Caciagli, Marco
Preferred name
Caciagli, Marco
Email
marco.caciagli@ingv.it
Staff
staff
ORCID
Scopus Author ID
6507829725
49 results
Filters
Settings
The search returned 49 results
Now showing 1 - 10 of 49
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Tephra deposits as chronostratigraphic markers in active tectonic basins (Val d’Agri, Southern Apennines, Italy)
(Elsevier Science Limited:Oxford Fulfillment Center, PO Box 800, Kidlington Oxford OX5 1DX United Kingdom:011 44 1865 843000, 011 44 1865 843699, EMAIL: asianfo@elsevier.com, tcb@elsevier.co.UK, INTERNET: http://www.elsevier.com, http://www.elsevier.com/locate/shpsa/, Fax: 011 44 1865 843010, 2026-12-01); ; ; ; We investigate two sedimentary sections lying above an alluvial conglomerate fan (Q3) within the Val d'Agri valley, a Quaternary active tectonic depression located in the axial zone of the Southern Apennines fold-andthrust belt. Section 1 consists of three superimposed pyroclastic units (VDA1, 2, and 3), each with peculiar stratigraphic and lithological features. Section 2 has intercalated an epiclastic layer enriched in volcaniclastic components (VDA6). Textural features of volcanic particles indicate that products from Section 1 are juvenile derived from primary fallout deposition from volcanic clouds, and litho-stratigraphic features suggest that they were supplied by at least two distinct eruptions. The topmost tephra (VDA1) yields an 40 Ar/ 39 Ar age of 102.4 ± 1.9 ka (±2σ). On the other hand, lithological features of VDA6 in Section 2, and textures of volcanic particles, suggest reworking and re-sedimentation processes of the original tephra. Major elements' geochemical fingerprints allow correlation of the volcanic products with well-known eruptions from Campi Flegrei, namely Cancello (VDA1 and VDA2), Montemaoro/X-5 (VDA3) and Maddaloni/X-6 (VDA6), also recognized in several distal archives around the Mediterranean area. These tephra layers establish a high-resolution chronostratigraphic framework for the host succession. Specifically, the ~109 ka Maddaloni tephra provides a minimum age constraint for the Q3 fan deposition, which is displaced by a system of SW-dipping normal faults. Based on the ~25 m cumulative height of the tectonic scarp, we estimate a throw rate of 0.19-0.23 mm/y for one of the fault splays affecting the eastern flank of the Val d'Agri basin since the Late Pleistocene. These findings demonstrate that the SW-dipping fault system plays a role in the basin's evolution, with deformation rates comparable to the major active faults of the Apennine axial belt.7 14 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Paleoseismic history of the intermountain Rieti Basin (Central Apennines, Italy)
(Katlenburg-Lindau : European Geophysical Society Katlenburg-Lindau : Copernicus GmbH, 2026-01-15); ; ; ; 9 30 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Examples of Rupture Patterns of the 2023, Mw 7.8 Kahramanmaraş Surface-Faulting Earthquake, Türkiye
(Basel : Molecular Diversity Preservation International, 2025-07-02); ; ; ; Field surveys focused on detailed mapping and measurements of coseismic surface ruptures along the causative fault of the 6 February 2023, Mw 7.8 Kahramanmaraş earthquake. The aim was filling gaps in the previously available surface-faulting trace, validating the accuracy of data obtained from remote sensing, refining fault offset estimates, and gaining a deeper understanding of both the local and overall patterns of the main rupture strands. Measurements and observations confirm dominating sinistral strike-slip movement. An integrated and comprehensive slip distribution curve shows peaks reaching over 700 cm, highlighting the near-fault expressing up to 70% of the deep net offset. In general, the slip distribution curve shows a strong correlation with the larger north-eastern deformation of the geodetic far field dislocation field and major deep slip patches. The overall rupture trace is generally straight and narrow with significant geometric complexities at a local scale. This results in transtensional and transpressional secondary structures, as multi-strand positive and negative tectonic flowers, hosting different patterns of the mole-tracks at the outcrop scale. The comprehensive and detailed field survey allowed characterizing the structural framework and geometric complexity of the surface faulting, ensuring accurate offset measurements and the reliable interpretation of both morphological and geometric features.7 44 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Slip localization on multiple fault splays accommodating distributed deformation across normal fault complexities
