Skip to main content
The search returned 23 results
Now showing 1 - 10 of 23
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Feasibility study of an integrated earthquake and tsunami early warning system Scientific Reports

    (London: Springer Nature London: Nature Publishing Group, 2025)
    Rea, Raffaele
    ;
    ; ; ;
    Current Tsunami Early Warning Systems (TEWS) aim to issue an initial alert within minutes after a seismic event, relying on rapid estimates of earthquake source parameters derived from teleseismic and regional seismic data. For coastal areas located in the near-distance range of a tsunamigenic source, reducing this alert time is critical to increase evacuation lead-time and enhance risk mitigation actions. In this study, we evaluate the integration of earthquake magnitude and location estimations from QuakeUp, an impact-based earthquake early warning system (EEWS), into a tsunami early warning system (TEWS) workflow. We investigate the trade-off between earliness and accuracy of the seismic source parameters and their impact on Probabilistic Tsunami Forecasting (PTF). A hindcast of the 30 October 2020 M w 7.0 Aegean Sea earthquake, whose tsunami reached nearby coasts within ~ 10 min demonstrated that QuakeUp can deliver stable and accurate hypocenter and magnitude estimates within ~ 40 s from origin time, comparable to those obtained by the Early-Est software within minutes, used operationally in the Mediterranean area. These rapid parameter estimates were used to run a PTF procedure, yielding runup predictions in reasonable agreement with observations. A second scenario, based on 150 simulated seismogram sets for Mw 6-7 earthquakes in the Messina Strait (Southern Italy) confirmed the ability of the integrated workflow to provide robust source estimates within one minute. This work represents the first demonstration of a combined EEWS-TEWS approach for near-field tsunamigenic earthquakes, highlighting its potential for dual risk mitigation. Tsunamis consist of a series of long-wavelength sea gravity waves that may hit the coasts causing loss of lives and damages to buildings and other infrastructures. These events can be generated by different processes (earthquakes, submarine landslides, volcanoes, or peculiar meteorological conditions). In the last two decades, several earthquakes generated destructive tsunamis that caused hundreds of thousands fatalities 1-3. The damages produced by this kind of events have been strongly mitigated by tsunami early warning systems (TEWS). These systems provide as fast and accurate as possible alerts to people on the coasts of the potentially impending waves. However, for coastlines very close to the epicentre, messages from the TEWS may be too late and the tsunami risk reduction must be based on people's reaction to natural signs 4. In the framework of the NorthEast Atlantic, Mediterranean and connected seas Tsunami Warning and Mitigation System (NEAMTWS) coordinated by IOC-UNESCO, five tsunami service providers (TSP) provide tsunami alert services: the French Tsunami Warning Center (CENALT) 5 , the Italian Tsunami Alert Center (CAT-INGV) 6 , the National Observatory of Athens (NOA) 7 , the Instituto Português do Mar e da Atmosfera (IPMA) 8 and the Kandilli Observatory and Earthquake Research Institute (KOERI) 9. Each of them uses a different seismic network tuned for their different monitoring zones, different seismic velocity models and software for the characterisation of the seismic parameters and (slightly, in some cases) different decision matrices 5-10. Among these TSPs, our analysis focuses on the Italian CAT-INGV. CAT-INGV issues tsunami alert messages based on earthquake parameter estimations provided by the Early-Est algorithm 11. Early-Est uses regional and teleseismic data to estimate earthquakes magnitude and hypocenter coordinates, which in the Mediterranean basin require three/four minutes from the origin time (OT) of the earthquake. These estimations feed a very conservative decision matrix 6 used to convert them into a tsunami warning. A new probabilistic tsunami forecasting algorithm (PTF) is expected to become operational in the CAT-INGV in 2025 12-14. For the chosen tsunami intensity metric (e.g. offshore amplitude), the PTF provides the probability distribution expected at
      4  26
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The EU Center of Excellence for Exascale in Solid Earth (ChEESE): Implementation, results, and roadmap for the second phase

