Burrato, Pierfrancesco
Preferred name
Burrato, Pierfrancesco
Web Site
Email
pierfrancesco.burrato@ingv.it
Staff
staff
ORCID
Scopus Author ID
7801584787
Researcher ID
H-2181-2011
189 results
Filters
Settings
The search returned 189 results
Now showing 1 - 10 of 189
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Rise and fall of a hypothesized seismic gap: source complexity in the 16 December 1857, Southern Italy earthquake (Mw 7.0) .
(2008-02); ; ;Burrato, P.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, Italia ;Valensise, G.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Roma1, Roma, ItaliaOn 16 December 1857, a strong earthquake (M ∼7) struck a large portion of the southern Apennines about 150 km southeast of Naples. The earthquake was thoroughly investigated by Irish engineer Robert Mallet, who wrote an extensive report that is still regarded as a landmark in observational seismology. Because of the concentration of damage in the High Agri valley, and contrary to Mallet’s own findings, for many years the earthquake was referred to as the “Val d’Agri earthquake” and was believed by most investigators to have ruptured the 20–25-km normal fault lying beneath this intermontane basin. The magnitude of the earthquake, however, and evidence for earthquake complexity suggest that the true rupture length has been so far underestimated. We contend that the 1857 earthquake ruptured in a cascade fashion two adjacent and relatively well-known faults: first the smaller Melandro–Pergola fault, commonly believed to represent a seismic gap between the causative faults of the 1857 and of the 1980 Irpinia (Mw 6:9) earthquakes; and then the larger Agri valley fault proper. Contemporary chronicles reported a time lapse of 2–3 min between the two ruptures, thus effectively making them two independent shocks. The rupture must have proceeded unilaterally from the northwestern edge of the Melandro–Pergola fault, where Mallet placed the earthquake epicenter, thus explaining the concentration of damage—and attention by rescue crews and subsequent investigators—in the southeastern portion of the High Agri valley.176 882 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Geophysics for Kids: The Experience of the Istituto Nazionale di Geofisica e Vulcanologia (Italy)
(2003-09-01); ; ; ; Paper describing the outreach activities at INGV.256 11 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , 197 223 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Deriving thrust fault slip rates from geological modeling: examples from the Marche coastal and offshore contraction belt, Northern Apennines, Italy.
We present a reconstruction of the central Marche thrust system in the central-northern Adriatic domain aimed at constraining the geometry of the active faults deemed to be potential sources of moderate to large earthquakes in this region and at evaluating their long-term slip rates. This system of contractional structures is associated with fault-propagation folds outcropping along the coast or buried in the offshore that have been active at least since about 3Myr. The ongoing deformation of the coastal and offshore Marche thrust system is associated with moderate historical and instrumental seismicity and recorded in sedimentary and geomorphic features. In this study, we use subsurface data coming from both published and original sources. These comprise cross-sections, seismic lines, subsurface maps and borehole data to constrain geometrically coherent local 3D geological models, with particular focus on the Pliocene and Pleistocene units. Two sections crossing five main faults and correlative anticlines are extracted to calculate slip rates on the driving thrust faults. Our slip rate calculation procedure includes a) the assessment of the onset time which is based on the sedimentary and structural architecture, b) the decompaction of clastic units where necessary, and c) the restoration of the slip on the fault planes. The assessment of the differential compaction history of clastic rocks eliminates the effects of compaction-induced subsidence which determine unwanted overestimation of slip rates. To restore the displacement along the analyzed structures, we use two different methods on the basis of the deformation style: the fault parallel flow algorithm for faulted horizons and the trishear algorithm for fault-propagation folds. The time of fault onset ranges between 5.3-2.2 Myr; overall the average slip rates of the various thrusts are in the range of 0.26-1.35 mm/yr.518 940 - Some of the metrics are blocked by yourconsent settings
Item type:Product, Access status: Open Access , Mostra Terremoti
