Skip to main content
The search returned 47 results
Now showing 1 - 10 of 47
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    RETRACE-3D PROJECT, a multidisciplinary approach for the construction of a 3D crustal model: first results and seismotectonic implications

    The RETRACE-3D (centRal italy EarThquakes integRAted Crustal modEl) Project has been launched with the ambitious goal to build, as first result, a new, robust, 3D geological model of broad consensus of the area struck by the 2016-2018 Central Italy seismic sequence
      170  106
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Emergenza sismica nel centro Italia 2016-2017. Secondo rapporto del gruppo operativo SISMIKO. Sviluppo e mantenimento della rete sismica mobile a seguito del terremoto di Amatrice Mw 6.0 (24 agosto 2016, Italia centrale)

    La rete sismica temporanea installata dal gruppo operativo INGV SISMIKO a seguito del terremoto del 24 agosto 2016 tra i Monti della Laga e la Valnerina, è stata ampliata nel settore settentrionale a seguito dei forti terremoti avvenuti alla fine del mese di ottobre 2016. Successivamente alle due scosse di Mw 5.4 e 5.9 che il 26 ottobre hanno interessato l’area al confine Marche-Umbria tra i Comuni di Castelsantangelo sul Nera (MC), Norcia (PG) e Arquata del Tronto (AP), la geometria della rete è stata estesa di circa 25 km verso nord con l’attivazione di ulteriori tre stazioni temporanee di cui una, da subito, disposta per la trasmissione dei dati in tempo reale e per l’inserimento nel sistema di sorveglianza sismica dell’Istituto Nazionale di Geofisica e Vulcanologia (INGV). Un’ultima stazione è stata inoltre installata nei pressi di Campello del Clitunno in provincia di Perugia ad ovest della sequenza, a seguito del terremoto Mw 6.5 che la mattina del 30 ottobre ha interessato l’intera area già fortemente provata dalla sequenza in corso; questo è stato il più forte terremoto registrato negli ultimi 30 in Italia. A circa 5 mesi dall’inizio dell’emergenza sismica, la rete temporanea conta quindi 23 stazioni che da metà dicembre sono tutte trasmesse in tempo reale ai diversi centri di acquisizione INGV, ovvero Milano, Ancona e Grottaminarda ma soprattutto Roma dove i dati vengono contestualmente archiviati nell’European Integrated Data Archive (EIDA) e integrati nel sistema di monitoraggio e sorveglianza sismica dell’INGV; per la sorveglianza sono incluse solo parte delle stazioni. Nelle ultime settimane, le attività di campagna del gruppo operativo SISMIKO sono state costantemente focalizzate alla cura e alla manutenzione della strumentazione per garantire la continuità della trasmissione e dell’acquisizione dei dati, a volte compromesse da malfunzionamenti legati al maltempo. Alla data di aggiornamento del presente report, non è ancora stata decretata una dismissione o una rimodulazione della geometria della rete sismica temporanea, anche in considerazione della attività sismica in corso a tutt’oggi molto sostenuta. Tutti i dati acquisiti dalle stazioni temporanee SISMIKO, sono distribuiti senza alcun vincolo, al pari dei dati della Rete Sismica Nazionale (RSN, codice di rete IV), ed utilizzati per prodotti scientifici in tempo reale (localizzazioni di sala, calcolo dei Time Domain Moment Tensor -TDMT delle ShakeMaps, ecc) e per l’aggiornamento dei database dell’INGV come l’Italian Seismological Instrumental and Parametric Database (ISIDe) con la revisione del Bollettino Sismico Italiano (BSI), dell’INGV Strong Motion Data (ISMD) e dell’ITalian ACcelerometric Archive (ITACA), dell’European-Mediterranean Regional Centroid Moment Tensors (RCMT) e nei lavori scientifici che utilizzano forme d’onda velocimetriche ed accelerometriche (ri- localizzazioni, studi della sorgente sismica ecc.).
      452  401
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    RETRACE-3D project: a multidisciplinary collaboration to build a crustal model for the 2016-2018 central Italy seismic sequence

