy. The ERFs were tested against observed seismicity and were subject to an elicitation procedure by a panel of PSHA experts to verify the scientific robustness and consistency of the forecasts with respect to the observations. Tests and elicitation were finalized to weight the ERFs. The results show a good response to the new inputs to observed seismicity in the last few centuries. The entire approach was a first attempt to build a community-based set of ERFs for an Italian PSHA model. The project involved a large number of seismic hazard practitioners, with their knowledge and experience, and the development of different models to capture and explore a large range of epistemic uncertainties in building ERFs, and represents an important step forward for the new national seismic hazard model.3092 170 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Il terremoto del 21 giugno 2013 in Lunigiana. Le attività del coordinamento Sismiko
(2014-02-03); ; ; ; Il 21 giugno 2013 alle ore 10.33 UTC è stato registrato dalla Rete Sismica Nazionale (RSN) [Amato e Mele, 2008; Delladio, 2011] dell’Istituto Nazionale di Geofisica e Vulcanologia (INGV) un terremoto di magnitudo (ML) 5.2 nel distretto sismico1 denominato “Alpi Apuane” tra i comuni di Minucciano in provincia di Lucca e Fivizzano e Casola in provincia di Massa e Carrara, zona conosciuta come “Lunigiana”. L’evento sismico, localizzato dai sismologi in turno presso la sala di sorveglianza sismica di Roma [Basili, 2011] con coordinate 44.153°N e 10.135° E e una profondità di circa 5 km è stato ben risentito in tutta la penisola centro-settentrionale ed è stato seguito in poche ore da numerosi eventi anche di ML ≥ 3.0 (16 nelle prime 72 ore). Storicamente l’area oggetto della sequenza sismica è stata interessata da numerosi terremoti di magnitudo superiore a 5.0 il più grande dei quali quello avvenuto nel 1920 nella zona della Garfagnana (fonte dati: Catalogo Parametrico dei Terremoti Italiani - CPTI11 [Rovida et al., 2011]), ad una distanza di circa 12 km dal mainshock odierno, interessata anch’essa da una piccola sequenza sismica a gennaio del 2013. In considerazione dell’entità dell’evento e seguendo le procedure definite per le situazioni di emergenza internamente all’INGV anche in accordo con l’Allegato A2 della Convenzione vigente 2012- 20203 fra l’ente e il Dipartimento di Protezione Civile (DPC), è stata attivata la Rete Sismica Mobile della sede INGV di Roma (Re.Mo. [Moretti et al., 2010]). Nell’arco di tempo di poco più un’ora dall’accadimento del mainshock è stata disposta l’installazione di una rete sismica temporanea costituita da sei stazioni a integrazione delle reti sismiche permanenti già presenti in area epicentrale (RSN e Regional Seismic network of North-Western Italy – RSNI [Ferretti et al., 2008; 2010; Eva et al., 2010; Pasta et al., 2011]). Nel contempo sono stati consultati tramite e-mail i referenti delle unità di rete sismica mobile delle altre sedi INGV che nell’ambito del coordinamento “Sismiko” [Moretti et al., 2012] negli ultimi due anni hanno dato la propria disponibilità, in termini di personale e strumentazione, ad intervenire in caso di emergenza sismica; sono stati inoltre contattati i colleghi del Dipartimento di Scienze della Terra, dell’Ambiente e della Vita, dell’Università degli Studi di Genova (DISTAV) i più vicini all’area epicentrale e gestori della RSNI che hanno comunicato loro stessi l’intenzione di installare due stazioni temporanee, una in real-time e una in configurazione stand-alone. In questo lavoro viene descritta l’attività compiuta dalla Rete Sismica Mobile INGV, la tempistica dell’intervento effettuato in sinergia con i colleghi dell’Università di Genova, i dettagli circa l'installazione e la gestione delle stazioni sismiche temporanee nel primo mese di attività e una valutazione del dataset acquisito.1261 286 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Verso una migliore conoscenza delle strutture del margine Ligure: il progetto GROSMARIN
(2008); ; ; ; (English Abstract) The Ligurian margin, that is the junction area located between the Ligurian basin and the Southwestern Alps, is a passive margin, seismically active and subjected to gravitative movements. The active deformation in this sector is among the strongest ever experienced in Western Italy and Southern France. The current geodynamics of the basin is not completely understood yet, and somewhat under interest and debate of the scientific community. The latest results on the recent evolution of the Alps-Mediterranean system suggest that the area under study lay close to a domain under extension. The interest for the area is reinforced by its seismic activity that, although of low to moderate energy, acts in an area of high vulnerability. Some historical events involved in fact dramatic social and material damages. The growth of population (that now accounts for more than 2.500.000 inhabitants between Cannes and Genoa), the setting of numerous industries and the tourist business of the area are additional motivation for monitoring the area from the seismic point of view and especially to make specific studies on the seismogenic structures of this sector. Events with magnitude greater than 4.5 to 5.0 are in fact recorded every 5 years, but the area undergoes a rather weak microseismicity that often remains undetected and always poorly located by land seismic networks. The natural risks associated to this sector cannot neglect the presence of steep canyons that incise the offshore margin and favour gravitative slopes. The sediment masses accumulate on top of these canyons and may slip even after an earthquake of moderate magnitude. The GROSMARIN (which stands for GrandROSMARIN) cruise is proposed by UMR Géosciences Azur (with fellow french and italian research groups). It aims at (1) studying the microseismicity along a part of the northern margin of the Ligurian Basin, offshore France and Italy and (2) to realise a 3D tomography by wide-angle seismics. The goal is to better characterize active structures along this zone and to assess the resulting seismic hazard.250 383 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Can local earthquake tomography settle the matter about subduction in the Northern and Central Apennines? Response from a new high resolution P velocity and Vp/Vs ratio 3-D model