(2006); ; ; ; Si tratta dei pannelli della mostra "Terremoti: il segreto della Terra", inaugurata il 23 ottobre 2003 in occasione del Festival della Scienza di Genova (25 ottobre-22 novembre, Fiera di Genova). Questa mostra ha avuto 7200 visitatori. Nel 2004 sono stati utilizzati per la mostra "Terremoti e Attrazione Fatale", inaugurata il 28 ottobre 2004 in occasione del Festival della Scienza di Genova (28 ottobre-8 novembre 2004, Ex Manifattura dei Tabacchi, Sestri Ponente, Genova). Questa mostra ha avuto 5000 visitatori. Nel 2005 sono stati rielaborati per la mostra "Terra: viaggio nel cuore del Pianeta" realizzata, dal 4 al 22 maggio 2005, a Roma presso la sede dell’Istituto Superiore Antincendi in collaborazione con il Comune di Roma, la Provincia di Roma e il Corpo Nazionale dei Vigili del Fuoco. Questa mostra ha avuto 4400 visitatori. Nel 2006 sono stati utilizzati per la seconda edizione della mostra "Terra: viaggio nel cuore del Pianeta" realizzata, dal 22 aprile al 18 maggio 2006, a Roma presso la sede dell’Istituto Superiore Antincendi in collaborazione con il Comune di Roma, la Provincia di Roma, la Regione Lazio e il Corpo Nazionale dei Vigili del Fuoco. Questa mostra ha avuto 8000 visitatori.277 290 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Visualising volcanic gas plumes with virtual globes
(2009); ; ; ; Wright, T.; University of CambridgeThe recent availability of small, cheap ultraviolet spectrometers has facilitated the rapid deployment of automated networks of scanning instruments at several volcanoes, measuring volcanic SO2 gas flux at high frequency. These networks open up a range of other applications, including tomographic reconstruction of the gas distribution which is of potential use for both risk mitigation, particularly to air traffic, and environmental impact modelling. Here we present a methodology for visualising reconstructed plumes using virtual globes, such as GoogleEarth, which allows animations of the evolution of the gas plume to be displayed and easily shared on a common platform. We detail the process used to convert tomographically reconstructed cross-sections into animated gas plume models, describe how this process is automated and present results from the scanning network around Mt.Etna, Sicily. We achieved an average rate of one frame every12 min, providing a good visual representation of the plume which can be examined from all angles. Increating these models, an approximation to turbulent diffusion in the atmosphere was required. To this end we derived the value of the turbulent diffusion coefficient for quiescent conditions near Etna to be around 200–500 m2s-1.156 31 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Earthquake-induced landslides: from historical data to new empirical relationships.
Purpose: We present a new database of historical earthquake-induced landslides (EILs) for the Italian territory, developed in framework of the CFTI5Med historical earthquake catalogue (https://storing.ingv.it/cfti/cfti5/) with a twofold goal: 1) extending back in time the knowledge of seismic induced environmental effects so as to be able to forecast scenarios of future large events (i.e. with M>5.5), and 2) to develop new empirical relationships connecting landslide distribution and seismic parameters. Method: We first revised the database of seismic-induced environmental effects connected to the CFTI historical seismic catalogue, collecting and analysing new historical sources and revising those already studied in the past. In addition, we analysed recent scientific articles and technical reports and made comparisons with other digital archives such as the CEDIT (https://doi.org/10.4408/IJEGE.2012- 02.O-05) and the EEE catalogues (http://eeecatalogue.isprambiente.it/). As a second step, we tried to accurately locate the historical EILs in a GIS environment using the coeval descriptions and comparing them with topographic maps and geographic names. In some cases, it was possible to associate individual EILs with landslides already included and described in the Italian Landslide Inventory (IFFI database https://www.progettoiffi.isprambiente.it/). The third step was aimed at the development of new empirical attenuation relationships using the implemented database. To do so, we related the variation of EILs density with distance from the epicentre as a function of the earthquake magnitude. The seismic events were subdivided into three magnitude classes to account for the different extent of the maximum area affected by EILs and released energy. In addition, using the shake maps of 38 out 159 historical earthquakes of our dataset, we also developed a new empirical relationship relating the variation of EILs density with distance as a function of the peak ground acceleration. Results: The result of this work is a new database of historical EILs, composed of more than 1,000 landslides associated with more than 150 historical earthquakes or seismic sequences occurred between 117 b.C.E. and 1997. Each EIL is classified on the basis of the accuracy of its location and of the slope movement type. The updated dataset is collected in the new CFTI Landslides database, connected to but independent from the CFTI5Med database, and it is publicly accessible online through a dedicated open-source geographic interface, designed to be interoperable with both INGV and external databases through dedicated web services. As empirical results, we found that the cumulative density of EILs decreases with distance from the earthquake epicentre following a power law relationship and the power law relationship derived from PGA value shows the increasing landslide density with increasing acceleration, defining a threshold value of PGA between 0.2-0.3 g. Conclusions: The implementation of the new historical EIL database for the Italian territory, on one hand allowed for a better definition of the environmental effects triggered following large earthquakes, on the other hand, dramatically increased the number of data points available for deriving empirical relationships and consequently their statistical significance.30 1 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , The Database of Individual Seismogenic Sources, DISS 3.1.1: new twists and turns