    The RETRACE-3D project (centRal italy EarThquakes integRAted Crustal model) focused on the revision of all the available geological and geophysical data in the area interested by the 2016-2018 seismic sequence of central Italy, with the final aim to reconstruct a reliable and consistent 3D geological model of that area. It is based on a collaboration, which was framed into a formal agreement, between Dipartimento della Protezione Civile (the Italian Civil Protection Department), Istituto di Geologia Ambientale e Geoingegneria, and Istituto per il Rilevamento Elettromagnetico of the Consiglio Nazionale delle Ricerche, Istituto Nazionale di Geofisica e Vulcanologia, and Istituto Superiore per la Protezione e la Ricerca Ambientale. The agreement purpose was to develop a project aimed at the geological and seismotectonic characterisation of the crustal volume hosting that seismic sequence. We present and discuss the approach, methodology and results of the project. The 3D geological model of the study area is developed in detail down to a depth of about 12 km, and extended to the Moho based on available regional-scale information. The model is available on the RETRACE-3D project website (www.retrace3d.it).
      3102  360
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Microseismic assessment and fault characterization at the Sulcis (South-Western Sardinia) field laboratory

    The general acceptance of the CO 2 geological storage by stakeholders passes through the assessment and mi- tigation of risks, potentially induced or increased by the disposal activity. Injection of moderate to large quantities of CO 2 in the sub-surface may unbalance local stress and trigger earthquakes if faults are critically stressed, condition that is not easily verifiable. Pilot sites are therefore the best way to proceed further in order to address such challenging issues. In such cases, the reconnaissance of faults and seismicity in the sub-surface, before the onset of activity, is mandatory. In this paper, we present studies carried out in the site where the Sotacarbo Fault Lab is going to be installed. This facility will be located in a very low seismic hazard region of central Mediterranean, where reports on historical large earthquakes are poor. We show results from a series of experiments aimed to monitor the background seismicity around the pilot site. As expected, seismicity is almost absent down to small magnitude close to the future injection-test well. Further seismic imaging of the sub- surface layers obtained by ambient noise tomography offers the ability to resolve the presence of a seismicity- free fault located in the first 200 m below the surface, of which the last episode of activity is difficult to assess. Our results encourage the use of this site to follow the response of the system to injection of small quantity of CO2.
      992  13
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The impact of structural complexity, fault segmentation, and reactivation on seismotectonics: Constraints from the upper crust of the 2016–2017 Central Italy seismic sequence area

    Young and tectonically active chains like the Central Apennines (Italy) are featured by high structural complexity as a result of the overprint of subsequent deformational stages, making interpretation of seismotectonics challenging. The Central Apennines are characterized by the stacking of tectono-sedimentary units organized in thrust sheets. However, extensional tectonics is currently affecting the axial sector of the thrust belt, mostly expressing in extensional earthquakes. Using a large subsurface dataset acquired for hydrocarbon exploration in the region struck by the 2016–2017 Central Italy seismic sequence, we built a comprehensive 3D geological model and compared it with the seismicity. The model primarily shows a series of thrusts developed during the Miocene-Pliocene Apennines orogenesis and inherited normal faults developed during the Mesozoic extensional phase and the Miocene foreland flexural process. These normal faults were segmented and transported within the thrust sheets, and sometimes they still show a clear surface expression. The succession of tectonic stages resulted in a widespread reactivation of inherited structures, sometimes inverting their kinematics with different styles and rates, and disarticulating pre-existing configurations. Such evolution has a strong impact on the seismicity observed in the area, as demonstrated by some examples that show how the seismicity is aligned on segments of inherited faults, both compressional and extensional. Their reactivation can be explained by their favorable orientation within the current extensional stress field. Results feed the debate about the seismogenic potential of faults identified both at depth and surface, which can impact the seismic hazard of the Apennines.
      385  356
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Reservoir Structure and Wastewater-Induced Seismicity at the Val d'Agri Oilfield (Italy) Shown by Three-Dimensional Vp and Vp /Vs Local Earthquake Tomography

