Skip to main content
The search returned 16 results
Now showing 1 - 10 of 16
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      196  532
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Influence of seismogenic source geometrical accuracy on PTHA: a test case for the Calabrian subduction interface

    Exploring different degrees of complexities in the geometry of seismic tsunami sources is a key point to optimize Probabilistc Tsunami Hazard Analyis (PTHA), as fault geometry can have an impact on the generated tsunami. In this regard, one major difficulty is represented by the potentially tsunamigenic offshore faults that are generally poorly constrained and consequently the geometry is often oversimplified as a planar fault. We present compared scenarios of PTHA for ruptures located in the Calabrian subduction interface using different source models. The Calabrian subduction, located in the Mediterranean Sea, has occasionally be blamed to have generated some past large earthquakes and tsunamis, despite it shows no sign of significant seismic activity on the shallow portion of the interface. Significant in-slab seismicity is recorded below 40 km depth and a rate of 1-5 mm/yr characterize the convergence between the two plates involved, Africa and Europe. A 3D model of the subduction interface was obtained from the original interpretation of a grid of ca. 60 (9000 km length) seismic reflection profiles (Spectrum – INGV collaborative framework CA-60) coupled with the detailed analysis of the seismicity, providing a highly detailed 3D surface geometry for the first 100 km depth. This model includes both the first order information on the curvature and changes in strike and an accurate reconstruction of the 3D subduction interface, and can be scaled to different levels of detail. We compare simplified planar vs 3D models with different degrees of geometrical complexities in order to estimate the effect of the source geometry on the tsunami generation and propagation pattern.
      154  236
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Focus on the Calabrian Arc subduction: interface, edges, break-off and the accretionary wedge

    The accurately reconstructed geometry of the subduction interface is a crucial element for seismic and tsunami hazard studies that require realistic modelling of future earthquake ruptures. The Calabrian Arc is a cornerstone in the Mediterranean plate-tectonics puzzle and understanding its geometry and behavior may strongly contribute to estimating the seismic and tsunami hazard in the region. Besides, it has occasionally be blamed to have generated some past large earthquakes and tsunamis, despite it shows no sign of significant seismic activity on the shallow portion of the interface. In addition, significant in-slab seismicity is recorded below 40 km depth and a rate of 1-5 mm/yr characterize the convergence between the two plates involved, Africa and Europe. An accurate 3D reconstruction of the Calabrian subduction plate interface based on the interpretation of ca. 9000 km of seismic reflection profiles, provided in the collaborative framework between Spectrum and INGV (CA-60), allows us to detail the architecture of the shallow part of the subduction interface (<20 km). The resulting 3D model images the peculiar features that characterize the Calabrian subduction interface: 1) an external flat at 5-8 km depth located under an accreted Messinian evaporites wedge; 2) a central ramp cutting between 8-14 km depth with high roughness and lateral variations of the dip angle; 3) a deeper flat between 14 and 20 km; 4) the overthrusting over the continental Apulia margin in the northern part; 5) the Subduction Transform Edge Propagator (STEP) fault system guiding the southeastern propagation of the subduction; The deeper part of the subducted slab was reconstructed by analysing the seismicity distribution and the available tomographic data and allows us to highlight the progressive development from north to south of the slab breakoff at 100-150 km depth. The detailed 3D reconstruction allows us to also estimate the rock volume involved in the accretionary wedge building and to compare the geometrical features of the subduction interface with the surficial ongoing processes (i.e. uplift rates) in the Calabrian Arc.
      120  186
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Tectonic model of the 2016, Central Apennines earthquake sequence: implications for seismogenic source identification

