Skip to main content
The search returned 14 results
Now showing 1 - 10 of 14
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Surface ruptures following the 30 October 2016 Mw 6.5 Norcia earthquake, central Italy

    We present a 1:25,000 scale map of the coseismic surface ruptures following the 30 October 2016 M-w 6.5 Norcia normal-faulting earthquake, central Italy. Detailed rupture mapping is based on almost 11,000 oblique photographs taken from helicopter flights, that has been verified and integrated with field data (>7000 measurements). Thanks to the common efforts of the Open EMERGEO Working Group (130 people, 25 research institutions and universities from Europe), we were able to document a complex surface faulting pattern with a dominant strike of N135 degrees-160 degrees (SW-dipping) and a subordinate strike of N320 degrees-345 degrees (NE-dipping) along about 28km of the active Mt. Vettore-Mt. Bove fault system. Geometric and kinematic characteristics of the rupture were observed and recorded along closely spaced, parallel or subparallel, overlapping or step-like synthetic and antithetic fault splays of the activated fault systems, comprising a total surface rupture length of approximately 46km when all ruptures were considered.
      6034  218
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Seismic slip history of the Pizzalto fault (central Apennines, Italy) using in situ-produced 36Cl cosmic ray exposure dating and rare earth element concentrations

    Morphological and geological observations reveal that most Apenninic faults are highly segmented and that the majority of the fault segments are less than 10 km long. Although these faults have undergone numerous paleoseismological investigations, quantitative data remain crucially lacking for a large number of fault segments. Because such data are essential to understanding how these faults have ruptured and interacted in the past and how they might behave in the future, we investigated the Holocene seismic history of the Pizzalto normal fault, a 13 km long fault segment belonging to the Pizzalto-Rotella-Aremogna fault system in the Apennines. We collected 44 samples from the Pizzalto fault plane exhumed during the Holocene and analyzed the 36Cl and rare earth element (REE) contents. Together, the 36Cl and REE concentrations show that at least six events have exhumed 4.4 m of the fault scarp between 3 and 1 ka, with slip per event values ranging from 0.3 to 1.2 m. No major events have been detected over the last 1 kyr. The Rotella-Aremogna-Pizzalto fault system has a clustered earthquake behavior with a mean recurrence time of 1.2 kyr and a low to moderate probability (ranging from 4{\%} to 26{\%}) of earthquake occurrence over the next 50 years.
      118  3
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Role of Viscoelastic Stress Transfer in Long-Term Earthquake Cascades: Insights After the Central Italy 2016-2017 Seismic Sequenc

    Central Italy is characterized by a network of active faults that interact in a complex manner. Coseismic Coulomb stress changes have been invoked by several authors to explain the concentration of moderate-to-strong earthquakes in this region, but none has considered the time-dependent viscoelastic relaxation of the lower crust and upper mantle as a possible additional source of stress changes at a regional scale. Here starting from the 1915 M-w 6.90.2 Fucino earthquake, we calculated the coseismic plus postseismic Coulomb failure stress changes (CFS) due to eight moderate-to-strong earthquakes that have struck Central Italy in the last century and culminated with the 2016-2017 sequence. Results from this modeling coupled with some synthetic tests simulating normal fault earthquakes with different magnitudes allowed us to highlight the importance of postseismic processes. In particular, the viscoelastic stress transfer due to events of M-w >= 6.5 can modify the spatial distribution of CFS on a centennial timescale and therefore trigger events at larger distances. In addition, using these results, we identified other earthquake clusters in the historical catalogue (last 618 years), which, like the 1915-2017 series, were potentially modulated by both coseismic and postseismic processes. Finally, considering our calculations combined with historical and paleoseismological data, we suggest that several faults in Central Italy may be at present close to failure.
      246  123
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      5116  477
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Which Fault Threatens Me Most? Bridging the Gap Between Geologic Data-Providers and Seismic Risk Practitioners