    The EU Center of Excellence for Exascale in Solid Earth (ChEESE) develops exascale transition capabilities in the domain of Solid Earth, an area of geophysics rich in computational challenges embracing different approaches to exascale (capability, capacity, and urgent computing). The first implementation phase of the project (ChEESE-1P; 2018–2022) addressed scientific and technical computational challenges in seismology, tsunami science, volcanology, and magnetohydrodynamics, in order to understand the phenomena, anticipate the impact of natural disasters, and contribute to risk management. The project initiated the optimisation of 10 community flagship codes for the upcoming exascale systems and implemented 12 Pilot Demonstrators that combine the flagship codes with dedicated workflows in order to address the underlying capability and capacity computational challenges. Pilot Demonstrators reaching more mature Technology Readiness Levels (TRLs) were further enabled in operational service environments on critical aspects of geohazards such as long-term and short-term probabilistic hazard assessment, urgent computing, and early warning and probabilistic forecasting. Partnership and service co-design with members of the project Industry and User Board (IUB) leveraged the uptake of results across multiple research institutions, academia, industry, and public governance bodies (e.g. civil protection agencies). This article summarises the implementation strategy and the results from ChEESE-1P, outlining also the underpinning concepts and the roadmap for the on-going second project implementation phase (ChEESE-2P; 2023–2026).
      415  357
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Monitoring the Microseismicity through a Dense Seismic Array and a Similarity Search Detection Technique: Application to the Seismic Monitoring of Collalto Gas-Storage, North Italy

    Seismic monitoring in areas where induced earthquakes could occur is a challenging topic for seismologists due to the generally very low signal to noise ratio. Therefore, the seismological community is devoting several efforts to the development of high-quality networks around the areas where fluid injection and storage and geothermal activities take place, also following the national induced seismicity monitoring guidelines. The use of advanced data mining strategies, such as template matching filters, auto-similarity search, and deep-learning approaches, has recently further fostered such monitoring, enhancing the seismic catalogs and lowering the magnitude of completeness of these areas. In this framework, we carried out an experiment where a small-aperture seismic array was installed within the dense seismic network used for monitoring the gas reservoir of Collalto, in North Italy. The continuous velocimetric data, acquired for 25 days, were analysed through the application of the optimized auto-similarity search technique FAST. The array was conceived as a cost-effective network, aimed at integrating, right above the gas storage site, the permanent high-resolution Collalto Seismic Network. The analysis allowed to detect micro-events down to magnitude Ml = −0.4 within a distance of ~15 km from the array. Our results confirmed that the system based on the array installation and the FAST data analysis might contribute to lowering the magnitude of completeness around the site of about 0.7 units.
      58  122
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A first appraisal of the seismogenic and tsunamigenic potential of the largest fault systems in the westernmost Mediterranean

    The westernmost Mediterranean hosts part of the plate boundary between the European and African tectonic plates. Based on the scattered instrumental seismicity, this boundary has been traditionally interpreted as a wide zone of diffuse deformation. However, recent seismic images and seafloor mapping studies support that most of the plate convergence may be accommodated in a few tectonic structures, rather than in a broad region. Historical earthquakes with magnitudes Mw > 6 and historical tsunamis support that the low-to-moderate instrumental seismicity might also have led to underestimation of the seismogenic and tsunamigenic potential of the area. We evaluate the largest active faults of the westernmost Mediterranean: the reverse Alboran Ridge, and the strike-slip Carboneras, Yusuf and Al-Idrissi fault systems. For the first time, we use a dense grid of modern seismic data to characterize the entire dimensions of the main fault systems, accurately describe the geometry of these structures and estimate their seismic source parameters. Tsunami scenarios have been tested based on 3D-surfaces and seismic source parameters, using both uniform and heterogeneous slip distributions. The comparison of our results with previous studies, based on limited information on the fault geometry and kinematics, indicates that accurate fault geometries and heterogeneous slip distributions are needed to properly assess the seismic and tsunamigenic potential in this area. Based on fault scaling relations, the four fault systems have a large seismogenic potential, being able to generate earthquakes with Mw > 7. The reverse Alboran Ridge Fault System has the largest tsunamigenic potential, being able to generate a tsunami wave amplitude greater than 3 m in front of the coasts of Southern Spain and Northern Africa.
      595  105
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Towards the new Thematic Core Service Tsunami within the EPOS Research Infrastructure