    On 24 August 2016 a Mw 6.0 earthquake marked the beginning of a severe seismic sequence that struck Central Italy. This shock was followed by a Mw 5.9 on 26 October, by a Mw 6.5 on 30 October, by two Mw 5.4 aftershocks and by over 30,000 smaller shocks. Based on the widespread occurrence of surface breaks the majority of workers agreed that this sequence was caused by a widely-recognized system of Quaternary normal faults crossing the region, namely the Monti della Laga - Monte Vettore fault system. In this study we use surface and subsurface geological data, coupled with distributions of relocated seismicity and InSAR evidence of ground displacement, to show that the earthquake sequence was caused by the reactivation at depth of tectonic structures inherited from older tectonic phases combined with sympathetic slip along shallow ruptures. In particular we maintain that an inherited thrust fault is the most likely source of the 30 October, Mw 6.5 earthquake, the largest of the sequence. We also propose that the sequence involved slip along a normal fault partially located in the footwall of such thrust, and that this was the source of the 24 August, Mw 6.0 event. This latter fault partially reactivated the thrust in an extensional sense. The 26 October, Mw 5.9 event was caused by the extensional reactivation of an eastern portion of the same thrust; together with the 24 August earthquake this event triggered the reactivation of the whole thrust with extensional kinematics, ultimately leading to the Mw 6.5 shock. The 2016 sequence illuminates several aspects of the seismotectonics of the Central Apennines, casting doubts on a number of hypotheses that were put forward based exclusively on observations of exposed brittle structures. It also shows the key role of reactivated inherited structures as potential sources for large earthquakes, in addition to the activation of younger extensional fault systems.
      301  735
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Ground-motion variability for single site and single source through deterministic stochastic method simulations: implications for PSHA

    The ground-motion median and standard deviation of empirical groundmotion prediction equations (GMPEs) are usually poorly constrained in the nearsource region due to the general lack of strong-motion records. Here we explore the use of a deterministic–stochastic simulation technique, specifically tailored to reproduce directivity effects, to evaluate the expected ground motion and its variability at a near-source site, and seek a strategy to overcome the known GMPEs limitations. To this end, we simulated a large number of equally likely scenario events for three earthquake magnitudes (Mw 7.0, 6.0, and 5.0) and various source-to-site distances. The variability of the explored synthetic ground motion is heteroscedastic, with smaller values for larger earthquakes. The standard deviation is comparable with empirical estimates for smaller events and reduces by 30%–40% for stronger earthquakes. We then illustrate how to incorporate directivity effects into probabilistic seismichazard analysis (PSHA). This goal is pursued by calibrating a set of synthetic GMPEs and reducing their aleatory variability (∼50%) by including a predictive directivity term that depends on the apparent stress parameter obtained through the simulation method. Our results show that, for specific source-to-site configurations, the nonergodic PSHA is very sensitive to the additional epistemic uncertainty that may augment the exceedance probabilities when directivity effects are maximized. The proposed approach may represent a suitable way to compute more accurate hazard estimates.
      729  185
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Assessment of liquefaction potential for two liquefaction prone areas considering the May 20, 2012 Emilia (Italy) earthquake

    Abstract On the 20th and 29th of May 2012, two earthquakes occurred in Emilia-Romagna region (Northern Italy) triggering extensive liquefaction of the subsoil units. The consequences of liquefaction have been observed and reported by several agencies in a widespread area. The most impressive liquefaction manifestations were documented in a zone 3–4 km-long and 1 km-wide, where the villages of Sant'Agostino, San Carlo and Mirabello are located. The existing post-earthquake reports and the availability of geotechnical data provided by in-situ tests consist the basic ingredients for a computation of the liquefaction potential parameters within this zone. In particular, the Liquefaction Potential Index (LPI) and Liquefaction Severity Number (LSN) indexes were evaluated and then correlated by considering liquefaction phenomena either observed on site or not. Thus, the existing classifications of the \{LPI\} and \{LSN\} were evaluated and compared with the observed liquefaction-induced deformations. The latter was applied and validated for the first time within a liquefiable area using post-earthquake data, after the development by Tonkin and Taylor (2013). The outcome of this study shows that a threshold value of \{LPI\} around 13 or 14 is better to be taken into account instead of 5 for discriminating sites where liquefaction surface evidences should be expected from the ‘non-liquefied’ ones. Moreover, from the correlation of the \{LSN\} values with the cases of liquefaction-induced ground disruption it is concluded that the proposed threshold value of 10 fits statistically well with our dataset. In addition, a preliminary correlation of \{LPI\} and \{LSN\} indicates a trend that could be useful in future studies for delineating sites likely to liquefaction.
      305  15
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Hydrothermal system of Central Tenerife Volcanic Complex, Canary Islands (Spain), inferred from self-potential measurements.