    The aim of the Fault2SHA European Seismological Commission Working Group Central Apennines laboratory is to enhance the use of geological data in fault-based seismic hazard and risk assessment and to promote synergies between data providers (earthquake geologists), end-users and decision-makers. Here we use the Fault2SHA Central Apennines Database where geologic data are provided in the form of characterized fault traces, grouped into faults and main faults, with individual slip rate estimates. The proposed methodology first derives slip rate profiles for each main fault. Main faults are then divided into distinct sections of length comparable to the seismogenic depth to allow consideration of variable slip rates and the exploration of multi-fault ruptures in the computations. The methodology further allows exploration of epistemic uncertainties documented in the database (e.g., main fault definition, slip rates) as well as additional parameters required to characterize the seismogenic potential of fault sources (e.g., 3D fault geometries). To illustrate the power of the methodology, in this paper we consider only one branch of the uncertainties affecting each step of the computation procedure. The resulting hazard and typological risk maps allow both data providers and end-users 1) to visualize the faults that threaten specific localities the most, 2) to appreciate the density of observations used for the computation of slip rate profiles, and 3) interrogate the degree of confidence on the fault parameters documented in the database (activity and location certainty). Finally, closing the loop, the methodology highlights priorities for future geological investigations in terms of where improvements in the density of data within the database would lead to the greatest decreases in epistemic uncertainties in the hazard and risk calculations. Key to this new generation of fault-based seismic hazard and risk methodology are the user-friendly open source codes provided with this publication, documenting, step-by-step, the link between the geological database and the relative contribution of each section to seismic hazard and risk at specific localities
      130  51
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Along-strike variations of strain partitioning within the Apennines determined from large-scale multi-temporal InSAR analysis

    In the Apennine Mountains of the Italian Peninsula, GPS data display 3–4 mm/yr of divergent motion oriented N50°E between the Adriatic and Tyrrhenian coastlines. However, the mechanisms driving this extension remain debated and along-strike variations of extension within the actively deforming belt remain poorly constrained. Here, we derived the first large-scale extensional and vertical velocity field for the Apennines by multi-temporal InSAR analysis of 7 years of Sentinel-1 data at the scale of the entire range, improving the spatial resolution and vertical accuracy of existing GPS measurements. The results reveal along-strike variations of extensional rates and gradients, with extension concentrated on single fault systems in the north, consistent with the loci of seismicity and recent moderate earthquakes, and distributed throughout the central Apennines, where the range is widening. Vertical surface displacements do not resolve any active long-wavelength uplift of the orogenic belt and, on average, show more subsidence than uplift relative to the Tyrrhenian and Adriatic coasts. This work provides the first InSAR-based geodetic map of differential extension and uplift within the Italian Peninsula. Our results are compatible with a pure shear extensional model of the crust, driven by both boundary and gravitational forces.
      37  443
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Localized Afterslip at Geometrical Complexities Revealed by InSAR After the 2016 Central Italy Seismic Sequence

    The Mw 6.5 Norcia earthquake occurred on 30 October 2016, along the Mt Vettore fault (Central Apennines, Italy), it was the largest earthquake of the 2016–2017 seismic sequence that started 2 months earlier with the Mw 6.0 Amatrice earthquake (24 August). To detect potential slow slip during the sequence, we produced Interferometric Synthetic Aperture Radar (InSAR) time series using 12‐ to 6‐day repeat cycles of Sentinel‐1A/1B images. Time series indicates that centimeter‐scale surface displacements took place during the 10 weeks following the Norcia earthquake. Two areas of subsidence are detected: one in the Castelluccio basin (hanging wall of the Mt Vettore fault) and one in the southern extent of the Norcia earthquake surface rupture, near an inherited thrust. Poroelastic and viscoelastic models are unable to explain these displacements. In the Castelluccio basin, the displacement reaches 13.2 ± 1.4 mm in the ascending line of sight on 6 January 2017. South of the Norcia earthquake surface rupture (a zone between the Norcia and Amatrice earthquakes), the postseismic surface displacements affect a smaller area but reach 35.5 ± 1.7 mm in ascending line of sight by January 2017 and follow a logarithmic temporal decay consistent with postseismic afterslip. Our analysis suggests that the structurally complex area located south of the Norcia rupture (30 October) is characterized by a conditionally stable frictional regime. This geometrical and frictional barrier likely halted rupture propagation during the Amatrice (24 August) and Norcia (30 October) earthquakes at shallow depth (<3–4 km).
      138  167
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Surface faulting during the 29 December 2020 Mw 6.4 Petrinja earthquake (Croatia)