(2023-10-30); ; ; ; Deformation across structural complexities such as along-strike fault bends may be accommodated by distributed faulting, with multiple fault splays working to transfer the deformation between two principal fault segments. In these contexts, an unsolved question is whether fault activity is equally distributed through time, with multiple fault splays recording the same earthquakes, or it is instead localized in time and space across the distributed faults, with earthquakes being clustered on specific fault splays. To answer this question, we studied the distributed deformation across a structural complexity of the Mt. Marine fault (Central Apennines, Italy), where multiple fault splays accommodate the deformation throughout the change in strike of the fault. Our multidisciplinary (remote sensing analysis, geomorphological-geological mapping, geophysical and paleoseismological surveys) study identified five principal synthetic and antithetic fault splays arranged over an across-strike distance of 500 m, all of which showing evidence of multiple surface-rupturing events during the Late Pleistocene-Holocene. The fault splays exhibit different and variable activity rates, suggesting that fault activity is localized on specific fault splays through space and time. Nonetheless, our results suggest that multiple fault splays can rupture simultaneously during large earthquakes. Our findings have strong implications on fault-based seismic hazard assessments, as they imply that data collected on one splay may not be representative of the behaviour of the entire fault. This can potentially bias seismic hazard calculations.251 163 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , A multidisciplinary approach gives new insights into the shallow structural setting of the Val d'Agri oilfield (Basilicata, southern Apennines, Italy);
The Val d’Agri (VA) oilfield in the Lucanian Apennines (southern Italy), represents the largest onshore in Europe. Since the 1990's, hydrocarbons are produced from a fractured carbonate reservoir with an average extraction rate of 7*104 barrels/day of oil and 3*106 Smc/day of gas. Part of the wastewater has been re-injected since 2006 into a marginal portion of the reservoir by a high-rate well (Costa Molina 2, CM2). Charged by the Italian oil and gas safety authority, the National Institute of Geophysics and Volcanology (INGV) monitors the VA industrial hydrocarbon operations through the research activity of a dedicated working group (CMS, Centro di Monitoraggio del Sottosuolo) and according to the governmental monitoring guidelines. The CMS operates the real-time acquisition and offline analyses of seismic data recorded at 56 seismic stations associated with public and private local seismic networks. The principal aim of the CMS is to investigate the risk associated with industrial activities that can induce or trigger seismic events by producing stress changes within the upper crustal volume. Previous works have highlighted a spatio-temporal relationship between micro-seismicity (ML ≤ 2.2) and wastewater injection, delineating a NE-dipping back-thrust near the CM2. Part of the microseismicity recorded in the southwestern portion of the VA has also been associated with the water level changes of the Pertusillo lake. One of the main challenges is to define an accurate structural setting of the VA to understand the potential of earthquakes in the area and investigate the presence of active faults. The VA consists of a Quaternary extensional tectonic basin and it is one of the areas of highest seismic hazard in Italy (Basilicata, 1857, M7 earthquake). The basin is bounded by two parallel and oppositely dipping normal fault systems: the Monti della Maddalena Fault System (MMFS) on its western side and the Eastern Agri Fault System (EAFS) on the eastern one. The characterization of the ongoing tectonic activity of the MMFS and EAFS, and their hierarchical relationship is still generating debate among the scientific community. We adopt a multidisciplinary approach based on detailed geological-structural, geophysical and seismic analyses, and electrical resistivity tomography, aimed at reconstructing the subsurface geology of the area and recognizing and characterizing the active and capable faults, and the associated potential for local seismic hazard. We present and discuss the results of this work, focusing on the relative location of seismic events that occurred between March and June 2022. The outcomes allow inferring interesting geologic constraints, highlighting the relationships between the distribution of local seismicity and the structural setting of the area in the uppermost crust (depth < 6 km).81 195 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Paleoseismological surveys for the identification of capable faults in urban areas: the case of the Mt. Marine Fault (Central Apennines, Italy).