    An extensive self-potential survey was carried out in the central volcanic complex of Tenerife Island (Canary Islands, Spain). A total amount of ~237 kmof profileswith 20 mspacing betweenmeasurementswas completed, including radial profiles extending from the summits of Teide and Pico Viejo, and circular profiles inside and around Las Cañadas caldera and the northern slopes of Teide and Pico Viejo. One of themain results of this mapping is the detection ofwell-developed hydrothermal systemswithin the edifices of Teide and Pico Viejo, and also associated with the flank satellite M. Blanca and M. Rajada volcanoes. A strong structural control of the surface manifestation of these hydrothermal systems is deduced from the data, pointing to the subdivision of Teide and Pico Viejo hydrothermal systems in three zones: summit crater, upper and lower hydrothermal systems. Self-potential maxima related to hydrothermal activity are absent from the proximal parts of the NE and NW rift zones as well as from at least two of the mafic historical eruptions (Chinyero and Siete Fuentes), indicating that long-lived hydrothermal systems have developed exclusively over relatively shallow felsic magma reservoirs. Towards Las Cañadas caldera floor and walls, the influence of the central hydrothermal systems disappears and the self-potential signal is controlled by the topography, the distance to thewater table of Las Cañadas aquifer and its geometry. Nevertheless, fossil or remanent hydrothermal activity at some points along the Caldera wall, especially around the Roques de García area, is also suggested by the data. Self-potential data indicate the existence of independent groundwater systems in the three calderas of Ucanca, Guajara and Diego Hernández, with a funnel shaped negative anomaly in the Diego Hernández caldera floor related to the subsurface topography of the caldera bottom. Two other important self-potential features are detected: positive values towards the northwestern Santiago rift, possibly due to the relatively high altitude of the water-table in this area; and a linear set ofminima to thewest of Pico Viejo, aligned with the northwestern rift and related to meteoricwater infiltration along its fracture system.
      366  75
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Pianificazione e preparazione dell’emergenza. L’esercitazione a Santa Sofia (FC) del 26/30 settembre 2011: un esempio di gestione di una crisi sismica

    Nell’ambito della convenzione vigente tra l’Istituto Nazionale di Geofisica e Vulcanologia (INGV) e l’Agenzia di Protezione Civile della Regione Emilia Romagna è stata realizzata a fine settembre del 2011 una esercitazione sul rischio sismico con l’obiettivo di valutare il livello raggiunto nelle procedure che entrambi gli Enti attivano in occasione di una emergenza a seguito di un forte terremoto. La simulazione ha interessato oltre 50 unità di personale INGV, sia in sede che in area epicentrale, appartenenti a diverse Sezioni e sedi INGV (Ancona, Arezzo, Bologna, Irpinia, Milano, Pisa e Roma). La preparazione dell’evento si è fondata sulle esperienze del passato, in primis la lunga emergenza aquilana del 2009 [Margheriti et al., 2010; 2011; Moretti et al., 2011c], con uno sguardo alle nuove esigenze sia interne che esterne (ad esempio le istanze della Protezione Civile). Nonostante gli imprevisti e gli inevitabili errori commessi a cui si aggiunga lo sforzo per mettere insieme tante differenti professionalità e per rispettare sempre al meglio il programma e gli impegni presi con i responsabili dell’Agenzia di Protezione Civile della Regione Emilia Romagna, è stato ampiamente ripagato dall’aver vissuto un’esperienza positiva non solo da un punto di vista professionale ma anche umano. Questa esercitazione si è infatti rivelata un’importante occasione per relazionarsi e confrontarsi con i colleghi solitamente lontani rendendosi conto che da ciascuno di loro è sempre possibile imparare qualcosa. Questa esperienza si è mostrata di fondamentale importanza nella gestione dell’emergenza verificatasi a maggio 2012 in Pianura Padana emiliana [Moretti et al., 2012].
      506  261
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Sea level change along the Italian coast during the Holocene and projections for the future

    Published and new sea level data are used to provide projections of sea level change in Italy for the year 2100 by adding new isostatic and tectonic component to the IPCC and Rahmstorf projections. Comparison of the observations from more than 130 sites (with different geomorphological and archaeological sea level markers) with the predicted sea level curves provides estimates of the vertical tectonic contribution to the relative sea level change. The results are based on the most recent ANU model for the ice sheets of both hemispheres, including an alpine deglaciation model. On the basis of the eustatic, tectonic and isostatic components to the sea level change, projections are provided for marine inundation scenarios for the Italian coastal plains for the year 2100, that today are at elevations close to current sea level.
      160  33