    Tsunamis constitute a significant hazard for European coastal populations, and the impact of tsunami events worldwide can extend well beyond the coastal regions directly affected. Understanding the complex mechanisms of tsunami generation, propagation, and inundation, as well as managing the tsunami risk, requires multidisciplinary research and infrastructures that cross national boundaries. Recent decades have seen both great advances in tsunami science and consolidation of the European tsunami research community. A recurring theme has been the need for a sustainable platform for coordinated tsunami community activities and a hub for tsunami services. Following about three years of preparation, in July 2021, the European tsunami community attained the status of Candidate Thematic Core Service (cTCS) within the European Plate Observing System (EPOS) Research Infrastructure. Within a transition period of three years, the Tsunami candidate TCS is anticipated to develop into a fully operational EPOS TCS. We here outline the path taken to reach this point, and the envisaged form of the future EPOS TCS Tsunami. Our cTCS is planned to be organised within four thematic pillars: (1) Support to Tsunami Service Providers, (2) Tsunami Data, (3) Numerical Models, and (4) Hazard and Risk Products. We outline how identified needs in tsunami science and tsunami risk mitigation will be addressed within this structure and how participation within EPOS will become an integration point for community development.
      445  130
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Sensitivity of Tsunami Scenarios to Complex Fault Geometry and Heterogeneous Slip Distribution: Case‐Studies for SW Iberia and NW Morocco

    The SW Iberian margin is one of the most seismogenic and tsunamigenic areas in W-Europe, where large historical and instrumental destructive events occurred. To evaluate the sensitivity of the tsunami impact on the coast of SW Iberia and NW Morocco to the fault geometry and slip distribution for local earthquakes, we carried out a set of tsunami simulations considering some of the main known active crustal faults in the region: the Gorringe Bank (GBF), Marquês de Pombal (MPF), Horseshoe (HF), North Coral Patch (NCPF) and South Coral Patch (SCPF) thrust faults, and the Lineament South strike-slip fault. We started by considering for all of them relatively simple planar faults featuring with uniform slip distribution; we then used a more complex 3D fault geometry for the faults constrained with a large 2D multichannel seismic dataset (MPF, HF, NCPF, and SCPF); and finally, we used various heterogeneous slip distributions for the HF. Our results show that using more complex 3D fault geometries and slip distributions, the peak wave height at the coastline can double compared to simpler tsunami source scenarios from planar fault geometries. Existing tsunami hazard models in the region use homogeneous slip distributions on planar faults as initial conditions for tsunami simulations and therefore underestimate tsunami hazard. Complex 3D fault geometries and non-uniform slip distribution should be considered in future tsunami hazard updates. The tsunami simulations also support the finding that submarine canyons attenuate the wave height reaching the coastline, while submarine ridges and shallow shelves have the opposite effect.
      628  225
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Tsunami Source of the 2021 Mw 8.1 Raoul Island Earthquake From DART and Tide‐Gauge Data Inversion

    The tsunami source of the 2021 MW 8.1 Raoul Island earthquake in the Kermadec subduction zone was estimated by inverting the tsunami signals recorded by Deep-ocean Assessment and Reporting of Tsunamis (DART) bottom pressure sensors and coastal tide-gauges. The main asperity aftershock distribution and rapid back-projection analysis. Three earthquakes of M ∼8 or larger which also produced moderate tsunamis happened in the 20th century in the same portion of the subduction zone. This is the first great tsunamigenic event captured by the new New Zealand DART network in the South West Pacific, which proved valuable to estimate a robust image of the tsunami source. We also show a first proof of concept of the capability of this network to reduce the uncertainty associated with tsunami forecasting and to increase the lead time available for evacuation for future alerts.
      197  248
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The Making of the NEAM Tsunami Hazard Model 2018 (NEAMTHM18)