    Wastewater injection into a high-rate well in the Val d’Agri oilfield, the largest in onshore Europe, has induced swarm microseismicity since the initiation of disposal in 2006. To investigate the reservoir structure and to track seismicity, we performed a high-spatial resolution local earthquake tomography using 1,281 natural and induced earthquakes recorded by local networks. The properties of the carbonate reservoir (rock fracturing, pore fluid pressure) and inherited faults control the occurrence and spatiotemporal distribution of seismicity. A low-Vp, high-Vp/Vs region under the well represents a fluid saturated fault zone ruptured by induced seismicity. High-Vp, high-Vp/Vs bumps match reservoir culminations indicating saturated liquid-bearing zones, whereas a very low Vp, low Vp/Vs anomaly might represent a strongly fractured and depleted zone of the hydrocarbon reservoir characterized by significant fluid withdrawal. The comprehensive picture of the injection-linked seismicity obtained by integrating reservoir-scale tomography, high-precision earthquake locations, and geophysical and injection data suggests that the driving mechanism is the channeling of pore pressure perturbations through a high permeable fault damage zone within the reservoir. The damage zone surrounds a Pliocene reverse fault optimally oriented in the current extensional stress field. The ruptured damage zone measures 2 km along strike and 3 km along dip and is confined between low permeability ductile formations. Injection pressure is the primary parameter controlling seismicity rate. Our study underlines that local earthquake tomography also using wastewater-induced seismicity can give useful insights into the physical mechanism leading to these earthquakes.
      1014  165
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Strategic use of the underground in an energy mix plan: Synergies among CO2, CH4 geological storage and geothermal energy. Latium Region case study (Central Italy)

    In recent decades, the worldwide demand for energy has been increasing, with an associated rise in CO2 emissions being observed. In such conditions, the development of ‘‘low carbon energy technologies’’ and strategic energy-mix plans is necessary, and an evaluation of the underground energy potential may be a useful step in developing these plans. This evaluation involves the synergic development of such technologies as: coal combustion in combination with CO2 geological storage (CCS), natural gas geological storage (CH4-GS) and geothermal energy (GE), especially in densely populated countries, such as Italy. Currently, 13.7% of Italian energy demand is met by foreign providers. Most of the Italian regions have energy deficits, and the Latium Region (in Central Italy) represents one of those in the worst conditions. This work proposes a methodology to develop energy-mix scenarios, starting in Latium, to identify areas that are potentially suitable for CCS, CH4-GS and GE. Six geothermal systems and one CO2/CH4 storage potential area were identified. Three main scenarios are proposed: (A) a combination of CH4-GS with methane as cushion gas and GE; (B) a combination of CH4-GS with CO2 as cushion gas and GE; (C) a combination of CCS and GE. Scenario A results in a reduction of the regional energy deficit that ranges from 21.8% to 45.6%. In Scenario B, the regional energy deficit reduction ranges from 30.8% to 80.7% and the CO2 emissions reduction ranges from 1.4% to 5.6%, supposing an injection of 20 years. Scenario C shows a decrease in the regional energy deficit that ranges from 15.9% to 22.1%, while the CO2 emissions reduction ranges from 7.1% to 31.3%, over the same time period. The proposed scenarios may be useful not only for the scientific community but also for policymakers as they identify the most reliable energetic strategies. Thus, this case study could be extended to the entire Italian territory with the ultimate goal of reaching energy autonomy in each region.
      240  2
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Overview of the geochemical modeling on CO2 capture & storage in Italian feasibility studies