(2022-09-25); ; ; ; In order to constrain the Fault Displacement Hazard (FDH) of the town of Pizzoli, located 10 km NW of L’Aquila (Central Apennines, Italy), we performed two paleoseismological trenches across multiple fault splays within the hanging wall of the main Mt. Marine active normal fault. Our trenches highlighted the presence of five faults arranged both synthetic and antithetic to the main fault. The fault splays are distributed within an across-strike distance of about 500 m. Each fault segment shows evidence of repeated surface-rupturing earthquakes occurring throughout the Late Pleistocene-Holocene, proving their capability of rupturing the surface during recent earthquakes. Our study shows that multiple parallel fault splays belonging to a principal segmented fault are active during the same time interval, although the slip rates of single faults may be different through time. Our work reiterates the importance of performing paleoseismological investigation for assessing FDH in urban areas.99 182 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Environmental effects and seismogenic source characterization of the December 2020 earthquake sequence near Petrinja, Croatia
(2022-03-26); ; ; ; On 29 December 2020, a shallow earthquake of magnitude Mw 6.4 struck northern Croatia, near the town of Petrinja, more than 24 hours after a strong foreshock (Ml 5). We formed a reconnaissance team of European geologists and engineers, from Croatia, Slovenia, France, Italy and Greece, rapidly deployed in the field to map the evidence of coseismic environmental effects. In the epicentral area, we recognized surface deformation, such as tectonic breaks along the earthquake source at the surface, liquefaction features (scattered in the fluvial plains of Kupa, Glina and Sava rivers), and slope failures, both caused by strong motion. Thanks to this concerted, collective and meticulous work, we were able to document and map a clear and unambiguous coseismic surface rupture associated with the main shock. The surface rupture appears discontinuous, consisting of multi-kilometer en échelon right stepping sections, along a NW-SE striking fault that we call the Petrinja-Pokupsko Fault (PPKF). The observed deformation features, in terms of kinematics and trace alignments, are consistent with slip on a right lateral fault, in agreement with the focal solution of the main shock. We found mole tracks, displacement on faults affecting natural features (e. g. drainage channels), scarplets, and more frequently breaks of anthropogenic markers (roads, fences). The surface rupture is observed over a length of ∼13 km from end-to-end, with a maximum displacement of 38 cm, and an average displacement of ∼10 cm. Moreover, the liquefaction extends over an area of nearly 600 km² around the epicenter. Typology of liquefaction features include sand blows, lateral spreading phenomenon along the road and river embankments, as well as sand ejecta of different grain size and matrix. Development of large and long fissures along the fluvial landforms, current or ancient, with massive ejections of sediments is pervasive. These features are sometimes accompanied by small horizontal displacements. Finally, the environmental effects of the earthquake appear to be reasonably consistent with the usual scaling relationships, in particular the surface faulting. This rupture of the ground occurred on or near traces of a fault that shows clear evidence of Quaternary activity. Further and detailed studies will be carried out to characterize this source and related faults in terms of future large earthquakes potential, for their integration into seismic hazard models.566 422 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Surface Faulting of the 26 December 2018, Mw 5 Earthquake at Mt. Etna Volcano (Italy): Geological Source Model and Implications for the Seismic Potential of the Fiandaca Fault
At Mt. Etna (Italy), volcano-tectonic earthquakes produce impressive surface faulting despite their moderate magnitude (M < 5.5), with historically well-documented ruptures featuring end-to-end lengths up to 6–7 km. The 26 December 2018, Mw 5.0 earthquake represents the strongest event of the last 70 years, with ground ruptures extending for 7.5 km along the Fiandaca fault, a partially hidden structure in the volcano's eastern flank. Field data collected by the EMERGEO Working Group (INGV) are here integrated with high-resolution photogrammetric surveys and geological-morphological observations to enable a detailed structural analysis and to reconstruct the morphotectonic process of fault growth. The deformation zone develops in a transtensional regime and shows a complex pattern, consisting of brittle