(2012); ; ;Scafidi, D.; DipTeRis Università di Genova ;Solarino, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, ItaliaAccording to the most common interpretation, the Apennines developed in Neogene and Quaternary times in the hanging wall of a west directed subduction zone. Seismic tomography is the most powerful tool to investigate large volume of Earth at depth, and it has been extensively applied to shed light on the geometry and shape of the subduction under the Italian peninsula. The various experiments were able to display the slab under the Southern Apennines, but even the most recent tomographic images were non-uniquely interpretable and left open questions about the characteristics of the subduction in the Northern-Central sector of the chain. We here present the results of an improved inversion experiment focused on the Northern and Central Apennines. The results do not show any pronounced subduction slab and the most evident anomaly is a low velocity body extending down to 100 km depth, located in a relatively small area under the western Tuscany. On the basis of accurate synthetic tests, we assess that, if established, a subduction like geometry should be visible in our tomographic images. We then conclude that no subduction is imaged in the Northern and Central Apennines. We thus interpret this anomaly as an asthenospheric flow. However, we cannot exclude that our result is due to intrinsic limitations of the methodology. In fact in response to the original question about the capability of local earthquake tomography to settle the matter about subduction, we underline that the absence of deep earthquakes to illuminate the model from below, the existence of seismic gaps in some sectors of the area under study even at shallow depth and the non uniqueness of interpretation of the tomographic images make local tomography unable to give alone definitive information on the deep structure of the Northern and Central Apennines.300 19 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A Complete Automatic Procedure to Compile Reliable Seismic Catalogs and Travel‐Time and Strong‐Motion Parameters Datasets
The compilation of reliable and complete seismic catalogs represents a fundamental issue for most studies in seismology. Nowadays, the availability of an ever-increasing number of stations and, therefore, the huge amount of recordings to be processed and analyzed require a lot of effort in terms of man-hours. In the present work, we present a fully automatic procedure for compiling seismic catalogs starting from continuous recordings. The procedure relies on a multistep algorithm that includes event detection tool, automatic P- and S-phase picker, hypocenter locator, and magnitude and strong-motion parameter calculator. This automatic procedure is applied for compiling seismic catalogs for two real-world usage scenarios starting from the openaccess waveform database provided by European Integrated Data Archive. The first scenario concerns the monitoring of the seismicity of northwestern Italy; the second one concerns the analysis of the data recorded during the first month of the 2016 sequence in central Italy. The comparison between reference manually revised and automatic seismic catalogs points out negligible differences in terms of both P- and S-phase pickings, hypocentral coordinates, and local magnitude values, thus showing the overall reliability of the procedure. The ability of the proposed automatic procedure in detecting and locating very low-magnitude events is prominent to compile automatic catalogs characterized by a magnitude of completeness significantly lower than that of reference manual catalogs.600 360 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Struttura crostale e subcrostale della penisola italiana dalla interpretazione congiunta di immagini tomografiche e profile DSS
(2008-10); ; ; ;Solarino, S.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione CNT, Roma, ItaliaScafidi, D.; Dipteris Università di GenovaQuesto studio rappresenta la conclusione di una serie di analisi precedentemente proposte e volte alla migliore comprensione della struttura profonda della penisola italiana. Tale serie, iniziata con il confronto tra la sismicità crostale e le interpretazioni dei profili DSS (Cassinis e Solarino, 2004; Cassinis e Solarino, 2006), si era successivamente estesa alla struttura litosferica (Solarino e Cassinis, 2005; Solarino e Cassinis, 2007). In ambedue le occasioni lo studio era stato condotto avendo cura di utilizzare le più recenti elaborazioni dei profili e selezionando gli ipocentri con criteri molto restrittivi. Nello spirito dei precedenti lavori, anche in questo caso si è eseguita una analisi congiunta di dati ottenuti con diverse tecniche sovrapponendo alle interpretazioni già esistenti le informazioni ricavate da un recente studio tomografico (Scafidi et al., 2008) effettuato con la tecnica della inversione di terremoti locali (Thurber, 1983).268 219