(2010-09-06) ;DISS, Working Group; ; ; The Database of Individual Seismogenic Sources (DISS) was conceived at the end of the 1990s by a group of scientists at Istituto Nazionale di Geofisica e Vulcanologia. The database was designed to host data about seismogenic source models intended to serve as geological input for ground-shaking SHA applications and was continuously updated since then. In 2005 there was a big turn in this process as we launched a new version of the database (DISS 3) which augmented the database with two innovative categories. The first, now named “Composite Seismogenic Source”, was intended to overcome the inherent difficulties in identifying fault segment boundaries. The second, named “Debated Seismogenic Source”, was devised to host tectonic information about active faults that have been proposed in the literature as potential seismogenic sources but are not fully parameterized or are considered to be not reliable or have been deprecated by subsequent work. In 2005 the database was first made available to the public through a specifically designed web-based GIS application. This new database is now being widely used in various branches of ground-shaking SHA practice and tsunami hazard. The main strength of this database is that it stores fault parameters in a native 3D and flexible conceptual model. Lately, we also developed strategies to make it testable with independent data under a number of different tectonic and seismic hypotheses. During the years, DISS brought together a large amount of published and original data on Italian seismogenic sources having a potential for a magnitude 5.5+ earthquake and is now being extended to the rest of the Euro-Mediterranean area. We present highlights on the identification and characterization of new seismogenic sources in three key-areas in Italy, namely Lombardia/Veneto (Southern Alps), Adriatic Sea, and Abruzzo/Molise (central Apennines). These new sources describe youthful structures of the Alpine south-verging contractional system, the external fold-and-thrust system in the Adriatic offshore, and the extensional domain of the inner central Apennines.1170 420 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Reply to: Comment on ‘Insights from the Mw 6.3, 2009 L’Aquila earthquake (central Apennines) - Unveiling new seismogenic sources through their surface signatures: the adjacent San Pio Fault’
(2011); ; ; ; We reply to a comment by Messina et al., who strongly criticized our paper on the San Pio Fault, by showing that in areas of complex geology such as the central Apennines, where the current tectonic setting results from the superposition of different tectonic regimes, the equation: “most visible active fault = major seismogenic fault” can be misleading.418 82 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Repeated surveys reveal nontectonic exposure of supposedly active normal faults in the central Apennines, Italy
We investigate the geomorphic processes that expose bedrock fault surfaces from under their slope-deposit cover in the central Apennines (Italy). These bedrock fault surfaces are generally located at various heights on mountain fronts above the local base level of glacio-fluvial valleys and intermountain fluvio-lacustrine basins and are laterally confined to the extent of related mountain fronts. The process that led to the exposure of fault surfaces has often been exclusively attributed to coseismic earthquake slip and used as proxy for tectonic slip rates and earthquake recurrence estimations. We present the results of monitoring the contact between the exposed fault surfaces and slope deposits at 23 measurement points on 12 different faults over 3.4 year long observation period. We detected either downward or upward movements of the slope deposit with respect to the fault surface between consecutive measurements. During the entire observation period all points, except one, registered a net downward movement in the 2.9–25.6 mm/yr range, resulting in the progressive exposure of the fault surface. During the monitoring period no major earthquakes occurred in the region, demonstrating that the measured exposure process is disconnected from seismic activity. Our results indicate that the fault surface exposure rates are rather due to gravitational and landsliding movements aided by weathering and slope degradation processes. The so far neglected slope degradation and other (sub)surface processes should thus be carefully taken into consideration before attempting to recover fault slip rates using surface gathered data.693 147