    The NEAM Tsunami Hazard Model 2018 (NEAMTHM18) is a probabilistic hazard model for tsunamis generated by earthquakes. It covers the coastlines of the North-eastern Atlantic, the Mediterranean, and connected seas (NEAM). NEAMTHM18 was designed as a three-phase project. The first two phases were dedicated to the model development and hazard calculations, following a formalized decision-making process based on a multiple-expert protocol. The third phase was dedicated to documentation and dissemination. The hazard assessment workflow was structured in Steps and Levels. There are four Steps: Step-1) probabilistic earthquake model; Step-2) tsunami generation and modeling in deep water; Step-3) shoaling and inundation; Step-4) hazard aggregation and uncertainty quantification. Each Step includes a different number of Levels. Level-0 always describes the input data; the other Levels describe the intermediate results needed to proceed from one Step to another. Alternative datasets and models were considered in the implementation. The epistemic hazard uncertainty was quantified through an ensemble modeling technique accounting for alternative models’ weights and yielding a distribution of hazard curves represented by the mean and various percentiles. Hazard curves were calculated at 2,343 Points of Interest (POI) distributed at an average spacing of ∼20 km. Precalculated probability maps for five maximum inundation heights (MIH) and hazard intensity maps for five average return periods (ARP) were produced from hazard curves. In the entire NEAM Region, MIHs of several meters are rare but not impossible. Considering a 2% probability of exceedance in 50 years (ARP≈2,475 years), the POIs with MIH >5 m are fewer than 1% and are all in the Mediterranean on Libya, Egypt, Cyprus, and Greece coasts. In the North-East Atlantic, POIs with MIH >3 m are on the coasts of Mauritania and Gulf of Cadiz. Overall, 30% of the POIs have MIH >1 m. NEAMTHM18 results and documentation are available through the TSUMAPS-NEAM project website (http://www.tsumaps-neam.eu/), featuring an interactive web mapper. Although the NEAMTHM18 cannot substitute in-depth analyses at local scales, it represents the first action to start local and more detailed hazard and risk assessments and contributes to designing evacuation maps for tsunami early warning.
      1678  468
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Insights into Mechanical Properties of the 1980 Irpinia Fault System from the Analysis of a Seismic Sequence

    Seismic sequences are a powerful tool to locally infer geometrical and mechanical properties of faults and fault systems. In this study, we provided detailed location and characterization of events of the 3–7 July 2020 Irpinia sequence (southern Italy) that occurred at the northern tip of the main segment that ruptured during the 1980 Irpinia earthquake. Using an autocorrelation technique, we detected more than 340 events within the sequence, with local magnitude ranging between −0.5 and 3.0. We thus provided double difference locations, source parameter estimation, and focal mechanisms determination for the largest quality events. We found that the sequence ruptured an asperity with a size of about 800 m, along a fault structure having a strike compatible with the one of the main segments of the 1980 Irpinia earthquake, and a dip of 50–55° at depth of 10.5–12 km and 60–65° at shallower depths (7.5–9 km). Low stress drop release (average of 0.64 MPa) indicates a fluid-driven initiation mechanism of the sequence. We also evaluated the performance of the earthquake early warning systems running in real-time during the sequence, retrieving a minimum size for the blind zone in the area of about 15 km.
      60  146
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Probabilistic tsunami forecasting for early warning

    Tsunami warning centres face the challenging task of rapidly forecasting tsunami threat immediately after an earthquake, when there is high uncertainty due to data deficiency. Here we introduce Probabilistic Tsunami Forecasting (PTF) for tsunami early warning. PTF explicitly treats data- and forecast-uncertainties, enabling alert level definitions according to any predefined level of conservatism, which is connected to the average balance of missed-vs-false-alarms. Impact forecasts and resulting recommendations become progressively less uncertain as new data become available. Here we report an implementation for near-source early warning and test it systematically by hindcasting the great 2010 M8.8 Maule (Chile) and the well-studied 2003 M6.8 Zemmouri-Boumerdes (Algeria) tsunamis, as well as all the Mediterranean earthquakes that triggered alert messages at the Italian Tsunami Warning Centre since its inception in 2015, demonstrating forecasting accuracy over a wide range of magnitudes and earthquake types.
      1072  237