structures arranged in en-échelon scale-invariant overlapping systems. Offsets and kinematics vary along the strike due to a major bend in the fault trace. We reconstructed a prevailing right-lateral displacement in the northern section of the fault and a dextral oblique slip in the southern one (max 35 cm); the dip-slip component increases southward (max 50 cm) and overall resembles the along-strike pattern of the long-term morphological throw. The kinematic analysis indicates a quasi-rigid behavior of the two fault blocks and suggests a geological model of rupture propagation that explains both the location of the seismic asperity in the northern section of the Fiandaca fault and the unclamping in the southern one. These findings are used to propose a conceptual model of the fault, representing insights for local fault-based seismic hazard assessment.944 177 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , On the origin of micro-earthquakes in geothermal areas (OMEGA): first results from a seismic experiment at Mt. Amiata (Italy)
In a joint project called OMEGA, between GFZ-Potsdam and the Istituto Nazionale di Geofisica e Vulcanologia (INGV), an experimental seismic monitoring system was installed in 2015 near the power plants of the geothermal area of Mt. Amiata (central Italy). The main objectives of this three-year experiment are: i) to monitor the seismic activity connected to any type of seismicity inside the geothermal field, ii) to verify if the low local seismicity rate near Mt. Amiata reported by the INGV bulletin is natural, or due to the sparse distribution of the INGV network, and iii) to discriminate natural from possibly induced seismicity. The eight-station network was extended by a sevenelement seismic array for the first four weeks. The aim of this paper is to present the first automatic hypocentre locations of the joint network/array analysis.356 335 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Surface faulting during the 29 December 2020 Mw 6.4 Petrinja earthquake (Croatia)
(2021-04-19); ; ; ; The 29 December 2020, Mw 6.4 Petrinja earthquake nucleated at a depth of ~10 km in the Sisak-Moslavina County in northern Croatia, ~6 km WSW of the Petrinja town. Focal mechanisms, aftershocks distribution, and preliminary Sentinel-1 InSAR interferogram suggest that the NW-SE right-lateral strike-slip Pokupsko-Petrinja fault was the source of this event. The Croatian Geological Survey, joined by a European team of earthquake geologists from France, Slovenia and Italy, performed a prompt systematic survey of the area to map the surface effects of the earthquake. The field survey was guided by geological maps, preliminary morphotectonic mapping based on 1:5,000 topographical maps and InSAR interferogram. Locally, field mapping was aided by drone survey. We mapped unambiguous evidence of surface faulting at several sites between Župić to the NW and Hrastovica to the SE, in the central part of the Pokupsko-Petrinja fault, for a total length of ~6.5 km. This is probably a minimum length since several portions of the fault have not been explored yet, and in part crossing forbidden uncleared minefields. Surface faulting was observed on anthropic features (roads, walls) and on Quaternary sediments (soft colluvium and alluvium) and Miocene bedrock (calcarenites). The observed ruptures strike mostly NW-SE, with evidences of strike-slip right-lateral displacement and zones of extension (opening) or contraction (small pressure ridges, moletracks) at local bends of the rupture trace. Those ruptures are interpreted as evidences of coseismic surface faulting (primary effects) as they affect the morphology independently from the slope direction. Ground failures due to gravitational sliding and liquefaction occurrences were also observed, mapped and interpreted as secondary effects (see Amoroso et al., and Vukovski et al., this session). SE of Križ, the rupture broke a water pipeline with a right-lateral offset of several centimetres. Measured right-lateral net displacement varies from a few centimetres up to ~35 cm. A portion of the maximum measured displacement could be due to afterlisp, as it was mapped several days after the main shock. Hybrid surface ruptures (shear plus opening and liquefaction), striking SW-NE, with cm-size left-lateral strike-slip offsets were mapped on the northern side of the Petrinja town, ~3 km NE of the main fault. Overall, the rupture zone appears discontinuous. Several factors might be inferred to explain this pattern such as incomplete mapping of the rupture, inherited structural discontinuities within the Pokupsko-Petrinja fault system, or specific mechanical properties of the Neogene-Quaternary strata72 102