    CO2 Capture & Storage in saline aquifers is presently one of the most promising technologies for reducing anthropogenic emissions of CO2. In these sites the short-longterm consequences of CO2 storage into a deep reservoir can be predicted by numerical modelling of geochemical processes. Unfortunately a common problem working with off-shore closed wells, where only the well-log information are available, is to obtain physico-chemical data (e.g. petrophysical and mineralogical) needed to reliable numerical simulations. Available site-specific data generally include only basic physical parameters such as temperature, pressure, and salinity of the formation waters. In this study we present a methodological procedure that allows to estimate and integrate lacking information to geochemical modelling of deep reservoirs such as: i) bulk and modal mineralogical composition, ii) porosity and permeability of the rock obtained from heat flow measurements and temperature, iii) chemical composition of formation waters (at reservoir conditions) prior of CO2 injection starting from sampling of analogue outcropping rock formations. The data sets in this way reconstructed constitute the base of geochemical simulations applied on some deep-seated Italian carbonatic and sandy saline aquifers potentially suitable for geological CO2 storage. Numerical simulations of reactive transport has been performed by using the reactive transport code TOUGHREACT via pressure corrections to the default thermodynamic database to obtain a more realistic modelling. Preliminary results of geochemical trapping (solubility and mineral trapping) potentiality and cap-rock stability as strategic need for some feasibility studies near to be started in Italy are here presented and discussed.
      166  221
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Large Earthquakes Driven by Fluid Overpressure: The Apennines Normal Faulting System Case

    Fluid overpressure is a primary mechanism behind fault interaction and earthquakes triggering. The Apennines section within the young Alpine mobile belt is a key locus to investigate the interplay between fluids and faults. Here, seismicity develops along the extending mountain belt and the key role of fluids has been invoked in past large earthquake sequences. In this study, we use seismological data to get improved images of the Apennines normal faulting system, trying to catch evidences for the involvement of fluids in the preparatory phase of large earthquakes. We observe that extension preferentially reutilizes inherited fragments of faults which were assembled during the Mio‐Pliocene contraction, with steep segments that floor on a regional‐scale gently east dipping plane. We find evidences for wide volumes of overpressured fluids at the base of the seismogenic layer, which are connected to the activation of the recent large earthquakes. The recognition of fluids compartments with overpressuring and diffusion molding seismicity is a key to understand faulting processes and possibly develop forecasts scenarios.
      193  70
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Revitalizing vintage seismic reflection profiles by converting into SEG-Y format: case studies from publicly available data on the Italian territory

    In recent decades, geological modeling has significantly evolved, relying on the growing potential of hardware and software to manage and integrate vast datasets of 2D-3D geophysical underground data. Therefore, digitization and integration with other forms of data can often improve understanding of geological systems, even when using so-called vintage or historical data. Seismic reflection data have been extensively acquired mainly for hydrocarbon exploration since the 60s generating large volumes of data. Typically, these data have been for private commercial use and are relatively unavailable for research. However, with time, large volumes of vintage seismic reflection data in many countries worldwide are now becoming publicly available through time-based de-classification schemes. Such data have a great potential for modern-day geo-research, unleashing opportunities to improve geological understanding through re-interpretation with modern methods. However, a downside of these vintage data is that they are often only available in analog (paper, raster) format. The vectorization of these data then constitutes an essential step for unlocking their research potential. In 2018 INGV established the SISMOLAB-3D infrastructure, which is mainly devoted to analyzing digital subsurface data, such as seismic reflection profiles and well-logs, to build 2D-3D geological models, principally for seismotectonics, seismic hazard assessment, and geo-resources applications. In this contribution, we discuss the robustness of the WIGGLE2SEGY code, firstly published by Sopher in 2018, focusing on examples from different tectonic and geodynamic contexts within Italian territory. We applied the SEG-Y conversion method to onshore and offshore raster seismic profiles related to ceased exploration permits, comparing the results with other published archives of SEG-Y data obtained from the conversion of vintage data. Such an approach results in digital SEG-Y files with unprecedented quality and detail. The systematic application of this method will allow the construction of a comprehensive dataset of digital SEG-Y seismic profiles across Italy, thereby expanding and sharing the INGV SISMOLAB-3D portfolio with the scientific community to foster innovative and advanced scientific analysis.
      703  491