    The 29 December 2020, Mw 6.4 Petrinja earthquake nucleated at a depth of ~10 km in the Sisak-Moslavina County in northern Croatia, ~6 km WSW of the Petrinja town. Focal mechanisms, aftershocks distribution, and preliminary Sentinel-1 InSAR interferogram suggest that the NW-SE right-lateral strike-slip Pokupsko-Petrinja fault was the source of this event. The Croatian Geological Survey, joined by a European team of earthquake geologists from France, Slovenia and Italy, performed a prompt systematic survey of the area to map the surface effects of the earthquake. The field survey was guided by geological maps, preliminary morphotectonic mapping based on 1:5,000 topographical maps and InSAR interferogram. Locally, field mapping was aided by drone survey. We mapped unambiguous evidence of surface faulting at several sites between Župić to the NW and Hrastovica to the SE, in the central part of the Pokupsko-Petrinja fault, for a total length of ~6.5 km. This is probably a minimum length since several portions of the fault have not been explored yet, and in part crossing forbidden uncleared minefields. Surface faulting was observed on anthropic features (roads, walls) and on Quaternary sediments (soft colluvium and alluvium) and Miocene bedrock (calcarenites). The observed ruptures strike mostly NW-SE, with evidences of strike-slip right-lateral displacement and zones of extension (opening) or contraction (small pressure ridges, moletracks) at local bends of the rupture trace. Those ruptures are interpreted as evidences of coseismic surface faulting (primary effects) as they affect the morphology independently from the slope direction. Ground failures due to gravitational sliding and liquefaction occurrences were also observed, mapped and interpreted as secondary effects (see Amoroso et al., and Vukovski et al., this session). SE of Križ, the rupture broke a water pipeline with a right-lateral offset of several centimetres. Measured right-lateral net displacement varies from a few centimetres up to ~35 cm. A portion of the maximum measured displacement could be due to afterlisp, as it was mapped several days after the main shock. Hybrid surface ruptures (shear plus opening and liquefaction), striking SW-NE, with cm-size left-lateral strike-slip offsets were mapped on the northern side of the Petrinja town, ~3 km NE of the main fault. Overall, the rupture zone appears discontinuous. Several factors might be inferred to explain this pattern such as incomplete mapping of the rupture, inherited structural discontinuities within the Pokupsko-Petrinja fault system, or specific mechanical properties of the Neogene-Quaternary strata
      71  102
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Complexity of the 2009 L'Aquila earthquake causative fault system (Abruzzi Apennines, Italy) and effects on the Middle Aterno Quaternary basin arrangement

    An Mw 6.1, devastating earthquake, on April 6, 2009, struck the Middle Aterno Valley (Abruzzi Apennines, Italy) due to the activation of a poorly known normal fault system. Structural analysis of the fault population and investigation of the relationships with the Quaternary continental deposits through integrated field and laboratory techniques were conducted in order to reconstruct the long-term, tectono-sedimentary evolution of the basin and hypothesize the size of the fault segment. A polyphasic evolution of the Middle Aterno Valley is characterized by a conjugate, ∼E-W and ∼NS-striking fault system, during the early stage of basin development, and by a dip-slip, NW-striking fault system in a later phase. The old conjugate fault system controlled the generation of the largest sedimentary traps in the area and is responsible for the horst and graben structures within the basin. During the Early Pleistocene the E-W and NS system reactivated with dip-slip kinematics. This gave rise to intra-basin bedrock highs and a significant syn-tectonic deposition, causing variable thickness and hiatuses of the continental infill. Subsequently, since the end of the Early Pleistocene, with the inception of the NW-striking fault system, several NW-strands linked into longer splays and their activity migrated toward a leading segment affecting the Paganica-San Demetrio basin: the Paganica-San Demetrio fault alignment. The findings from this work constrain and are consistent with the subsurface basin geometry inferred from previous geophysical investigations. Notably, two major elements of the ∼E-W and ∼NS-striking faults likely act as transfer to the nearby stepping active fault systems or form the boundaries, as geometric complexities, that limit the Paganica-San Demetrio fault segment overall length to 19 ± 3 km. The resulting size of the leading fault segment is coherent with the extent of the 6 April 2009 L'Aquila earthquake causative fault. The positive match between the geologic long-term and coseismic images of the 2009 seismogenic fault highlights that the comprehensive reconstruction of the deformation history offers a unique contribution to the understanding faults seismic potential.
      433  287
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Fault2SHA Central Apennines database and structuring active fault data for seismic hazard assessment

    We present a database of field data for active faults in the central Apennines, Italy, including trace, fault and main fault locations with activity and location certainties, and slip-rate, slip-vector and surface geometry data. As advances occur in our capability to create more detailed fault-based hazard models, depending on the availability of primary data and observations, it is desirable that such data can be organized in a way that is easily understood and incorporated into present and future models. The database structure presented herein aims to assist this process. We recommend stating what observations have led to different location and activity certainty and presenting slip-rate data with point location coordinates of where the data were collected with the time periods over which they were calculated. Such data reporting allows more complete uncertainty analyses in hazard and risk modelling. The data and maps are available as kmz, kml, and geopackage files with the data presented in spreadsheet files and the map coordinates as txt files. The files are available at: https://doi.org/10.1594/PANGAEA.922582 .
      149  120